Sound from macbook - not TV - during Apple TV Airplay HELP!

I connected my macbook to the TV via Apple TV Airplay, and the sound only comes out of the laptop, though the screen mirrioring still works.  Would love some help.

The audo goes through fine with my HP laptop but not with my mac(using the adapter) I have tried EVERYTHING

Similar Messages

  • HT204291 music from ipad not playing on apple tv

    music from ipad not playing on apple tv? Videos are, but music is not.

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
        2.    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
        3.    Restart the Apple TV (Settings > General > Restart).
        4.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        5.    Restart your router.
        6.    Restart your mobile device.

  • Unable to sync photos from MacBook (10.6.8) to iPad2 (iOS8) - help!

    unable to sync photos from MacBook (10.6.8) to iPad2 (iOS8) - help!

    Thanks for the reply. 
    I am running Snow Leopard on my MacBook (10.6.8)  I have iPhoto 11 version 9.2.3   Since upgrading to iOS 8 on my iPad2 I have been unable to sync photos from my MacBook to my iPad2.  Any suggestions you could provide would be greatly appreciated. 
    Thanks!!!

  • Stream sound from Macbook Pro to another device?

    So my headphone jack just half-died on me. I get full sound from the right ear, but the left one has little to no sound coming through. I've had headphone jack issues in the past with my macbook pro and they said I needed to replace the entire motherboard last time which was extremely expensive. My warranty has run out so doing that again would not be feasible, yet I really need the headphone jack to be working since much of my work is video/audio intensive. Is there any way I could stream audio to another device like my phone or something via bluetooth and plug headphones into that to get full sound in both ears? Or is there a fix to this issue that I don't know about? Any tips or advice would be greatly appreciated!
    Macbook Pro 13-inch (early 2010)
    2.4 GHz Intel Core 2 Duo
    10 GB 1067 MHz DDR3
    OS X Mountain Lion (10.8.5)

    You can stream audio via airtunes to an Airport express which has an analogue ouput jack, but it's line level and doesn't have a volume control, but you can use it as the source for a hifi.  You can get third party powered speakers which receive airtunes.  You can stream audio and video to an Apple TV but it only has an optical Tosslink audio out and audio and video out via hdmi.
    You can also get sound out via USB to a an offboard D/A converter which in most cases would be line-level, though you could likely find asomething with a headphone output with a volume control.
    If you look up the specs on your machine you might also find you have digital audio out via tosslink and the headphone jack which is misbehaving as the ports are combined on some models.  Then there is the mini display port which can in some cases output both sound and audio and you can get a long display port to hdmi cable a lot cheaper than an ATV.
    But, while the headphone jack replacement involves a motherboard swap, in reality, what might have happened is that a solder joint for the socket on the motherbord has failed and simply resoldering the joint would fix the issue.  If the internals of the socket like a contact breaking or being damaged is the problem then the MB would likely need replacing given the cost of labour for a tech to source and replace the whole socket.

  • Getting sound from macbook to work on HDTV

    Hi, I'm having problems getting sound from my macbook aluminum 13" to my tv. The tv is a Samsung R8 Series 37" LE37R87BD HD. i got picture up by running a dvi to hdmi to the tv. i have no problem with picture but i can't get any sound. I tried 3.5mm jack from macbook to tv 3.5mm jack. got no sound. so bought a 3.5mm Jack to 2 x RCA and still got no sound. i even ran the the jack through my home cinema system and to no luck.
    is anyone else having this problem and is there a solution?

    Forgive what may be a dumb question on my part, but you are using the correct audio jack on your MacBook? The output would be the one closest to the security slot, farthest from the display/USB ports of the two 3.5mm/optical jacks. Also check the Output tab of the Sound system preferences to make sure that the Headphones/Line output is selected. It will probably be the only output shown, but double-check just to make sure.
    Note that not all TVs will work with an auxiliary audio input when the video input is set to HDMI. Check your TV's documentation to see if it can split the video and audio input to different sources. That wouldn't, of course, explain why your audio amplifier isn't getting signal either.

  • How do I get rented movies from MacBook to appear on Apple TV?

    I can buy movies and they appear fine, but when I rent a movie on MacBook for play on Apple TV, nothing appears in Apple TV under Movies. (And I've updated the firmware on Apple TV).
    Any guidance?

    You may well be right, the opening paragraph seems to support you in the sense that you can watch them on the tv, but the whole issue of transferring it to the tv is a little vague.
    In essence it may well be that simply watching the movie via streaming is what most people will want to do anyway, if that is indeed how it works.
    If transferring is allowed then I assume this would be a straight transfer and not a sync, since only one device can have the movie at a time.
    In my situation my goal would be to rent from the mac and stream it to my tv's since I have more than one of them. If however I have to transfer it to watch it, this then causes a problem. If we assume for the time being that movies can be transferred to the tv but not the other way around, I have no way to move the movie back from tv #1 to itunes to send it to tv #2.
    I'm now less certain than I was but I'm still inclined to think that we won't be able to transfer rented content from itunes to the tv, but I have to wonder if this will really be an issue for most of us.

  • Commercial Sounds for GarageBand not made by Apple

    I'm going to take the unusual step of making a partial re-post from an earlier thread that wandered off-topic.
    A lot of newcomers here ask about expanding the library of multi-sample software instrument sounds beyond what comes with GarageBand. Of course there are Apple's own JamPacks, but many new users are not aware that there is a much larger universe out there full of many sounds from many companies. Here is some information to get you started.
    There are many companies out there which have nothing to do with Apple which are in the business of making sample libraries and players. The business goes back to the mid-1980s, before computers were used for sampling, and there are many companies in the market. They started out making sound libraries which could be loaded into musical keyboards made by companies including Akai, EMU, Yamaha, Ensoniq, Korg, et cetera ad infinitum.
    Gigasampler is a Windows-only software multi-sample player put out by the Tascam company. It won't work with GarageBand.
    Native Instruments is the name of the company that makes the Kontakt, Kompakt, and Intakt multi-sample player applications.
    Garritan is a company that makes libraries of multi-sample sounds that you can play back using the Native Instruments Kompakt and/or Tascam Gigasampler multi-sample player applications.
    EXS is the multi-sample player that comes with Apple Logic and Logic Express.
    Mark of the Unicorn makes a multi-sample player application called MACH.
    IK Multimedia makes a multi-sample player called SampleTank.
    Universal Sound Bank makes a multi-sample player called USB.
    Steinberg/Yamaha makes a multi-sample player called Halion.
    All of the programs listed above can be used with GarageBand.
    And there are many others in the market that make multi-sample players that work with different computer formats: Apple AU, Mac-compatible VST, Windows-compatbile VST, Windows Direct X, and probably some others that I'm not familiar with.
    The point is that the marketplace is set up like this:
    There are companies that sell libraries of multi-sampled instrument sounds (hundreds of them). I haven't even mentioned any of them in this post, but they are legion.
    There are companies that make multi-sample software instruments to play back the sounds from the library companies (dozens of them).
    There is some overlap between the two. Some multi-sample players come with certain sound libraries, but you can purchase others to add to them.
    Oh, yeah, there are companies not affiliated with Apple which make libraries of sounds that you can load directly into GarageBand, without the need for a third-party AU multi-sample player application. More of these are popping up every day.
    It's a big, big market, and like I said, it's been going on for twenty years.
    If you want to learn about software instruments and sample libraries outside of the Apple GarageBand world, I suggest you check out the following US magazines:
    Keyboard
    Electronic Musician
    and the following Web sites:
    www.harmony-central.com
    www.kvraudio.com
    www.macmusic.org (which is bilingual in French and English)
    Finally, I think I need to put up a FAQ on a web page with some more specific information, if Hangtime doesn't hold a patent on the whole concept.
    Cheers,

    Then they are probably in the Application Support>Logic Express folder. Try copying them to Application Support>Garage Band folders (there are two, one for the samples, one for the .exs files). Remember what you do so you can reverse the installation if need be. Restart GarageBand and see if you can see the instruments.

  • No sound from Center or Subwoofer during Calibrat

    I have a Sound Blaster Audigy 2 ZS and the Klipsch Promedia Ultra 5. Speaker System. During speaker calibration, I hear the test tones from Left, Left Rear, Right, Right Rear but not from Center or Subwoofer (the indicator flashes over the center speaker icon in the graphic but no sound comes out - same with the subwoofer).
    I know the subwoofer works when playing music but have not heard anything from the center speaker.
    Any ideas?
    Thanks.

    I have the same problem, games and music etc all speakers work, but during the tests/calibration I get no sound from rear speakers, center or the sub...... help please! (from the firewire port out the plugs all go as follows: yellow, black, green)

  • How do i get sound from macbook internal speakers? need sound settings help

    hi,
    i have installed service pack 3 on bootcamp on new macbook.
    i cant get any sound with all my audio applications, even windows media player. i can see the levels and audio files playing within the software (soundforge, wavelab, cubase etc) but cant get any sound to come out the macbook internal speakers........
    ive tried all the available audio driver settings from within the apps.
    ive checked the sound controls menu from my system tray...all the volume faders are full, unmuted.
    theres a realteck or something like that, control panel......i think realtek is the internal sound funtion of my windows xp......
    anyone help?
    (ive updated bootamp to 2.1 with software updater..... ive intalled the bootcamp drivers from my leopard install dvd....)
    shall i put the leopard dvd in again? in case the bootcamp drivers never got installed????
    i just used the first leopard dvd.........should we also use the 2nd leopard dvd????? bootcamp manual just says put leopard dvd in and install bootcamp drivers.........but it dont say which leopard dvd.........
    cheers
    i understand latency is gonna be an issue with internal sound drivers.....any one recommend third party sound drivers for use with internal macbook?
    (for proper work im gonna use a proper external soundcard with ASIO drivers, but i wanna get half decent sound and latency from macbook internally for when i wanna use JUST the laptop, with no units connected)

    dude..... i cant answer that.....cause i dont know....... im pretty sure i didnt do anything.....sound just started working..........
    ive done so much over the past few weeks.....its all a blur......
    seem to recall changing windows sound settings to NO SOUND to get those irritating beeps to go away..... thats all i can remember......
    anyway its working.....mac internal sound is working.....and also i have found a gooooood driver to use.....to lower latency...... its called asio4all...... its the best driver i have used in cubase on bootcamp...... goooooood latency figs...sounds nice too.......
    guess what? ive also had my first crash since i bought the mac......on windows xp////sdffdjojfnds
    ararrrrrrrrrrrghhhhhhhhhhhhhhhh

  • No sound from MacBook headphone jack until the cable is plugged in and -out

    Hey there! If I connect speakers (iPod Hi-Fi) to my shut down MacBook and then start the MacBook, there's no sound neither form the MacBook nor from the speakers.
    If I plug out the cable the sound comes from the MacBook as usual, if I plug it in again the Hi-Fi works regularly. How come?

    Hi,
    The HDMI sound may disable the other sound therefore you need to disable HDMI sound (remember put back if you wish to use it). Please check this video:
       http://www.youtube.com/watch?v=LlYXiTK05nM
    For example, in my machine I can just disable HDMI sound from this area:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to output sound from MacBook Pro to stereo receiver/amplifier?

    Does anyone here know what I would need to buy to send audio from my MacBook Pro to an external integrated stereo amplifier? I'm sure there's something. I'd like best quality so if you know of a USB solution please let me know.

    Typo above, 'headphone port' not 'headphone post.'
    Glad to help, and thanks for the !
    FYI, the mic port is the same, so if you have a need to get digital audio into your MBP, the mic port will do that as well as analog.
    The headphone port actually does triple-duty, in that it's both analog and digital out, and with the longer plug found on the iPhone headset, the headphone port can also function as an analog input.

  • DVD Audio- I want sound from sides, not r

    Is there any way to reconfigure so that surround sound from dvdaudio comes out of the side speakers instead of the rear when using a 7. setup?

    Blakejohann,
    I am not aware of any way to do this. The mapping to the channels is discrete and our card doesn't have software that allows remapping channel outs.
    Jeremy

  • Notes from macbook not syncing with iPhone and iPad

    notes stopped syncing in icloud from macbook air to iphone and ipad. anyone experience this? icloud settings are the same on all devices.....

    You don't need iPhoto on your mobile devices in order to use Photostream.
    It also doesn't make any difference where you purchased iPhoto from to use PhhotoStream on your Mac.
    However if you are updating iPhoto on your Mac, it is updated using the Mac app store, which uses it's own ID, which may or may not be the same as the ID you use for iTunes.

  • No sound from anvsoft not working

    The anvsoft sound device doesnt seem to be working no log on or log off sounds are working no sound from games or youtube or anything is working i tried using headphones and speakers and those dont work whats going on and how do i fix and if possible i dont want to pay a cent

    Hello rebhof,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Can I direct all sound from MacBook Pro to Airport, not just iTunes

    Hi, want to be able to choose AirPort for all audio out from my MacBook Pro, not just iTunes. Is that possible? For example I would like to stream YouTube music via AirPort...
    Any help is most appreciated.
    /R

    Hi!
    Thx for answer. However, I can not choose AirPort the way you described, only "internal speakers or Thunderbolt/external monitor speakers". Seems like it's only in iTunes one can choose AirPort output. I would like to play all aduio out via AirPort.

Maybe you are looking for