Sound drops off no drivers

DV6707us P/N KC3233UAHA3A Bio F.25
Tried several time to do a full recovery it worked fine sound ok for a while then on the next boot red x in start menu no sound,
Device manager show no sound,video and game controllers all gone and no sound, I cannot get the sound back at all. Can you tell me if this is a bad sound board or a software problems? Is there a fix or patch and is this a common problem with this model?

Try this Out
http://support.microsoft.com/Fixit/
Good Luck
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

Sound drops off after 15 minutes after upgrading from windows 7 to Windows 8.1.

I upgraded my PC from Windows 7 to Windows 8. Then, from Windows 8 to Wimdows 8.1. When playing a Movie I've downloaded from iTunes it plays normally for a good while. Then, after 15 minuites or so the sound drops off. If I close and reopen iTunes it plays again for about the same time. I had to do that five or six times to get through a movie. I've tried installing the latest sound drivers, uninstalling and reinstalling the latests iTunes with no luck fixing the issue. I have my PC connected to my TV via HDMI cable. Any suggestions?

Hi,
You could download and install the trial version of Photoshop Elements 12.
For your serial number, try this:-
Go to Adobe.com and there should be a button to Manage account - click on that and sign in with your Adobe Id.
Click on View All under Plans & Products
Click on View other products
After a short while, you should see your Photoshop Elements appear and you can expand it to see your serial number.
The serial number can be entered into the trial version to activate it.
Do you have your catalog and images?
Brian

Sound drops off when using hdmi outport to connect computer to an AV reciever

Satellite M640,I5 2410 processor, windows 7HP. After about three minutes the sound drops off when connected to the av reciever through the hdmi outport. If I touch the trackpad the computer reconnects for another three minutes and then disconnects. If I touch the the trackpad about every two minutes the computer stays connected indefinetly. This problem does not occur if I use the computer to play an audio CD. Any fix suggestions.

Hi peter,
try to repair your permission by open application folder > utilities > disk utility > repair permission.
It should fixed the unexpectedly quit for several applications.
And try to get latest info from Griffin sites, maybe this one will help too:
http://www.griffintechnology.com/support/article.php?artnum=314
ps: why not try macbook built in microphone?
Good Luck.

AirPlay Mirroring from Mac to Apple TV intermittent sound drop-off

I can't stream iTunes or Spotify to my Apple TV without getting intermittent sound drop-out (say every 30 seconds) when I use AirPlay mirroring through my Mac. This odd thing is streaming through my iPad or IPhone to Apple TV is perfectly fine; so is using my Mac to stream to my Sonos speakers. I can even stream iTunes pefectly fine through only the Apple TV alone - so it's nothing to do with my broadband connection
I have today performed upgrades to the Apple TV and my Airport Express firmware but the problem persists. Anyone else experiencing this or found a solution?

Hi, same here for me. Using AirPlay for streaming music from my Mac Mini (iTunes latest version) to my ATV2 (software latest version) has intermittent drop-outs (about every 10 to 15 sec for 5 to 10 sec). At the same time streaming to my Airport Express station in the kitchen works fine. Using the VOX player streaming from the Mac to the ATV works fine, only that I can only stream to one destination. Tried streaming from iTunes to ATV only, the problem remains. Streaming video - even HD - works fine. Using the ATV to select music from my Mac's iTunes library works fine, too. Still I want to stream from my iTunes on the Mac to several destiations including the ATV. Seems to me to be a problem of iTunes. I think the effect appeared after an update of iTunes or OSX, because it had worked fine before, already.

Mini DV Camcorder Has Sound Drop off When Recording to Tape

I'm wondering what my correct a problem with a camcorder... audio seems to stop recording after 45-50 min. Model PV-DV530. Would setting to NTSC Firewire Basic.

Unless you are using a Canon camcorder, you probably should be using DV-NTSC Firewire - not Basic.
Have you fully rendered the project before output?
Have you done an "audio mixdown" (look it up) before output?
Do you have the material on a non-system drive? Is that drive less than 75% full?
If these things don't work, try exporting a self-contained version of the timeline, import that back into the project, put it in it's own sequence then send that out to tape.
good luck,
x

Audio suddenly drop off when Airplaying video into Apple TV

I´m trying to stream the content from my MacBook Air into my TV via my Apple TV using Airplay. Both audio and video work fine the first seconds on the TV then, suddenly, the sound drops off.
All the sw is updated, the problem began after the latest Apple TV update.
Does anybody have any ideas on how to solve this ?? (The solutions exposed in other threads doesn´t solve my problem)
Thank you in advance

+I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
+If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
A used Mini will usually lack the Apple warranty.
Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software.

Itunes sound drop

On certain tracks on Itunes, the sound drops off completely as if muted, but the song still plays. naturally, this tranfers to my ipod. any suggestions? running 10.6.8, and itunes 10.5.3. Thanks

ok... have found a common thread to this problem. all of the issues are occuring on cd's i imported to itunes. anyone with suggestions or ideas what is going on?

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

Audigy 2 ZS Video Editor - recording audio from optical digital in - sound drops

Hi guys
I've had an audigy 2 zs video editor for a couple of months now and it's greatly improved my audio output from my computer.
But the other day I started trying to record vinyl onto my computer directly.
In the past I've always used my hifi cd recorder deck, then ripped the audio off the cd.
So I have my turntable connected to my amp, and I use my minidisc deck as a DAC, then record using an optical from my minidisc DAC, to the optical input on the front of the audigy.
So I fire up the creative smart recorder software and start messing with the levels.
I also use a free bit of software from
http://www.darkwood.demon.co.uk/PC/meter.html
called meterV which gives me a larger and more prominent read out of the level.
I then fine tune the output level on my DAC.
I have the stereo line out sockets on my audigy connected to an input on my hifi amplifier for listening to digital music etc.
So I start the vinyl and the sound starts coming through my DAC into my soundcard, the level readings start going, and the sound comes out of my hifi speakers.
My amp's switched to the audigy input - not the turntable
The problem is... every 30 seconds or so, the sound cuts out for 2-3 seconds and then resumes.
But the sound doesn't drop off on the level meters, or on the actual recording (recording 44.khz, 6bit wav file).
Only on the stereo line out of the audigy.
I ran the following test to see if the sound also cut out on the optical and coax outputs...
Whilst recording from the optical input, I've also tried recording to a minidisc portable from the optical out at the same time.
And the sound cuts out the same as when listening to the stereo line outs.
So the sound cuts off on the line out, the optical out, and also the coax out.
But this only happens when recording from the optical input.
When recording from the stereo line in - the sound doesn't cut out on any output!!!
The input selected in creative smart recorder is SPDIF.
This problem happens when smart recorder isn't even running - if I'm just listening to the line outs the sound cuts out.
But if I'm just playing back an MP3 or any sound, and there's nothing coming into the inputs, then playback is fine!!
So it's not a connection issue!
It doesn't seem to be triggered by sound frequencies - it seems to happen every 30-40 seconds no matter what is being recorded (it does the same thing when playing a CD so it's not just when using a turntable)
I've tried restarting the computer several times.
All the connections are properly seated.
I've had task manager loaded whilst this is happening to check CPU usage, and nothing - it just continues in a fairly straight line as normal. No spikes in CPU usage (I would have thought it unlikely that the video editor would be affected by such things anyway being an external box).
There is nothing else connected to USB - other than an internal memory card reader attached to a motherboard USB header.
And a wireless adaptor also connected to the motherboard - but the problem still happens when the wireless adaptor is disabled.
There's also nothing else connected to the USB ports on the Video Editor box.
Machine spec:
Shuttle SN4G2-v3
AMD Athlon XP 3000+
GB memory
80GB IDE HDD, 2 x external Lacie FireWire 250GB dri'ves
LG dual layer dvd/rw/ram
Win XP Pro SP2
I've not upgraded firmware or drivers - just used the installation from the CD.
What confuses me is why this only happens when recording from the optical input, and it affects all outputs but the recording and the level monitor show no trace of the temporary loss in sound!
So the audigy is receiving the sound, but it just drops off the outputs for some reason!
Any ideas?
I hope the above explanation is clear.
Thanks
Ben

batfastad wrote:
Sorry for not replying - have been away for the past few days.
Ok, so I go to Creative Device Control, and on the PCI/USB tab I've changed the sampling rate to 48khz.
It was previously at 44.kHz
The bit depth is still at 6bit
Now the problem seems to be solved.
The problem was only with the output from the device. And now there are no skips!!
Excellent!
Why has that solved it though?
I've read on other forums (head-fi) that the audigy cards do not run at 44.kHz nati'vely so the sound has to be downsampled.
Is that skipping an artefact of that downsampling process?
Will having that set at 48kHz, but recording to a 44.kHz 6bit wav file theoretically reduce the quality of the recording - compared to having it set at 44.kHz and recording a wav at 44.kHz?
On the SPDIF tab the input sample rate is shown as 44.kHz - as that's what is output by the DAC in my minidisc deck.
But when I changed the sampling rate on the PCI/USB tab, the SPDIF output sampling rate also changed to 48kHz.
This means if I wanted to record from the optical output, whilst also recording to the computer, and that device only supported 44.kHz - I can't do that?
You listed some main reasons to the truth, why Creative SB cards are not very popular on serious use (DAW). I.e. need for resampling. X-Fi's in creation mode are (least said to be) the only ones not resample everything.
There is a setting for "Bit-Accurate-Recording" (digital modes only) --> have you tried if that works on your recordings?
jutapa

HP Color LaserJet 1500L - drops off the 802.11n network

My HP Color LaserJet 1500L drops off the network (it just stops printing). This happens when it is plugged into the usb bus of my new 802.11n base station or directly into the usb bus of a computer. The only way to fix it seems to be to plug it directly into a computer and unplug the usb plug and replug it, or to add the printer again. This problem has occurred in the past, but over time, and after various upgrades to the operating systems and hardware, etc, the situation tends to change. Before I installed the 802.11n base station the printer was staying in contact with my computers, but now it is misbehaving again. I doubt there is a real solution out there now, because it happened before and I never did discover a direct fix, but I thought the problem to be worth posting. This problem does not happen with my Canon PhotoPrinter iP6000S, which sticks to my network like glue whereever I plug it in (airport express, airport extreme, direct to computer, etc.) The HP loses contact with either of my computers in exactly the same way.
Mac Pro Intel Core 2 Duo, and iMac Intel Core Duo Mac OS X (10.4.8) airport express, airport extreme 802.11n, cable modem
iMac Intel Core Duo Mac OS X (10.4.8)

To use the OS X standard network protocols (Windows/IP printing), you must have either a postscript printer (the driver in that case is just a ppd for the OS X postscript output) OR, a driver designed to work with CUPS (CUPS driver). HP doesn't provide CUPS drivers for OS X (who knows why, since they do for linux).
You need to install foomatic and ESP ghostscript:
http://www.linuxprinting.org/macosx/foomatic/
then, install the foo2oak driver:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet1500

Embedded Sounds Cut off Early

This is a repost of a question I oriinally posted here http://stackoverflow.com/questions/11321441/embedded-sounds-cut-off-early .
I figure this is one someone who knows the compiler part of Flash intimately will need to answer (if there is a good answer--if not I probably need to file a bug report).
I have a combined Flash Builder/Flash Pro project. Because of the hassles involving in maintaining sound assets on the timeline, my sounds are all embedded into Class files, like:
[Embed (source="/mp3/Welcome_01_V.mp3", mimeType="audio/mpeg")]
private static const WELCOME_1:Class;
These files are then referenced by the base Classes for the symbols that need them, embedded for Actionscript on Frame 10 (because the second frame label is on Frame 10 to give space for you to read the first one).
What I'm finding is that a few of these Sounds don't play all the way through, but the SoundChannel dispatches the "soundComplete" event, and its final position matches the Sound's length.
All sounds are converted from wav to mp3 at 44kHz / 16 kbps using dbPowerAmp. I faked out the compiler to avoid a reference to Flex by including a dummy SoundAsset that extends Sound.
I don't know what other steps to take to debug this. Is there a way to figure out whether the problem is on the compile side or on the run side?
More things I have tried:
Looked at the Size report: The nonworking sounds were smaller in their embedded form than the source mp3
Got rid of my own BitmapAsset and let Flash link in the Flex Framework and do whatever that does (definitely worse)
Dropped the encoding from 44 kHz to 22 kHz (no improvement or worse)
Dropped the bit rate to 8kbps (the lowest dbPowerAmp, the tool I use, supports). This usually helps somewhat, but I still usually use a word or two from the end of the file
Dropped both parameters in the encoding. This helped a few that just dropping the bit rate didn't, but not all files. Plus it sounds tinny.
Note that the file size and length of the Flash file does not seem to be what causes this--I have had 50k+ files that did fine, yet had a problem with files < 20k.
Thanks!

Have you tried disabling Omnisphere, just for a test, to see if the problem is occurring with just the built-in plug-ins? Another thing to try, if you haven't already done so go ahead and display the CPU meter.. you to this in the app's Display preference pane. Then double click on the CPU side of the meter in the toolbar. This will open a CPU monitoring window... and you can instantly see how much CPU each plug-in is using... assuming it's a CPU overload that's causing it.
Not sure if this is how you are using it, but if for instance you play something with Patch A and when you switch to Patch B you're either holding sustain or you want the sound to crossover into Patch B so it tails nicely... at this point you have both Patch A and Patch B active at the same time. If both those patches have 2 Omnispheres you actually talking about 4. Maybe this isn't exactly what you're doing, but you get the idea.
Can you stand to have a slightly bugger size? Maybe try 256. Oh, and definately quit all other apps and perhaps turn off airport.

Intermittent Sound Dropping When Streaming Audio

I've just step up my new Apple TV and streaming from my shared iTunes library over wireless network is great.. However when I stream using airplay on my iPad 3 or iPhone 5 the sound drops intermittently, as if the signal wasn't getting through, if you know what I mean! sometimes drops altogether and airplay on the device seems to switch off.
I can't see any settings that I could change even if I wanted to (or knew what to!) and it seems strange that it works fine from the pc but not from the other Apple products.
The wireless signal is obviously ok, or could it be the wireless bits n the iPhone/Pad are not as good as in the pc? Clutching at straws a bit here, hope someone out there can help.
Thanks.

Thanks for posting this because I too have the Pioneer VSX-1019AH and have just noticed this problem. I rarely listen to my iphone (ipod) through my receiver and this problem never occured before until yesterday.
I am experiencing a sound loss at random times, and it takes restarting the receiver, or disconnecting then reconnecting the iphone cable to get the sound back again, only for it to go off again in a few moments time.
Whilst the sound is off, both the iphone and receiver are continuing to play music because you can see the title of the tracks change on both devices. So where the fault lies is hard to tell but I'd say it's with the ios4.
I don't know whether Apple will provide any support regarding this problem but I do notice the receiver has been endorsed "made for ipod" which means it meets Apple performance standards.

Distiller 9 Font Dropping Off in some places

Our work flow is as follows:
.ps files are created in Quark 7.5, exported to a watched folder and distilled (all fonts embedded) generating a pdf.
Said pdf files are then placed into a new multi-page Quark document (the pdfs are ad files in a newspaper) and the whole document is exported as multi .ps files and distilled on my computer in distiller 9.2
This is where the problem starts. Some glyphs are missing from ad files at random in the final PDF'ed piece. Pre-flight does not catch this problem and re-pdfing the same postscript file always remedys the situation. I am trying to find a way to erradicate this problem because I do not always catch these missing glyphs and the paper goes to press like this.
I have included a file. The ad in the lower left is missing part of its title. What is strange is all fonts on these placed pdfs are embedded so the re-pdfing process should not change the overall result. Any help would be greatly appreciated, even if we can just get prefllight to spot this problem (it's blind to it thus far).

Yeah, I see the missing text. This may sound crazy but have you tried taking the hot folder out of the equation? You might consider a way of streamlining that workflow. As strange as it may sound I have had instances where text dropped off when sending an .eps through Distiller, yielding different results then having the preset I wanted set in Distiller and dragging and dropping the .eps onto the Acrobat icon. The different was, going straight through Distiller made text disappear. I posted a question about this happening on this very forum and was told there is no difference in what occurs when these two different ways of creating a PDF are implemented. These .eps files also had fonts embedded.
When I make PDF files from Quark I always use File>Export>Layout as PDF. Sounds like you may need to do some testing with this problamatic file. The up shot is, you may be abel to work up a better workflow and reduce your cycle times.

Sound dropping when iPod connected to stereo - iOS 4.1

Why is the sound dropping when watching videos from the iPod when connected to a TV?
I have a Pioneer VSX-1019AH-K AV receiver with this nice setup (cable and functionality) that lets me watch videos on my TV with the iPod connected to the AVR (USB + composite video cable). The result is not bad, with better video than audio.
HOWEVER after upgrading to iOS 4.1 the sound (not picture) is dropping after various intervals of time (1 - 20 minutes) while plugged into the AVR. When I unplug the connection the video stops and the iPod goes back to the menu. The audio plays normally when restarting the video without the cable and continues to play normally when I plug the AVR cable back into the iPod. On occassions when plugging the AVR's cable into the iPod the sound does not come back, though unpluggin and plugging in again usually does it.
Anyone else have similar issues? I see some issues with apps and battery life under iOS4.1 and a few issues with audio / picture playback:
http://discussions.apple.com/thread.jspa?threadID=2579535&tstart=15
http://discussions.apple.com/thread.jspa?threadID=2577571&tstart=15
http://discussions.apple.com/thread.jspa?threadID=2582339&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2582478&tstart=30
http://discussions.apple.com/thread.jspa?threadID=2578926&tstart=0
Have people had similar problems when iPods are connected to AVRs or TVs through composite or component cables? I realize the quality of sound / pictures from the iPod is not superb though it is as good as my sattelite dish. I could just have a computer connected to the AVR via HDMI or similar but well that would mean having a computer just for iTunes.

Thanks for posting this because I too have the Pioneer VSX-1019AH and have just noticed this problem. I rarely listen to my iphone (ipod) through my receiver and this problem never occured before until yesterday.
I am experiencing a sound loss at random times, and it takes restarting the receiver, or disconnecting then reconnecting the iphone cable to get the sound back again, only for it to go off again in a few moments time.
Whilst the sound is off, both the iphone and receiver are continuing to play music because you can see the title of the tracks change on both devices. So where the fault lies is hard to tell but I'd say it's with the ios4.
I don't know whether Apple will provide any support regarding this problem but I do notice the receiver has been endorsed "made for ipod" which means it meets Apple performance standards.

TS4000 When I create a reminder the date/time will not stay attached to the reminder. It initially sets then drops off. Any ideas?

When I create a reminder the date/time will not stay attached to the reminder. It initially sets then drops off. Any ideas?

Sounds like we have a similar problem. Four days ago I was playing music through a wireless Bose speaker via bluetooth and everything was fine. Then I was texting while listening and got 2 texts about the same time as I was typing one and my phone went black. I pushed the home button and it worked, went into my texts and all were there. However ever since then the time isn't right, so it can't keep time no matter what I do. The bluetooth works only at times, the wifi keeps jumping on and off, sometimes my data won't work and the other day I couldn't even turn it off, so had to wait until it died. The battery life display at that moment wasn't correct either. Took to Verizon, they couldn't help. Suggested a factory reset, which I did last night and still the same issues! One day I couldn't even text my husband on his iPhone. Just wouldn't work at all. Did everything suggest and still not good. Seems like after stalking these pages today a lot of people are having this problem in Dec/Jan and of course also I'm 3 weeks out of my 1 year warranty and so were many others, by days. Very strange, and all on the 5C. What did you do? Is it working now?

Sound drops off no drivers

Similar Messages

Maybe you are looking for