Sound Distortion playing DVDs with Audigy2 Va

Last time I have problems playing DVD movies on my computer: The sound is distorted
by scratches like an old vinyl. I am using a SB Audigy 2 on Win XP. I have tried several software DVD players, reinstalled the old drivers from CD and cleanly installed teh newest drivers via internet auto update. I also tried to update my VIA chipset drivers, deactivated several background programs etc.
I found out that disabling the sound acceleration in DXDiag removes the sound distortion but then the sound (speech, effects) within a movie are extremly quiet compared to the music.
Another thing: First I deinstalled completely the software and drivers from my audigy to replace it with new ones. Then I had to notice that the new Audio Control Center does not support the option to send bass-frequencies to my subwoofer. I could set the speakers to 5. but had no chance to get my subwoofer working. At the moment I have status quo by using new drivers, but my old creative applications for configurating my speakers.

Ijust checked the preferences, go to Disc Setup and on the bottom in the Audio section, check off the box that says "Disable Dolby dynamic range compression" see if that helps.

Similar Messages

  • MOVED: Sound Distortion Playing CD With SATA CD/DVD Player

    This topic has been moved to Off-Topic Technical.
    https://forum-en.msi.com/index.php?topic=151236.0

    Hi:
    See if performing each of Resolution Steps 2, 3, 4 and 5 from the link below restores functionality to the DVD drive.
    One of them normally will.
    http://support.microsoft.com/kb/314060

  • No sound when playing DVDs, yet fine with bluray

    my sony bluray does not have sound when playing dvds. it acts fine when using blu ray. any suggestions?

    Hello jc1942_69, thank you for your message. Welcome to SONY Community!
    For further assistance, please let us know with the model number of your Blu-ray disc player. As alternative, you can check the link below: http://esupport.sony.com/US/p/support-info.pl?info_id=264
    However, to troubleshoot your Blu-ray disc player in a general way. Follow the steps below:
    1. Turn the Blu-ray Disc player on and make sure the correct video input is selected on the TV.
    2. Press the Home button on the Blu-ray Disc player remote.
    3. Once the menu is displayed, press the Left arrow button on the remote and navigate to Setup.
    4. On Setup, use the Down arrow button and go to Resetting and press the Enter button.
    5. Under Resetting, select either Reset to Factory Default Settings or Initialize Personal Information.
    NOTES:
    Reset to Factory Default Settings option will display another menu where you can reset the current network, audio and video settings on the player, select All Settings if you desire to restore everything.
    Initialize Personal Information will erase all personal information stored on the player and some Internet apps.
    6. Go through each of the two options if you desire to completely restore the Blu-ray Disc player.
    Hopefully this post helps you! 

  • Playing dvds with vob formats on mac?

    my mac pro os x 10.6.8 uses vlc and real time players which don't play dvds with vob format. The mac dvd player 4.6 was recently installed, but it fails to work on mac. Dvd player 3.1.1 also failed as an older version. Whhat would be the right mac dvd player version to use on my mac?

    That seems to be the general consensus from what i am reading, memorex is terrible media! Something else to note, the DVD played fine on two other MACs that were running OSX on 10.6.5 and 10.6.6. the issue is on the machine that is running 10.5.8. Could it just be a compatibility issue with the operating system not being up to date?
    BTW, the stills are PPT slides converted to JPGs, and yes i am importing them as slide shows.

  • Play DVD with audio sound via Airport Express speakers

    Is it possible to play my DVD with audio sound via my Airport Express speakers?
    I can play music with iTunes trough these speakers, it would be nice if I can hear my DVDs aswell.
    iMac intel core duo   Mac OS X (10.4.7)  

    Not using Front Row.
    The real issue here is that audio and video stream at different speeds and it is hard to maintain sync. You know how when you hit play within iTunes it takes a while for the song to start through the speakers? It's the same with the DVD. So you'd need to work an offset into the audio when playing a DVD and it's not an exact science.
    You can download VLC player and mess around with the offset, then you'll also need a program like Airfoil to be able to force audio through the airport express.
    Good luck!

  • Playing DVDs with 5.1 sound

    I connected Bose Companion 2 speakers to the stereo jack of MBP. The problem is when I play DVDs that come with 5.1 Dolby Digital Sound, some of the sound effects cannot be heard as they are channels not picked up by the stereo jack. Is there any way that they can be mixed into 2 channels so that they can be heard thru the speakers ?

    Ijust checked the preferences, go to Disc Setup and on the bottom in the Audio section, check off the box that says "Disable Dolby dynamic range compression" see if that helps.

  • Can't Play DVD (with VLC, Totem, Xine, MPlayer), But Works in Windows

    I have a DVD that I can't play for the life of me in Arch. I've tried VLC, Totem, Xine, and MPlayer. And I do have libdvdcss installed. Other DVDs work fine.
    With VLC the DVD menu comes up, but when I hit play I get choppy sound and no picture. And I get these errors:
    [0x7f91f4000c18] main input error: ES_OUT_RESET_PCR called
    [0x7f91f4000c18] main input error: ES_OUT_RESET_PCR called
    [0x15c0a08] a52 decoder: A/52 channels:2 samplerate:48000 bitrate:192000
    No accelerated IMDCT transform found
    [0x7f91f4000c18] main input error: ES_OUT_RESET_PCR called
    [0x7f91f4000c18] main input error: ES_OUT_RESET_PCR called
    [0x15c0a08] libmpeg2 decoder error: invalid picture encountered
    [0x12839a8] a52 decoder: A/52 channels:2 samplerate:48000 bitrate:192000
    No accelerated IMDCT transform found
    [0x15c0a08] libmpeg2 decoder error: invalid picture encountered
    [0x15c0a08] libmpeg2 decoder error: invalid picture encountered
    [0x15c0a08] libmpeg2 decoder error: invalid picture encountered
    With Totem I get the DVD menu and when I hit play it just freezes.
    With Gxine I just get a popup window that says "Media stream scrambled/encrypted" (but again I do have libdvdcss, libdvdread, and libdvdnav installed). In the terminal Gxine reports it's using libdvdcss to get the encryption keys and it appears to all go fine, but then I get the "Media stream scrambled/encrypted" popup window.
    Mplayer plays the the DVD but the image is scrambled and the sound is a little choppy.
    On the other hand, in Windows, on the same computer, the DVD plays fine with an older version of VLC (0.8.6d) and with Media Player Classic with the K-Lite Codec Pack.
    I'm especially baffled that VLC does it in Windows, but not in Arch (nor in Debian).
    Any thoughts? Thanks.

    cb474 wrote:
    Rasi wrote:Welcome to copyprotection hell. Many dvds are not only encrypted using css, but with several other mechanisms too. Such dvds cannot be played back on linux. It might work with one of the commercial players, but definately wont work with free tools.
    That's interesting. I didn't realize it was all css. But how does that explain in this case the DVD did work with free players in Windows. As I said, both with Media Player Classic with the K-Lite codec pack and with an older version of VLC (0.8.6d)? Thanks.
    That is very possible. All those players use (or can use) direct show. As soon as you have the needed filter installed by SOME software all those players will be able to make use of it. And i think Vista even had dvd filters pre-installed.
    Btw. One of the more common protections on dvds is called arcos and is developed by Sony. Google for it
    Last edited by Rasi (2009-08-18 21:32:56)

  • Having sound distortions in games with M-Audio Revolution 7.1

    I'm having sound distortion problems with a couple of games. I think this started a few OS X updates ago, but not sure which one. Two known games are Quake 3 and Quake 4. When I run either of them, the sound is deep and distorted.
    I'm sure an update of OS X broke m-audio's revolution driver. I currently have driver version 1.4.1. I only have distortions when sending sound output to my sound card. Sound sent to internal speaker comes out fine. I also tried with a freshly created user and freshly reinstalled driver & prefs. Same problem.
    I've tried M-Audio's site with no luck for solutions. It's been a year or so since they have updated it.
    Is anyone else having similar experiences with their M-Audio Revolutions?
    PM 1.25DP G4 (MDD)   Mac OS X (10.4.7)   Revolution 7.1

    Information taken from M-audio's site about Mac Reqs:
    All Platforms
    • available PCI card slot
    • CD-ROM drive
    Apple Macintosh®
    Minimum Required (for stereo operation)
    • Apple Macintosh® G4*
    • Mac OS 9.2.2 or later; Mac OS X version 10.2.6 or later
    • 256MB RAM
    Minimum Required (for multi-channel operation)
    • Apple Macintosh® G4* 733MHz QS
    • Mac OS 9.2.2 or later; Mac OS X version 10.2.6 or later
    • 256MB RAM
    Recommended
    • Apple Macintosh® G4* 800MHz QS or better
    • DVD-ROM drive
    • Mac OS X version 10.3 or later (Apple DVD Player required or AC-3 or DTS)
    • 512MB RAM
    *CPU Accelerator cards are not supported
    I dont think the Card will fully work with your Machine, because of your BWG3's specs.
    Reading the basic info, for Multi-Channel Operation aka Surround Sound you comptuer is not at Spec as it states it requires 733MHz G4 QS min, 800MHz G4 QS recommended.
    Message was edited by: lz3broc
    Message was edited by: lz3broc

  • PLaying dvd with enternainment center ( vista versio

    Hello
    I've got this error when I want to play a dvd with creative enternainement center "format not support or something like that " ?
    http://img52.imageshack.us/img52/9246/dvdco5.jpg
    Someone know how to resolve this problem ?
    I don't have problem if I use wmp or power dvd without the creative software.

    Come on CL at least say some thing you wanted us to pay for shipping of a bad product you can at least say your working on it or dont care?Im starting to wonder if some one new? for sound would be better at least with there support it would be nice to have fully functing software ?with out having to us other peoples hacks to make it work. So say something before you lose all your customers do to lake of support?Message Edited by kww9825 on 07-25-200708:5 AM

  • Satellite 1100-Z14: I get the only picture but no sound when playing DVD's

    I know mine is a fairly old notebook,but despite updating with latest firmware, I have an intermittent problem when playing DVD's (Reg 2) in that I get the picture but no sound, particularly with some older DVD's.
    CD's are ok.
    Toshiba repair agent says it is a software problem and they only deal with hardware problems.
    Can anyone tell me how I can deal with this problem please ? ( apart from getting a later model ! )

    I think I may have stumbled on the problem, I use IntervideoDVD7 and under audio effects there is an option
    'Sydney Theatre' etc, I changed it to 'off' and the sound cames back. maybe I should study their manual a bit more !

  • Playing dvds with vlc ... no right-click and 'open with vlc' option???

    i searched discussions for this question but wasn't sucessful ... so here's my question:
    i use a toshiba pc laptop and an iMac G5 ... in order to watch dvds (with different region codes) on my PC, I use VLC with great success ... I wanted to do the same on my iMac, but came across the following problem:
    when I want to watch a DVD on the laptop, i simply right-click the title and go for 'open with VLC' (which gives me the menu and so on) ... when I try to do this on the iMac, however, there is no
    'open with VLC' option when I right-click the DVD ... I can open single chapters of the DVD by opening the single .vob files, but I'm not happy with doing that ...
    any ideas how to make watching DVDs with VLC on my iMac as easy as it is on my laptop?
    thanx for your help!
    2.1 GHz iMac G5 1.5 GB DDR2 SDRAM   Mac OS X (10.4.6)  

    found the solution by myself: open vlc, open the playlist and drag the dvd onto the playlist, then hit play ...

  • Playing dvds with quicktime

    i just purchased the component to quicktime that allows me to play DVDs on quicktime but i still cant get my dvds to play in quicktime. when i put the dvd into my computer it doesnt open up with quicktime and when i look at the differnt files there are so many different video files on the dvd and none of them open up with quicktime. how do i get my dvds to play in quicktime now that i downloaded the mpeg2 player for quicktime?

    Even though it is not encrpypted it could still be in transport_stream format and the component will not play it. Try this freeware. The Mac version will play transport_stream, so maybe the new Windows version will also. Mpeg StreamClip

  • Can't play DVDs with Totem

    I cannot get Totem (Movie Player under GNOME) to play unencrypted or encrypted DVDs. Although it works fairly well with mplayer, I'd rather use Totem. Whenever I insert a DVD, Totem starts automagically (as it should) but spits out an error saying that a plugin is missing. I've installed every required gstreamer plugins along with libdvdcss (for encrypted DVDs). I know I could use VLC or GMplayer or Totem-xine but frankly I'm baffled that this won't work under Arch but works fine under Ubuntu (I dual boot between these two distros). Thanks in advance.

    I think it has to be said that playing DVDs is not one of totem-gstreamer's strengths at the moment.  The Movie -> Play Disc 'Whatever' menu option just gets me the error about not having the appropriate plugins, even though I have the whole collection installed.  The command line "totem dvd://" will play a DVD but without either DVD menus or the ability to successfully change the audio track (so no viewing Night Watch without learning Russian first, for example!).
    Swapping out totem for totem-xine ought to get working DVD playback with menus; however, if you're going to install xine-lib then you might as well go the whole hog and install xine-ui or kaffeine, both of which are much better movie players IMHO.

  • Ticking sound when playing MP3s with Realplayer on...

    When I transfer MP3 music onto my phone and play it with realplayer, there is a ticking sound about every three seconds. It is farely quiet but gets to be annoying. It makes no differance if I use headphones or not. I was wondering if there is a way to correct this problem.

    i wish it were that simple (mute button)
    Everyone I work with is having the same problem, presently Apple's Music Match is not working.
    I certainly hope they will be able to fix this as soon as possible.

  • No sound when playing DVD video

    Hi,
    I have a K8T NEO2-FIR, Win XP pro. Basic system runs just fine. I have installed an LG DVD-ROM drive model GDR-8163B.  When I play a DVD video there is no sound at all.  On the other hand, there is sound when playing a music CD.  I am using the on-board sound (no additional sound card installed).
    I must be missing something pretty basic.  Any guidance would be appreciated.

    ...sounds like you need to configure the DVD playing software (PowerDVD, WinDVD, WMP, etc.)...

Maybe you are looking for