Sound for F. left and F. Right both coming from left chan

i just installed my new X-fi Xtremegamer and when i test? my speakers through the creative console the test sounds for both front channels come out of the the left channel so when it says "front left, front right" both come out of the left spkr. i've tested the speakers on acouple different things and they work fine (logitech 5500's) i emailed support but i figured i might get?a quicker answer on here.thanks for any help you can give me?

Did you ever fix this problem? I have the exact same thing happening to my sound.
All the sound comes from the left in stereo sound. I plugged the green stereo analog speakers into the other pin the blackone for 4. setting on my SBLi've24 allthe others play fron t left back left and back right but the front right is so soft like a whisper.
So the speakers work. Im running a Xp mediaedition system. It happened after an apparent sound conflict that made an electronic popping sound which got progressi'vely worse until i figured out how to reset the car d in the Bios level. I have done evrything but reformat the hard dri've All tests say the hardware is working but still no front right channel. Help please

Similar Messages

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

Did you try different headphones!?
If it's sounding the same thing on different headphones then you might have changed the Left-Right balance
Have a look at Settings -> General -> Accessibility
There's a slider for L-R
If it's in the center then the headphone through which you're facing the problem might be damaged, try twisting the headphone wire of the speaker of the headphone (left or right) where you are encountering less volume.
If it's sounding altogether same on all the circumstances, the headphone jack might be damaged. Get your phone to the Apple Store and book an appointment
Try these steps and it will solve your question

Swipe left and swipe right not 'sticky' enough in DPS

I've found that when using the Swipe left and Swipe right function in tandem with DPS, the swiping action swipes away from the page. Any way to make the action 'stickier' so that it actually does what the action is set up to do and not swipe away from the page?
Thanks

Thanks for your replies Elaine and Neil. I'm referring to the 'swipeleft' and 'swiperight' actions within Edge. I'm attaching a screenshot (swipeleft and swiperight at bottom of list). The deal is...when I set up a button in Edge to swipe left or swipe right, my finger doesn't seem to 'catch' the button which cause the whole page in the app to swipe.
I was wondering if there is any js that can be written into Edge to help this.
Thanks,
Ian

One sound for incomming email, and another for sms

Hi There
I got my Z1 two days ago and is beginning to get use to it. (very nice phone)
However
There are one thing i miss from my iPhone and that is different notification sounds
Is it possible to use a sound for SMS/MMS and another for email and another other things?
Regards
Michael
Solved!
Go to Solution.

You can have diffenerent SMS tones to other notifications without extra apps.
To change just the SMS tone goto the SMS (messaging) app, press the 3 dots in the top right and select settings. Select the Notification Tone menu item to change the message tone.
You can change the other notifications tone by going to the Settings icon in the main menu and going to Notifications within Sounds.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

Command-delete, command-left and command-right not working as expected

On a Mac (in my case OS X 10.6.8) when entering text into a text-field or text-box 'command-delete' in any other application deletes everything between the cursor and the beginning of the current line. I'm using Firefox 10.0.1 and this does not work.
Also, in certain rich text editors such as Gmail's compose mail text-box 'command-left' and 'command-right' which would usually jump to the respective beginning or end of the current line doesn't seem to work.

Try:
Create Table ImportLog
( recid int,
grouploadid int,
groupid int,
tablename varchar(128),
note varchar(500)
Insert Into ImportLog
Values
(1,216,1,'tableb','noteb'),
(2,217,1,'tablea','notea'),
(3,217,2,'tableb','noteb'),
(4,217,1,'tablea','notea'),
(5,230,1,'tableb','noteb'),
(6,244,1,'tablea','notea'),
(7,244,2,'tableb','noteb'),
(8,244,3,'tablec','notec'),
(9,217,3,'tabled','noted')
select r1.RecID, r1.GroupLoadID, r1.groupid, r1.tablename, r1.note,
r2.RecID, r2.GroupLoadID, r2.groupid, r2.tablename, r2.note
from ImportLog r1
full join
(select RecID, GroupLoadID, groupid, tablename, note
from ImportLog
where GroupLoadID = '217'
) r2
on r1.TableName = r2.TableName and r1.Note = r2.Note and r1.Groupid = r2.Groupid
where r1.GroupLoadID = '244'
order by 1
GO
DROP Table ImportLog
GO
RecID GroupLoadID groupid tablename note RecID GroupLoadID groupid tablename note
6 244 1 tablea notea 2 217 1 tablea notea
6 244 1 tablea notea 4 217 1 tablea notea
7 244 2 tableb noteb 3 217 2 tableb noteb
8 244 3 tablec notec NULL NULL NULL NULL NULL
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

TS1702 I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what wrong i

I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what's wrong as far as I know everything is up to date on the phone it is running slow please help thanx!

I figured out what was going on the app had miss represented how much space it would take it had said it was 1.2g's however it was really 1.9g's which was all I had left on the phone I downloaded it to my computer first from the apps store then was able to see this. At that point I was able to rearrange some memory to accomadate it's size thanx for the help.
Mick

My ipod wont update any apps, it says something about storage managment but i have 4 gigs left and all of my iclous storage left. Is their ayway to fix this

my app store wont let me update any apps when i click the update all button it doesnt do anything and eventually says i need to manage my storage, i have 4.4 gigs left and all of my icloud storage left and i just deleted 5 app hoping it would make room but it didnt work. is there something that happened to itouch 3rd gen during th ios5 update or something? please let me know if there is anything i can do

it says something about storage management
Try these support articles...
iCloud: Managing your iCloud storage
iCloud: Purchasing iCloud Storage and Billing

HT2589 ?Frustrated, unable to discontinue Hulu Plus account that i took complimentary for one month and now can't stop from automatic renewals. Easy to sign up; impossible to cancel. Misrepresentation in marketing?

Frustrated, unable to discontinue Hulu Plus account that i took on a complimentary basis for one month, and now can't stop from automatic renewals. Easy to sign up; impossible to cancel. Misrepresentation in marketing?

http://www.hulu.com/support/article/203239

I can't get any sound from ITunes. The computer's internal speakers are fine (they play utube sound, for example). And the sound bar on itunes is all the way to the right. Still no sound from the music library. Any insights?

I can't get any sound from my ITunes library. The IMac is set to internal speakers, the volume bar on ITunes itself is all the way to the right, there seems to be no problem with the speakers themselves (they play sound from internet videos, for example), but I can't play music from the ITunes library on the IMac. Please help!

Is it possible that you have iTunes set to send audio through AirPlay to an AirPort Express, Apple TV, or other AirPlay device (which is itself not turned up so you can hear it)?

TS1314 I HAVE GOT THE NEW ipad FOR ONLY 2 DAYS, I HAVE MANAGED TO DO EVERYTHING EXCEPT THE TWO MENTIONED THINGS (1. TO SEND AT LEAST OLD OR NEW PHOTOS DIRECTLY FROM MY NEW ipad TO FaceBook and videos to both directly from my new ipad to FaceBook and YouT

FORGOTEEN......... VERY SORRY ABOUT IT BECAUSE THE NEW iPad is BEYOND FROM MY ANY EXPECTATIONS......... IT IS THE FIRST TIME I TRY (USE) AN APPLE PRODUCT............ I AM REALLY VERY IMPRESSED FROM THAT UNIMAGINABLE PRODUCT!!! APART THE TWO MENTIONED PROBLEMS (EVERYTHIN NEW TAKES TIME TO BE LEARNT) IT IS REALLY THE MOST PERFECT WEB TOOL I HAVE EVER USED SO FAR (I DO NOT WORK FOR THE APPLE AND I AM NOT PAID FOR A RELEVANT ADVERTISMENT, NEITHER) - PLEASE SHOW ME IN A SIMPLE WAY (I AM NOT FAMILIAR WITH THOSE MACHINES BUT THEY ARE VERY USEFULL TO ALL OF US NOWADAYS), HOW TO POST DIRECTLY AN IMAGE FROM MY NEW ipad to FaceBook and the second one, in which way I CAN COPY - SYNC MY HD PHOTOS TO MY NEW ipad (I DID SO WITH MY ALL MY EMAIL ADDRESSES/CONSTACTS FROM THE MS OUTLOOK TO MY NEW iPAD DIRECTLY. I HOPE THERE WILL BE NO PROBLEMS - DIFFICULTIES TO PLACE VIDEOS DIRECTLY FROM MY NEW ipad to BOTH FACEBOOK AND YOUTUBE, THANS FOR YOUR UNDERSTANDING AND YOUR EFFORTS TO HELP ME, GREETING TO ALL OF YOUR FROM ATHENS, GREECE, ENJOY WITH THE NEW ipad, IT IS A FANSTASTIC WEB ETC TOOL
CONSTANTINOS SPYROPOULOS
ATHENS, GREECE

Have you read my reply to your other thread : https://discussions.apple.com/message/18373620#18373620 ?
For Facebook try one of the facebook apps e.g. the 'official' Facebook app
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes, and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page : http://support.apple.com/kb/HT4236 . You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - not including photos in a subsequent sync is how you delete them from the iPad.
(And don't type in capitals, it is considered SHOUTING so people are less likely to reply, and it makes it harder to read)

I have sound for music, tv, and movies. So why don't I have sound in my apps?

No sound in my apps.

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

If I have audio coming from left channel. How do I make same audio Left and Right?

Hi there,
I've recorded some footage with a mono mic and it recorded the audio on the left channel of the audio. In FCP. I placed this audio clip as a part of a multi-cam clip but the sound is only coming out the left. Is there a way to set this audio to mono or to make them play the same levels through the left and right channels?
Thanks,
Caleb

Wow! 30 Seconds later, I figured it out. LOL
Under Inspector for audio, you just click on channel configuration, click on channel and use "Dual Mono" mode. Thanks Caleb!

Inspire 5200 5.1 sound from both R & L rear speakers coming from left rear speaker only

I have done a complete sound system check, every thing check out good. From the rear speakers I am only getting sound from left rear. When i do a speaker check, when right rear speaker lites, sound comes from left rear. when left rear speaker lites sound also comes from left rear speaker.

creek,
You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
http://forums.americas.creative.com/...essage.id=2563
Jason

In Final Cut Pro X 10.1.1 I'm trying to separate left and right stereo tracks to delete left and pan right to centre. I cannot find a way to do this.

I record in stereo with a 10KHz tone down the left channel to defeat AGC on my camera and mic feed into the right channel. When I edit, I want to mute/delete the left channel and pan the right into the centre, to leave me with mono audio across both left and right. I could do this easily in FCP 6 but can find no way to do it in FCP X. I'm using the same source files. When I choose Dual Mono mode in the Audio Inspector, it mixes left and right and pushes the combined signal into both channels, giving me a mix of 10KHZ tone and audio in both left and right. Stereo mode shows me the two channels correctly with one driven hard (the tone) and the other at good voice levels. I just want to kill the left channel and pan the right to centre.
I'm converting original TOD files using MPEG Streamclip before import and definitely keeping audio as stereo.
This is driving me nuts! It should be simple and is in FCP 6. Any help greatly appreciated.
Stereo Setting
Mono Setting

Mb - If you're using FCPX 10.1.1 and Mavericks, make certain you've downloaded the most current Sony XDCAM FCPX plugin from sonycreativesortware.com unless you're using an older version of FCPX and then you'd need the previous XDCAM plugin.
You shouldn't see 8 mono tracks. There are import settings in /fCPX that you can check and I don't ask FCPX to analyze my media or seperate mono or combine stereo, etc. I like to have everything come in as it is, especially because I know what I've done with every channel, etc.
What I wrote to Ian is what I'd tell you - so please take a look at how you can make a "stereo" track that is actually two mono tracks, mono. Once you do that you can address each mono channel by itself since it needs different volume, compression, and EQ than other channels.
There are ethernet, USB, and firewire controllers that work in FCPX, but that's not the typical workflow because generally if you're getting into any amount of post audio sweetening beyond basic "staples" audio treatment, you would instead use "Roles" to export your audio to Logic or Pro Tools and do you work in those applications and then cut the final product back into your FCPX project. In Logic or Pro Tools is where you might use a controller.
In terms of automating levels, I'm not positive I know what you mean. Compressor is a nice internal Logic plugin that kind of automates levels in a way but its about compressing peaks at a threshold that you set and at a ratio of compression. So I may not understand what other automation is available unless you've exported you tracks to Logic or Pro Tools.

Sound for F. left and F. Right both coming from left chan

Similar Messages

Maybe you are looking for