Sound does not match video

I have imported an HD video from a Canon HV30 camcorder into iMovie HD 6.0.3. The picture looks great but the sound does not match the video. I have never encountered this problem before when importing from other video camcorders (non HD). Does anyone have any idea how to solve this problem? Thanks.

Hello, skidude23,
Welcome to the discussions.
Was the sound recorded in 12 bit instead of 16 bit?
You can fix this by extracting the audio from the video clips. Put your movie clips in the timeline, and put it in the 'timeline' vies.
Select the clip first, then go Advanced->extract audio. It may take a while, but you will then have the video clip on the video track, muted, with a separate audio track below it. You can then select 'show audio wave form' to see the audio waves and move the audio track slightly to get it synched with the video for that clip. When it is correct, do a 'Lock audio at playhead' to secure it.
Do this for each of your clips. If your clips are quite long, this extraction can take a very long time. That is why I said to do it one clip at a time, but that does get tedious.

Similar Messages

Sound does not match video - H264, animation etc?

Hello,
I am having a little trouble with Quicktime. I am exporting a music video (from After Effects CS3) with H264 compression (at a variety of settings, I also have an archival copy with animation compression) and the exported video, when played back, plays faster than the sound, or the sound plays slower than the video.
The sound source file is 32 bit, 41,000 kHz, and I set the output for the .mov to be 16-bit, and 41,000 kHz.
I have tried a lot of different settings. I have a very powerful workstation, so I don't think that is the problem.
The most telling thing seems to me to be that when I play the exported .mov in After Effects, the sound plays back at the right speed.
I want to show the H264 version on the internet, and because it is a music video the sound sync is vital.
Can anyone help me here?
Thanks very much,
Simon

Sorry I had that the wrong way round - the video plays back slower than the sound - or the sound plays back faster than the video.

When a video is taken in Photo Booth, the sound does not match up

When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?

Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium

In AE CS6, the sound does not match with video

Hi,
I would like to ask a question. I have AE CS6, and I recorded a gameplay video with Avermedia Live Gamer HD. The format of this video is .mp4. When I import the .mp4 into the program, the sound does not match. On the original video, when i play with VLC or WMP, all things are good, and when i import, the sound does not good. What causes this problem, and can I do something to solve this?
Thanks the answers, R3dLinE

Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium

When watching a movie in Itunes the sound does not match the lips

when watching a movie in Itunes the sound does not match the lips, is this normal? & If I purchase a movie will it play like a normal dvd?

Try the suggestions in this thread.

Audio does not match video in rescue me season 1 that i purchased

audio does not match video in rescue me season 1 that i purchased

Hello shargraw,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Have a nice day,
Mario

Sound does not match image - ????

I am now having the same problem with my mac mini that I was having with my G4 powerbook.
When in imovie I choose share and then videocamera and send the movie to a video camera, sometimes the voice of the person speaking does not match the lips.
Usually if I do a restart, and make the same movements then it will work okay.
The camera is a JVC.
Any ideas???

Robert,
Try these fixes in iMovie before going to iDVD,
b even if the problem only occurs after burning
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
John

Some sound does not match up in iDVD during transitions

I have created iMovie 09 (8.0.4) that has transitions (fades, wipes etc) and then send it to iDVD and at different times the sound cuts out several seconds before the transition then then the new sound starts at the wrong place. But it does not happen at every transition, but enough to make it very noticeable; in my case a wedding procession of each bridesmaid walking, the sound cuts out (should fade) about 2 seconds then the Cross Dissolve happens, but not on every girl, but most of them.
I have other movies and DVDs that do not have this issue.
Any ideas?

You are correct, re: the "best" way to hanlde OOS. The ultimate method with VHS tapes, is to use an A-D bridge, that Captures both the Audio & Video in sync. However, this usually means an investment is a product like the Canopus/Grass Valley 110, or their 300*. These are FireWire devices, but will get your tapes Captured (through the Edius software) onto your computer in DV-AVI Type II format w/ 48KHz 16-bit PCM/WAV Audio.
Next to that, the manual method works well. Usually, the OOS will not be dynamic, i.e. it will not drift over time, but always check to be sure. Also, it will most often be constant Capture to Capture, i.e. you can usually find the offset and can at least use that as the starting point for all other Captures from that card.
Good luck,
Hunt
* Note that there are other good products available. These are just two that I like. Also, few users have ever gotten any Dazzle product to work well, if at all. If you get one of those, you could be the lucky user to actually get it to work.

A2107 audio does not match video

just purchaced tablet can't get video to match audio I tried youtube netflix, hulu. any solutions' thanks

Hello shargraw,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Have a nice day,
Mario

Movie does not match video , tried to make 2nd account still happens , running 10.5

help

iWeb version 1 has the default 'autoplay="false"' page code. iWeb version 2 has a QuickTime Inspector window that can change this tag to "true".
You can fumble through the Published javascript files made by version 1 and manually edit the false tag to true with any plain text editor.
Any QuickTime format allows a viewer to "double click" on the image to begin playback (single click stops it). Maybe you should add some text below your video giving these instructions?

After export audio does not match w/ video. ?

I exported my movie from FCE, and the audio is off. It does not match the video, i see lips move but not w/ the sound. Can an help? -Thanks!

Can you provide some specific info or steps you take?
Al

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sound does not match video

Similar Messages

Maybe you are looking for