Sound Effects - need 'record needle remove'

Hey all,
Does anyone know where i can find a VERY SPECIFIC sound effect? I am looking for one that is like removing a needle from a vinyl record - it is not a 'rap scratch' which I have found oodles of sound effects for. This would be removing the needle while dragging it across a few of the grooves giving the 'removal scratch'...
thoughts?
thks

have a look "hear" at www.wavcentral.com for a start.... ??

Similar Messages

  • How to add sound effects to recorded sound?

    HI there
    I am making  an app which will record ur voice and then add sound effects to it. How can i add those sound effects such as a higher pitch

    Hi AhmadTheXboy,
    Actually this forum is to discuss the VS IDE usage, this issue would be related to the specific language development.
    Feng Chen shared us some samples here:
    How
    do I capture sound?
    The following threads is about the similar issue, they use the VB language in winform apps.
    How
    to add music and sound effects to a Windows Form Application?
    how
    to create sound recorder
    Hope they could provide useful information for you.
    If still no help, please select the correct language development forum here:
    http://social.msdn.microsoft.com/Forums/en-US/home?category=vslanguages&filter=alltypes&sort=lastpostdesc
    Sincerely,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • I am using logic to record a podcast and using soundboard to use as a playback for music and sound effects.  I'd like to soft patch sound board into logic, and still use my interface for recording audio from the other members of the podcast.

    I am using logic to record a podcast.  I have a presonus firestudio mobile for my interface so I can record several people at the same time.  I'm also using Soundboard for a playback system for music and sound effects.  I'd like to know how to soft patch Soundboard into Logic while still using the Firestudio interface to record the other members of the podcast.  Does anyone know how to do this? and if so can you tell me how to do it?  Thanks.

    Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

  • After upgrade to iOS8, very slow, no volume slider bar, no volume through the iPad although the headphones work. My volume slider bar now reads"Sound Effects"?? Mute is off, need help. So frustrated!

    I need help! After upgrading to iOS8.1.2 , my volume slider bar disappeared and is now "Sound Effects" ??? I have no external sound. Do have sound through headphones. Mute is off. Have tried resetting several times with no luck. Frustration level is building as I have wasted hours now on this. Any help would be greatly appreciated!

    I do not think apple will do much to help you under warrenty,  as this was caused by a fall.  (alas!)
    I think the case is, as you suggest, jamming the rocker down, and it may have damaged the swith itself.  Can you carefully lever it out of the way?   Very very carefully.   If it is already broken, there is not much harm you can do by trying. 
    If it is just the switch being jammed, you might be able to move it out a little.  If it is the swith itself, you will need some real service after your three hour drive.  You might check your loacl area for a closer service repair source.

  • Recording Sound Effects

    Hello:
    I'm developing an iOS app, and a sound effect that I purchased is not able to used in the app.  Since I can't find a similar sound effect that can be used, can I record the sound effect on GarageBand and use it in the app?  It will be a paid app, not a free one.
    Thank you in advance.

    Your question is more related to app development, plus the GarageBand for the iPad (This is a GarageBand. for OSX forum).
    If I understand you right, then I would look at the IAA (Inter-App Audio) feature. This is the new standard that lets you route audio (and other data) between audio apps on iOS devices. The standard was developed by Apple and is supported by a growing nuymbers of audio apps, including GarageBand for iPad.
    Another similar format is Audiobus, that is also supported by many audio apps.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Record start-up Sound effect

    Good evening,
    I'm working in FCE and am trying to figure out a way of creating a sound effect as though an LP were on a turntable that was just turned on so the sound would go from slow to normal speed. If this description makes sense, is there anyone who might be able to explain how I might do this. I'm assuming the SoundTrack might be the place to do this but I just don't have the knowledge on how.
    Thanks.
    BurntMonkey

    Hi(Bonjour)!
    You'll need FCE HD 3.5 to do this effect.
    Select the clip you want to apply your effect in timeline.
    Use the Effect-->audio Filters--> Apple--> AUPitch.
    Double click your filtered clip to open it in viewer, select filter tab, select AuPitch filter and add a keyframe to the start of your clip with a -1000 Pitch value. Move the playhead where you want the full speed audio, add a new keyframe and resume pitch value to 0.
    Render and control the result.
    Michel Boissonneault

  • Why does my new garageband 10.0.03 not have the legacy with sound effects or radio sound preset or applause preset???? I need these to be able to chop samples into the keyboard keys by dragging and dropping them into the keys.

    I am just trying to chop samples and drop them into a track with legacy-sound effects- radio sounds, so that I can play with them and chop them onto keys. I see a bunch of videos on youtube showing you how to do it, but I can't find those kits on the newest garageband.

    All these effects are part of the loops in the iLife Sound effects loop package, that was a part of the application bundle iLIfe '11 (iPhoto. iMovie, GarageBand '11).  These loops are neither installed by GarageBand 10.0 or GarageBand '11, nor MacOs X, you need an iLife '11 installer disk to get these loops.
    And GarageBand 10 also does not have the Sound Effects instruments any longer, that let you drag samples onto keys. It is one of the sorely missed features, that have been discontinued in the new version GarageBand 10. even if you install the previous version, GarageBAnd '11, to add the Sound effects instrument to GarageBand 10. it will not work properly, because GarageBand 10 will not save the custom instrument with the samples. You will have to complete your song in one session, without quitting GarageBand.
    You may want to send feedback to the Apple Developers about these missing features with a feature request:   Apple - GarageBand Mac- Feedback

  • How do I remove the "whoosh" sound effect?

    I recently downloaded OS X Mountain Lion and I like the added features but I'm getting annoyed by what seems to be random "whoosh" noises. How can I disable this sound effect? Thanks a bunch! kmart69

    Try this System Preferences>Sounds>Sound Effects tab and deselect 'Play user interface sound effects'.
    If it's in Mail go to Mail>Preferences>General tab and you can control sounds there (independently of the above suggestion).
    I expect other applications may also have there own Sound Preferences that can be modified on an app to app basis.

  • I have the sound effects icon in the middle of my screen, how do I remove it?

    I have the sound effects icon in the middle of my screen and I want it to go away! How do I get rid of  it?

    Try giving your iPad a reset. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and see if that fixes it.

  • How do I remove the new annoying sound effect in iTunes 8?

    How annoying???? I find the sound effects to be annoying whenever you click on one of the buttons in iTunes? For instance, when you click on "Music" or "Movies" etc. we now get a ridiculous sound effect.
    Does anyone know how to turn it off? I have looked in all of the options but there doesn't seem to be any way of doing this.
    Please help as it is driving me insane and I may have to start using a different media player for my music.
    Many thanks for any help you can give.
    Cheers
    Darren
    <Edited by Moderator>

    Isn't it horrid?
    I turned off the Genius sidebar with the triangle icon in the lower right of the screen. No more sound and you can still get Genius playlists.
    Hope this helps

  • (My post isn't showing up?) Sound effect muffles/is louder than the other audio layers

    I want to point out that the last time I posted this, the discussion was completely blank. This is a repost and hopefully it won't be blank this time
    In my most recent short movie, I decided that I would focus a lot more on sound than I normally do, so bought a microphone, a recorder and a boom pole etc. I also decided to implement more sound effects (Bear in mind that I'm 16, not a professional).
    Here's the video -  http://www.youtube.com/watch?v=qGkrFVZ0e5I (I think embedding the video was causing problems with posting)
    Note that at about 0:10 seconds in, you can hear an alarm ringing, but also a sort of 'thump' sound (It's actually the sound of a vault opening/closing). You couldn't hear it normally, so I turned the bass up on it to 17dB. When playing it back in the timeline, it sounds perfectly fine, but when I export the video, much like the attached one, it's muffled and you can't hear the alarm or anything else.
    Unfortunately I didn't have time to try and fix it, also that scene takes a while to export so I couldn't quite do any trial and error.
    Now however, I'm going to enter the video into a small competition, so I thought I'd try and fix it...because it does sound terrible/unprofessional.
    Any suggestions? Remember, it sounds perfect (In my opinion) when playing it back in the timeline. I'm using Premiere Pro CS5.5 on an 11,2 (October 2010) iMac running Mac OSX Snow Leopard 10.6.8, it's also being exported to a G-Drive FireWire 800 hard drive, not a RAID, perhaps that could be a problem?

    "One thing which is realistically within your reach at this time and could really help you on future projects is if you can come up with some sort of beginning, middle and end"
    That's one of the problems, people kept saying "Oh, this line's too long..." and shortnening it, and like Jim said "If you can't fire people, you're at their mercy" so I can't exactly deduct pay or anything...because they're not being paid
    They even started saying "Woah! We've completely changed the script! hahaha!". Just shows how little they actually cared. And the script really was changed, I would send you the script but I don't want to veer too far from the topic
    "You may need to find some way to compensate them for their time though"
    I was going to bring a box of Coca Cola, but I thought it would be a bit hard to carry around...and I was kind of glad I didn't because I don't feel they quite deserved it and they were already a bit hyper. Maybe it would have gone better if I did bring the Coke, but I'll definitely order some pizza next time.
    "Just software."
    Great software that is! I don't know where I'd be without the student discount.
    Anyway let's get back to the question.
    I glanced at this a bit - http://www.uaudio.com/blog/understanding-audio-phase/
    And tried using the original MP3. It still didn't sound good.
    I then tried exporting the sound on its own, with the bass, then imported it, but it still didn't sound as good.
    I asked my friend (Who happens to also have the surname 'Curtis') and he said "just sounds to me like you have it so loud that it's clipping" and suggested that I "multitrack" it, basically layer several of them on top of each other, but that didn't work either.
    He decided to add the bass in and fix the 'clipping'. It sounded good, but once imported, you could barely hear it, so I thought I'd try putting the bass up to 17dB like before...had the same problem. It seems to only sound nice/fitting with the 17dB bass...am I just going to have to turn it down and live with it?

  • Minor AIFF Sound Effect

    I realize this is a minor problem but I have an Sound effect in iMovie 6.0.3 , along with many others, and it will not burn in my iDVD project. Not to a DVD or Disc Image, nothing.
    I remove it from iMovie and it will burn in iDVD. I realize this is the solution to burn it but would like this sound effect in if possible. As I said , I have much music and other sound effects in this movie but this one is giving me trouble. I was looking for suggestions that I could try from any of you.
    Thanks

    You can use WireTap Pro to record the sound effect, creating an AIFC file. Name it whatever you wish, save it to your desktop, and drag/drop it directly into iMovie's audio track. You can put it into iTunes so it will be available whenever you want.
    WireTap Pro is a neat little app that records anything that will produce sound in your computer. I use it a lot to make audio clips of part of a song, or to copy the audio of one of my video clips that I replace with still photo. It is much faster than extracting audio from a short clip. I also use it when iMovie won't play a purchased tune instead of burning to cd and reimporting. WireTap can be run while iMovie is open. It also can be used to drag/drop an audio file into iDVD.
    iMac FP 1GHz 80GB 1.25RAM, ext drives: Maxtor, Lacie   Mac OS X (10.4.8)   iPhoto6.0.5, iTunes7.0.2, iMovie6.0.3, iDVD6.0.3

  • Creative Sound Blaster Not Recording Microph

    Hi guys,
    I am totally frustrated. Just recently I had to do a system restore. I have the good ol reliable Sound Blaster 2NX model SB0300. I use this mainly to record my elvis impersonation (lol).
    But as is the case with System restore; The creti've application was effecti'vely rendered useless. I have lost the isntallation CD so I tried manual download here; that did not work so then I did the auto.
    sound blaster is working, playing music, in fact it sounds better than before. After system restore I also updated all the computer drivers...so they're up to date.
    Now then, I can hear my voice and music an all but, its not recording. When I press the record button an error message appears to effect "The recording format is not supported". I am unable to even use the other appliactions I use to record music eg REAPER etc and now I am not able to recod vocals. At fist I thought it was the sound card mixing but now I am suspecting the Blaster.
    I have read most of the threads here and have played arround (ie sound mixing?& selecting "what U hear", in fact i've tried all the selections exhausting all possibilities; so now I'm seeking help from the experts.
    Help.
    What to do!?

    Profanity-riddled abusi've posts removed, and account banned.
    Bye bye.
    Cat

  • When using side buttons, volumes says sound effects

    Not sure what happened here.  Is it a mistake by a 3 year old or a bug issue.  Started about a month ago that when i open apps that have sound the volume goes mute, meaning sound and keyboard and lock too.  Even when i close the app down and open say a video type app, there will be no sound.  I will push the side buttons and the gray box that should say volume says sound effect.  I have already done the reset with holding home and lock buttons, can't remeber how many times.  I have also reset the iPad,  i have synced it too.  Please help

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Sound effects only no headphones

    When I use the sidebar to addjust the volume it only adjusts sound effects (headphones).  I am not using headphones and I can not hear anything unless I plug in the headphones.

    Most likely a mechanical problem.  Insert/remove the headphone multiple times and see if the problem clears.  If it does not, you need to contact Apple.

Maybe you are looking for