Sound for video not working on iPod

When i convert the video files from my computer into iPod format, they do it. However, I transfer the video to my iPod and only see the video; there is no sound to the video even though it plays both on my iTunes and computer...what might be the problem?

just revising the question...the video does show up on my iPod, there is just no sound with the video. Guess I'm just trying to figure out if I did something wrong or if there is a fix to where I can see AND hear the video versus just watching it. The volume works for my songs, it is not locked and I try to raise and lower volume when playing the videos but there is no sound at all.

Similar Messages

Youtube videos not working with ipod

This problem has always happened to me. But yesterday I had enough
It was one of those peaceful days. I decided to stay in my room
To watch x-men evolution on my iPod (how cool is that) but anyway
Not for long. I got to watch all the way up to season 1 episode 7
After that episodes 8,9,10,11 and 13 were not working
I was using YouTube through safari and usually
A play button is over each video. You push play and
There it is. But this time the play button had a slash in the middle
Like those no smoking symbols. So I go to the YouTube app and
It's technically the same problem "this video cannot be played"
So I skipped most of season 1 and went to season 2 (on safari)
Same **** problem the play symbol with a slash.
Nothing worked I closed out safari and tried
Playing these videos later and they still didn't work
And also this is not the only pro len with me 2nd gen
iPod touch. Sometimes it takes a video forever to load or it just won't load. And also when the video is streaming for
SoMe reason it stops streaming.
Also I know it's not a format or encode problem because
I've had this problem with other videos that I used to watch all the time
Somebody help

If those videos are Flash encoded, then you won't be watching them on your touch. The only way to get YouTube with the properly encoded videos is to use the YouTube app.
And no, Flash is not available for the touch or the iPhone is not likely to be anytime soon.

Sound and videos not working

Hello,
I bought my HP laptop almost a year ago for my first year of university and recently the sound has been stopping and starting.
The sound sometimes works fine, but other times it works to begin with but then within the space of a few minutes it stops and won't work again until I shut my laptop off and turn it back on again.
When the sound won't work, neither will any youtube videos or iTunes songs, they stay on 00:00 and don't play at all.
I've tried all the help given on this link: http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c03257712#N432 but to no help. My computer is all updated, the speakers say they have no new updates, and all my anti virus software says my computer is protected and under no threat.
When doing all the stages on the link above, the Step 2 'change stystem sounds' part says that 'the device is being used by another application' when checking each individual speaker, even though I have nothing else running. So I am a little confused at what else could be running.
I have read a few of the help posts given for this type of problem and apparently deleting the audio speakers from device manager hasn't been very helpful for some people and I am wary of deleting things and making matters worse.
If someone could please get back to me to help I'd appreciate it. If not I'll have to go into PC World to get it fixed, as my laptop is still under warranty and should not be having problems after less than a year of use.
Thanks

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Sound.length is not working for Flex Mobile Project

Hi
i am working on Flash builder 4.6. I see sount.length is returning zero verytime. other sound object is working but sound.length is not working.
Any one facing such type of problem for sound file in Flash builder 4.6.
Thanks
Brij Kishor
Flash Builder App developer

Thanks for the response. I am using spark TextInput components as you can see in the code above. I've used these conrtols in other apps in FB 4.5 and have had no problems so it seems like something may be different in 4.6, or it's a bug.

IChat Video Not Working since PSP3 bought!!

Hi guys,
ichat video not working since I bought and installed a new Playstation 3. I have a BT HUB that connects wirelessly with the imac. I have BT Vision running from the HUB too via ethernet wall boost adapters. I had this problem with video when i installed the BT Vision. And turned out to be something to do with Application Sharing settings on the HUB. I resolved it by correctly sharing AIM TALK with my wireless imac. Now the same problem has arisen since the psp3 was put on. But even with all the things I've tried I am stuck as how to get the video up and running as before. The devices running off the hub include:
1. imac (wireless via Airport Extreme)
2. BT Vision via ethernet and wall adaptors
3. iPod touch via wireless
4. PSP3 via wireless plug and play
I have checked all the ip address for these devices and have enabled app sharing for the imac wireless to AIM TALK in BT HUB manager. I have also opened my firewalls; changed the port setting to 443 in ichat preferences; re-set the HUB/Router;
Is there anything else I can do or check? As I said it worked perfectly before the psp3 went onto the
network. Should i assign AIM TALK to the imac wireless or to some of the other devices? (though I think I've tried that too!!)
Help would be much appreciated as this is driving me to insanity, if I wasn't there already!!!!
Take care, and thanks in advance for your help.
Baz, Belfast, Northern Ireland, Europe!!

"speedtouch modem!"
Yes you do.
Thomson-Alcetel who make the Speedtouch range make this device for BT.
The Firmware is Thomson-Alcatels with BT Logo-ing.
This Ethernet 3 connection is probably internal.
Have you got System Preferences > Quicktime > Streaming set to 1.5Mbps ?
If not then do and restart iChat to see the new speed.
In Leopard the Automatic setting is read by iChat as 384K.
This may be allowing the PS3 to have too much of the bandwidth.
I or rather my son has a X-Box 360 which can be on-line when I video chat and it works for me, as it does when he uses his PlayStation 3
If the AIM talk setting uses the same port here as it is listed elsewhere then it has only opened/allowed port 5190.
This would have appeared to have been coincidental to any iChat use when you changed it.
Are you not using UPnP in this device ?
Which firmware is it up to ?
Anything above 6.2.2.6 should work.
Anything starting with 6 and containing letters is later.
In the .telephony section does it mention which port are open ?
9:00 PM Sunday; May 11, 2008

My iPhone 4S has no sound for videos.

My iPhone 4S has no sound for videos. Only videos though, and no matter the source. I can't hear my own videos I record, videos from YouTube, Facebook, Instagram etc. I'm operating on 7.0.2. No, it's not muted with the side button but I can't figure out why it's not working.

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Buletooth is not working in ipod touch 4g. When i want to connect my i pod touch with my friend ipod touch same 4g we can not able to connect.

Buletooth is not working in ipod touch 4g. When i want to connect my i pod touch with my friend ipod touch same 4g we can not able to connect.

The BT profiles on the iPod do not support direct iPod-to-iPod use. There are apps that support peer-to-peer gaming between iPods and maybe transfer like for photos. Also see:
iPhone, iPad, iPod touch: Supported Bluetooth profiles

NYT videos not working in Safari 5

NYT videos not working in Safari 5

Work fine for me - they are just normal Flash videos.
Make sure your Flash Player is up to date.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

My Nike sensor is not working in ipod touch

My Nike + Ipod sensor is not working in Ipod touch. I tab on it and it opens up saying walk around to activate the sensor, I walked couple of times, jogged, ran, but the sensor is not activating..Any settings to be changed or what should I do to get this work

I did try resetting the connection under Settings, also reset my i pod by restarting it, but it didnt work out. Apart from this, I have a 2nd gen Ipod for which I need a external sensor to check unlike the inbuild sensor in ipod touch. Any other option

My sound system is not working after my last updates on my imac,what shall i do to get fixed?

Hello any body who can help me out here?
My sound system is not working on my imac after the last updates,
WHAT SHALL I DO FOR????

apollos211,
You marked this as solved, so chances are no one else will respond.
You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
Also check in system preferences>sound >output and see what is selected there.
If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
All the best

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

Sound for video not working on iPod

Similar Messages

Maybe you are looking for