Sound from 1 out of 5 speak

I have a Audigy 2 ZS with a 5. Altec Lansing speaker setup and the problem I am having is I can hear audio on one out of fi've of my speakers (rear left) and very loud crackling noise from the others.
I get the same thing from all audio formats (mp3, wma, wav etc) and all media players
I have tested the speakers on another computer and they are fine
I have completely uninstalled and re installed the drivers to the latest version multiple times
I sometimes get different results when reinstalling but its always a combination of cracking noise and very low volume even with all the meters on max.
Any help would be very much appreciated

it means that for music purchased on the itunes music
store you can have the music purchased on 5 sepertate
computers. Go to the itunes dicsion boards to learn
more about this.
GFF
Thanks GFF... I'll check it out. HNY.

Similar Messages

How to output sound from Zen Neeon to speaker without using

how to output sound from Zen Neeon to speaker directly?
as far as i know, i can only play content in my mp3 player using speaker with usb cable connected to pc
i just wonder how i play using "play" button in mp3 player and the sound will output to speaker directly?
need extra line-in cable?

my speaker system is subwoofer,but i not very sure it's 2. system.
the cable from the speaker is slightly too big to connect to the player headphone jack. and no sound come out after i play.
why?

Intermittent beeping sound from my PC internal speaker. How to disable it?

I have a HP Pavilion 1070d PC. I get an intermittent beeping sound from my PC internal speaker. It seems to engage when the hard drive starts working when it's been down for a while. How do I disable the beeping sound?

Domgoh, welcome to the forum.
Normally, the beeps that come from a computer are BIOS beep codes. They are warnings that something is wrong with the computer. At the bottom of the page in the link that I provided are codes for different motherboards. Review them to see if this is what you are receiving.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. What is the solution?

When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. Due to this I cannot even use Siri, Voice message recorder or even Tom Cat applications. What is the solution?

http://support.apple.com/kb/TS1630

No sound comes out of my speaker but ok when on the phone the ipod ring tone any kind of tone not working but perfect with ear phones

hi no sounds come out of my speaker form i pod key tones dont work but when on phone can hear everthing and works perfect with ear phones
as any one had same problem

Clean the iPhone charging port with a clean dry toothbrush.

Only sound from my right internal speaker on my new hp stream X360 PC 11

hi, just opend my new HP Stream X360 PC 11 and it´s only sound from my right internal speaker. the system is updated and ive done the soundtest and the sound comes thru the right speaker even when i push the left speker test button.... softwere or back to the shop...

Were you able to contact Apple, about this issue, while under warranty?
If there is a hardware cause of the problem or other, they may fix it or
at least diagnose the underlying cause...
Your other post was changed into a new thread on its own, here:
•Popping sound from right MacBook Pro speaker
When posting in an old topic, your issue may not relate to the original
cause of the problem someone had a year ago with different hardware
and another build version of OS X.
Good luck & happy computing!

Cant hear sound from the long center speaker under the screen on pavilion dv6

can't heaar sound from the long center speaker under the screen on pavilion dv6

carlosherrera_1 wrote:
Look at p.12, items #2. I am talking about those speakers.
Hi,
Sorry I misunderstood, central (center) speaker is the one sit at the middle, we normally call Left, Right and Center speakers. Anyway, what is your speaker icon (bottom right corner) says ? Does it look like this ?
1. If NO, double click it & turn it ON
2. If YES, right click it, select "Playback devices" and turn it ON, it should look like this:
3. Otherwise, please post back
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT4528 Sound from the built-in speaker badly cracks and breaks

Hi, I need a help on trying to figure out what's wrong with my iPhone 4..
I've had my iPhone for about a year, without any major issue. But recently I noticed that the sound coming from the built-in speaker cracks and breaks to a point it barely makes any proper sound. The weird thing is that this happens only for alarm, text/phone ringtones, and during calls when I try to use the speaker.
At first I suspected it was the hardware issue, but when I play music it works just fine. I tried restoring the phone, but that didn't fix the problem.
I'm thinking about taking it to Apple store or Verizon, but my Apple warranty seems to have expired and I don't know what Verizon can do to help. I should still have the protection plan through Verizon, but it doesn't cover much.

f1ght4fun wrote:
Unfortunately, I'm from Cyprus, Europe and diffenrence in time + no Apple Reps here makes it quite hard. I was hoping these threads are also monitored or here might be somebody who knows how to help me.
Either way tnx 4 advice!
This is from the Apple Support Communities Use Agreement:
Apple involvement. Apple does not formally provide technical support on the Site. However, any information that is provided by Apple or Apple employees is offered on an “AS IS” basis without warranties of any kind.
Here is the link: https://discussions.apple.com/static/apple/tutorial/tou.html
Don't get discouraged so easily though, this question hasn't even been up for a full day yet. Give others time to see it

I just purchased a 6 and there is a static sound coming out of the speaker when it is idle. I have the sound on low and turned off and it still makes the static sound.

I just purchased a 128 Gig iPhone 6+. When I have the sound off and volume as low as possible, I get a static sound coming out of the speakers. It is distracting and annoying when I am in meetings, etc. Does anyone know what to do? Thanks in advance.

Couple of things you can try but it looks like you may have to take it in
1. Settings --> Cellular --> Change "Enable LTE" to just "Data" if available
2. Toggle your ringer off and on
3. Settings --> General --> Accessibility --> Toggle Noise reduction off and on
If none of the above works - consider taking it to Apple
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support

No sound from headphone or internal speaker

I have an iPad 4th gen, there is no sound from the internal speaker, nor from the headphone jack. I've swapped all parts in the ipad and another motherboard works, but this one is obviously stuck in some mode I can't really explain. When I volume up or down while on the home screen, it shows volume up and down fine, but I think it should show ringer up and down. I plugged in headphones, and unplugged them, and it gets stuck thinking headphones are plugged in, but there is no sound from the headphones. Youtube videos do not play, they appear to start playing but they ultimately just sit there and never play. Itunes store sample music does not play either. I click on the song I want to play a sample of and the play/pause effect of the sample graphic flashes and nothing happens, like I never hit play. I've tried airplay to my apple tv, and when I select apple tv from the bottom swipe up menu, it goes right back to the ipad, it will not try to air play. This is a very strange situation and I'd like any help I can get. I've reset all settings, upgraded ios to the latest, cleaned out the headphone port, swapped the main headphone/camera/mic/volume button cables with working ones, I've changed the internal speaker with a working speaker...I'm stuck.

Hi,
As you mentioned, the HDMI sound may take over sound, disable HDMI sound may help. Pleae try:
Right click the speaker icon
Select Playback devices
Right click HDMI sound and disable it
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Sound from only 2 front speak

I have an Audigy zs notebook soundcard with all of the drivers and downloads up to date. The problem im having is that the sound is only playing out of the two front speakers when i set the control center to a direct input and the effect to 6 channel direct. I have a logitech z-5500 speaker system. I know that if i change the effect the rear speakers will work, but i can't get true 5. surround unless the effect is set to 6 Ch direct.

Most likely because your source is stereo.

Only hear sound from one speaker

I have been going nuts trying to find help on this. There were some but not exactly the same. So here is my dilemma.
I am capturing miniDV footage from my camera (Sony DVR PC 330) and used a Sennheiser MKE 300 Shotgun Video Camera Mike to capture audio. Then I captured in into FCE and also Toast 6. Both only produced audio on the left side. Now I checked the speakers, used headset and it was the same. I listened to iTunes and audio from other sources and both speakers and headset worked fine on both sides. Only bringing in from my camera did the sound from only the left speaker. So it's my camera or external mic. Well, I checked that too and I listened to the tape with headsets and heard everything fine on both sides. So the tape has all the audio. So could it be that the firewire is bad? Or is there something I have overlooked. Last week I imported a CD into FCE and produced a CD of audio that was fine. So the program is not at fault I would think. Any ideas would be great.
iMac G5 Mac OS X (10.3.9)

Panning on audio . . . . .>
The panning is set all the way to the left and shows -1. But this is the default setting. As when you click the little red (x) it will go to the left. And I just opened another project that works fine and it is all the way left with -1. If I move that sequence it sound less full with not bass or something, it just isn't right. So not sure this is the solution. And now I have to go out of town for a few days so will look forward to any other thoughts you all have when I return. Keep thinking
Jon

HT204404 i just restored my iphone 3gs and now there is no sound from the speaker. what do i have to do to make that work

i want to use my iphone 3gs and i had restored it and successful with that other than there is no more speaker sounds, what do i need to do to get that back

Hey BurnOff.int,
Welcome to Apple Support Communities, and thanks for the question. There's an article that goes over troubleshooting steps if your can't hear sound from your iPhone 3GS speaker. Check it out here:
iPhone: No ring or sound from built-in speaker
http://support.apple.com/kb/TS1205
Have a good one,
David

Ipad 2 has no sound from built-in speaker after one day.

I received by ipad 2 yesterday and I had sound out from the built-in speaker when using facetime and
youtube.
When I turned on my ipad2 today, there are no sound from the built-in speaker. I checked the switch in
"settings" and it is set to "lock rotation" instead of "mute". So I am pretty sure my ipad2 is not
muted in the first place, using the volume locker and the volume icon shows "headphones" but
I do not have the headphones plugged in. However I got sound when I plugged in the headphones,
unplugged them and I got no sound from the built-in speakers again.
I have a 32G wifi+3G (The 3G is not enable yet) and the latest verion of iOS
Kim

Hi,
You can reset your iPad by pressing and holding the On/Off/Wake/Sleep button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If it doesn't work, you can restore your iPad using iTunes by connecting it to your computer.

How to invoke Speaker Sound from Forms 6i

Hai friends
I want to give some alert sound from the Builtin
computer speaker. In Visual Basic we can make like Chr(7)
How can i accomplish this in Forms6i. Pls reply.
I use BELL builtin it is not working.

And also this one:
Problem Description
Installed Forms 6i Rel 2 on a MS Windows machine. When trying to Import the Java
Classes getting the errors
PDE-UJI0001 Failed to create the JVM
Solution Description
You need to to install JDK 1.2.2 to run the Java Importer. And set the PATH's
and classpath's correctly.
Explanation
1. Download and install the JDK 1.2.2.
Possibly available at: http://java.sun.com/products/archive/
2. Assuming the JDK 1.2.2 is installed in c:\jdk1.2.2 directory and the JRE in
C:\PROGRA~1\JAVASOFT\JRE\1.2 directory; ORACLE_HOME=C:\Dev6iR2.
Set the PATH to
set PATH=c:\jdk1.2.2\bin;C:\PROGRA~1\JAVASOFT\JRE\1.2\bin;C:\PROGRA~1\JAVASOFT\JRE\1.2\bin\classic;%PATH%
( If you are using ias9i then the JDK 1.2.2 comes with the ias installtion ,
in this case please set the PATH to
D:\ias9i\Apache\jdk\bin;D:\ias9i\Apache\jdk\jre\bin;D:\ias9i\Apache\jdk\jre\bin\classic;%PATH% )
3. Set the CLASSPATH to set CLASSPATH=%CLASSPATH%;C:\Dev6iR2\TOOLS\COMMON60\JAVA\IMPORTER.JAR;.
(If you do not set the CLASSPATH correctly you will get the error
PDE-UJI002 Unable to find the required java importer classes)
4. Now run the Forms Builder by using the command.
C:\Dev6iR2\bin\ifbld60.exe
Now the Java Importer Should Run fine.
Francois

How to invoke Speaker Sound from Forms

Hai friends
I want to give some alert sound from the Builtin
computer speaker. In Visual Basic we can make like Chr(7)
How can i accomplish this in Forms6i. Pls reply.
I use BELL builtin it is not working.

how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers

Sound from 1 out of 5 speak

Similar Messages

Maybe you are looking for