Sound don't work in KDE

Hello,
I've installed arch linux with KDE in my laptop. I've installed meta packages "kde" and "phonon-xine".
The sound don't work in the desktop.
Mi hardware sound is:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
The headphones work fine, but the speakers don't work.
What can I do?.
Best regards.

Zom wrote:
http://lpix.org/images/public/f6ecd9adb … lata10.png
That's what I have on my options panel, but that might have been added in the KDE 4.6 beta.
What sound system are you using? (Alsa/OSSv4/Pulse?)
I don't known that sound system am I using, how can I see it. I'm using xine engine.
Anyway, the sound work fine now. The problem was that speaker element don't show in mixer. I've selected and work now.
I'm not in the audio group. Why work?.
Best regards.

Similar Messages

  • Some sounds don't work in Logic for me

    Hi.  I'm running Logic 9 on a 2010 13 inch MacBook Pro 2.4 ghz 4 GB OSX 10.6.7.  Logic works perfect for me except that every now and then a few select sounds do not work.  In fact, they do not load and cause my Logic to freeze and crash.  It is very frustrating because the sounds that do not work are dispersed randomly and I forget which one not to click and then my entire project is lost.  I can give you some of the sounds that I know off the top of my head that cause logic to crash: Orchestra>Choir>Chamber Ensemble, Gregorian Ensemble.  I noticed this folder around half don't work and then other folders 1 or 2 sounds don't work.  I would say that it's only about 1% of the entire library.
    I'm pretty sure it is not a memory problem because the files selected are no bigger than other files I select.  I thought that the files might have been corrupted somehow, so I actually reinstalled Logic 3 times, but I get the same problem.  I downloaded all the updates. I also checked my hard drive and there are no problems with it.  My only guess is that somehow the discs I bought did not get manufactured 100% correctly and some files did not get burned on properly.  I don't see how only a few select files wouldn't work, but I had bought some blu-rays before where it would freeze at a certain section and I exchanged it for a working copy.  Anyone have any leads or suggestions? 
    Thanks in advance,
    Richard

    Update 2:  I just went to the Genius Bar and they gave me a new copy of Logic.  I erased and installed my laptop once more just in case and installed Logic Pro.  I got the same problem.  Deductively, I beleive it's my laptop that is the source of the problem.  My laptop is working perfectly fine otherwise though.  Any ideas?

  • Mail's sounds don't work after the computer has awakened

    This has been reported before for previous versions of OS X but, alas, it seems that the problem prevails in 10.9 as well. If the computer goes to sleep and then awakenes, Mail's sounds don't work. You have to quit and restart Mail. Any ideas how this can be fixed?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    Also look at Settings>General>Sounds and make sure that all sounds have been turned on. And Settings>Notifications - check the settings in there for FaceTime and iMessage.

  • I dropped my iPhone5 in the snow, now the sound don't work anymore

    I dropped my iPhone5 in the snow, now the sound don't work anymore

    At this point it's clear that it's been damaged and will need to be take or sent to Apple for replacement.
    Regards.

  • Sound don't work

    Y my sound don't work

    You probably have liquid damage on your dock. Or a blown speaker. Take it to an Apple store. Male an appointment online and make sure you back up your data. The Genii are not responsible for data loss.

  • Phone sounds don't work with new iOS7

    Since installing iOS7 on iPhone 5, sounds stopped working. All settings are on.  The only way I have found to make work is turning off phone and turning back on.  Works for a bit, and then they all stop, again, including ring tones.  What suggestions are out there?

    Hey Deke53,
    Thanks for the question, and great troubleshooting so far. Because the issue is intermittent, and can temporarily be fixed with a later reoccurrence, it sounds like a restore of software may be necessary.
    You may want to back up your iPhone and restore as new. Once you have setup the iPhone as a new phone, test to see if the issue persists. If it does not, then proceed to restore your backup:
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    http://support.apple.com/kb/HT5262
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • Sound don't works

    How can I turn down the sound on my computer because when I try with the buttons is a circle with a line through it and nothing happened

    MacBook Pro?
    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • The sound don't Work

    hello, I have an audio problem. when I leave the standby I have no sound in the speakers and the headphones.
    PS : sorry for my english

    Back up all data before making any changes.
    1. If anything is plugged into the audio-out port, unplug it before putting the system to sleep.
    2. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
    3. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
    If there's no improvement, or if you're not aware of having installed anything that fits the description, post again.

  • No sound at all for incoming calls, txts, games i tried everything reset, restore , delete content and reset , reset network settings. Alarm sounds work but notification sounds don't work please and mute button is in ring mode

    No sound at all for incoming calls, txts, games. I have checked the side mute switch. Volume is all way up. All notifications are on.  I can hear tones when I go to change them. I can hear my music.  I can hear talking on videos I have taken.  I have tried everything I know to do(reset,restore,reset network settings,reset content and other settings and mute button is not ON)Please help!

    This is exactly the same problem I am having. I dropped the phone one time I think that was the reason. Now I cant seem to find any solution to fix it and it will cost me $149 to buy a new phone? There has to be a way to fix this problem.
    When I put it in speaker phone I can hear but not voices through the phone.

  • IPhone 5s no call/text sounds work. Game sounds done work either. Only sound that works are music and videos

    the call/text sounds don't work. Neither do sounds coming from the games I play(clash of clan) or other apps I use such as snapchat/vine. the sounds only When I play music/videos

    Hi there Prideleader,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    -Griff W. 

  • Notification sounds don't function

    My notification sounds don't work anymore.
    sympthoms
    Phone rings when there's a call
    Speakers work when placed on speaker phone function activated
    but all other notifications - Email, SMS, Whatsapp, Twitter, Facebook all are disabled.
    earphones plugged in - plays music, but speaker doesn't work when unplugged
    Remedies tried:
    - soft reset (sleep/awake button + power button)
    - plugging & removing earphones
    Please help

    It worked yesterday. No changes to the settings but today it's not working.
    But aside from notification sound alerts. The speakers don't work when playing music but work when earphones are plugged in. Very strange.

  • My iPad sound don't at all. I need help

    My iPad sound don't  work at all .

    Do you get sound though headphones, and have you got notifications muted ?
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085
    If not, and if you get sound through headphones, then have you tried inserting and removing them, and/or tried a soft-reset of your iPad to see if you get sound after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Adobe Flash keeps crashing, sound doesn't work (speakers work fine) - done everything I can to fix, nothing works

    Yesterday I noticed on grooveshark (a site where you can stream music), it wasn't loading. everytime I would try and load it, the plugin shockwave flash would crash - sometimes, the site would load, but when i'd stream a song, no sound would play. Youtube videos can't play as well - the page freezes up before the video can load anything. I've tried downloading shockwave flash on mozilla to see if it's just a problem for chrome, but it's my entire computer. Nothing involving sound/adobe flash is working properly. I've spent hours researching on how to fix it - delete caches, disable hardware acceleration, etc. Nothing seems to be working. does anyone have any tips on what I can do to fix this?

    rebootl wrote:
    Really not sure what the problem could be but maybe your device is going into powersave mode ?
    https://wiki.archlinux.org/index.php/Ad … g_Playback
    https://www.kernel.org/doc/Documentatio … ersave.txt
    Regards
    Thanks; it started working after I reboot twice anyways though (which is weird, but oh well I guess).  Hopefully it stays working this time (the funny thing is the sound never previously worked until I'd installed festival/done that muting and unmuting thing).  At least, it never played the startup sound for KDE (other sounds seemed to work, at a time anyways).
    I hate when problems just fix themselves, cuz then if you ever have them again you don't know what to do. 
    Last edited by Zukaro (2012-12-06 20:18:15)

  • The only time the sound/speaker and mic don't work is when I answer or make a call

    The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice. 
    When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
    If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in. 
    I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible. 
    Hopefully the following will provide good clues:  On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

    Let me try and address some of your questions.  I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
    First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone.  So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes.  On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them.  In iTunes, you can go to Store > Check for available downloads. )
    Whenever you plug your phone in, it should create a backup of everything you have on the phone.  This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone.  You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup.   If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
    The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
    You should have no problems restoring from a backup if they give you a new phone.  However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device.   I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
    I've had no problems with my new phone so far.
    I'll try to keep checking this thread if you have any other questions or need more clarification.
    Edit: I should say we never did figure out what exactly was wrong with my phone.  The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one.  But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else.  Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
    Also if you don't already have one, make a genius appointment ASAP.  Most stores are very busy and their appointments fill up fast.  I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you.  The easiest way to make an appointment is to download the Apple Store app.  It detects the closest Apple store from you and makes it quite easy to schedule a genius.
    Message was edited by: deddinty

  • How do I get sounds back? I don't know when an email arrives and my apps with songs don't work

    How do I get my sounds back? My apps with songs don't work and I don't know when a message or email arrives.
    Thanks

    Is it on mute? There is a switch on the side which may be mute or rotation lock. If it locks the rotation, double tap the home button and swipe your finger to the right. You should see volume, brightness, etc... On the far left is a button to mute or lock rotation. Make sure it is not on. If you still can't hear anything, go to settings> general> sounds> ringer and alerts and slide the dot to the right.
    Hope this helps!
    Caleb.

Maybe you are looking for

  • Migrating from old time capsule to a new one

    I have a new Time Capsule (4th gen, 2TB) that I want to replace my old Time Capsule (3rd gen, 2TB). (The rationale is that I was splitting the original between time machine backups and shared home media but it had become full and performance was slug

  • Is not opening... PLEASE HELP !!

    Maybe i'm a bot for others but i'm new in linux life and i like very much Arch Linux from videos. I try to install Arch Linux and succeded but i have a little problem si solved. When the logon screen appears and login with username "root" and passwor

  • Zen micro problem with v3 firmw

    hi i just upgraded my firmware from v2 to v3.00.3 or something like that....and i just imstalled the plugin for the playsforsure devices but my media source is not detecting my zen but wmp is so what should i do .....thnx

  • Shudder on playback

    Hi everyone, i am at my wits end, Ive bought the I mac to do some domestic video editing and spent the last month learning the package, ive imported a HD video from my camcorder and split it up added transistions and audio, im now ready to export it

  • Cant  we create a custom PA infotype whose size is more than 1000 chars?

    can we create a custom PA infotype whose size is more than 1000 characters i have tried this way i have given 4 fields in PM01 transaction with the data element 255 so the total size is 1020 it is throwing an error. pls help......