Sound Distortion from Macbook Pro 2.33ghz

Hey, within the last couple of months I have been having some problems with the sound output on my Macbook Pro, it seems that whenever the mac hits over 80 Degrees C the sound would on occasion go all distorted, you can not listen to it. It happens in videos or listen to music in iTunes.
It tends to happen a good bit! My macbook would idle at 70+ Degrees with only some programs running like firefox, netnewswire, mail and adium! So the temperature would creep up quite quickly to 80+ if I start to do anything!
Any suggestions to solve this problem? I have the Mac on a stand to keep it cool! So goodness knows what it would run at on the desk!

Yes, it appears the X1600 has more than its fair share of issues. I've seen reports of people reflowing the solder joints on/around the GPU with success, even baking the LB in the oven.
The rest is something you'll have to take up with Apple.

Similar Messages

  • Some kind of sound coming from macbook pro 13', some kind of sound coming from macbook pro 13'

    some kind of sound is coming from system

    Liquid spills, why your MacBook chassis is a one-way valve for spills
    After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
    The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
    Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
    After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
    There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
    Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
    In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
    In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
    contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.  

  • Sound distorted on macbook pro since I have downloaded 10.7.3.

    Hi all,
    This is through my headphones out of the jack or USB using a dac. Any ideas?
    It sounds like the bass is distorting even at low volumes.
    I've tried my headphones in other devices and are fine.
    Thanks
    Paul

    iDVD does not come with Lion and you can not download it.  You can purchase it here for example: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES

  • No sound from Macbook Pro after restart or sleep

    I know there are a lot of threads on this type of issue, but I haven't found a way to solve my problem.
    My computer:
    Late 2008 MBP 15" OSX 10.9.5
    Whenever I shutdown or sleep the computer, the sound does not work when I start it up or wake it up. The startup sound does not play, and the audio controls are not greyed out. Audio does not work through headphones either. Plugging in and unplugging headphones does not solve the problem.
    Sometimes a PRAM reset will solve the problem, and an SMC reset always brings the audio back, but only until I shut it down or put it to sleep again.
    Any help in finding a permanent solution to this problem would be greatly appreciated.
    Thank you!

    Hello CoDean,
    Continue your troubleshooting with the article below to assist with the issue of not sound on your MacBook Pro. Look at the headphone jack to see if there is a red light coming from there as well as looking in System Preferences > Sound to see if the output is stuck on digital out. 
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/en-us/HT203186
    Take care,
    -Norm G. 

  • The sound on my macbook pro is not working

    The sound on my macbook pro is not working. When I increase the sound, the icon appears as if everything is working, but no sound comes from the speakers. Earphones don't work either. I have tried a PRAM reset but at times, this doesn't even work. It's really frustrating having to restart my computer every time I want the sound to work, and even when I do that, theres a 50 50 chance of it working again. It generally happens after my laptop goes to sleep and I wake it up. Has anyone else had this problem and fixed it or even know what caused it?
    There are a lot of discussions around the earphone jack but I have checked that. I've tried a PRAM reset which hasn't worked, and my sound output is set to Internal speakers.
    HELP!!

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • The sound on my Macbook Pro does not work.

    The sound on my Macbook Pro does not work.  When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done.  I went into system preferences, but there aren't any options there that I can see to change it. 

    "Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
    Au contraire. TS1574's title and affected products are thusly:
    "Troubleshooting issues with no audio from built-in speakers on Macs
    Products Affected Mac mini, MacBook, MacBook Pro, iMac"
    As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
    So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
    1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
    2. Remove any external audio devices from USB, firewire, etc.
    3. Open Sys Prefs > Sound > Output
    If Internal Speakers is listed, select it and test again.
    If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
    If mute is selected, unselect it.
    If the volume slider is low, raise the volume.
    If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
    I hope it gets resolved for you. Good luck.

  • I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
    9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    10. Reset the NVRAM.
    11. Reset the SMC.
    12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    13. Make a "Genius" appointment at an Apple Store.

  • Troubleshoot Sound output for Macbook Pro 2009

    macbook pro 2009 Sound output choice does not drop down anything but "internal speakers" choice. HDMI cable streams video and no sound. Have swapped out HDMI and it recognizes no sound for either. I think it could be a faulty adaptor for HDMI cable connection? It used to work fine then it stopped working and gave me a planet screen on TV when video was playing fine on computer. I tried again after software updates and a new hard drive and now it streams the video but sound only comes out of internal speakers. Wondering if I could be missing something on my mac before I buy another adaptor.

    Another option, if you need a multi-channel sound support is to use a Optical cable like -
    http://www.monoprice.com/Product?c_id=102&cp_id=10229&cs_id=1022902&p_id=1557&se q=1&format=2
    From MacBook Pro (13-inch, Mid 2009) - Technical Specifications (all the other Macs from 2009 also support optical digital audio).
    Audio
    Built-in stereo speakers
    Built-in omnidirectional microphone
    Combined optical digital output/headphone out (user-selectable analog audio line in)
    Supports Apple Stereo Headset with microphone

  • Native hdv editing on macbook pro 2,33GHz and 2GB RAM

    Hi,
    I intend to start editing native hdv on my portable mac. It has a 15,4" monitor, ati mobility radeon X1600 256MB graphics card, 160GB 5400rpm hard disk and a FW800 port. The output will either be hdv to tape or DVD. Can you tell me if it will be a stable configuration?
    What about the preview on my monitor - will it be hdv 1440 x 900 resolution? What will be the impact on the color correction process? And about the disk - is 5400 rpm enough or should I try to change it to 100GB 7200rpm or maybe store it all on a FW ext disk? Is it true that if you capture to your hard disk and then transfer it to a FW ext disk the chances of having dropped frames are much less?
    I'm just upgrading now to HDV filming and editing so I have all these basic questions and doubts. I hope you understand and help me out. Thanks.
    MacBook Pro 2,33GHz   Mac OS X (10.4.7)   2GB RAM

    It's not good to use your internal drive to run OS X and import footage. Here is some information from Final Cut Pro's manual.
    If you need to fit a lot of media files on a relatively small hard disk, such as a
    PowerBook (or Macbook Pro) hard disk, you can recompress all your media files. This is the phase of the offline/online workflow when you create the low-resolution, offline quality media files for rough editing.
    Format______________________ Format Typical data rate
    OfflineRT (using Photo JPEG)__ Varies between 300-500 KB/sec.
    DV (25)_______________________3.6 MB/sec.
    HDV (1080i)__________________3.6 MB/sec.
    Your internal drive should be fine for OfflineRT editing as the format uses much less data rate, so your drive can run the OS and Final Cut Pro at the same time.
    The manual tells you how to use the OfflineRT format. It's quite cool!
      Mac OS X (10.4.8)  
      Mac OS X (10.4.8)  

  • Video transfer from Macbook Pro to iPad mini

    How do you transfer videos from Macbook Pro to iPad mini?

    Take your file and use handbrake to convert the video file to m4v to play in iTunes then sync to iPad Mini

  • The Sound On My MacBook Pro Isn't Working

    The sound on my MacBook Pro is usually fine, but today it didn't work. For example, I tried listening to music on iTunes and watch videos but the volume wouldn't work at all. When I go to turn up the volume, it seems to turn up ok, but when I try to put on some music, it doesn't work at all. I then tried using my brother's Apple headphones on my MacBook Pro, and then the sound worked normally. I really would like this fixed so if someone could help me that would be great, because I don't want to keep using my brother's headphones just to watch a video or listen to music. Thank you to anyone who helps!

    Hey
    I did a NVRAM reset, and nothing happened. The sound stayed the same. Whats an audio output port, where can you find it, and where can you find the red light? When I try turning up the volume, instead of turning it up a cross sign appears under the speaker, thus no volume turns up. The menu bar right at the top of the screen - the speaker icon is not black, but more a very light grey.
    Thanks for helping though!

  • The sound on my macbook pro does not work if I plug headphones in I can still hear but it will not project volume out loud and when I try to turn up the volume it is just greyed out what do I do ?

    The sound on my macbook pro will not project anything if I plug in headphones I can hear but when I take them out and try and turn up the volue the speaker is grey and the bars under it are white with a no volume sign ( circle with a line through it) how do I fix this ?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • How to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    how to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
    or, you can read the link below on how to do it in dos mode.
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
    once you've formatted it - you can now use it in both your macbook and windows computer.

  • How do i stop the chiming sound on my macbook pro?

    There's an annoying chiming sound on my Macbook Pro that goes off sporadically when I have the volume turned up and I have no idea how to turn it off.  I'd like to make it go away.  Any answers would be appreciated.
    Thanks.

    Check the iCal app to make sure you don't have a periodic event set up to go off every so often.
    Or check the Date & Time preference pane in System Preferences to make sure the clock isn't set to chime on the hour.

  • How do i transfer my data from macbook pro to iMac?

    i just bought a iMac.  How do i transfer my itunes library, photos, files via bluetooth from macbook pro to my iMac?  Much thanks for your help!

    I believe that when you boot your computer for the first time and you are following the onscreen instructions you are prompted whether you want to transfer data from an old mac or PC. If you click 'transfer from an old mac' and follow the onscreen instructions, this may work.
    If you have already skipped this step you could use iCloud to transfer data. If you make sure that everything you want to transfer is synced in iCloud, this may also work.

Maybe you are looking for