Sound distorted after upgrade to windows 10

sound playing is generalldistorted after upgrade to windows 10 pro. Individual sound elements in windows sound scheme seem to be OK.

Yup, you're not the only one with audio problems. I have a HP Split X2 also, my model is the m121-sa. The problem is that the company that makes the audio chips is IDT which has been sold to a new company called Tempo Semi Conductors (This has been done in early 2014). The new company will have to provide new Windows 10 drivers to support our audio chips, whilst they have made Windows 10 drivers for their newer chips; our old ones has no current drivers made officially for Windows 10. Microsoft are aware of this problem and will not be making any drivers - their solution is to use the Microsoft drivers by unistalling the driver through device manager and updating the driver to the Microsoft High Definition ones. The problem with the HP Split is that you loose beats audio and the audio is quiet, but it works on all apps. NEITHER HP OR MICROSOFT WILL PROVIDE A DRIVER That is above the IDT .6499. It is upto Tempo Semi Conductors to do this and they don't provide end user drivers but OEM's like HP. The problem only lies with metro apps, win32 apps such as Chrome has audio working... If you are having problems with the audio being quiet with the HP Windows 8 drivers (IDT), use the following settings. (though, I think my laptop is defective, but my warranty is gone so, I just turn up the treble - even though it sounds high pitched)  On a side note, my other laptop (Toshiba) have been good by providing drivers for all components - Hopefully, Tempo do provide support for IDT as not only HP but other companies also use this chip. By the way, do you problems with start menu being black and blurrly text? For some reason, Windows 8 drivers don't do this but Intel Windows 10 drivers do this. Miracast also only works on the .37 driver and not the newest Windows 10 driver; will need to test this further. Yes there are new TEMPO drivers, but these again  are for the new chips and not our old ones. It didn't work on my HP Split but you can try them below: http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71717.html - notes for new driver 6.10.6504.0 http://ftp.hp.com/pub/softpaq/sp71501.exe - setup 6.10.6504.0 (64 BIT ONLY; WILL NOT WORK ON 32BIT) 32bit driver is 6.10.6503.0 EDIT: HP seems to be deleting my images. Not sure why. 

Similar Messages

  • Some Ringtones Distorted After Upgrading to IOS 5

    Has anyone else noticed that some of the ringtones sound distorted after upgrading to IOS 5?  For example, Sherwood Forest is one of those ringtones.  Please let me know if you have experience the same and what workaround, if any, has worked for you?

    Not sure if this will help... I had problems playing almost everything and it behaved very erratically... Here was the solution that worked for me:
    Altered from original solution from Emily P:
    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Sync
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on, sync, and everything should copy back onto it.
    Working now !!!!!

  • No sound after upgrading to Windows 8 HP G60-553NR Notebook

    I recently upgraded to Windows 8 from Windows 7 64-bit on my HP G60-553NR and went through 3 tiers of tech support with Windows because after upgrading to Windows 8 Pro.... I had no sound coming from my speakers from my notebook nor will sound play when headphones are plugged in. Windows Tech support said that there are no compatable sound drivers to download, which leaves me with no sound completely which is no bueno. So, is there a driver that I can download that will work on my notebook?! If not, how do I downgrade to Windows 7. I'm a DJ and I really need some sound like asap. Thanks in advance for your assistance. Thanks

    Do an HP system recovery to get back.
    If you have discs - put first in and boot.
    If not, you can go into settings from CHarms and advanced to select recover. Here's more: http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03489643
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • S3-S440 no wifi after upgrading to Windows 8.1

    After upgrading to windows 8.1, the wifi is not working anymore.
    I cannot find the wifi driver in the device managerment and I cannot see any information about wifi driver.
    I try to re-setup the driver many times and checked the wireless module was enabled in the BIOS. But it is no progressing at all. I can only access to the Internet through the wire now...
    Please help me.!!!

    Salheureux, welcome to the forum.
    You should go into the Control Panel / Sound to assure that your sound device is set to Default.  Also, right click on the speaker icon in the Taskbar / Playback devices and check that your speakers are displayed.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan

    Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan through Adobe, although Scanner says its combatible with Windows 8. Cannot reinstall drivers because Brother claims they're built-in. Help!

    1. Re: Reinstalled Adobe Acrobat XI Pro after upgrading to windows 8.1 and now cannot scan
    Anubha Goel
    I am using a Brother MFC 8460N and on Brother's site it says its compatible with win 8.1 and that the driver is already installed. When I try to scan I am told there is no preset (there was with win 7 though) and I have to "custom scan." When I try that, I hear a sound as if the printer is trying to scan, but the feeder can't pull the paper through. I then get a blank .pdf as my scan. Thanks for your advice. I will try that.

  • USB device keeps disconnecting/connecting after upgrading to Windows 8.1

    I have a device(Pedal for Sim Racing) connected via USB, everything is working fine in Windows 7 and 8 but after upgrading my machine to Windows 8.1 the device keeps disconnecting and connecting for like every 2 seconds. But after I open the Property Sheet
    in Game Controllers panel the disconnection issue was gone, if I reconnect the device the issue persist. Other people who have similar device also encounters the same issue after upgrading to windows 8.1. The issue persist with or without the device driver
    installed. 
    Any idea, what might cause this? 
    Best regards
    mark

    I'v got this exact same problem with my Win 7 desktop.  I've also got pedals and wheel but don't see it as different than all the other USB devices.  I'm using a bunch of USB, but no hubs, including 3 external storage hard drives. But the momentary
    disconnect appears in all devices as best as i can see..even my long time trouble free head phones..keyboard..and all.  Sometimes the sound goes away and if I unplug and replug them the sound comes back, and other times I have to exit and re enter the
    game. I also get video crashes ..maybe not related.IDK..and have to restart all, because I've got three black screens in Eyefinity. For years my system was trouble free and its just slowly started getting worse. I've thought it had to do with system "sleep"
    etc but long ago went to never sleep max performance etc..Makes no difference. Keep thinking its my hardware or my house wiring etc..But can't seem to solve it. I replaced my Mobo/chip/ram maybe 6 months ago and that appears to have not helped.  It seems
    to be getting worse. I hate to start replacing parts piece by piece..cost a lot of money and sometimes doesn't help.
    When I'm playing a game I can often hear "faint" sound of USB connect disconnect happening with regularity..that little bing/boink sound etc..So it must just be constantly happening...Seems weird. Didn't have anything like this happening years
    ago with pretty much the same hardware and same Win7 with the continuing updates etc.
    What can be causing this common problem?

  • No Audio Output after Upgrading to windows 7; Soundblaster Card is installed

    After upgrading to Windows 7 Ultimate (64-bit), I found that my speakers (which are built into my HP w2207 monitor) are not recognized.  In the notification area I have the speaker with a red x in it, and it says “No Audio Output Device is installed”.
    I have a HP Pavilion D4890Y with the Sound Blaster Audigy X-FI 24-Bit Xtreme sound card.  I tried looking in Device Manager, and found “Multimedia Audio Controller” under Other, which states no drivers could be found.
    I tried following some of the advice online, and downloaded the latest Realtek High Definition Audio drivers, but and the download seems to run successfully, but I don’t notice any differences.  When I reboot as prompted, I’ve still got the same error.
    I then tried forcing the Audio Device to use a Realtek driver, but Windows protests (saying it’s not sure it’s compatable with my device, and I end up with “Realtek High Definition Audio” under “Sound, video and game controllers”, but it has a yellow exclamation point.  If I click properties, the device status says “This device cannot start (Code 10).” If I try to update the driver I get the message that it cannot find the driver software.   If I uninstall the driver I’m back to the original problem (multimedia audio controller under original devices, with no known drivers).
    I also tried downloading various files from the Creative site, but it’s not clear which one to use, and the 4 or 5 different ones I tried (including their recommended beta version for Windows 7), when each of them opens it says it can’t find any supported devices.
    Suggestions?  Thanks!
    This question was solved.
    View Solution.

    Hi,
    "If the driver is a previous revision install it using the TROUBLESHOOT COMPATIBILITY tool that is part of the Windows 7 OS.
    To use the tool, uninstall any drivers for the sound card you show listed in Control Panel/Programs/Uninstall Programs  list.  Delete the Device from Device Manager. 
    Download the revision of the driver from www.creative.com  website to a folder you've created and placed on your desktop.
    After the driver is downloaded, navigate to the "setup.exe" of the driver and Right Click - select Troubleshoot Compatibility  ----
    Let the compatibility tool select a possible solution then use its suggestion of TRY RECOMMENDED WINDOWS SETTINGS, if it does not find a solution it will submit only CUSTOMIZE SETTINGS and let you install it as you designate."
    The preceding information comes from a Microsoft Windows 7 forum regarding an issue similar to yours.
    the information you provided did verify that it is a sound blaster XiFi Extreme card as checked against the Vendor / Device list.
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • 2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

    Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment.  In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • After upgrading to windows 8, spectre 14 usb3 slow

    are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

    Hello rumbacha.  I understand you're trying to locate some drivers for your SPECTRE for Windows 8.  
    There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have.  This document can show you where the product number is located.
    Once I have this I will attempt to locate the drivers for you.
    Have an excellent day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

    after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
    Although IE11 works, it doesn't work correctly.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After upgrade to Windows 8.1, ipod nano 7th gen not recognized

    /after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen.  I have uninstalled and reinstalled ITunes but no luck.  I have gone through all steps in troubleshooting, but it still doesn't recognize it.  Help!

    Hi cindywindy,
    If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Maybe you are looking for