Sound dosen't work when hdmi cable is in?

when i have Hdmi type cable in for monitor sound does not come out of laptop

Hi @NigeTay66 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook not getting sound with the HDMI cable connected. Here is a fix when speakers not working Windows from Microsoft.
1. Right click speaker icon (lower right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
If you close the all the screens then reopen them this should adjust the settings.
I would be happy to assist if needed as there are many models of HP Notebooks. I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Increasing brush-size crashes Win 8 - when HDMI cable is connected - Why?

Photoshop Elements. Increasing brush-size crashes Windows 8 when HDMI cable connected to TV or data projector. I'm using Asus N56V notebook with Nvidia 635M dedicated graphics card with latest driver.
Any ideas please?
Many thanks,
Clive (UK)

Hi Brian,
Here's an update:
The nub of the problem has been determined by my computer expert as a conflict (as we suspected) between the graphics driver and screen resolution. However the situation is far from dimple. I'll be as brief as possible:
No matter how we approach the settings for the Nvidia driver, when using HDMI, the 'workings' of the compuer automatically reset the driver to either the inbuilt Intel driver and if that's deliberately 'disabled' it reverts to the even more basic Windows 8 driver. As neither card/driver is 'dedicated', the sharing that occurs between the native resolution of the notebook display and the external display (even if this is set to a compatible value) the the computer crashes. It remains OK if a single dsipaly (internal or external) is selected. Dual display (which I must have) is the problem. My computer expert is going to contact Asus about this. He even tried setting the global setting to Nvidia only and it still didn;'t succeed.
I've since spoken with a colleague and he tells me that in the audio-visual community, this is a well known phenomenom with rexcent lapptops/notebooks no matter what to cost or spec - in so far as they ignor the 'dedicated graphics' when on HDMI in favour of the default (shared) driver and hence the problem. Apparently some notebooks are OK but one has to shop around and take pot luck. What a state of affairs!
The Asus notebook works OK using the VGA socket but let's face it, I bought this hi-spec computer for HDMI usage.
This is the story to date. It would appear that software is not the root cause.
I will continue to pursue the matter and find a resolutuion (no pun intended - or perahps it was!)
With all best wishes,
Clive.

My microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

my microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

HI there,
Please see the video link below to learn how to remove the pairing from your iPhone, powercycle the phone, reset the BlueAnt Q2 (please check which BlueAnt device you have and reset as approopriate) and then pair with iPhone again.
http://www.myblueant.com/support/videos/Q2/iPhone/remove_and_reset/
If this does not resolve your problem please contact our customer support team on +1 855 9 BLUEANT or +1 855 9 2583 268.
Hope this helps
Scott

My sound is not working when i play my itunes, my ringers are fine, how do i fix?

my sound is not working when i play my itunes, my ringers are fine, how do i fix?

Here's what hardware troubleshooting suggests:
iPod touch (4th generation): No audio on FaceTime or video recording
Verify that nothing is blocking the microphone (located on the back next to the main camera).
If a protective case is used, try removing the device from the case.
Try turning the device off and back on.
If this does not help, restore your ipod "as new device" without using the latest backup, in case it contains corrupt files. Follow this article to do so: How to back up your data and set up as a new device
If this does not bring back your microphone, contact Apple to get it serviced.

My ipad 2s sound is not working when I have headphones in.

I've had the Ipad 2 for about two years now and my sound doesn't work when I have headphones in. I mean it works but I have to turn the sound up all the way and it sounds like it would be on the lowest sound mark. Is that confusing. I thought it was my headphones at first and it didn't really bother me because I didn't use headphones a lot. I had the same headphone for about a year which is why I thought they were the problem, but a couple of months ago I got some new, really good pair of headphones and they have the same problem. If I am watching youtube without my headphones and I turn it up all the way I can still hear it if I walk upstairs, but if I put headphones in and turn it up all the way I can barely hear the sound. I know it is not the headphones because they work perfectly in my phone. Is it something wrong with the headphone jack and can I get it fixed at apple.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Sound doesn't work when I plug in my monitor to HDMI port

I have a new HP Envy15laptop and an older AcerAC2016W with VGA connection. I purchased a vga to hdmi adapte cable. When I plug in my monitor, the sound shuts down. If I unplug the monitor the laptop speakers work fine.

Hi,l I don't know which VGA to HDMI cable you are talking about but VGA does not carry sound and your machine may think it use HDMI sound therefore it shuts down sound with HDMI, if you wish to use sound from your computer you need to disable HDMI sound: Right click speakers icon > Select Play back devicesSelect use internal sound and disable HDMI sound (if it was there) You have to enable it when use pure HDMI (ie from HDMI to HDMI TV for example) Regards.

Satellite C70D-A-11T - Sound doesn't work with HDMI

Hello,
I have buy a Satellite C70D-A-11T and pass it on Windows 7 64 bits Home Premium.
I install all the drivers and I haven't any problems.
When I want to connect it to my TV for first time, I discover there is no sound on the TV.
I try to go on the speaker (near the clock of windows), right click, sound, first tab (I think it is "Playback" in english... I have a french Windows) and my device (TV) doesn't appear.
I come back on Toshiba Support website to download the last driver "HDMI Audio driver" for my laptop, I connect the cable, and it appear in the sound properties. I select it as my default device and the sound come right from my TV.
Great !
But when I restart my laptop (with or without the HDMI cable), the TV disappear from the list in the sound properties, the only one solution to recover the sound is to reinstall the HDMI Audio Driver.
If I start the driver installation with the "advanced" option, I have the list of drivers to install and I see all drivers are already installed, but the HDMI Audio Driver will be upgraded... I install it and it work until the next restart.
Could you explain me why the version of the driver don't stay on the system, and how to make it work without reinstall it everyday ?
Thanks a lot for your help.
Stephane

Anybody here ? :(

Satellite X200 SLI crashes when HDMI cable is plugged

Hi everybody,
I have X200-21K and since the very beginning the HDMI port doesn't work well - every time the HDMI cable is plugged in the blue screen appears and computer crashes. It behaves same in both SLI and non-SLI modes. The same result is even if I try to boot up with the cable already plugged in - in this case the DOS mode shows up ok on my TV but when Vista tries to load up it crashes again.
I really like the notebook but this starts to annoy me as I can't use the product the way I expected. In the previous thread somebody said it's going to be solved by drivers but there's no updated drivers available.
Does anybody have still the same problem or has somebody been able to solve this? Or do I have to place a warranty claim (I'd really like to avoid this)?
Thanks for help.

Hello
I recommend you to use different HDMI standards (HDMI 1.0, 1.1, 1.2, 1.2a, 1.3). As far as I know there are different HDMI versions. Please talk with your local dealer and test it with some high quality cable.

The internal sound dosen't work

I have a MacBook Pro 17inch unibody 2011
Every thing was just fine until I restarted my mac then when it started up again the sound icon went gray and I can't controlle it any more I also notice that my trash is empty although I had some stuff inside it and my usb slots dosen't work also
I had tied every thing to turn the audio back on but I failed
I am sure that there is nothing wrong with the hardware because I still can hear the music at start up so I think it's something with the software system
Please I need your help

Look at these links to see if they will assist you:http://http://support.apple.com/kb/HT1379
http://http://support.apple.com/kb/HT1379
http://http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
http://http://support.apple.com/kb/HT1895
Ciao.

EP6.0 : Custom workset/Role dosen't work when using Windows authentication

Hi
We have implemented EP6.0 with Windows integrated logon with Active directory.
To create a custom "Transport' role, we copied ( not the delta link) the "Export" workset and put into the custom role. we assigned this role to one user.
When this user logon through the integrated login( without needed the user id/password) although the new menu is visible, the export workset dosen't work( page can not be found).
The same work set work when the user logs in with the userid/password combination.
Also the default SAP provided workset always work.
Thanks
Arunabha

Maybe try OSS #734462 - urlmaxsegmentlength issues.
Had similar problems - pages work w/ userid/password
(same pages don't work w/ NTLM authentication).

X220i: sound doesn't work when camera is activated

Hi all,
I've a weird problem: my sound works well when I'm listening music, video, etc. whith the speakers or an headphone.
But when I activate the camera (for Skype or Google Hangout), the sound stops to work (while the video image works well).
When I try to manage the sound (by making the sound test during a videoconference), I got this error message (sorry, it's in French, it means "Impossible to read the test tone"):
Do you have any idea where the problem comes from?
Thanks in advance.

Hi, djiwai91
If you haven't already, I would recommend trying to update all your drivers and your BIOS to see if that helps. All updates for your system can be found here. After downloading and installing them, test the camera again and see if there are any changes.
Best of luck,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

My right EarPod sporadically doesn't work when the cable is touched by something.

I bought EarPods recently and I can't hear the right EarPod when the cable is touched by something. The problem is that my EarPods have some little 4-5 scratches on them too bad I use things too rough. I wonder the scratches voids the warranty.

- Do other headphones work OK?
- You can always make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Lock sound isn't working when I slide to unlock iPhone5 after iOS 7 upgrade

I just installed iOS 7 (which I now regret doing)...I now notice that the lock sound doesnt work when I "swipe" like it did prior to the iOS 7 upgrade. I checked my Settings/Sounds and the Lock Sounds is set to ON. When I "swipe" (slide to unlock), it unlocks the phone but it does this silently. I've shut the phone off, turned back on(rebooted) but nothing changes. Is this normal now with iOS 7? If so, why do we even have an unlock sound option in the Settings? Does anyone know how to get this fixed. I enjoyed hearing the unlock "click" sound prior to iOS 7.

I have an iPhone 5 and an iPad Mini, but I only had the problem on the iPad Mini but this fix may work for you.
This is what I posted in another thread:
I HAVE FIGURED OUT THE FIX FOR THIS! ... (Well it worked for me on my iPad Mini.)
I saw a post from an apple rep telling a iOS 6 user to turn the side switch on to un-mute the sounds. A no-brainier yes, but it made me wonder if the side switch may have been temporarily "confused" after updating to iOS 7 because it added the new settings screen that swipes up from the bottom of the screen. I was using my side-switch to lock the screen rotation and it was in the "off" (down) position (red visible) and none of my notifications were sounding. So I flipped it up and down a couple times which didn't solve the problem. So logically, I proceeded to what inevitably solved the problem...
Go to Settings > General / "Use Side Switch To" and select the opposite of what you are currently using. I had mine on Lock Rotation, so I selected Mute. Then flip your switch up and down slowly a couple of times to see that the confirmation on the screen is correct. You may have to go back to settings again and select the other choice if you originally had Mute selected, I don't know because I originally had Lock Rotation in use.
Hopefully, this will fix your notification sounds (and the lock sound when you press the power button). After using this fix, you can set the use of the side switch to your preference and still have all of your notification sounds!

Satellite p55-A sounds just stops working when I listen to music or watch Netflix

Every time I listen to music about 3 songs in the sound will mute. When I turn it back up it goes back to the setting I had it on and then a little later does it again. I tried restoring the computer, turning it on and off, and tried different settings but it's still the same.

Good luck. This is a problem for many individuals. Please let me know if you find an answer. I don't know why Toshiba won't provide a solution to so many people that have this problem.

Sound won't work when my MacBook is connected to my TV via HDMI

I have my MacBook connected to my HDTV via mini DVI to HDMI and the picture is perfect, but I cannot make the sound work. I've tried going to sound under system preferences but my tv is not listed as a device. Do you know how I can make the sound work?

You need an audio cable to connect your Mac's audio out port to your TV's audio in port. The minidisplayport does not send sound.

Sound dosen't work when hdmi cable is in?

Similar Messages

Maybe you are looking for