Sound distorted after updating

I have iPod Touch 4th Gen, I was running the 4.2.2 iOS or something like that as it wouldnt allow me to update.
I found a way of updating last night by editing the host file, so I went straight to iOS6.
Since updating the sound is incredibly distorted. Tested with my iPhone 4S (iOS6) and working fine.
Looked around on forums and people had the same problem when upgrading got iOS5?
Done sound check etc and hasn't fixed the problem, it is 100% the update.
Any suggestions would be much appreciated.
Thanks

Sorry.
Try the standard fixes:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • Laptop Sound distorted after updating to Windiws 10

    I have a HP Pavilion dv6 laptop which I have been using for some time now. I recently updated to Windows 10. Since then, my laptop's speakers do not seem to be working propery. There is a distortion in the sound and there seems to be a double echo when listening to sounds, especially when I am using headphones. The audio devide is IDT High Definition AUdio Codec. The device manager says that the device is workinh properly. However, the problem seems to be continuing. Is the problem due to the new WIndows system or do I need to update any drivers? 

    I have a HP Pavilion dv6 laptop which I have been using for some time now. I recently updated to Windows 10. Since then, my laptop's speakers do not seem to be working propery. There is a distortion in the sound and there seems to be a double echo when listening to sounds, especially when I am using headphones. The audio devide is IDT High Definition AUdio Codec. The device manager says that the device is workinh properly. However, the problem seems to be continuing. Is the problem due to the new WIndows system or do I need to update any drivers? 

  • Sound distortion after virtual sound installation on Satellite A80

    My sound distorts after i install virtual sound, it is driving me mad. I downloaded all the toshiba drivers.

    Hello
    Usually the sound should be much better using this tool. I can really not explain why this happen. Try to reinstall sound driver.
    The unit is delivered with WXP Home and I assume that you try to install your own OS, probably professional edition. All drivers and tools should work properly with WXP professional too. Please check the installation instructions that can be also downloaded from Toshiba download site (http://support.toshiba-tro.de/tools/Satellite/sa80/win-xp/install-xp-na.zip). All this stuff must be installed in particular order.
    Bye

  • IPad speaker sounds blown after update

    Speakers sound blown after update. Help

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • 8460p - sound distortion after BIOS update

    After updating BIOS to v F05  experience sound distortion at random times.
    Driver reinstallation does not help

    Figured out - the problem is with HP Power Assistant. This program does something periodically and this makes sound distortion once in a minute or so.
    Killing the process solves the issue. But it is a workaround to listen music normally.
    Is anybody from HP looking at this forum?

  • Sound Distortion After Todays QT update.

    We just updated our G5s here at the lab (Quick TIme and Garageband ), and now the sound output is extremely distorted and crackly regardless if its a video on cnn.com or a song off iTunes. Tried Zapping the PRAM and repairing permissions, even reinstalled QT from the standalone installer on apple.com to no avail. Any ideas?
    Message was edited by: Liquidity X

    Hmm...if the sound is distorted in all applications, then it doesn't sound like an update of QT or Garageband could have caused it. Are you using the internal speaker for sound, or some type of studio monitors? If you are using speakers other than the internal speaker, I would change the output device over to the internal speaker and see if you get the same problem. You can change the sound output device by going to system prefs->sound->output-> and selecting "internal speaker". If it is still crackling or you have only been using the internal speaker, plug in a pair of headphones and see if the sound crackles there as well.
    If the crackling goes away when you switch output devices or plug in headphones, then the problem is with the individual output device (speakers). You may want to check your connections to make sure the speakers are properly plugged in.

  • HDMI sound error after updating to 10.8.5

    Hi everyone,
    Im using the latest mac mini with 2.3 quad-core ML version 10.8.5 and a small LCD TV as a screen. Low frame rate killing my eyes but that's my only option for now.
    Now the problem: after updating my mac, when I boot it up, sound is fine. After waking up from sleep, it's gone. It has to be the update because I did not make any other significant changes.
    It's not urgent but it would be great if someone knew the solution.
    Thanks

    Updates typically trigger issues with Digital sound that are best resolved through the Audio Midi Setup tool under Applications -> Utilities.  Sometimes zapping the PRAM can also help a newer machine such as yours.  If you have an older machine than 4 years, don't zap it before checking the PRAM battery, which is separate from any battery that lets you run off the mains on a notebook Mac.

  • Itunes sound issue after update

    After i updated itunes all my music files sound like this:
    http://www.roadbullettransport.com.au/itunes.wav
    Any idea's on how to fix this?

    I have the same problem after updating to version 10.5.0.142
    Any ideas?

  • Games color looks distorted after update

    Hi just to find out what can I do to fix the problem with color distortion after win 8 update? 

    Update graphic card driver.
    Visit the website of the graphic card manufacturer to download and install the latest driver.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Sound distorted after exporting, but is fine in Premiere

    Hi,
    The project sounds fine in premiere, (and yes, I checked to make sure it doesn't clip above 0db), but when I export it as an mpg, the mic'd track sounds distorted / a bit garbled.
    The really curious thing is that sometimes if I export just the first minute, the problem track sounds fine...but for longer clips or the full movie, the track sounds distorted...including the same section at the beginning which sounded fine as a shorter clip.
    Now I am using the dynamics effect on the problem track, but (1) it has worked fine in other projects, with exact same settings (2) it sounds fine in premiere (3) it isn't clipping according to the premiere level monitors.
    Does anyone know how I can fix this?
    Screen shot of export settings:

    I should also add that I am able to export the entire movie without distortion if I turn the dynamics effect off...However, the track really does need this effect, so I'd love to know why it's causing the problem. Again the stumper of why the effect sounds fine in a short clip, but that same section sounds garbled if it extends to a longer clip.

  • Sound distortion after downloading artworks

    I am using the latest version of itunes 7.0.1.8
    It has seemed ok, until yesterday i decided to click on get album artwork.
    The artwork was downloaded fine but the noice quality immediately after and since has been awful. I can only describe it as an interferance / distortion. It is a constant sound regardless of teh beat / tone of teh music. When i use any other program to run sounds or music (windows media, audacity, windows sounds) it works fine UNLESS itunes is running. If itunes is running all noise on teh machine is unbearable.
    As soon as i exit itunes, all sound is good again.
    When i first upgraded to itumes 7 i had some sound qulaity issues , thyat were resolved by the latest upgrade, but this is an altogether different and more prevalent sound.

    Goto the PC makers site and update your sound card/drivers
    In Windows goto Control panel>Quicktime>Audio tab check "Safemode" hit OK and reboot the PC for settings to take
    If that doesn't work try the steps here http://docs.info.apple.com/article.html?artnum=93610

  • Sound gone after update - no such file or directory

    I updated my mythtv machine tonight, sound is gone.  I get an arts informational message that "device: default can't be opened for  playback (no such file or directory)
    Sound was working fine before the upgrade.
    I got some alsa errors right after upgrade, just before the logon screen, but couldn't locate them in any log.  I reran alsaconf and it seemed to set up fine.  Running alsamixer gives me just one column, (playback) rather than the multiple mixer columns I had previously.  alsactl store does not save the setting I put in here.
    The upgrades included ivtv-utils; there was something about using jack as a control; I'm still trying to figure out exactly what jack is and how it might fit into all of this, but I downloaded and ran qjackctl, it failed with error messages.
    [bump]
    cat /proc/asound/cards
    0 [CX8801         ]: CX88x - Conexant CX8801
                          Conexant CX8801 at 0xfb000000
    but there is also a 82801H ICH8 Family HD Audio Controller on this machine.  The module snd_hda_intel is loaded according to lsmod.
    This thread
    http://bbs.archlinux.org/viewtopic.php?id=43755
    may be related.
    Last edited by timm (2008-02-29 03:50:30)

    I'm not an expert, but I do have experience with the cx88xx cards and sound. Mine is an NVidia force 2 board, but I believe it still uses the snd-intel module.
    Do you get sound in any other applications besides myth?

  • Sound problems after updating to ios7?

    Even though the sound IS turned on, all games are without sound after the update - how do I get the sound back? Is it possible to reverse the update?
    because I don't like it one bit!

    Even though the sound IS turned on, all games are without sound after the update - how do I get the sound back? Is it possible to reverse the update?
    because I don't like it one bit!

  • Total Sound Loss After Update

    My computer is completely silent after the most recent update (and was working immediately prior to it). I can't get sound out of Firefox, iTunes or even various games on my computer.
    Not sure what specs I need to provide. If someone could let me know I'll be right on it.

    Hi, after reviewing your screenshot, there are some Flash files for IE that are missing and also for FF.
    Download the Uninstaller to your Desktop:
    http://kb2.adobe.com/cps/141/tn_14157.html
    Then download the Flash Player Installer for Internet Explorer to your Desktop:
    http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    Then download the Flash Player Installer for Firefox to your Desktop:
    http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
    After you have done that, be sure to follow the instructions on the Uninstaller. Use the Administrator account, disable any apps that use Flash, check the system tray for messenger service, etc. Set the Security via Internet Option to Medium for the Internet Zone.
    Close all browsers, Run the Installer from the Desktop.When finished, Reboot(restart) your computer. When fully Rebooted, Reboot again( to clear old files) Then Run the Installer for IE and when finished, Run the Installer for Firefox.
    When finished, Reboot the computer Once.
    Test each browser here:
    http://www.adobe.com/software/flash/about/
    Check a few websites to see if Flash Player is now working properly with each browser.
    Let me know, if you have any questions.
    Thanks,
    eidnolb

  • Aduio distortion after update?

    After i did the update something wrong is happening with the audio
    it distorts whate ever i listen (you tube, i tunes, editing) everything else.
    Strange distortion on audio
    Macbook Pro 17''
    Processor  2.2 GHz Intel Core i7
    Memory  4 GB 1333 MHz DDR3
    Graphics  Intel HD Graphics 3000 384 MB
    Mac OS X Lion 10.7.5

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook 2> /dev/null; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

Maybe you are looking for