Sound fails when opening new sound "sources" quickly after one another

I hava a problem when the sound on Arch running XFCE.
At first, there was no sound. I searched for a solution, and found one that seemingly did help. I created .asoundrc in ~ with this text:
pcm.!default {
type plug
slave.pcm {
@func getenv
vars [ ALSAPCM ]
default "hw:PCH"
This should set the default sound card (as my motherboard have both PCH and HDMI sound card).
Now there is sound, but it fails when i switch from different sound "sources" (like different YouTube-videoes). For the sound to work again, I have to refresh the page, and generally wait some 20 seconds.
My motherboard is MSI GAMING 3 Z97, and I don't have more sound card than what is on that card.
So I was hoping for some help. It's not a big problem, but a bit irritating. :)

I'm going to go out on a limb and guess that you've got a custom timecode field somewhere in your production and/or asset metadata group(s), right? And I'm going to further guess that this timecode field has dashes in it like this --:--:--:--, right? If so, try this: Click the arrow next to the timecode field and adjust the timecode so that it has a number (it doesn't matter what the number is as long it's not dashes - "00:00:00:00" is fine). Then Save this asset, close it and then reopen it and see if the beeping madness has vanished. Then, to make this change permanent for all of your new assets, make sure to edit the default value of any custom timecode fields to put zeros (or some other numeric default value) into them when a new asset is generated. If the asset still beeps when you open it, check the other metadata groups in your set to see if there isn't another empty timecode field lurking in the shadows.
Jason

Similar Messages

How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

How can I turn off Recently Visited Websites when opening new Safari window?
After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
Thank you for your time, patience, understanding, kindness, and concern.

Thanks for replying, but that isn't the answer I am looking for. Also, there is no + sign, UNLESS you do tap the overlapping boxes.
Let me try to ask my question a little more clearly:
When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
So my question is, HOW DO I TURN THESE OPTION OFF?
*UPDATE (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
Have a blessed day.

Adobe updater mac version fails when opening Master Suite CS3 products after reinstall from drive crash

When I open a CS3 Adobe Product I get a screen that says "Adobe Updater Failed". I reinstalled the suite after a hard disk failure and re-registered the product. I'm sure that there are many updates since this suite came out many years ago, and I want to update to the latest versions.

I have since downloaded a new version of Adobe Updater 5, but now when i launch, the the error screen: "Check your internet connections, Updater cannot connect to the web [paraphrased]", shows up. Of course the internet connection is there for safari, firefox and chrome.

Why does Firefox get hung up, when opening new pages? I've tried disabling plugins and extensions to no avail.

Initially, when I open Firefox everything opens very quickly. However, after several minutes it gets hung up when opening new pages. I have close the browser and reopen it to start over. But each time it does the same thing. Works well at first then poops out. The trouble started yesterday. Before then, I never had any problems.
I've tried disabling all the plugins and extensions, but it doesn't make any difference.

Try to repair the disk permissions:
* http://thexlab.com/faqs/repairprocess.html
* http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X

Problem creating playlists library window closes when opening new playlist

library window closes when opening new playlist impossible to drag and drop songs from lib to new playlist

Hi
You don't need to open a playlist to drag and drop from your library. Just open the library and drag the selected item or items to the NAME of the chosen playlist (in blue bars on the lower left) and just drop it there. When you hold the items over the playlist name, it will show you a little green dot with a plus sign in it and the number or items being dropped. Then when you are done dragging and dropping you can open the playlist and see that the items were added. Hope this makes sense.
Good luck!

Fading background when opening new window

Fading background when opening new window. I would like to do a "lightbox" effect that on mouseclick opens a new window over the top of the other windows(s) that has a close button to take the user back to the previous page. I have viewed this in the past, but now cannot find examples. If you have URLS of examples, or better yet, code to make this happen, that would be helpful. Thoughts and opinions on why I shouldn't use this effect are also welcome!

If you need a lightbox effect, use one the freely available "lightbox" or modal window scripts.
Fancy Box is well documented and works with images, text, iframes, Google Maps, media, etc..
http://fancybox.net/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to stop newtab-page flickering/refreshing when opening new tabs by ctrl-clicking thumbnails?

Often when opening new tabs from thumbnails in newtab-page (about:newtab) the whole newtab-page refreshes itself or otherwise flickers. This sometimes causes that some new tabs are not opened when ctrl-clicking multiple thumbnails in a row. Does the newtab-page recalculate after every click what thumbnails it should show and this could cause the flickering effect? (Although I don't see changes in thumbnail order.)

Hi FFanatic,
Please update to version 32 to see if this is still happening. Go to About Firefox and click the update button.

Drummer region starts with fill on 1 bar when open new project.

Drummer region starts with fill on 1 bar when open new project
and if I copy a region, say 10 times, they all starts with a fill.
So my work around is to delete the automatic generated regions
and make new ones. If I need to copy many regions I copy one
at a time. Using latest LX.
Anyone experienced this? Do I miss something in the process?

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Warning: Failed to clean up the source mailbox after the move

Hi!
After moving a mailbox between databases (EMC or EMS), there is a warning: Warning: Failed to clean up the source mailbox after the move. Erro details: MapiExceptionUnexpectedMailboxState: Unable to delete mailbox. (hr=0x80004005, ec=2634).
Users can successfully access mailboxes, but these mailboxes stay in disconected mailbox node on EMC, and it is shown on EMS afer command [PS] C:\> Get-MailboxDatabase | Get-MailboxStatistics | where {$_.DisconnectReason -ne $null} and their databases are
the old ones.
We have recently upgraded from SP2 to SP2 RU4, but we´re not sure when this problem started.
Our Environment:
Windows Server 2008 R2 Enterprise SP1
Windows Roles: File Services, Web Server (IIS)
Exchange Server 14.02.0318.001 (Build 247.5) Roles MBX, DAG with one more MBX identical Server
Antivirus: Forefront Endpoint Protection Version: 2.1.1116.0
Virtualization: Yes – Hyper-V
Applications: Backup Agent CA, SCCM Agent, SCOM Agent, HP Management Tools
Any idea?
Thankyou in advance!
Fabio Martins MCDST/MCSA Brasil!!!

I recently upgraded our Exchange 2010 servers (CAS/HUB and MBX) from SP1 to SP3 RU6 and now I'm encountering this issue when doing mailbox moves. I opened a support case with Microsoft and it appears that they are aware that SP 3 RU1 doesn't fix
the issue in all cases. Below is the response I received from the support engineer.
=====
Based on my research and case experience, we have several customers report that even if they are running Exchange 2010 SP3 RU1 or later version(for example, one of customer is running Exchange 2010 SP3 RU4 and another is also in CU6 environment), they also
have such issue. When they move mailbox, it completed with warning message that source mailbox can’t be cleaned up after the mailbox move operation. This issue occurs because the Mailbox Replication service does not check a certain flag when you move the mailbox.
Additionally, a move process for a mailbox that fails takes 30 seconds by default. When a move process for a mailbox fails, the Mailbox Replication service tries five more times to move the mailbox. Therefore, there is a 2.5 minute delay for each mailbox move
process when you move many mailboxes at the same time.
Currently, the workaround is to remove the “SoftDeleted” mailboxes manually after move the mailbox using the command you shared to us.
==========================================
1. List all disconnected mailboxes in a database and display DisconnectReason if its SoftDeleted or Disabled
Get-MailboxStatistics -Database "DB9" | Where-Object {$_.DisconnectDate -Notlike $NULL} | Format-Table DisplayName, DisconnectDate, MailboxGuid, DisconnectReason –Wrap
2. Remove a specific softdeleted mailbox
Remove-StoreMailbox -database “DB9” -identity “User Alias here” -MailboxState SoftDeleted
==========================================
And as I know, it has no impact on the mailbox usage, so we can ignore the warning message currently. Please rest assured that once we got more information about the issue, we will inform you ASAP.

How do I stop the annoying sound alerts when opening up a new production?

I'm sure I'm not the only one going through this so I thought I'd ask. I'm running FCSver and whenever I open up a new production or asset, I get this annoying "alert" sound effect (the Sosumi under system preferences), and I was wondering if anyone knew how to turn this off. I'll keep looking, and I'll post if I find anything, but if anyone knew the answer, or could point me to another post, I'd really appreciate it.
Thanks in advance.

I'm going to go out on a limb and guess that you've got a custom timecode field somewhere in your production and/or asset metadata group(s), right? And I'm going to further guess that this timecode field has dashes in it like this --:--:--:--, right? If so, try this: Click the arrow next to the timecode field and adjust the timecode so that it has a number (it doesn't matter what the number is as long it's not dashes - "00:00:00:00" is fine). Then Save this asset, close it and then reopen it and see if the beeping madness has vanished. Then, to make this change permanent for all of your new assets, make sure to edit the default value of any custom timecode fields to put zeros (or some other numeric default value) into them when a new asset is generated. If the asset still beeps when you open it, check the other metadata groups in your set to see if there isn't another empty timecode field lurking in the shadows.
Jason

How can I disable the event sound played when a new window is opened?

When Firefox starts, or when a new window is opened there is an annoying click.
How can I disable this?
The only way I have been able to stop it is by disabling all event sounds from the control panel but I'd rather just disable this particular sound.

No, it's Windows XP. Hmmm, I don't know! I only started noticing it recently and as far as I remember, the only new add on is NoScript. I found the event that was being triggered (Start Connection) and disabled the sound in Windows. So the problem is solved in that I don't have the annoying sound ... but don't know why it started and hope nothing sinister is going on.

Database logon failed when opening report with parameter values in CrystalReportViewer

Hi,
I designed 2 crystal reports: report A contains parameter fields and report B did not contain any parameter
I can open both reports in development site using CrystalReportViewer control. When I open the reports in testing site,
I can open report B but can't open report A. It display error message "Database logon failed". When I set EnableDatabaseLogonPrompt
to true and try to open the report A again, it shows database connection data which was created on report.
In addition, it is strange that it displays error "Database logon failed" when I click an item in group tree panel of the report B. This indicates that it can load data from database
in testing site but it connect to development database when clicking items in group tree panel
All reports connect to database using Windows Authenication. It use dynamic database connection at runtime
How to ensure the report always connect database using login data dynamically at runtime?
Below is my code about database connection:
string strServerName = null;
string strDatabaseName = null;
ReportDocument rptDoc = new ReportDocument();
rptDoc.Load(strFilePath);
ConnectionInfo connInfo = new ConnectionInfo();
TableLogOnInfo logonInfo;
for (int i = 0; i < rptDoc.Database.Tables.Count; i++)
logonInfo = rptDoc.Database.Tables[i].LogOnInfo;
ReportHelper.GetReportConnection(ref strServerName, ref strDatabaseName, strSystemType);
logonInfo.ConnectionInfo.ServerName = strServerName;
logonInfo.ConnectionInfo.DatabaseName = strDatabaseName;
logonInfo.ConnectionInfo.IntegratedSecurity = true;
rptDoc.Database.Tables[i].ApplyLogOnInfo(logonInfo);
rptDoc.Database.Tables[i].Location = rptDoc.Database.Tables[i].Location.Substring(0, rptDoc.Database.Tables[i].Location.Length - 2);
crvViewer.ReportSource = rptDoc;
crvViewer.DataBind();
Development environment:
- SAP Crystal Reports 2013 Support Pack 1
- Visual Studio Professional 2012
- .NET Framework 3.5
- DDL
CrystalDecisions.Shared (v 13.0.8.1216)
CrystalDecisions.Web (v 13.0.8.1216)
CrystalDecisions.CrystalReports.Engine (v 13.0.8.1216)
Database connection in crystal report:
- Database Type: OLEDB (ADO)
- Provider: SQLOLEDB
- Integrated Security: True
Thanks and Regards,
Tony

Hi Tonylck
Try to pass login info to crystal report dynamically as follows:
using System;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
namespace WindowsApplication1
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
ReportDocument cryRpt = new ReportDocument();
TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
ConnectionInfo crConnectionInfo = new ConnectionInfo();
Tables CrTables ;
cryRpt.Load("PUT CRYSTAL REPORT PATH HERE\CrystalReport1.rpt");
crConnectionInfo.ServerName = "YOUR SERVER NAME";
crConnectionInfo.DatabaseName = "YOUR DATABASE NAME";
crConnectionInfo.UserID = "YOUR DATABASE USERNAME";
crConnectionInfo.Password = "YOUR DATABASE PASSWORD";
CrTables = cryRpt.Database.Tables ;
foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
crtableLogoninfo = CrTable.LogOnInfo;
crtableLogoninfo.ConnectionInfo = crConnectionInfo;
CrTable.ApplyLogOnInfo(crtableLogoninfo);
crystalReportViewer1.ReportSource = cryRpt;
crystalReportViewer1.Refresh();
Ref
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-dynamic-login.htm
Mark as answer if you find it useful
Shridhar J Joshi Thanks a lot

How do I forces FF 23 to open maximized, not full screen, but maximized, both on start up and when opening new windows?

Firefox 23 does not open maximized nor does it open new windows maximized. As such I have to manually maximize each window.
Run is set to maximized in the shortcut properties, yet it still opens in a normal or less than normal size window.
Older versions open maximized with no problem. I have Profile manager configured so that I can run multiple versions at the same time and everything opens maximized except FF 23.
is there some setting in the about:config interface or is this a genuine BUG in the latest version? Any help would be appreciated greatly.
Also can you tell me how to modify the title bar text/icon/etc as well as where to find the icon or portable network graphic (png) file for the main-window.ico or direct me to appropriate knowledge base articles for modifying both.

My localstore.rdf file was fine. The problem was caused by two plug-ins that Mozilla shows as being compatible with Firefox 23, when in fact they both cause undesired side effects.
Maybe the employees of Mozilla should actually test plug-ins before they allow them to be available for download or worse yet, recommend them.
And if any of the in-house developers had a clue they would stop removing old lines of code from Mozilla products so that new versions of Firefox would still be compatible with older plug-ins and extensions people would still like to use.
I had to remove recommended extensions and copy code from older versions of FF and NS and modify settings in about:config to allow older extensions to work to correct the problems and get Firefox to work the way I need it to. All in all I have over forty hours invested in modding FF at this point just to have it function the way it used to.
Unfortunately, since I still can't get buttons designed to open .URL links from the toolbar to work as they did in the past I have a feeling I'll be returning to older code sources to find more answers.
Lucky for me that I have every browser going back to NCSA Mosaic available to me, so every bit of code from the present till back before Mozilla existed is include in my knowledge base. It's a shame Mozilla doesn't keep such a reference available for it's users or apparently it's in house developers and staff.
Maybe I'll even re-enable the splash screen for Firefox since the only available plug-in for that doesn't appear to work with Version 23 either, even though once again the compatibility adviser says it does
It's truly sad that the result of Marc Andreessen's and James Clark's work and Netscape in general became the spawning Mozilla. What used to be a great browser and an acceptable replacement for Netscape, has become a joke. So much for all the hard work and effort made by Dave Hyatt and Blake Ross as well.
I guess that's what one should expect from the developers that are a part of generations X, Y, and Me. The attitudes associated with those generations show in the lack of thought, consideration, and ingenuity that have been a part the last several versions of FF, not to mention, the copying of features from Chrome.
When the only original idea to come out of Mozilla of late is to remove or disable features people have used and counted on for decades, the I don't care, I don't know, and me, me, me attitudes of so many from the aforementioned generations is truly evident in the last twenty incarnations of Firefox. Not to mention the attitudes and unhelpful nature of the responses users encounter when asking for help.

After updating to latest firefox computer on internet running slower,taking longer to go to links and sites.also if i click on an email link the link keeps refreshing as mailto and wont stop opening new tabs very quickly,have to shut down to stop it.

since installing latest update,when using internet,email everything has slowed down and is taking long to go to websites to upload pictures to emails.
also when i click on an email link to send email the tab bar keeps refreshing and opening a new tab very quickly all i can read cos its going so fast is mailto this has happened several times on various websites,i clicked on a email us link on grangerhertzog.com yesterday and it did it.

You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
*https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows

When opening new tab, how to make me able to type in the adress bar directly without clicking on it? -- (about:config reset and add-on doesn't work)

Hi all,
Need a help relating New Tab on Mozilla.
I want to be able to directly type in the address bar everytime I open a new tab in Mozilla, without clicking anything. To be clearer, it means that everytime I open the new tab, the blinking cursor is already on the address bar.
What's happening right now is everytime I open new tab, the cursor is not placed anywhere--not on the search bar on the page, not on the address bar. I should put the cursor somewhere to do something.
I tried using the about:config reset (1) and installing custom new tab (2), but both do not work.
When I tried the about:config reset the Reset button is not highlighted (I assume it means it's default already), and the Custom New Tab doesn't yield in different result.
What confuse me is 2 days ago my Mozilla works just fine. Everytime I opened a new tab, the blinking cursor was on the address bar and I was able to type directly.
Thank you and appreciate the help!!
Note:
(1) about:config reset:
- Type about:config into the address bar and press Enter.
- To bypass the warning, press the big button labeled "I'll be careful, I promise!".
- In the search box, paste browser.newtab.url
- In the search results, right-click browser.newtab.url and choose Reset.
(2) Custom Add On reset:
- Install Custom New Tab. = https://addons.mozilla.org/firefox/addon/custom-new-tab/
- Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
- Next to Custom New Tab, click the Options button.
- Set whatever page you want to open in each new tab (about:newtab is the default; about:home is the default home page), and make sure "Place focus in URL bar" is not checked.

''philipp [[#answer-669209|said]]''
<blockquote>
ok, as a follow up i'd recommend disabling half of the addons & restarting the browser - if the problem continues disable the other half & continue until you've narrowed it down to the culprit...
</blockquote>
Hi Philipp,
I read the link you copied on the first post and also tried your recommendation above. None seem to work. Even if I disable all add-ons, the problem still persists.
One other info, this problem seem to appear after I installed several program yesterday. These programs apparently installed other programs that set my homepage and main search engine to a particular website. But I installed all of these programs already. Would that be a cause of the problem?
Thanks.

Sound fails when opening new sound "sources" quickly after one another

Similar Messages

Maybe you are looking for