Sound does not come out of iPod but can hear it with ear phones.  What happened

CCannot get sound from iPod except from earphones.  What has happened?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

Similar Messages

  • Having a MBPr late 2013 and having a sound problem the sound does not come tom the headphones even its all the way up and when i remove the headphones it docent come out the internal speaker either ? any idea how i fix this?

    the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?

    Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
    - I tested the headphones and speakers on other devices: they work fine.
    - When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
    I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
    What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
    Many thanks indeed!
    NG

  • I have a disk in my mac and came not get it out?  I use the command E key to eject but it does note come out?

    I have a disk in my mac but it does note come out useing command e to eject? how do i get it out or do I have to get it jixed?

    Force eject a stuck cd/dvd
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • External hard drive does not come out in desktop

    greetings! whenever i plug in an external hard drive or a USB flash disk through usb, it does not come out in the desk top. before, it used to come out, now it doesn't. i am still using the exact macbook. i think i touched something in the settings. please help

    Go to finder and choose preferences under finder in the menu bar. Now check and see if under General you have the choices clicked of what you want to show on the desk top.

  • Dbca does not come out after 100%

    I have installed and configuredthe Oracle 9i Rel2 on RH Linux 9.
    When I followed dbca steps to create a database, it does not come out after reaching 100%. I had to kill the process to end it. What could be reason? Because of this the init<SID> file is also not created.
    Please explain
    Mehul Trivedi

    I have installed Oracle9i on RH9 and I was able to use
    the dbca and really If your swap values in the OS are fine
    I do know whatelse you can check.
    If you want to create a database and the dbca is not
    functioning you have another option ( Create it manually )
    Chapter 2
    Administrator's Guide Contents / Search / Index / PDF
    http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
    Joel P�rez

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

    Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
    Help me please! greetings thanks!

    Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
    If you have some different page, try the quick fix in Fred McD's reply.
    If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
    For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
    (3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
    * ''Page thumbnails (default)'' => about:newtab
    * ''Blank tab'' => about:blank
    * ''Built-in Firefox home page'' => about:home
    * ''Any other page'' => full URL to the page
    Press Ctrl+t to open a new tab and verify that it worked. Fixed?
    Some gotchas:
    ''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
    ''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
    "3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
    ''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
    Any luck?

  • My win7 does not browse through my iphone3gs, it can only see pics on iphone. what can i do?

    my win7 does not browse through my iphone3gs, it can only see pics on iphone. what can i do?
    i want my bluetooth to work with non apple products.
    my safari does not download many webpages. give me suggestions for soln please

    Hi julianrpoma,
    I apologize, I'm a bit unclear what you mean when you say you cannot access it, and/or how a new iPhone was set up with an old account. If your Apple ID/iCloud account is now different, you may want to try changing the iCloud settings, as well as any other Apple ID settings, as outlined in the following article (apologies if that is what you are currently doing):
    iCloud
    iOS 6 and later: Go to Settings > iCloud.
    If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
    If you're still signed in with your previous Apple ID:
    Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
    Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.
    Apple ID: What to do after you change your Apple ID - Apple Support
    If you are still having issues, as this is a new iPhone you may want to try restoring it to factory settings and setting it up as new, including your correct updated account information:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Regards,
    - Brenden

  • Monitor does not come out of sleep Mac-Mini Mini-DVI to Dual  DVI-D cable

    I have an August 2009 Mac-Mini that I'm using with an Apple supplied Mini-DVI to DVI adapter along with a DVI-D Dual Link Cable connect to a Sceptre X7XV-Naga+ LCD monitor.
    The monitor is going into sleep mode on its own with no way to disable this feature on the monitor itself. I've disabled sleep mode on the Mac-Mini in the power setting in System Preferences.
    When in sleep mode and I move the mouse or press a key, the monitor will not come out of sleep mode. From other posts, I read that the issue might be that I wasn't using a Dual-Link DVI-D cable, so I bought one and installed such a cable. That has not resolved the problem. The monitor will not come out of sleep mode. When I have the monitor connected with a mini-display port to VGA adapter instead of a DVI-D cable, it will come out of sleep mode every time.
    Message was edited by: Annorax64

    I know it's a year later, but I'm not finding much through search.
    I have the same exact problem.  Difference being I'm using an iMac with 10.7.5.
    Same video board and monitor - ATI Radeon HD 6750M video card connected via DisplayPort to Samsing S24A850DW.
    I've tried two different mini-DisplayPort to DisplayPort cables and no change.
    I think I read that 10.8.3 might fix the issue.  Anyone that can confirm that, or has another solution?

  • Powermac CD does not come out

    Ever since i got this powermac, it constantly does not spit out cds when i eject. I tried Disk util, Open firmware, unix, finder, mouse at startup, and only mouse at startup works sometimes. Other times, it holds on to it continuosly.
    Please help!
    ( I don't know if this has already been answered or posted)
    it has been through a history of bad hard drive fixing itself, also.
    Powermac G5 Mac OS X (10.4.7) Weird history of Crash Repair
    Powermac G5   Mac OS X (10.4.7)   Weird history of Crash Repair

    There was a series of PowerMac's that got the wrong sized spacers for the superdrive and therefore the tray may not eject correctly due to height problems.
    Contact Apple and give them your serial number.
    If your handy you can switch out the superdrive yourself and Apple will just send you the replacement.

  • 3.3mhz iMac, just had Maverick installed and as I tried to upload Pix, the finder went into a wheel of death and since that point, have lost the ability to even type on ANY applicat would not come out of it.. did utilities and have no idea what to do next

    Have a iMac 3.3 mhz, tried to upload pix to an app and Finder went into the wheel of death and would not come out.. When it "Got Lost" I also lost the ability to even type on the machine in ANY APPLICATION. Have run utilities, made repairs and still no typing/text. On Thurs or Friday (10/24 or 10/25) Maverick was installed so this may be a problem that it created. As it happens I didn't ask for Maverick. How do I fix the "Finder" on the machine if i can't even type on it??

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

    Hello,
    I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
    I need a easier and manual way to eject the DVD. Where is apple's help?
    Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
    Thanks

    Thanks for asking, actually I just found a trick on a website.
    It siad that restart MBP while holding eject button, I did it and DVD came out right away.
    I hope that this works out for everyone.
    But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
    Thanks anyway dear.

  • Phone makes "morse code" sound when in use, not all the time but quite frequently. The sound does not come from the speakers, infact it comes from the comments inside the phone.

    When in use my phone makes a quiet buzzing noise coming not from the speakers but the actual phone. It does not do it all the time but it is quite frequent, my phone is an iPhone 5. Please can you tell me what the problem  is?

    Make an appointment at the Genius Bar to have it evaluated by the techs there. This is not normal and is probably not something that a user can fix.

  • Audio does not come out of my left speak

    Hello,
    I just installed a fresh installation of Vista two days ago.
    When I installed it, I had a Sound Blaster Li've! 5. card in my machine, and the card did not work until I installed KM audio drivers (which made only the 2 rear speakers work).
    Today I went out and bought the X-Fi Xtreme Audio card.
    The installation appeared to work, and I installed the Vista drivers from www.soundblaster.com.
    When I go to audio management, and test the speakers, audio comes out of all 5.
    BUT - when Windows Media Player, MediaSource 5, and any other system sound plays... my front left and rear left speakers do not play a thing.
    I know they are working, because when I tried the surround audio from http://www.microsoft.com/windows/windowsmedia/democenter/9series/avquality/wmapromp3/default.htm
    they all played, but when I played stereo... it only came out of front right and rear left.
    ALSO - I can't seem to find the Entertainment Mode, and some other features advertised on the box and guide that came with the CD.
    Does anybody know what I can do to fix these issues? Help would be greatly appreciated.
    Thanks,
    Anthony Coy

    Hello, Alexander meerkat. 
    Thank you for visiting Apple Support Communities.
    I would start with resetting the System Management Controller.  Here is the article on how to process these steps.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Cheers,
    Jason H.

  • TS2634 sound does not come from accessories connected to headphone jack ipad mini

    When connecting headphnones to my ipad mini no sound comes out. Is this a fault or do i need to change a stetting?

    They are plug in all the way but no sound through

Maybe you are looking for