Sound does not match image - ????

I am now having the same problem with my mac mini that I was having with my G4 powerbook.
When in imovie I choose share and then videocamera and send the movie to a video camera, sometimes the voice of the person speaking does not match the lips.
Usually if I do a restart, and make the same movements then it will work okay.
The camera is a JVC.
Any ideas???

Robert,
Try these fixes in iMovie before going to iDVD,
b even if the problem only occurs after burning
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
John

Similar Messages

  • When a video is taken in Photo Booth, the sound does not match up

    When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?

    Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
    Mylenium

  • Sound does not match video

    I have imported an HD video from a Canon HV30 camcorder into iMovie HD 6.0.3. The picture looks great but the sound does not match the video. I have never encountered this problem before when importing from other video camcorders (non HD). Does anyone have any idea how to solve this problem? Thanks.

    Hello, skidude23,
    Welcome to the discussions.
    Was the sound recorded in 12 bit instead of 16 bit?
    You can fix this by extracting the audio from the video clips. Put your movie clips in the timeline, and put it in the 'timeline' vies.
    Select the clip first, then go Advanced->extract audio. It may take a while, but you will then have the video clip on the video track, muted, with a separate audio track below it. You can then select 'show audio wave form' to see the audio waves and move the audio track slightly to get it synched with the video for that clip. When it is correct, do a 'Lock audio at playhead' to secure it.
    Do this for each of your clips. If your clips are quite long, this extraction can take a very long time. That is why I said to do it one clip at a time, but that does get tedious.

  • When watching a movie in Itunes the sound does not match the lips

    when watching a movie in Itunes the sound does not match the lips, is this normal? & If I purchase a movie will it play like a normal dvd?

    Try the suggestions in this thread.

  • In AE CS6, the sound does not match with video

    Hi,
    I would like to ask a question. I have AE CS6, and I recorded a gameplay video with Avermedia Live Gamer HD. The format of this video is .mp4. When I import the .mp4 into the program, the sound does not match. On the original video, when i play with VLC or WMP, all things are good, and when i import, the sound does not good. What causes this problem, and can I do something to solve this?
    Thanks the answers, R3dLinE

    Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
    Mylenium

  • Some sound does not match up in iDVD during transitions

    I have created iMovie 09 (8.0.4) that has transitions (fades, wipes etc) and then send it to iDVD and at different times the sound cuts out several seconds before the transition then then the new sound starts at the wrong place. But it does not happen at every transition, but enough to make it very noticeable; in my case a wedding procession of each bridesmaid walking, the sound cuts out (should fade) about 2 seconds then the Cross Dissolve happens, but not on every girl, but most of them.
    I have other movies and DVDs that do not have this issue.
    Any ideas?

    You are correct, re: the "best" way to hanlde OOS. The ultimate method with VHS tapes, is to use an A-D bridge, that Captures both the Audio & Video in sync. However, this usually means an investment is a product like the Canopus/Grass Valley 110, or their 300*. These are FireWire devices, but will get your tapes Captured (through the Edius software) onto your computer in DV-AVI Type II format w/ 48KHz 16-bit PCM/WAV Audio.
    Next to that, the manual method works well. Usually, the OOS will not be dynamic, i.e. it will not drift over time, but always check to be sure. Also, it will most often be constant Capture to Capture, i.e. you can usually find the offset and can at least use that as the starting point for all other Captures from that card.
    Good luck,
    Hunt
    * Note that there are other good products available. These are just two that I like. Also, few users have ever gotten any Dazzle product to work well, if at all. If you get one of those, you could be the lucky user to actually get it to work.

  • ITunes 7.3.2: ArtWork does not match Images on Cover Flow View and iPod

    Hello everyone, this is my first post, thanks in advance for any and all help.
    I have loaded most of my music collection onto iTunes, and authorized it to get album artwork. It has only found about 60% of my cover art (I have a lot of international discs, etc.), and of what it does find maybe 60% is correct. So I have spent a lot of time adding artwork by either scanning in cover art or cutting and pasting from the web. I go to "Get Info" and check the artwork tab all the time to make sure that only artwork that is correct or that I have added is attached to each of my song files.
    However, I have noticed that there is a significant amount of my song files that, when I use cover flow view, or when I play the songs on my video iPod, the artwork that is on the artwork pane and what appears on the cover flow view don't match. Or the artwork that is in the artwork pane (and the only artwork in the get info artwork section) and what shows up on my iPod, don't match up. It is, for an OCD completist like me, rather annoying.
    As an example, I have a lot of compilation albums. I have probably 13 different albums by different artists but which all have the same name of "The Ultimate Collection". There are some tracks for each album where the artwork pane and the cover flow view artwork match, but not all of the tracks.
    I selected "group compilations when browsing", but that doesn't help. I selected all the tracks from the same album and clicked yes to whether it is a compilation, and that didn't work.
    Does anyone have a simple, QUICK solution for making the artwork I have put in the artwork pane override or force itself on the cover flow view? Horrible phrasing I know, but thank you in advance for your help!

    I had the same problem when I updated to 7.3, but I was able to fix it.
    As far as I can tell, itunes 7.3 sees all music files (in your user/itunes/music folder) with the extension .mpg as quicktime movies, not mp3's and itunes won't let you add a cover to them. The problem is that songs imported as mp3's by previous versions of iTunes were all given the extension .mpg and not .mp3 (at least on my machine). I was able to fix the problem by simply changing the .mpg to .mp3 for all of my songs. As soon as I did this, the album artwork showed up again.
    You have a few options for how you change the extension. You can right click on every file in your itunes library and select "Show In Finder" to change the file extension, or if you have many songs to fix (I had 793) you can download 'A Better Finder Rename' (search for it at www.versiontracker.com, it costs $20 to change more than 10 files at a time) which will make the changes automatically. If you are cheap you can always set up an automator work-flow to get the job done.
    Hope this helps

  • Preview and print does not match image in LR

    I tweaked an image in Develop and printed some 5x7s until I got it right and then went to 13x19 (first time ever using that size with my R3000). The print preview and the print  were way too red. I went back to a 5x7 and it was way red as well in print preview, so I didn't print. I replaced a light magenta cart that I think ran out during the 13x19 print, and then some others that were low, and did a nozzle check and that was okay. I have spent hours looking around all of the settings (sRGB) and can find nothing that would explain what changed between my last good 5x7 print and the red 13x19. I went back to earlier versions and had the same problem. Monitor is due for recalibration, but that probably has nothing to do with it since it changed so suddenly. Any ideas of what to do?  R3000, LR 4.3, Win 7, NEC PA 271w, beginner level

    A print that is too red / magenta is an indication for double color management, i.e. by Lr and by the printer.
    Color management must be done only by one: either by the application (Lr or Photoshop) or by the printer but never by both.
    When you select a printing profile in Lr that means that now Lr is doing the color management. Consequently you have to switch off colo rmanagement in the printer dialog (printer driver).
    See screen shot:
    Or, you can do it the other way round: Let the printer do the color management and select <Managed by Printer> in Lr.

  • Sound does not match video - H264, animation etc?

    Hello,
    I am having a little trouble with Quicktime. I am exporting a music video (from After Effects CS3) with H264 compression (at a variety of settings, I also have an archival copy with animation compression) and the exported video, when played back, plays faster than the sound, or the sound plays slower than the video.
    The sound source file is 32 bit, 41,000 kHz, and I set the output for the .mov to be 16-bit, and 41,000 kHz.
    I have tried a lot of different settings. I have a very powerful workstation, so I don't think that is the problem.
    The most telling thing seems to me to be that when I play the exported .mov in After Effects, the sound plays back at the right speed.
    I want to show the H264 version on the internet, and because it is a music video the sound sync is vital.
    Can anyone help me here?
    Thanks very much,
    Simon

    Sorry I had that the wrong way round - the video plays back slower than the sound - or the sound plays back faster than the video.

  • ERROR ITMS-9000: "File given does not match type JPEG ... Image is likely corrupt

    Hi ALl,
    On compliing my book  get these errors with ITunes producer...I've resaved the files out with photoshop and they seems fine?
    Package Summary:
    1 package(s) were not uploaded because they had problems:
              /Users/Umran/Music/iTunes Producer/Playlists/9780957408654.itmsp - Error Messages:
                        Apple's web service operation was not successful
                        Unable to authenticate the package: 9780957408654.itmsp
                        ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1cf629f[userString=An unknown error occured while parsing. Image is likely corrupt.  Exception message: null]" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1801285[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1e056e9[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@11d58e0[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                        ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@127c00e[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                        ERROR ITMS-5107: "VirtualLandscapesTheModernEra20002012.epub: Fixed-layout books must supply a text or bodymatter starting location in the guide." at Book (MZItmspBookPackage)
    Any advice??? Hope someone can help!

    iBookstore Publisher Support send me a fast response email which included some helpful info:
    Please make sure that all image files inside the ePub end with one of the following: ".tif", ".jpg", or ".png" and that the file itself matches the file extension type. To check if the image file matches the file extension type, please right click on the image then select "Get Info". Once the info tab appears, please make sure that the file extension type of the image file matches the "Kind" found under "General".
    For further information regarding embedded images, please refer to the iBookstore Asset Guide, which is available for download in the Deliver Your Content module in iTunes Connect.
    And they INCLUDED THE TRANSPORTER LOG (!), the log generated by iTunes Producer as it tries to upload a book. We were able to search for the Validation Error # within the log and find out which image Producer was trying to upload when it encountered an error. Turns out the problem was a corrupted screenshot jpeg.
    Grateful!

  • Print Res Unchecked, Image does not match native resoltuion

    Many of my images already have their resolution and height/width dimensions set in PS. My understanding is that when the print resolution checkbox is unchecked in LR, then the image should be at its native resolution and size and will print the same size as when printed from PS.
    However, I find that when I uncheck the resolution checkbox, the image size as shown in LR Print module does not match the native resolution and size. For example a psd file in PS CS3 shows an image size of 16 x 10.25 @ 200 ppi. In LR the same image shows a print size of 15.3 x 9.81 @ 209 ppi. I have checked both tif and psd files, and similar discrepancies exist.
    I wonder if I am doing something wrong or misunderstanding something? Thanks for your help

    That was Page Setup, sorry (which actually opens a Print Setup dialogue, at least on a PC). There you can choose printer and paper size. Then in Layout panel you choose how to arrange the picture(s) within the page, and the combination of the two will determine the print size, right?
    Anyway, I believe I understand your concern now, which is about printing at 100% of the size indicated by the TIFF or PSD file, as PS can do. I did not find a way to direct LR to do the same.
    The Print Resolution, when unchecked, doesn't behave like you expect. If you check it, LR will re-sample the image to print it at the resolution you indicated there, whatever the output size. If you un-check it, LR will not re-sample the image; still it will re-size it based on your Page Setup and Layour settings, and the printer driver/printer will do the needed re-sampling. At least this is my understanding.

  • Windows 8 error "product key does not match any of the Windows images available for installation"

    Hi Experts
    My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
    I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
    Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key" 
    Please help me. To whom I have to contact?

    Hi ghost-rider,
    Thank you for your query, I will do my best to assist you.
    I understand you tried to do a recovery and you received this error  "oxefffff08".
    First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
    If no hardware failures are located, you have ruled that possibility out.
    Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
    If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region  Technical Support Sitemap
    The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
    I hope this has helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • The product key entered does not match any of the Windows images available for installation. Enter a different product key.

    how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

    That's a really helpful answer and not smug at all, thanks Carey.
    I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
    Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
    a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
    Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
    edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

  • [Solved] (WW) fglrx(0): Kernel Module version does *not* match driver.

    fglrx has just recently stopped working, and I can't quite pinpoint when that was because I honestly hadn't noticed until checking.  I've tried a few reinstalls and different xorg options so far, but had no luck.
    glxinfo:
    name of display: :0.0
    display: :0 screen: 0
    direct rendering: No
    server glx vendor string: SGI
    server glx version string: 1.2
    server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
    client glx vendor string: ATI
    client glx version string: 1.3
    client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
    GLX_ATI_pixel_format_float, GLX_ATI_render_texture
    GLX version: 1.2
    GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
    OpenGL vendor string: Mesa project: www.mesa3d.org
    OpenGL renderer string: Mesa GLX Indirect
    OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
    OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias
    visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
    0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
    0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
    0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
    0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
    0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
    0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
    0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
    0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
    Xorg.0.log:
    X Window System Version 7.2.0
    Release Date: 22 January 2007
    X Protocol Version 11, Revision 0, Release 7.2
    Build Operating System: UNKNOWN
    Current Operating System: Linux yggdrasil 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
    Build Date: 08 April 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 11 10:14:15 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "XkbRules" "xorg"
    (**) XKB: rules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) XKB: model: "pc105"
    (**) Option "XkbLayout" "gb"
    (**) XKB: layout: "gb"
    (==) Keyboard: CustomKeycode disabled
    (**) |-->Input Device "mx518"
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/cyrillic,
    /usr/share/fonts/Type1,
    /usr/share/fonts/TTF
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AIGLX" "off"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81c44a0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.1
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1106,0269 card 1043,8122 rev 80 class 06,00,00 hdr 80
    (II) PCI: 00:00:1: chip 1106,1269 card 1043,8122 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:00:2: chip 1106,2269 card 1043,8122 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:00:3: chip 1106,3269 card 1043,8122 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:00:4: chip 1106,4269 card 1043,8122 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:00:7: chip 1106,7269 card 1043,8122 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:0a:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
    (II) PCI: 00:0a:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
    (II) PCI: 00:0a:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
    (II) PCI: 00:0e:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
    (II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
    (II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
    (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
    (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
    (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
    (II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
    (II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
    (II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
    (II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
    (II) PCI: 01:00:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
    (II) PCI: 01:00:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xfd900000 - 0xfdefffff (0x600000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0x9ff00000 - 0xbfefffff (0x20000000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xb0000000/27, 0xfde00000/16, I/O @ 0xd000/8, BIOS @ 0xfdd00000/17
    (--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xa8000000/27, 0xfdc00000/16
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
    [1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
    [2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
    [3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
    [4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
    [6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
    [7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
    [8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
    [9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
    [10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    [11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
    [16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
    [19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
    [20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
    [21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
    [22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
    [23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
    [25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
    [26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
    [1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
    [2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
    [3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
    [4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
    [6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
    [7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
    [8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
    [9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
    [10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    [11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
    [16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
    [19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
    [20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
    [21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
    [22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
    [23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
    [25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
    [26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
    [5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
    [6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
    [7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
    [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
    [10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
    [11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
    [12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
    [13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    [17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
    [22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
    [25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
    [26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
    [27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
    [28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
    [29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
    [31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
    [32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
    (II) LoadModule: "ddc"
    (II) Loading /usr/lib/xorg/modules//libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (**) AIGLX disabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.2.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.38.6
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "fglrx"
    (II) Reloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) LoadModule: "keyboard"
    (II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
    (II) Module keyboard: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
    (II) Primary Device is: PCI 01:00:0
    (II) ATI Proprietary Linux Driver Version Identifier:8.38.6
    (II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
    (II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
    (II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
    (--) Assigning device section with no busID to primary device
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (--) Chipset Supported AMD Graphics Processor (0x4E48) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
    [5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
    [6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
    [7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
    [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
    [10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
    [11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
    [12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
    [13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    [17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
    [22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
    [25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
    [26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
    [27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
    [28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
    [29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
    [31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
    [32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
    (II) fglrx(0): pEnt->device->identifier=0x81e4088
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
    [5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
    [6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
    [7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
    [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
    [10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
    [11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
    [12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
    [13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
    [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    [20] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
    [25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [27] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
    [28] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
    [29] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
    [30] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
    [31] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
    [32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [33] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
    [34] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
    [35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
    [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin, [x]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.1
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "DPMS" "true"
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
    (WW) fglrx(0): Bad V_BIOS checksum
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (--) fglrx(0): Chipset: "RADEON 9800 PRO" (Chipset = 0x4e48)
    (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
    (--) fglrx(0): board vendor info: original ATI graphics adapter
    (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
    (--) fglrx(0): MMIO registers at 0xfde00000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.1
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 2.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI R360
    (II) fglrx(0): VESA VBE OEM Software Rev: 1.0
    (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: R360
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmGetBusid returned ''
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.38.6
    ABI class: X.Org Server Extension, version 0.3
    (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
    (II) fglrx(0): AGP card detected
    (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Reloading /usr/lib/xorg/modules//libddc.so
    (II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: AIC Model: 9450 Serial#: 329
    (II) fglrx(0): Year: 2006 Week: 33
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    (II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591
    (II) fglrx(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@67Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 832x624@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): 1280x1024@75Hz
    (II) fglrx(0): 1152x870@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
    (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
    (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
    (II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
    (II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
    (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
    (II) fglrx(0): Monitor name: F-419
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff000523509449010000
    (II) fglrx(0): 2110010380251e78e8e595a5584c9726
    (II) fglrx(0): 1e5054bfef808180818a818c01010101
    (II) fglrx(0): 010101010101bc34009851002a403070
    (II) fglrx(0): 1300782d1100001ed60980a0205e6310
    (II) fglrx(0): 10605208782d1100001a000000fd0032
    (II) fglrx(0): 4b1e500e000a202020202020000000fc
    (II) fglrx(0): 00462d3431390a2020202020202000ba
    (II) fglrx(0): End of Display1 EDID data --------------------
    (WW) fglrx(0): Only one display is connnected,so single mode is enabled
    (II) fglrx(0): Primary Controller - DFP on internal TMDS
    (II) fglrx(0): Internal Desktop Setting: 0x00000001
    (II) fglrx(0): POWERplay not supported on this hardware
    (==) fglrx(0): Qbs disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 37 modes found for primary display.
    (--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
    (**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
    (**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
    (**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
    (**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
    (**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
    (**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
    (**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
    (**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
    (**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
    (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
    (**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
    (**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
    (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
    (**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
    (**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
    (**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
    (**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
    (**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
    (**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
    (**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
    (**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
    (**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
    (**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
    (**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
    (**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
    (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
    (**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
    (**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
    (**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
    (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
    (**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
    (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
    (**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
    (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
    (--) fglrx(0): Display dimensions: (370, 300) mm
    (--) fglrx(0): DPI set to (87, 86)
    (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
    (**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
    (**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
    (**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
    (**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
    (**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
    (**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
    (**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
    (**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
    (**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
    (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
    (**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
    (**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
    (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
    (**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
    (**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
    (**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
    (**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
    (**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
    (**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
    (**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
    (**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
    (**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
    (**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
    (**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
    (**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
    (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
    (**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
    (**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
    (**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
    (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
    (**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
    (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
    (**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
    (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules//libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.1
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.1
    (==) fglrx(0): HPV inactive
    (**) fglrx(0): FSAA enabled: NO
    (==) fglrx(0): FSAA Gamma enabled
    (==) fglrx(0): FSAA Multisample Position is fix
    (==) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) fglrx(0): Depth moves disabled by default
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x4000000f
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (==) fglrx(0): EnablePrivateBackZ = NO
    (II) LoadModule: "glesx.so" (glesx)
    (WW) LoadModule: given non-canonical module name "glesx.so"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 7.1.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension GLESX
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b]
    [1] 0 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
    [7] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
    [8] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
    [9] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
    [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [11] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
    [12] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
    [13] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
    [14] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
    [15] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
    [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    [23] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
    [28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [29] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [30] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
    [31] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
    [32] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
    [33] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
    [34] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
    [35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
    [36] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
    [37] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
    [38] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
    [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
    (II) fglrx(0): detected X.org 7.1.0.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenByBusid: drmOpenMinor returns 6
    drmOpenByBusid: drmGetBusid reports
    drmOpenDevice: node name is /dev/dri/card1
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card2
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card3
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card4
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card5
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card6
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card7
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card8
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card9
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card10
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card11
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card12
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card13
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card14
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmGetBusid returned ''
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0xb4000
    (II) fglrx(0): [drm] mapped SAREA 0xb4000 to 0xb7282000
    (II) fglrx(0): [drm] framebuffer handle = 0xb5000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.37.6
    (II) fglrx(0): Date: May 25 2007
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (WW) fglrx(0): Kernel Module version does *not* match driver.
    (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
    (II) fglrx(0): [drm] removed 1 reserved context for kernel
    (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xb4000 at 0xb7282000
    (WW) fglrx(0): ***********************************************
    (WW) fglrx(0): * DRI initialization failed! *
    (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
    (WW) fglrx(0): * 2D acceleraton available (MMIO) *
    (WW) fglrx(0): * no 3D acceleration available *
    (WW) fglrx(0): ********************************************* *
    (II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
    (==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
    (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1280 x 7167
    (==) fglrx(0): Backing store disabled
    (==) fglrx(0): Silken mouse enabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): GLESX enableFlags = 0
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) fglrx(0): Acceleration enabled
    (II) fglrx(0): Direct rendering disabled
    (==) fglrx(0): Using hardware cursor
    fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000404
    fbarea0->box.x2 0x00000500, fbarea0->box.y2 0x00000406
    icon[0].start=0x505000
    fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000406
    fbarea1->box.x2 0x00000500, fbarea1->box.y2 0x00000408
    icon[1].start=0x508000
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Loading local sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
    (II) Module GLcore: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) GLX: Initialized MESA-PROXY GL provider for screen 0
    [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
    (**) Option "CoreKeyboard"
    (**) Keyboard0: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "gb"
    (**) Keyboard0: XkbLayout: "gb"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (**) Option "Protocol" "ExplorerPS/2"
    (**) mx518: Device: "/dev/input/mice"
    (**) mx518: Protocol: "ExplorerPS/2"
    (**) Option "CorePointer"
    (**) mx518: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Buttons" "10"
    (==) mx518: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) mx518: ZAxisMapping: buttons 4 and 5
    (**) Option "ButtonMapping" "1 2 3 6 7"
    (**) mx518: Buttons: 14
    (**) Option "Resolution" "800"
    (**) mx518: Resolution: 800
    (II) XINPUT: Adding extended input device "mx518" (type: MOUSE)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) mx518: ps2EnableDataReporting: succeeded
    xorg.conf:
    Section "ServerLayout"
    Identifier "Xorg"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "mx518" "CorePointer"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AIGLX" "off" # Disable AIGLX
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    # Fonts
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/TTF"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "drm"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    Load "fglrx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    # Options
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "gb"
    # Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "mx518"
    Driver "mouse"
    # Options
    Option "CorePointer"
    Option "Resolution" "800"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "ExplorerPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "10"
    Option "ButtonMapping" "1 2 3 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "AG Neovo"
    ModelName "F-419"
    HorizSync 24.0 - 80.0
    VertRefresh 50.0 - 75.0
    # Options
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "Card0"
    VendorName "All"
    BoardName "All"
    Driver "fglrx"
    # Options
    # Option "XAANoOffscreenPixmaps" "true"
    # Option "AGPMode" "8"
    # Option "ColorTiling" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 1
    Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    #Section "Extensions"
    # Option "XEVIE" "Enable"
    # Option "Composite" "Enable"
    #Endsection
    Would it be possible to explain the other warnings in Xorg.0.log?  Rather curious about those apart from the obvious one, too.
    Thanks.
    Last edited by Newnux (2007-07-11 16:04:15)

    Indeed, that seems the end-all error of it all.
    I'll summarise my warnings, some for curious reasons:
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) # What's this?
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found # Not a problem.
    (WW) fglrx(0): Only one display is connnected,so single mode is enabled # No problem.
    (WW) fglrx(0): Kernel Module version does *not* match driver.
    (WW) fglrx(0): ***********************************************
    (WW) fglrx(0): * DRI initialization failed! *
    (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
    (WW) fglrx(0): * 2D acceleraton available (MMIO) *
    (WW) fglrx(0): * no 3D acceleration available *
    (WW) fglrx(0): ********************************************* *
    Anyway, I wondered about versions and noticed this:
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0xbc000
    (II) fglrx(0): [drm] mapped SAREA 0xbc000 to 0xb7285000
    (II) fglrx(0): [drm] framebuffer handle = 0xbd000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.37.6
    (II) fglrx(0): Date: May 25 2007
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (WW) fglrx(0): Kernel Module version does *not* match driver. # included to show where this was displayed
    All versions previous to that show 8.38.6:
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.38.6
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.0
    So I assume I have an old version dotted around somewhere, but I'm not sure about how it's all loaded and such.
    Now, quoting something I'd come across a few times and taking it from thinkwiki:
    If you lose hardware acceleration after a driver update this can be caused by an old fglrx kernel module being loaded.
    Check out /var/log/Xorg.0.log for a message like:
        (WW) fglrx(0): Kernel Module version does *not* match driver.
        (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
    You can verify this yourself by looking at the version message some lines above. It should read something not matching the installed version like:
        (II) fglrx(0): Kernel Module Version Information:
        (II) fglrx(0): Name: fglrx
        (II) fglrx(0): Version: 8.10.19
    The cause for this trouble might be that there resist multiple versions of the fglrx module within the kernel module search path.
    Go to /lib/modules/<your linux kernel version>/ and type # grep fglrx modules.dep.
    If grep finds multiple lines you nailed down the problem. All you have to do now is to delete any versions of the module (look at the filedate) but the most current one. Then run # depmod and you are done.
    Hint:
    Newer versions (8.21.7) of the fglrx module seem to be installed in the extra/ subdirectory.
    Older versions (8.19.10) used to be located in the kernel/drivers/char/drm/ subdirectory.
    How does this apply to Arch?  I only found one instance of fglrx by using that method.
    Edit: Forgot to add that I've tried reinstalling a few times, it doesn't really seem to do anything.  Wondering if I should attempt to install an older version or something, but I don't get why the driver numbers don't match for me.  Surely others have updated their drivers too.
    Last edited by Newnux (2007-07-11 13:28:55)

  • Shuffle play no longer works properly and the artwork does not match after iOS5 upgrade.

    When I use shuffle play, my ipod touch stops playing after one or two songs and the artwork does not match the song. 

    i have what sounds like the exact problem; thought it might be related to a) my recent replacement phone, or b) my recent upgrade to OS 5.0.1

Maybe you are looking for

  • Norton 360 does not pick up tracking cookies after updating to firefox 17.0

    With firefox 17.0 Norton 360 does not pick up tracking cookies that were picked up with firefox 16.0.2. Uninstalled 17.0 and and reinstalled 16.0.2 - tracking cookies are picked up - updated to 17.0 and again no tracking cookies. I did not see anythi

  • SWA: Web Services call with attachment using 10.1.3 preview?

    Has anyone managed to figure out how to invoke a web service with an attachment (using SWA, SOAP with Attachments) with the new 10.1.3 preview release? Or are there any samples/documents that can point me in the right direction on how to do this? Tha

  • Web Intelligence Rich Client Not Cancel Query

    Hi all When i do a query in Web Intelligence Rich Client and CANCEL that query appears 3 options, but whit any option nothing happend and the laptop is block and i have to use the commands CTRL + ALT + DEL and finish the process. What is the problem

  • Simple offset - syntax error

    I get a syntax error doing this. calmoyr1 = request->get_form_field( 'calmoyr' ). calyr = calmoyr1+0(4). calmo = calmoyr1+4(2) - 2. concatenate calyr calmo into calmoyr1. I tried to declare calmo and calyr as N but it still gives me error.

  • Displaying logged in user when printing a query generated report.

    Hi all I need to know how can i show the user code of the person who printed a certain report. Scenario: When a despatch clerk reconciles driver cash they print a query genereted report , so i need his user code to show on the report... please check