Sound distortion problems, help p

Hi I recently bought the Sound Blaster X-Fi Xtreme audio but i've been having problems with it. First of all i installed the sound card. Then when turning computer back on i went into bios and disabled the audio function thats in the integrated peripherals then saved and exited. When i got onto my desktop i installed all the drivers and was prompted to restart my computer when i did another driver update came up and i was prompted to install that (even though it says vista at the top and i have xp...) anyways i installed it and restarted my computer again. This time my desktop wouldnt come up. Instead i was brought to a blue screen that said windows has been disabled to prevent any physical damage or sumtin like that. I tried everything but it kept going to that screen. So i took the sound card out, enabled my integrated sound card and started up comp. It worked. So I tried again, installed sound card and disabled integrated sound card when i got to windows i installed drivers and all and now everything works but theres a problem. The sound is a little distorted. Its off and on too, like sometimes when im listening to music the bass is HORRIBLE then other times its ok. Volume doesnt affect it though so i dont know what is changing it. Ventrilo always sounds bad, when i switch channels the robot voice has a crappy echo and sounds terrible. A few other weird things that went on was when i tried installing the sound card a second time i uninstalled the realtek hd audio thing that came on comp and i had on board sound disabled...even still i heard sound (this was before i put my sound card in that second time) So if your still reading this any tips? I think what might be the problem is my on board sound and the sound blaster x-fi are playing at the same time since i couldnt ever figure out how to make my sounds stop. I dont know too too much about comps though so who knows. Tnx for reading.
ALSO im not using a usb headset i've got the plugs going into my sound card...

So this distortion occurs on all songs from any
playlist but didn't use to be present on the same
songs?
MB67
exectly,
every song now has a click click click click sound at the start and during the song and a small hissing sound during the song. Very strange and weird.
Any suggestions welcome

Similar Messages

  • I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    JoBautista,
    you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

  • How I fixed my Toshiba Satellite sound distortion problem

    I've been trying to get the garbled sound recording problem fixed on my Satllite L745-S4210 for months. I have been on this forum and other forums. Alot of people have given me their time trying to fix it, but I managed to do it myself. In the Microphone Properties Advanced Section is a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!

    Satellite L745-S4210
    garbled sound recording   ...   a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!
    Thanks for that contribution.
    The box should be labeled "enable garbled recording."
    -Jerry

  • [SIS Series] Sound distortion problems

    This computer is 3 years old. I got it from new. Every 6 months I have stripped it out completely to get evrything cleaned. It has always been no problem . This time though when I started it up the sound was distorted as though there was a problem with the speakers. I tried the audio on the Monitor speakers and the result was the same. So that ruled out the speakers. I done a re-run and stripped everything out and reinstalled it again but still the same sound problem. Below are the specs. Can anyone help me with this problem. Could it be the processor as I inadvertently bent one of the pins, tried to straighten it and it came off. Or is the Motherboard on the way out.
    Operating System   Microsoft Windows XP Home Edition
    OS Service Pack   Service Pack 2
    DirectX   4.09.00.0904 (DirectX 9.0c)
    Computer Name   DEEPSEA (Top Dog)
    User Name   Barney
    Motherboard   
    CPU Type   Intel Pentium 4, 1900 MHz (19 x 100)
    Motherboard Name   MSI MS-6533(G)  (3 PCI, 1 AGP, 1 CNR, 2 DIMM, Audio)
    Motherboard Chipset   SiS 645DX
    System Memory   512 MB  (DDR SDRAM)
    BIOS Type   Award Modular (08/13/02)
    Communication Port   Communications Port (COM1)
    Communication Port   Communications Port (COM2)
    Communication Port   ECP Printer Port (LPT1)
    Display   
    Video Adapter   NVIDIA GeForce4 MX 420  (64 MB)
    3D Accelerator   nVIDIA GeForce4 MX 420
    Monitor   Proview LCD 15-inch 568/BMM568 [NoDB]  (1242235441)
    Multimedia   
    Audio Adapter   SiS 7012 Audio Device
    Storage   
    IDE Controller   SiS PCI IDE Controller
    SCSI/RAID Controller   VOB InstantDrive Controller
    Disk Drive   ST380020A  (80 GB, 5400 RPM, Ultra-ATA/100)
    Disk Drive   Maxtor 6B160P0  (160 GB, 7200 RPM, Ultra-ATA/133)
    Disk Drive   HP PSC 2355 USB Device
    Optical Drive   AOPEN CD-RW CRW5224  (52x/24x/52x CD-RW)
    Optical Drive   DVDRW IDE 16X
    Optical Drive   VOBID InstantDrive CD SCSI CdRom Device
    SMART Hard Disks Status   OK
    Partitions   
    C: (NTFS)   40962 MB (30883 MB free)
    D: (NTFS)   33973 MB (29625 MB free)
    E: (FAT32)   1377 MB (126 MB free)
    I: (NTFS)   156327 MB (143043 MB free)
    Total Size   227.2 GB (198.9 GB free)
    Input   
    Keyboard   Easy Internet Keyboard
    Mouse   PS/2 Compatible Mouse
    Network   
    Network Adapter   Realtek RTL8139/810x Family Fast Ethernet NIC  (82.0.176.167)
    Modem   Creatix V.9X DSP Data Fax Modem
    Peripherals   
    Printer   HP PSC 2350 series
    USB1 Controller   SiS 7001 PCI-USB Open Host Controller
    USB1 Controller   SiS 7001 PCI-USB Open Host Controller
    USB Device   HP PSC 2350
    USB Device   PSC 2350 series (DOT4USB)
    USB Device   USB Composite Device
    USB Device   USB Mass Storage Device
    USB Device   USB Printing Support

    **I coudnt understand what you said about putting another proccessor and grafhics on the monitor?Is the sound ok when you put another processor?**
    I tried a friend's processor on my own machine, when I started up it seems that all I got was the fan running. No sound and nothing showing on her monitor. Now that I think about it, I should have tried my processor on her computer.
    At the end of the day my only option is to get a sound card and set it up. At least going this way I will still have the problem in the background and will still try to get to the bottom of it. If I don't get a card I would probably get rid of the computer as buying a new pc would be just as cheap as buying a motherboard & processor.
    Thank you for your time & directions on installing the card.
    If I get it sorted I will let you know

  • Sound Distortion problems w/ lower frequency tones/instuments

    I've been ending up with a lot of distortion in tracks when I bounce them over to Itunes. Primarily w/ lower frequency notes on bass and various pads - it's frustrating to have to adjust all the levels to lose the distortion. I obviously don't want to have to avoid using lower tones in tracks.
    Am I stuck just filtering and adjusting eq's or is their an easier option?
    Thanks in advance all.

    What the best way is to avoid distortion w/ lower frequencies?
    The likely source of your distortion is too hot of an output level. You might try using compression or limiting to keep those low-frequency levels under control. Other than that, you just have to adjust individual track levels so that you get a good overall level without distortion. EQ can also help if a certain frequency range is too hot compared to everything else.

  • Output sound distortion when USB Mic Connected

    Hi everyone,
    Really appreciate anyone’s help on this sound distortion problem.
    I have been using the new 2014 iMac 27' for last 8 Months, bought Brand New, and recently updated to Yosemite. Everything worked fine including recording, until this update.
    I'm using Blue Yeti USB Mic for recording, and few days after the update I was trying to record in GarageBand and the output sound (via headphone connected to USB MIc) started to distort and then suddenly dropped the bitrate/ sound and I could only hear some clicks. I reinstalled the GargeBand, still its the same distortion happens. The sound gets back to normal, only for few seconds, after I unplug the USB cable from the Mic device. And I tried changing the bit rate and again sounds starts to drop after few sec. This happens only when I connect the Blue Yeti USB Mic and sound output from the Mic itself. Same thing happens with iTunes as well. Output sound from Internal mic and speakers are working fine as normal.
    I tried connecting the USB Mic to my Windows laptop and its working fine with the Cubase 5 without any problem. So the problem is with the output sound, when external Mic connected.
    I don’t know the solution for this. Have checked on every single blog/ thread, sill couldn’t find the answer I’m looking for, to fix this.
    It would be great if you have any kind of a solution for the same.
    Info : FYI
    Mac
    OS X Yosemite: Version 10.10.2
    iMac (27-inch, Late 2013)
    Processor : 3.2 GHz Intel Core i5
    Hard-drive : 1 TB SATA Disk
    Ram: 8 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GT 755M 1024 MB
    Built-in Output:
      Default System Output Device:       Yes
      Manufacturer:                                  Apple Inc.
      Output Channels:                             2
      Current SampleRate:                      48000
      Transport:                                        Built-in
    Yeti Stereo Microphone:
      Default Input Device:                      Yes
      Default Output Device:                    Yes
      Input Channels:                               2
      Manufacturer:                                 Blue Microphones
      Output Channels:                            2
      Current SampleRate:                      48000
      Transport:                                      

    Nope. The larger buffer didn't work. What did work was running a cord out of the 1/4-inch jack from the direct box to a 1/4-to-1/8-inch adapter and then into the mic/line-in jack on my computer. I set GarageBand to use the built-in line-in and had no static problems. It's a stopgap until this gets fixed.
    A post by LinuxMercedes on Oct. 3 at http://discussions.apple.com/message.jspa?messageID=8158914 may provide a solution.

  • Having sound distortions in games with M-Audio Revolution 7.1

    I'm having sound distortion problems with a couple of games. I think this started a few OS X updates ago, but not sure which one. Two known games are Quake 3 and Quake 4. When I run either of them, the sound is deep and distorted.
    I'm sure an update of OS X broke m-audio's revolution driver. I currently have driver version 1.4.1. I only have distortions when sending sound output to my sound card. Sound sent to internal speaker comes out fine. I also tried with a freshly created user and freshly reinstalled driver & prefs. Same problem.
    I've tried M-Audio's site with no luck for solutions. It's been a year or so since they have updated it.
    Is anyone else having similar experiences with their M-Audio Revolutions?
    PM 1.25DP G4 (MDD)   Mac OS X (10.4.7)   Revolution 7.1

    Information taken from M-audio's site about Mac Reqs:
    All Platforms
    • available PCI card slot
    • CD-ROM drive
    Apple Macintosh®
    Minimum Required (for stereo operation)
    • Apple Macintosh® G4*
    • Mac OS 9.2.2 or later; Mac OS X version 10.2.6 or later
    • 256MB RAM
    Minimum Required (for multi-channel operation)
    • Apple Macintosh® G4* 733MHz QS
    • Mac OS 9.2.2 or later; Mac OS X version 10.2.6 or later
    • 256MB RAM
    Recommended
    • Apple Macintosh® G4* 800MHz QS or better
    • DVD-ROM drive
    • Mac OS X version 10.3 or later (Apple DVD Player required or AC-3 or DTS)
    • 512MB RAM
    *CPU Accelerator cards are not supported
    I dont think the Card will fully work with your Machine, because of your BWG3's specs.
    Reading the basic info, for Multi-Channel Operation aka Surround Sound you comptuer is not at Spec as it states it requires 733MHz G4 QS min, 800MHz G4 QS recommended.
    Message was edited by: lz3broc
    Message was edited by: lz3broc

  • HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

    Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

    It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
    Note that this can't happen if your iPhone is not connected to a WiFi network:
    When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
    iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
    Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
    PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
    from here: http://support.apple.com/kb/ht4106

  • Need help with audio sound distortion

    Hi,
    I have a HP G60 Notebook PC with Windows 7 which I bought two years ago; recently I noticed when audio is being played, the sound distorts through my integrated speakers (no external speakers) in the laptop. I was wondering if this is a hardware issue or a software one and where would I be able to get it  fixed?

    having problems with sound distortion,very slow sound as well as the image being slowed down as well. What can be done about this without having to get computer repaired?

  • HT4623 My I pad has sound distortion any ideas what is the problem?

    My iPad has sound distortion what can be the problem and solution. I have the latest version of the Software.

    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180http://support.apple.com/kb/ts5180
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • HELP! Why is the music sounding distorted

    Hi there, so i put on all music on the ipod, and two days later it is sounding all distorted and garbled, do i have to take it all off and start again? This ipod nano sure has its imperfections...thanx

    The equalizer might be on.
    On the nano, even if the equalizer is set to off in the iPod settings, the equalizer setting in iTunes is used. If you have a track in iTunes with a custom EQ set to, say, "rock" the iPod will use rock. It may sound fine though the computer speakers but not so good though the earbuds.
    Not all iPods are consistent about how they use the per track EQ settings from iTunes. On a 5G iPod, for example, setting the EQ on the iPod to off means it plays everything flat.
    You could try setting the EQ on the iPod nano to "flat" while the song in question is playing. If that clears it up you should set that song to use a flat EQ in iTunes. Then it will always play like that on the nano.
    Most modern music doesn't need equalization and adding it usually makes music sound distorted and garbled.

  • My Music sounds distorted can someone help?

    My music sounds distorted when I update my ipod, is there something I can do to fix it?

    I feel stupid, I fixed it, i just re-updated my ipod. I don't know what was wrong, but re updating fixed it.
    Thanks,
    Kimi

  • Sound Distortion playing DVDs with Audigy2 Va

    Last time I have problems playing DVD movies on my computer: The sound is distorted
    by scratches like an old vinyl. I am using a SB Audigy 2 on Win XP. I have tried several software DVD players, reinstalled the old drivers from CD and cleanly installed teh newest drivers via internet auto update. I also tried to update my VIA chipset drivers, deactivated several background programs etc.
    I found out that disabling the sound acceleration in DXDiag removes the sound distortion but then the sound (speech, effects) within a movie are extremly quiet compared to the music.
    Another thing: First I deinstalled completely the software and drivers from my audigy to replace it with new ones. Then I had to notice that the new Audio Control Center does not support the option to send bass-frequencies to my subwoofer. I could set the speakers to 5. but had no chance to get my subwoofer working. At the moment I have status quo by using new drivers, but my old creative applications for configurating my speakers.

    Ijust checked the preferences, go to Disc Setup and on the bottom in the Audio section, check off the box that says "Disable Dolby dynamic range compression" see if that helps.

  • Wav file distortion problem

    When putting radio programs together, I'm adding .wav files to .mp3 files in the multitrack view in Audition 3.0 and they sound fine to start with.  When I export the file to mp3 and listen to it in the edit view the .wav spots that I added sound distorted, as if there are 2 or 3 spots playing on top of each other.  I go back to Multitrack view and they also now sound distorted.  The other thing that happens is that sometimes once I export something of say 10mins, it only saves the first 20 seconds or so!  It doesn't happen every time but it is quite often.  If I go to another computer it seems to work fine and nobody else I know seems to get this problem which makes me think it must be my laptop.  Any idea what is causing these issues?  Maybe my Audio hardware or sample rate?  Please help!  Thanks.

    jonnykibbs wrote:
    To be honest I'm not sure what the levels are,
    Surely you can see on Audition's meters what the signal is peaking at? If levels are peaking very near to '0' then when you encode to  a lossy format like .mp3 you can generate levels above '0' and which lead to clipping and distortion.

  • Sound distortion - Pavilion DV6-3040sa

    Hi, 
    When i was at university, i had to connect my laptop via ethernet to gain internet access as there was no wi-fi connection in student halls. The sound distortion was quite bad. I couldn't even listen to music or watch video's as the sound would go distorted. It got worse if i tried streaming videos off the internet such as youtube. When i returned home, i connected to the internet via wi-fi and i didn't seem to experience any sound distortion. The sound was fine except for the odd occasional distortion but it wasn't a big problem. I assume it is something to do with the network cards? If someone could help me fix this problem, it would be much appreciated. I'd like to enjoy my music and videos without any distortion again
    Thanks,
    Kin.

    Uninstall both audio and network drivers through Control Panel > Programs and Features, reboot the computer and install updated one from here
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

Maybe you are looking for

  • How do i change the name of my macbook

    For a while now ive been using used mabook ( os x 10.6.8) and it always refers the computer as "kyles macbook". (kyle of course being the old owner) and ive searched all over settings and i have no clue how to change it. does anyone else know?

  • Pixel Aspect CS4 is no compatible with other systems/softwares

    If you make a video with a circle twisting around itself in CS4 in a comp like dvpal (PAR 1,09) and export to other system like smoke, flame, avid, final cut, When import, the video is ok, but if you want twist de video around itself (IN SOME OF THIS

  • Can't enter password for 5 million minutes (malfunction)

    I have an ipod touch I have had for over 2 years. One day it just pops up that I have to wait over 4 million minutes before I can even enter my password to open it. I realize that it is a security thing, but it is a malfunction in my ipod. Since Appl

  • Creating intermedia index - ora-03113

    I've been working with Oracle support for over a month now trying resolve this. Has anyone run into this error? i9AS 1.2.1 Portal 3.0.8

  • Copy/Paste layers

    Essentialy what I want to do is select a precomp, run the script and copy all the contents of the precomp back into the parent layer. An un-precomp I suppose. I was thinking there was something built in to do this but I have not yet found it. Is it p