Sound Effects DURING Slide Transitions?

Essentially, is there a way to add a sound clip to play between slides, during the transition?
I'm creating a Keynote presentation that will be exported into Quicktime with hyperlink-activated transitions, and would like a specific sound to play during the 'Magic Move' transition. When the sound is imported into the first slide, once the transition begins, it fades out and stops. Yet if I drag and drop the sound file between the slides, it just creates a blank slide with the sound effect icon in the middle.
Any ideas?

Nope, unless you have a soundtrack on your show, there's no other way to have sound during a transition.

Similar Messages

  • Sound effects During a transition

    Is there a way to play sound DURING a transition from one slide to the next? e.g. I would like to use the Shutter transition and play a camera shutter sound effect while you see the shutter close and open. Another example would be a bang during a Fall transition, as if it hit the floor. I currently have a large library of effects I can use.

    Greetings and welcome to the forum.
    Sorry to be the bearer of bad tidings, but what you want to do - while an excellent idea - is not possible with the current version of Keynote. You might want to address this to the Keynote Feedback Forum as an "enhancement request."
    http://www.apple.com./feedback/keynote.html
    Good luck.

  • Pixel effects during photo transitions

    I've just burned a DVD slideshow, and when I play it in my home theater, the photos briefly develop a "pixel" effect (pixels briefly outline objects in the photos; sorry, I don't know how else to explain this) as they transition from one photo to the next. I don't see this effect when I play the DVD on my G5. Does anyone have any insights as to what might be occuring and how I can correct this? It's very distracting. Thanks!
    iMac G5   Mac OS X (10.3.9)  

    re: pixel effects during playback of iDVD slideshow:
    Thank you each for responding (F Shippey, Beatty1, and Len Goff) - taking my media to the home theater shop and trial the slideshow in other DVD players. But my current player is a Panasonic advanced progressive scan, 6 months old, and my understanding is that Panasonic is one of the better makers in terms of compatability with computer-generated slideshows, etc. I hope I have to fork out for a different player, as that $$ would be a nicer outcome than having to put up with the effect "pixelizing" has on the eyes.

  • No sound during playback (but sound effects are working)

    Was there a bad incremental update in the last 24 hours? Woke up this morning to find that my 2nd Gen Apple TV has gone mute. But only during playback of videos or music. The clicking sound effect during navigation comes through just fine. Tried this over HDMI and the Digital out, with both a receiver and directly to the tv. Also tried it with multiple apps so it isn't app specific. Hope Apple fixes this soon.

    Sorry if I came off a bit testy. I use the Apple TV daily in my work environment for background noise and the issues totally derailed my workflow this morning.
    So, I tried adjusting audio settings for both Dolby Digital and Audio Out. No luck.
    Last resort time. Hardwired (USB cable) to my laptop and restored via iTunes. Success, audio fuctional across all apps. Not the best of solutions because of the time required to restore accounts for the various 3rd party apps on the Apple TV but it worked.
    Guess I will never know what caused the 'no audio" issue though I suspect a bad/failed auto update. As convenient as that new feature is, it doesn't help when things go wrong.
    A final note, beta software is supposed to be buggy, I undertstand. Production stuff isn't. I've been a loyal Apple user for 20+ years now because of their quality control. I've used competing products too and felt very annoyed at the lack of QC (looking at you Google TV). I would love to see quicker addressing of bugs on the Apple TV OS because a bad experience is what drives less-technical users away. It is a real game changer device if Apple were to even attempt to give it the level of support that other products get. Anyways, that's my soapbox moment.

  • How can I eliminate the annoying sound effect at startup on my iMac?

    How can I eliminate that annoying sound effect during the startup on my iMac?

    Sorry about high-jacking your thread! Just occasionally some of us lapse into humour to keep sane.
    Please post back if you don't feel you have had a proper reply to your question.

  • How to add sound effect to a slide in keynote on IPAD1

    How do I add a sound effect to a slide in Keynote on a IPAD1?

    MattiMattMatt wrote:
    I'm looking at GB 11 right now, so I don't know if this translate exactly to '09, but I think it's similar if it doesn't:
    Looking at the shown Master Track, on the automation menu of options on the track (that lists volume, pitch tempo - whatever you want to send a curve through) there's another choice on the bottom: "add automation." You select this which gives you a dialog box and the option to add an automation curve for any of the Master Effects you've added in that Edit box on the right hand side.
    Clicking a parameter in that dialog box will add the category to that menu, and then you can create a curve for it (using a two-dot quick ramp up from 0 to whatever value you want, then a two-dot ramp down at the end) for just the measures you want.
    Ive done Add Automation, and Automatic Filter is now available on the "Add Automation". (Although Frequency, Resonance, Mode, Intensity & Speed are down as 5 seperate tick boxes under Automatic Filter and I'd like to just be able to select Automatic filter and not have to change each of these 5 independently and it just work from what I have set it to manually on left hand side).
    I've added points/dots to the curve during the section I need it, but this moves the filter up and down over that point AND from the very start of the song to the very end of the song.
    Where does the point/dot need to be/set to at the Start of the song upto the point I want the filter to kick?
    So there would be NO filter on the track from Bar 1 to end of Bar 9
    Then, where does the point need to be/set to at the end of song from the end of the filtered section?
    So there would be NO filter on the track from Bar 13 to end of the song?
    So just to confirm I want
    Bar 1 to end of Bar 9 - NO FILTER
    Bar 10 to end of Bar 12 - Filter
    Bar 13 to end of song - NO FILTER
    Thanking you in advance for a speedy response.

  • How to keep the last slide image in the background during loading transition??

    Does anyone have any good strategies for using the last slide as a static background image when one swf file transitions to another during the loading process?  Basically, I'd like to keep the loading image ontop of the last slide during the transition.

    Does this fairly recent post help?
    http://forums.adobe.com/thread/561129
    Erik

  • Sound problems during transitions?

    Ok, i'm attempting to add a transition between a clip of some Talent Show MCs talking(I'm trying to cut out while they are saying something) right to a person singing, in then middle of a song. The sound is giving me issues, as the MCs keep talking while the singer starts singing, how do i make the sound during the transitions stop?
    Thanks.
    Once the video stops, the audio keeps going, how do i fix it? That's what i need to know...i think.
    Message was edited by: Chanciffer

    I had the same problem - I couldn't figure out how to turn off the sound during transitions, and it was annoying because I had cut my clips exactly where I wanted the sound to end, but the transition does a fade-out with the clip before the transition, and a fade-in with the next clip, so it was adding additional audio that I did not want!
    Here's my work-around:
    (1) Take the clip before the transition, and cut it exactly where you want the sound to end.
    (2) Right click and select "Detach Audio."
    (3) Extend the length of the video clip (at the end) a little for better video during the transition.
    (4) Take the clip after the transition, and cut it exactly where you want the sound to start.
    (5) Right click and select "Detach Audio."
    (6) Extend the length of the video clip (at the beginning) a little bit for better video during the transition.
    Now there will be no sound during the transition, the audio will be perfect, and the transition will look smooth.
    If someone knows an easier way to turn off the sound during a transition, please post it here. If not, I hope these instructions help!

  • Transition Conflict on VI When I Delete A 5 Second Sound Effect ?

    I inserted a Cartoon Boing sound effect all by itself on A3/A4 in my HDV project.
    When I decided to delete it (successfully) I got a warning - "Transition Conflict on V1".
    I am not doing anything with V1 and this solitary sound effect is not connected with anything else.
    Why the warning?
    Sorry! I have just realised that I am editing HDV natively in FCP 6.0.3 and have posted this in the wrong forum - but no doubt this warning applies equally to FCE and FCP.
    Message was edited by: Ian R. Brown

    hey Ian
    As you've noted, the issue is related to the different commands represented by the Forward Delete and Backspace Delete keys ... the Forward Delete is a "Ripple" Delete .. the Backspace Delete is a "Lift" Delete.
    In this instance, when you perform a ripple delete of a clip on your audio track, then FCP wants to keep everything sync'd up across all tracks ... but it cant because there are clips in the way on V1. hence the warning that the operation would cause a clip collision
    Make sense?
    Andy

  • After upgrade to iOS8, very slow, no volume slider bar, no volume through the iPad although the headphones work. My volume slider bar now reads"Sound Effects"?? Mute is off, need help. So frustrated!

    I need help! After upgrading to iOS8.1.2 , my volume slider bar disappeared and is now "Sound Effects" ??? I have no external sound. Do have sound through headphones. Mute is off. Have tried resetting several times with no luck. Frustration level is building as I have wasted hours now on this. Any help would be greatly appreciated!

    I do not think apple will do much to help you under warrenty,  as this was caused by a fall.  (alas!)
    I think the case is, as you suggest, jamming the rocker down, and it may have damaged the swith itself.  Can you carefully lever it out of the way?   Very very carefully.   If it is already broken, there is not much harm you can do by trying. 
    If it is just the switch being jammed, you might be able to move it out a little.  If it is the swith itself, you will need some real service after your three hour drive.  You might check your loacl area for a closer service repair source.

  • Sound effects for transitions

    Hello
    I was watching a TV show recently and during the transitions they played a whooshing sound FX to emphasise the transition. Does anyone know where I can get hold of these sounds?
    Regards
    Adrian

    Eric-
    For the most part, iMovie HD works on 10.3.9. The only reason you need 10.4.4 is for themes (chapter title pages ect.).
    "Can I use all the features in iLife 06 for iMovie,"
    I don't know about HD TV, but you can use all the features except for themes
    -Dean

  • How to add sound in each slide of powerpoint 2013

    Hi,
    I want to add sound in each slide of my powerpoint presentations in 2013.Please let us know how to do these things.
    Regards
    Pradeep

    Hi Pradeep,
    I would like to confirm that how exactly you want PowerPoint 2013 to play a sound. For example, add sound to your PowerPoint slide transitions, add background music, or play a sound during an Animation.
    To play a sound during a transition, go to the Transitions tab on the ribbon, apply a transition, then click the drop-down for
    Sound, and choose one from the list.
    To add audio in the background, you can go to the Insert tab on the ribbon and click the
    Audio button, choosing Online Audio... to search a clip media on Office.com or select a sound from your computer by selecting
    Audio on My PC...
    To add sound effects to an animation, you can refer to this article:https://support.office.com/en-us/article/Add-sound-effects-to-an-animation-7d0e2d70-caca-495e-a738-a8257474605e
    Hope it helps.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to add a sound on some slides?

    How to add a sound on some slides? Not only one slide and not all the slideshow?
    Is it possible? It must be!

    Keynote is not Powerpoint and vice versa. The way music is currently handled in Keynote has been explained. If you wish music to play across only a few contiguous slides, you make them a seperate file and hyperlink to them using an object for the hyperlink.
    Once built, and properly used, the transition from one set of slides to the next set is smooth and the audience will not know (or care) if there is one, two or fifty hyperlinked files behind the curtain. What they see is the content, the message and the effective use of a visuals to backup your actual live presentation. The files you create are not the presentation, you and all you bring to the audience are the presentation.  You are simply using a tool to assist youself to help your audience better understand your message.
    Using Keynote is found by many presenters to be an easier application to use. If you find Powerpoint easier, by all means use it. Your message will be basically the same to your audience, if done properly.
    Feedback is a good way to ask for changes but given the rate of change, learning those few simple workarounds and using them effectively will help you use Keynote (or Powerpoint - yes there are limitations there too) to easily put your point across. Your audience will sense your frustrations as a distraction so it is better to accept the few limitations and make your presentation shine in spite of them.
    Good luck.

  • Sound effects for animated builds

    I'm using Keynote 6.2.2 on a 2013 15 inch MBP with retina display running the latest Mavericks.  I am trying to apply some sound effects (from the Garageband library, converted to MP3 format) to animated builds - specifically, the sound of a typewriter applied to text using the Typewriter build, and a crashing sound applied to an image using the Anvil effect. 
    I have searched the web, these support forums, Keynote help, and tried all the manipulations of the Build Order that I can think of, but whatever I do I cannot get the sound to actually play during the build.  It will play if I click on the icon on the slide, but not as part of the build.  Has anyone else had this problem?  Is there some simple setting I am missing?  Is this a known issue in Keynote 6?
    Any help appreciated...thanks...John

    To make the animated builds work correctly with the sound effects and build in the correct sequence, I had to use the Build Order panel to place the sound effect before (above) the build object, then adjust the timings to make it all hang together.
    Every time I placed the sound after the build object the build sequence went askew and everything seemed to build at once, ignoring the sequencing in the Build Order panel.
    cheers...john

  • Slide transition animation and image in the slide master

    Hi,
    I placed an image in one of the slide masters, because I want that image static in the slide background. But when I add a transition to the slides made with that master, the image I placed is animated too. Should I do something else in the slide master so the image I placed is not affected by the slide transition?
    Macbook Pro Retina with OS X Yosemite and Keynote 6.5
    Regards.

    There is no such thing as an object transition, objects are animated using Builds or Actions:   Inspector > Animate
    I'm referring to "Object Effects" in the Transitions pull down (Object Push, Object Revolve, Object Flip, etc). So yes, technically there is an Object (transition) effect where objects transition between slides.
    Backgrounds do not animate when using Builds or Actions.
    True. However, if you use the last version of Keynote (before 6.5 and the Yosemite update) and place an image on the master slide it will not animate when applying many of the Object Effects.
    When an action or or Build is applied to an objet, the slide or the background does not animate, only the object animates.
    Same point as I made above.
    No EnzoFT said,  "when I add a transition to the slides made with that master, the image I placed is animated too."
    EnzoFT was using a slide transition therefore any object on a slide will be included in the effect.
    If you try what I said above in the previous version of Keynote, it will not animate. However, I found out how to make an image on the master slide NOT animate in Keynote 6.5 (I made a comment earlier in the thread about this). Open the master slide, select the Slide Layout, change the background to Image Fill, and the image won’t animate from one slide to the next when you apply an Object Effects transition to a slide.
    That is a very narrow minded personal opinion.
    Selecting a transition, Build or Action should be based on how it enhances the presentation and what you want to animate; the slide, the object or both.
    Narrow minded personal opinion?!? Do you really need to go there? I was simply making an observation.
    Use Builds or Actions.
    There has been no change;  Transitions affect the whole slide, Builds and Actions affect objects on a slide.
    If you try what I mentioned above there has been a change. Thanks for offering advice, but doing a little research in the future before replying to issues will help with providing more accurate information.

Maybe you are looking for