Sound driver does not work after reinstalling XP on Tecra M9

Hi,
After lot's of fighting i've given up. It's just been imposible to get my sound card up a running on my TECRA M9 PTM91E, after i decided to give it a clean up by formating the disk entirely. My proceedure goes as follows:
1. Installed WINDOWS XP SP2
2. Downloaded of all drivers on another pc. Downloads from toshiba's official driver site: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES
3. Installed drivers in correct order following instructions: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftedd-files2%2f0%2finstall-20070918164527.zip
4. No luck when attempting to install sound card driver (download page specifies an integrated realtek) tried following version first: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2f81.27.174.52%2ftedd-files2%2f0%2fsound-20071002102843.zip
5. Messed around trying older drivers from other TECRA M Series laptops, no luck either.
6. Decided sound card just might not be a Realtek and tried other models on the download page: Sigma and Analog Devices Inc. Tried those but got back a non recognition alert.
Has anyone had this problem as well? My best guess it's just might be a problem about the driver version...

Yes, I have exactly the same problem.
We are building our master unit and we *must* do a install from bare metal of all the software. We do an automated provisioning for the rest of our massive purchase.
We have build a custom version of the Windows XP SP2 installation CD (with disk and chipset drivers injected). It has been working ok.
We have installed all the software drivers using the same procedure as yours (in the order proposed in install.txt).
The only thing that has failed is the sound.
This is the first place we ask for a solution. I hope we will have an answer (from toshiba) soon.

Similar Messages

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • CD/DVD drive does not work after Win 8 intsallation

    from a month i've updated my windows into windows 8, everything is working great but the DVD-RW .
    When i put empty cd and try to open it, it gives me error while opening saying:
    "windows was unable to complete the format"
    So is that a software or a hardware problem?!
    waiting for the help !

    Does this mean that your CD/DVD drive does not work anymore and is not recognized by system?
    If yes, then I would recommend checking this Toshiba document which I found on the knowledge base portal webpage:
    +Why does my CD/DVD Drive not work after upgrading to Windows 8?+
    http://aps2.toshiba-tro.de/kb0/FAQ2B03F10002R01.htm
    You will need to uninstall the Toshiba programs:
    TOSHIBA Recovery Media Creator
    TOSHIBA Disc Creator

  • Tecra 9000: After SP2 installation the Yamaha sound driver does not work

    Hi,
    I own a Tecra 9000, with a Yamaha AC-XG sound card.
    The problem is that since I installed Windows XP with SP2 included, I lost my sound.
    I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
    Detail:
    The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
    Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
    yacxg.sys 6.13.10.2152 with software synthesizer
    yacxgc.sys 6.13.10.3152 without software synthesizer
    How to fix this issue:
    Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
    Install steps:
    (1) Unzip an attached file on your hard disk.
    (2) Run SETUP.EXE
    (3) Click the Next button.
    (4) Choose "Yes, I want to restart my computer now" and click Finish.
    A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
    And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
    I already tried lots of different drivers, including generic and yamaha drivers.
    Please tell me a good solution for this issue if possible.
    Thank you very much,
    Hugo

    Hi Hugo
    It seems today is your lucky day ;)
    Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
    I found also a solution for your tiny issue ;)
    As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
    Please take a look here:
    Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
    http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
    Good luck

  • Mail search function does not work after reinstalling

    Hello!
    I recently had to re-install Leopard on my MacBook Pro.
    I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
    All mails are present, and everything works great, apart from the fact that the search function does not work.
    I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
    What can I do about it ?

    It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
    Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
    Thanks to leonie for some information contained in this.

  • My sound device does not work after yesterdays update

    after the last update my sound device is out of system.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Re: Satellite A200-1MY: XP sound driver does not work

    Hello,
    I have a problem concerning my sound driver ( I use windows XP) . I installed all the xp drivers and it still doesn't work.
    Can anyone tell me where to get a working driver ?
    Thanks.

    I hope you use WXP SP2. Anyway check please this thread. Try to use instruction given by Eldorado.

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • Satellite L870-165 does not work after being repaired by their service

    Laptop Toshiba warranty does not work after being repaired by their service twice.
    Model: Satellite L870-165
    Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    After reboot still happening the same.
    I called Toshiba phone incident and after trying several options I said take him to repair the service.
    They first told me it was the hard drive, then phoned me to indicate that reinstalling and finally it was the motherboard, which supposedly changed. The day after being picked computer repair returned to give exactly the same error, only malfunctioned one evening.
    After another call to 902 the Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I got home the computer did not start even once, again gives the same error.
    I believe that this team comes with a factory default so that its solution is not easy because even the technical service told me that I did not know what else to do with it.

    >Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    This message pops up because the notebook cannot find the Windows system.
    There could be either an problem with the HDD or maybe the HDD is OK but the Windows system isnt preinstalled properly.
    You said that the service agent changed the HDD. But did someone install the Windows system?
    You can try to do it yourself take your recovery disk (hopefully you created such disk in the past) and boot from the recovery disk in order to install the system.
    In case booting from the Disk would not be possible, go to BIOS (F2) and disable the secure boot and change from UEFI to CSM mode

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

    Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

  • Satellite A110-228 LAN does not work after hibernate

    Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
    It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
    After a reboot, the network functions as usual (gets a IP address from the DHCP server)
    Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
    The wireless network will be restored after a hibernate.
    It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
    Any suggestions?
    Wilm Boerhout

    Hi guys
    In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
    I think the options are disabled by default.
    Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
    Please check this how to enable WOL (first time use):
    1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
    2. Enable Wake-up on LAN
    3. Click [Apply]. System will request to reboot.
    4. After the reboot go to [Start] -> [Control Panel] -> select [System]
    5. On system properties dialog box select [Hardware] tab -> click [Device manager]
    6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
    7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
    8. Press [OK] to close the dialog box.

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Maybe you are looking for