Sound for the cd player not working
I've just about worn out my resources on this one.
The OS is 98, the motherboard is msi 648 max, I downloaded the sound drivers loaded them onto the computer. Sound works on everything except the cd player
I checked the regedit, and everything seems normal there. I even uninstalled the drivers and reinstalled them, uninstalled and reinstalled the cd player, I even downloaded and put on directX 8
am I missing something and before anyone can mention yes I checked for conflicts, nothing is too obvious.
and I can't change the IRQ mainly because the sound card is onboard the motherboard
theres no analog cable between the mobo and cd rom
dont need it expand the drive in device manager and tick the box for digital out
ummmmmmmmmmmmmm where exactely is the check for that? I can't find it
Similar Messages
-
What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.
You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution. -
I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4
App Store->Purchased
iTunes->Purchased->Download All -
Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?
When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it. Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off. If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out. Hope this helps you out.
-
Sorting for the procedure is not working
can you help why the sorting is not working here.I am running the below procedure to sort asc and desc and when I do sort in descending order by a different column it gives me a different rows sorted in desc order. what i
want the proecdure to do it to sort the recordset in asc and desc order without changing the selected rows
SQL> exec trnsportitems.gettrnsportitems(1,10,'itemnumber desc', :n, :c);
PL/SQL procedure successfully completed.
SQL> print c;
ITEMNUMBER R IDESCR IDESCRL IUNI IS I ITEM
2011.601/00002 1 TUNNEL CONSTRUCTION LAYOUT STAKING TUNNEL CONSTRUCTION LAYOUT STAKING LS 0
2011.601/00003 2 CONSTRUCTION SURVEYING CONSTRUCTION SURVEYING LS 05 N 2011601/00003
2011.601/00010 3 VIBRATION MONITORING VIBRATION MONITORING LS 05 N 2011601/00010
2011.601/00020 4 REVISED BRIDGE PLANS REVISED BRIDGE PLANS LS 05 N 2011601/00020
2011.601/00040 5 DESIGN DESIGN LS 05 N 2011601/00040
2011.601/00050 6 DESIGN AND CONSTRUCT DESIGN AND CONSTRUCT LS 05 N 2011601/00050
2011.601/08010 7 SUPPLEMENTAL DESCRIPTION SUPPLEMENTAL DESCRIPTION LS 05 N 2011601/08010
2011.601/08011 8 SUPPLEMENTAL DESCRIPTION SUPPLEMENTAL DESCRIPTION LS 05 N 2011601/08011
2011.601/08012 9 SUPPLEMENTAL DESCRIPTION SUPPLEMENTAL DESCRIPTION LS 05 N 2011601/08012
2011.601/08013 10 SUPPLEMENTAL DESCRIPTION SUPPLEMENTAL DESCRIPTION LS 05 N 2011601
10 rows selected.
SQL>
SQL> exec trnsportitems.gettrnsportitems(1,10,'idescr DESC', :n, :c);
PL/SQL procedure successfully completed.
SQL> print c;
ITEMNUMBER R IDESCR IDESCRL IUNI IS I ITEM
2563.613/00040 1 YELLOW TUBE DELINEATORS YELLOW TUBE DELINEATORS UDAY 05 N 2563613/00040
2563.602/00100 2 YELLOW TUBE DELINEATOR YELLOW TUBE DELINEATOR EACH 05 N 2563602/00100
2565.602/00940 3 YELLOW LED INDICATION YELLOW LED INDICATION EACH 05 N 2565602/00940
2502.602/00040 4 YARD DRAIN YARD DRAIN EACH 05 N 2502602/00040
2411.601/00030 5 WYE STRUCTURE WYE STRUCTURE LS 05 N 2411601/00030
2557.603/00041 6 WOVEN WIRE FENCE WOVEN WIRE FENCE L F 05 N 2557603/00041
2557.603/00043 7 WOVEN WIRE WOVEN WIRE L F 05 N 2557603/00043
2563.613/00615 8 WORK ZONE SPEED LIMIT SIGN WORK ZONE SPEED LIMIT SIGN UDAY 05 N 2563613/00
2563.613/00610 9 WORK ZONE SPEED LIMIT WORK ZONE SPEED LIMIT UDAY 05 N 2563613/00610
2557.603/00035 10 WOODEN FENCE WOODEN FENCE L F 05 N 2557603/00035
10 rows selected.Hi,
user13258760 wrote:
can you help why the sorting is not working here.I am running the below procedure to sort asc and desc and when I do sort in descending order by a different column it gives me a different rows sorted in desc order. what i
want the proecdure to do it to sort the recordset in asc and desc order without changing the selected rowsAs it is written now, the argument insortexp has nothing to do with the order of the rows. It is used only in computing column r, and column r is used only in the WHERE clause.
Are you really saying you don't want a WHERE clause at all in the main query: that you always want the cursor to contain all rows from itemlist that meet the 3 hard-coded conditions:
... WHERE item '2999509/00001' -- Did you mean != here?
AND iobselet = 'N'
AND ispecyr = '05'?
If so, change the main query WHERE clause:
WHERE r BETWEEN instartrowindex AND inendrowindexinto an ORDER BY clause:
ORDER BY rBy the way, you might want to make insortexp case-insensitive.
In your example, you're calling the procedure with all small letters in insortexp:
user13258760 wrote:
SQL> exec trnsportitems.gettrnsportitems(1,10,'itemnumber desc', :n, :c);but the output is coming in ASC ending order:
... ORDER BY
DECODE (insortexp, 'itemnumber ASC', item) ASC,
DECODE (insortexp, 'itemnumber DESC', item) DESC, -- capital 'DESC' won't match small 'desc'
DECODE (insortexp, 'idescr ASC', idescr) ASC,
DECODE (insortexp, 'idescr DESC', idescr) DESC,
DECODE (insortexp, 'idescrl ASC', idescrl) ASC,
DECODE (insortexp, 'idescrl DESC', idescrl) DESC,
DECODE (insortexp, 'iunits ASC', iunits) ASC,
DECODE (insortexp, 'iunits DESC', iunits) DESC,
DECODE (insortexp, 'ispecyr ASC', ispecyr) ASC,
DECODE (insortexp, 'ispecyr DESC', ispecyr) DESc,
SUBSTR (item, 1, 4) || '.' || SUBSTR (item, 5) -- This is the only non-NULL ORDER BY expression Why not declare a local variable:
sortexp VARCHAR2 (20) := LOWER (insortexp);and use that variable instead of the raw argument in the query:
... DECODE (sortexp, 'itemnumber asc', item) ASC,
DECODE (sortexp, 'itemnumber desc', item) DESC, ...Also, this site doesn't like to display the <> operator, even inside \ tags. When posting here, always use the other inequality operator, !=
Edited by: Frank Kulash on Jun 15, 2010 3:25 PM -
Dreamweaver Widget Browser for Html5 video player not working
Html5 video player (kalturaPlayer) not working on server. It works fine in Dreamweaver Live View. Need to get this resolved soon for client's web page.
Here is my code:
<figure> <div>
<video width="640" height="360" poster="NewFiles/images.tdrbcf/home/2012/denise4video2.jpg" duration="2:04" preload="auto" >
<source type="video/h264"> <source src="NewFiles/images.tdrbcf/video/liv-fab-well.mp4" width="640" height="360" />
<source type="video/webm"> <source src="NewFiles/images.tdrbcf/video/liv-fab-well.webm" width="640" height="360" />
<source type="video/ogg" >>
<source src="NewFiles/images.tdrbcf/video/liv-fab-well.ogv" width="640" height="360" />
</video>
</div></figure>
I'm not as familiar with editing the script ... so I left it alone. Could there be an error there, do the video player files need to be in a particular location and are there some servers that do not support the kalturaPlayer?Html5 video player (kalturaPlayer) not working on server. It works fine in Dreamweaver Live View. Need to get this resolved soon for client's web page.
Here is my code:
<figure> <div>
<video width="640" height="360" poster="NewFiles/images.tdrbcf/home/2012/denise4video2.jpg" duration="2:04" preload="auto" >
<source type="video/h264"> <source src="NewFiles/images.tdrbcf/video/liv-fab-well.mp4" width="640" height="360" />
<source type="video/webm"> <source src="NewFiles/images.tdrbcf/video/liv-fab-well.webm" width="640" height="360" />
<source type="video/ogg" >>
<source src="NewFiles/images.tdrbcf/video/liv-fab-well.ogv" width="640" height="360" />
</video>
</div></figure>
I'm not as familiar with editing the script ... so I left it alone. Could there be an error there, do the video player files need to be in a particular location and are there some servers that do not support the kalturaPlayer? -
Downloaded drivers for the MS6570 do not WORK - HELP!
Hello,
I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php
and from:
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
I appreciate any info.I appreciate everyone's reply....
Here is what I have done.
I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
Thanks for any help again. -
My sound for my iPad2 is not working. Why is that, please help?
I had the ipad 2 for sometime, crazy as it sounds but I've never used the headphone port. The day I go to used my headphones lost all sound to iPad, crazy right? I tried some self troubleshooting like check the sound in settings, resetting, and even restoring it to factory setting. Please help me?
Do you get sound without the headphones?
See here, articulacy the latter part. http://support.apple.com/kb/HT4085 -
Approver for the application role not working out
Hi,
I have created a role with type application and Approver A, then created a business role with the Approver B and included application role into the business role.
When i assign this business role to a user the only request for approval goes to Approver B and after approval the both application and business roles are assigned. Strangely it seem to skip the Approver A. I did even remove the approver in business role, leaving only approver in application role, still same result - it skips Approver A.
I'm using IDM 8.0.0.1, any ideas why it would skip the approver in the included role?
Thanks!Thanks for the quick reply. I've tried optional with approval and here is what I found.
It seems I need a combination of the two. My end goal is to have a second level approval, one group would be responsible for approving the business role and the system owners would be responsible for approving the nested application roles. When a user requests the business role, they must have approvals for the business role and all of the nested application roles for their request to be completed.
If the app. roles are required, the workflow automatically incorporate the nested appl. roles in the request but does not require approval for them. If they are conditional with approval, the user would have to submit a second request to get all of the nested application roles. It looks like I need a combination of the two, required with approval.
I need it to behave like it does when you have a role with approver that includes resources with an approver. The role and resources must all be approved before the request can be completed successfully.
I'm trying to see if this is possible through the GUI before I customize the workflow. -
Queries based on Master data for the particular periods not working
Hi,
My Queries are based on master data and for 2007 we did not have customer groups define hence for the historical also we would like to display the customer groups hence we are reproting based on master data. But when iam executing my reprots for each and every month for the 2007 , i can able to execute the reprot properly but same when iam giving the values in ranges with the help of input filed ( calender month -interval) its taking hours but unable to retrieve the data for the 6 months at a time even if iam restricting the values in the queries still the problem is same...
Can anyone has an idea what would be the problem .. its only for 6 months
ThanksHi
Master data report consumes much time. try to see the Query Statistics and make the performance tuning.
Recheck your data flow for routines at TRules/upRules level.
Recheck on the Query designer for formula/ Cmod Variables.
The report fetching time even depends on the NO.of records too.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06dcd70-41a8-2b10-9f8f-dc5c68769753
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6009e125-e9a3-2a10-c6a9-e1483dfa2e1b
Hope ithelps -
TS1702 How i can get the refund for the apps that not working.
I bought apps name "Mobile Admin". It's not working and I try to check on their web site it not avalible anymore. www.appmobile.biz
Send an email to iTunes support asking if they will refund your purchase.
-
Sound on the timeline does not work
When I play sound on the timeline using the return key I get an ear pircing loud sound. I just updated to the latest Fash cc from the cloud manager. I'm also running OS 10.9 (Maveric)
Is this an isolated problem or have other users experienced the same thing? and is there a solution now?Please refer to http://forums.adobe.com/thread/1323550?tstart=0
-
I Hit the download link, get the permission windows, and the flashplayer installer window comes up, but doesn't do anything. i left it up all day when i went to work, come home 12 hours later and it was still just sitting there not installing. Is there a fix for this? i have looked everywhere and nothing that i have found has worked. even the suggestions on the adobe help page doesn't work..
And you used the offline installers from the link that Andy posted:
Flash Player for Internet Exporer - ActiveX
Flash Player for Firefox - NPAPI
If yes, please post the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash -
i want to play my ipad on through my tv and receiver to get surround sound (not using the tv speakers) I connect the htmi cable to my tv and ipad do i need more cable to get my surround sound to play the audio? i thought hdmi did it all.
if you have a 6th or 7th gen classic, you'll have a have the video out cable from apple. only the 5th gen will play with a generic 3 connector video out cable.
-
I cannot use the scroll, cannot change tabs, autocomplete for the URLs does not work
cannot use scroll, cannot change tabs, cannot use autocomplete in the URL tab. this was working
== This happened ==
A few times a weekDo you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
Maybe you are looking for
-
Getting error in IC agent business role while loading components.
The user has been allowed and access to all business role.user are using all business roles but when user click on the IC agent business role the following error arise. Cannot display view CRMCMP_BPIDENT/BuPaMultipleLayoutVS of UI Component CRMCMP_BP
-
I have a Flash Sample to rotate images and text but I not find a way to display special characters
Hello everyone. I bought a very nice Flash application that rotate images, and text of any color and size. It use an XML input file. I've posted here, a complete copy, so any of you can download, view and use it freely. I would appreciate if any of y
-
Assigning a Value to a Base Table BLock Field
hi, I have a form in which a block is a base table block . i need to change the value of a field. currently it shows the value of a field from the Table on which the block is based . I need to change the value of that field to display some other valu
-
Problem with customer exit variable in BeX Query
Hi All, We have created a customer exit variable in a query and populated with few patterns in customer exit. My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not wo
-
How to skip first 5 lines from a txt file when using sql*loader
Hi, I have a txt file that contains header info tat i dont need. how can i skip those line when importing the file to my database? Cheers