Sound during import, but no clip capture or sound on playback,

There is sound in iMovie 5 from computer when importing video from camera, BUT no clips on shelf and no sound in playback. No wave in extracted audio. Video playback OK, but pale. Any ideas?
Thanks.
OS10.4.10, Gammyguy

Sorry if I came off a bit testy. I use the Apple TV daily in my work environment for background noise and the issues totally derailed my workflow this morning.
So, I tried adjusting audio settings for both Dolby Digital and Audio Out. No luck.
Last resort time. Hardwired (USB cable) to my laptop and restored via iTunes. Success, audio fuctional across all apps. Not the best of solutions because of the time required to restore accounts for the various 3rd party apps on the Apple TV but it worked.
Guess I will never know what caused the 'no audio" issue though I suspect a bad/failed auto update. As convenient as that new feature is, it doesn't help when things go wrong.
A final note, beta software is supposed to be buggy, I undertstand. Production stuff isn't. I've been a loyal Apple user for 20+ years now because of their quality control. I've used competing products too and felt very annoyed at the lack of QC (looking at you Google TV). I would love to see quicker addressing of bugs on the Apple TV OS because a bad experience is what drives less-technical users away. It is a real game changer device if Apple were to even attempt to give it the level of support that other products get. Anyways, that's my soapbox moment.

Similar Messages

No sound during import from camcorder

When I am importing video from a DV tape in a camcorder I don't hear any sound. After the clip is captured, you can hear the sound during playback. Is there a setting that allows you to hear the sound during import? I have tried importing HDV format from a camcorder and regular DV from a tape deck with the same results.

iMovie does not play sound on import. This makes sense if you consider that most current camcorders do not import in real time. They are faster or slower than real time depending on the speed of the Mac.
See if your camera has a speaker. You can listen from the camcorder.

I have no sound playing games but video and music has sound

I have a brand new ipad2 that works perfect except there is no sound playing games. If you use headphones there is sound. Video, music etc. All have sound.

Check the side switch above the volume rocker on the side of the iPad. FLip it the other way and see if you get sound from the apps.
If not, double tap the home button to bring up the task bar at the bottom. In the task bar swipe all the way to the right. Look on the far left side and see if there is a speaker icon. If there is, tap it and see if the sounds on apps come back. Then tap the home button.
You can change how the side switch works to either lock screen rotation or to mute system sounds. You can go to Settings>General>Set Side switch to Lock Rotation or mute. If you choose mute, the switch will turn off apps sounds. Otherwise you use the task bar as described above to mute those sounds.

My iphone 4 keeps saying it is connected to a dock connector and my sound wont play but in my headphones the sound plays can someone please help me?

please please please help me

Hello Youngdoby,
Thank you for using Apple Support Communities!
It sounds like the phone thinks it is still plugged into a dock connection but it is not.
I would first recommend, if you do have a dock connection, plug it in there and if it shows in iTunes eject it first, then unplug it. If it does not show in iTunes unplug it, and then reset the device with this process:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
That should get your iPhone working properly again.
Take care,
Sterling

TS3274 My apps sound has stopped working. Music and Internet sound is fine but all games have no sound

My sound has stopped working only on games
Works fine for Internet and music
How do I fix this?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

How to remove existing keywords during import?

I have tried to find a way to NOT import existing keywords present in files that are already on my system, when I am importing those files into my library. They mess up my existing keyword structure and I just want to ignore them during import. I tried to enter an empty keyword text area with checkbox ticked in the template I apply during import, but that doesn't do the trick for reasons I don't comprehend. Any clues?

To tell you the truth, I don't think the Lighroom Import function has the capability of removing keywords.
Your choices seem to be ...
Remove keywords after import, in which case you would also have to remove the unwanted keyword from your hierarchy
Use freeware tools like Geosetter or Exiftool to remove the keywords from your photos before importing

Having trouble importing a movie clip in iM9

I am having trouble getting a video clip I made into iMovie 9.
I recorded this video clip on my Android cellphone.   When I uploaded it into my computer, it came up on my desktop with the tag .mp4. I found that I could not select it for importing into iMovie, and suspected that iMovie doesn't like the .mp4 tag. So I opened up QuickTime and converted the clip into a movie with the .mov tag. The new converted movie's thumnail correctly showed up on my desktop.
I then opened up iMovie and opened up my project, complete with the Event Library open. I did File>Import>Movies and choose my clip.   I got the normal visual and aural indications of a successful import, but the clip did not show up in my project. In fact it did not show up anywhere in iMovie.
I'm wondering what I need to to do find this clip or at least do something else so that I can put it into my project.   Thanks!

More info: I pulled up Finder>Movies>iMovie Events>My Project>iMovie Cache> and my clip was there in fine fettle.
But I still can't find a way to get it to appear in my project's Event Library, which is what it should do, once I've imported it. (I believe.)

IPhone suddenly no sound during phone conversation! Help!

Hi all,
Recently my iPhone suddenly no sound during phone conversation, can't hear any sound from the other side. However if i choose 'handfree' during call engaging then it's ok for external speaker. Also listening music is ok...
Also I obsevered that the light-sensor won't blank the screen. Is it hardware issue so that I have to send to Apple for repair?
Please help!! Thanks.
Regards,

Fixed..refer to some old post. Re-insert headphone plug several times and solved.

How do I fix sound not importing properly from a Fuji video capture (MPEG, 48000 compressed) on Premier Elements 11 (just imports chopped noise)?

Can anyone help? When I add .Mov MPEG video file captured with a Fuji camera (1920x1080 image, 29.97 frame rate, 48000Hz stereo compressed sound), although the video is smooth/good, the sound gets added but its just a clipped noise rather than the actual sound track. The video & sound play fine on all other software on my PC, even if just play the file using Adobe Organizer, BUT Premier will not import it correctly....help...

9
Please give us more information.
What computer operating system is your Premiere Elements 11 running on? When you view and listen to the playback of the Timeline video in the Edit area monitor, are you working with the rendered or unrendered Timeline?
What is the model/settings of the Fuji camera that recording the video? The settings seem to be for 1080 but is that 1080i or 1080p?
Are you saying that your video has a .mov file extension? What is the significance of MPEG video - I am thinking in terms of video compression? AVCHD, H.264, MotionJPEG, or other for video compression?
What are you or the project setting as the project preset to match the properties of the source video?
(See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio (even if they look grayed out.)
Do you have the latest version of QuickTime installed on your computer? If you go into Publish+Share/Computer/QuickTime, do you see all the QuickTime presets? Please explore Edit Menu/Preferences/Audio Hardware ASIO settings Input as well as Output.
We will be watching for your progress.
Thanks.
ATR

Freeze up during clip capture with random change of in and out points

Having BIG problems capturing DV footage which began late last Fall. While performing a capture (assigned clips) footage would go down for a few seconds then would freeze (picture only, the audio continued) then after several seconds the picture would "catch up" and continue.
Found a solution here in the FCP forum where I had my firewire drives "ignored" by SPOTLIGHT by listing them in the privacy selection. Worked and moved on.
I have a project now where the problem has come up again. Once again during a clip capture it did what it did before - but now it ignores the assigned in point (audio but no video and almost consistently delaying it by 9 seconds into the capture) then freezes (at the assigned outpoint - sometimes) then continues to play on (audio only) then resumes (again catching up) then stops announcing a SUCCESSFUL CAPTURE. When the clip is selected to preview it plays back from the incorrect in point, freezes, then plays until the catch up - with now the audio out of sync. More craziness because now the log information now has changed: the MEDIA START & END information is not what was inputed so the DURATION TIME is now different and sometimes it adds a MARK OUT point (!?). I rarely use the CAPTURE NOW function but even trying that the footage still freezes up and goes out of sync.
I worked the SPOTLIGHT routine again with no change. Have completely optimized my system drive and external hard drives using DISKWARRIOR 4.1
I accept all the auto software up dates that come through UPDATER and see that I received a updated Quicktime version 7.5 on 13 June 08. I also noticed that I don't have CLASSIC OS 9 supported and seemed to have read here about something about FIREWIRE DRIVERS that maybe missing?
Was thinking of upgrading to 10.5 to see if that helps - but unsure about my FCP version/compatability...
So, here I sit frustrated since I have used FCP (which I LOVE) for quite a few years with great success - this is crazy! OF course, I have a project which deadline is looming!
Any ideas?
Much appreciation..
Here's my computer stats:
G4 Powerbook
OS 10.4.11
FCP 5.0.4
QT 7.5
Sony DSR-11 recorder/player
4-Firewire Drives with 20gigs of space available

So far have done a workaround to digitize my DV elements through iMovie. Not pretty. I string together the selected/import clips (in this case from interviews), assemble them in sequential order on the time line with small breaks of black in between, then export the timeline as DVCPRO/DV-NTSC quicktime file. Take that file into my FCP then segment out the clips on the time line, make each segment an independent clip so that I can name them. Not pretty but it works - miss having the logging data going through FCP log and capture.
Still waiting for any other solution to my situation - thanks!
John

Import a clip captured in i Movie

Is it possible somehow import to FCP a clip captured in i Movie?
I had a problem with time code breaks (which occurred every 1-3 minutes without obvious reason) while capturing in FCP. It takes enormous time to edit all these small pieces... I tried to avoid this using i Movie for capture... but now I see, I can't use the captured file. Or can I?

Not sure if you can build a sequence to match the .dv codec that iMovie uses... you might start there.
OR - use something like QT Pro player to export your video to Quicktime DV/PAL (or NTSC) 48k/16bit.
Then drag those into a normal DV setup for yourself.
Good luck,
CaptM

CS6, using GH2 - ACVHD/MTS files. No sound importing of some clips.

I'm using Windows 7, CS6.
Can someone help with this problem? It's the first time it's happened. On certain GH2/ACVHD/MTS video files, I am not getting any sound imported. But other clips from the same camera and shoot are fine. For example clips 0000, 0001, 0002, 0003, 0004, no sound is being imported. Clips 0005 and onward the sound is just fine. What is going on? Thank you.

Thanks for your quick response Jeff,
I imagine it has, I just could not find it here. Now, so is there a quick way for me to learn how to:
"copy the entire folder structure of the memory card from the camera to your hard drive"? I've just
been doing it the same way I always have before, I don't know how to do it any other way. Just putting
brining the files into a folder on a drive and importing. How do I do what you suggest, or where can I
learn to do that.
As for the "Media Browser" the same, I guess once I learn how to do the first part, I'll also find the
"Media Browser."
Thanks for your patience, I just never ran into this before.

Why do i getThe following clip encountered an error during import and is still referencing media on the camera:

When importing in FCPX 10.1.3 I get: The following clip encountered an error during import and is still referencing media on the camera: ??? anyone

I get this sometimes too, when importing from P2 cards. Sometimes it takes me a few tries to get it imported. I have noticed that it seems to work better when I actually mark an IN and Out for the clip, but that's not totally a solution.

Read settings in NEFs from Nikon Capture during import?

Short version: during import, I would like Lightroom to detect and then approximate edits that I have made to NEFs with Nikon Capture.
Longer version: I have several thousand images that I've previously (individually) edited in Nikon Capture. Is there anyway to capture the gist of these edits *on an individual file basis* when importing into Lightroom, or am I limited to the Lightroom default and my own Lightroom presets? I don't expect Lightroom to *exactly* duplicate whatever I've done in Capture, but it would be nice if it pick up some of the information.
I've searched the forums for this, but didn't find anything relevant. My apologies if this is a duplicate post.
thanks,
Robert Jones

On Sun, 4 Mar 2007 22:25:03 -0800, [email protected] wrote:
>Is there anyway to capture the gist of these edits *on an individual file basis* when importing into Lightroom
From what I see here, LR simply ignores [or cannot see*] edits from
Capture [NX]; all my manipulated files come in as they were shot, not
as they are saved afterwards. In some cases - e.g. when you used the
brush tool, probably other tools, too - LR cannot even import the NEF.
Same holds for NEFs created with Capture.
*The problem has more to do with Nikon than Adobe, as N does not
disclose their NEF metadata structure. To the contrary, they not only
put loads of interesting information in the manufacturer's section -
thus hiding them in effect - they use encryption for some data (white
balance is the only known one but ...).
Dierk (sometimes known as Evo2Me)
[DH² Publishing]
www.DH2Publishing.info
Writing and Imaging

Only half of the video clips have sound after import to Premiere Pro

Hi!
When I import my .MTS fukes into Premiere Pro 2014 longer clips loose sound after half the clip. The clips themselves have sound because they are with sound when I watch them using VLC.
How can this sound issue be solved?

Thanks for the screenshot.
Hmm. I don't recall any other reports of a problem like this with MTS files. [Just today I was working on a similar issue with P2 content, but it was limited to spanned clips. Hence that question...]
First thing I'd try is to clear the media cache files, at least for the affected clips. You should find those files here: C:\Users\<username>\AppData\Roaming\Adobe\Common\. If not there, then check Preferences>Media.

Sound during import, but no clip capture or sound on playback,

Similar Messages

Maybe you are looking for