Sound glitches after upgrading from win 2000 to win

Hello!
I have this sound card since 2 years and never had any problems... but since I've upgraded from windows 2000 to windows xp, there's a lot of glitches in the sound coming from the card (it happens with all softwares I use). I'm using a sound blaster audigy 2 nx (latest drivers) on a P4 2GHz with 52 Mb Ram. Thanks in advance!

What version of the Oracle ODBC driver are you using? 8.01 is not a driver version-- it should be something like 8.1.7.x.y (assuming you're using one of the 8.1.7 Oracle ODBC drivers).
Since Oracle desupported the 8.1.7 database almost a year ago, do you have the option of upgrading the Oracle client to a supported release (probably 9.2 in your case)?
Unfortunately, I don't know what your particular problem is, but I have certainly seen problems mixing the latest and greatest versions of applications with older versions of the Oracle client.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

BIAS SoundSaver Input Level Not Working after upgrade from Win 8 to 8.1

Have been using BIAS SoundSaver for INport software to digitize music LPs and cassette tapes to load on MP3 player. Worked fine with Windows 8. However, now that I have upgraded to Win 8.1, I can get sound of LPs and cassette tapes but the Input Level that controls the recording level on the software no longer functions. My computer is an HP ENVY Phoenix h9-1355 Desktop Computer with IDT High Definition Audio CODEC. I am wondering if the problem may be with the audio drivers installed on the computer.
This question was solved.
View Solution.

Hi @Alkay
I see that you are having sound issues after your 8.1 upgrade. Did you update to the 8.1 versions of the drivers?
They may be found here: HP ENVY Phoenix h9-1355 Desktop PC Drivers
Is it only the one application seeing this problem?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

After upgrading from win 7 - win 8, do I really need the win 7 recovery partition?

Hello.
I'm a happy camper after upgrading my HP Spectre XT from win 7 to win 8 (Win 8 upgrade offer). The 128GB SSD disks just makes everything so smooth and fast.
However I am abit annoyed with the Win 7 recovery partition that still uses 20 GB of my total 128GB space.
I have tried searching the forums, as well as the www for any good answers, but I end up more confused.
So I am asking the community some questions that interests me, and hopefully you can provide me with some meaningsful answers
1. Can I now delete my win 7 recovery partition, and if so what is the most effiecient and safe way to do it?
2. Is there a a good way to make sure that if (heaven forbid) something would happen, I still would be able to recover my notebook preferably to win 8, and not the preinstalled OEM win 7?
3. Of course the Spectre XT has no optical drive, so if its doable I might need to make an win 8 recovery partition in the end. Is it possible?

You can use Windows builtin Disk Management to delete the partition, or EaseUS software. Both procedures are outlined at EaseUS site:
http://www.partition-tool.com/resource/windows-8-partition-manager/delete-windows-8-partition.htm
As for a Recovery option after deleting, look at System Imaging which is builtin Windows 8 also.You need an external USB hdd for this.
http://www.eightforums.com/tutorials/8956-system-image-create-windows-8-a.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Can't activate secure boot after upgrading from Win 7 to Win 8 on a Spectre XT

Hi everybody,
my first post here, so please forgive me if the topic has already been discussed
I did search before posting anyway, but I couldn't found anything addressing this specific point.
My (small, I must admit) problem is as follows:
I recently purchased a Spectre XT 13-2005tu (i7 processor, 4Gb RAM, 256Gb SSD) with Windows 7 pre-installed.
After installing my favourite applications and using it for a few weeks without any trouble, I thought to take the opportunity of the $14.99 upgrade to Win 8, so I downloaded Windows 8 Pro and installed it (as an upgrade, rather than a fresh installation, because I didn't want to loose the customizations I already made).
I also installed all the updates available on HP website (sp59158 for updated BIOS, sp58404 for UEFI support, ecc.)
The whole upgrade worked nicely, and the PC is now up and running with Win 8.
Now, I'm trying to use at best all the possibilities Win 8 has to offer, and among them, the UEFI secure boot.
I found the "legacy support" option in the BIOS settings, which as I understand must be disabled to activate the UEFI secure boot, but if I do that the PC tells that there's no operating system on the disk and doesn't boot anymore.
Which was a bit scary by the way, but eventually I could re-enable the legacy support in the BIOS and have the PC working again, but of course with no secure boot.
I suppose there must be some other re-configuration that should be done before changing the BIOS parameter, but I couldn't find any instruction for that anywhere on the web.
On the other hand, it would be indeed weird if the secure boot could not be configured AFTER the OS upgrade, and a new fresh installation would be necessary.
I'd rather part with the secure boot than re-install everything, but that would be a shame... :-(
I hope someone can explain what should be done, many thanks in advance!

Thanks for your feedback, but I don't think your issue is the same as the one I previously explained.
The UEFI/secure boot setting is a basic configuration affecting the way the PC boots, regardless of whether it is connected to a network or not.
By the way, in the meantime I've seen in a shop exactly the same PC model which I'm using, now sold with Win 8 pre-installed, and it was working with the UEFI enabled (= BIOS "legacy support" disabled).
Therefore, the configuration I'm interested in has to be feasible, one way or another...!

No 'Line input' option in sound prefs after upgrading from Tiger to Leopard

I have connected guitars and mics using Garageband 3 without a problem, until upgrading from Tiger to Leopard 10.5.8.
I'm not getting sound from the guitar apart from feedback when I plug it in to the audio line-in port on my iMac G5.
I have read many of the questions and comments in the relevant forums all pointing to selecting the line-in option of the input tab in the sound preferences window.
I only have the 'internal mic' appearing in that window now.
I've checked that the cables are working correctly on a guitar amp and are fine.
So not sure why I don't get the 'Line-in' option anymore.
Are there any patches/updates to cure this problem, or would updating to Garageband 9 cure the problem?
Thanks,
Mick

Yes, checked the 'Audio MIDI Setup' utility and can select Line-in from there.
All working fine now!
Thanks very much for your help.
Mick

Problem after upgrading from Office 2000 to Office 2003

All:
Using Excel 2000 under Windows XP, ORACLE 8.01 ODBC driver, and ORACLE 8.1.7.4 database on an RS6000, data retrievals work fine.
Some users are testing PCs upgraded to Office 2003. Using same ORACLE ODBC driver and database, some columns of Excel spreadsheet now are in English and others in a different character set (basically garbage). Again, some are fine, some are not.
Thoughts/Ideas/Opinions??
Thank you in advance.
Mike
Standish Mellon Asset Management

What version of the Oracle ODBC driver are you using? 8.01 is not a driver version-- it should be something like 8.1.7.x.y (assuming you're using one of the 8.1.7 Oracle ODBC drivers).
Since Oracle desupported the 8.1.7 database almost a year ago, do you have the option of upgrading the Oracle client to a supported release (probably 9.2 in your case)?
Unfortunately, I don't know what your particular problem is, but I have certainly seen problems mixing the latest and greatest versions of applications with older versions of the Oracle client.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Cannot scroll or zoom with touchpad after upgrading from win 8 to win 8.1

Hi everyone,
I upgraded win 8 to win 8.1, and then my laptop's touchpad cannot scrol, rotate, or zoom. Does anyone know how to fix it?
My laptop is envy touchsmart 15t j000.
thanks

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate

HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate
what can I do?

Uninstall the current audio driver and install it again.
other option is trying driver from microsoft update.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

The synth pad sound Warm Pad has changed after upgrading from Logic Express 7 to Logic Studio

Hello!
I have composed a lot of songs over the years using Logic Express 7, and my favourite synth pad sound there was a sound called Warm Pad (from the EXS24 Sampler).
A half a year ago I upgraded to Logic Studio, mainly because I needed WaveBurner. Happily, all my songs sounded exactly the same after the upgrade, except from 1 sound: The synth pad sound Warm Pad. It still got the same name and location, but the sound was replaced with a very sharp and much more distinct sound (not warm at all, in my ears at least).
I have tried to replace it with different synth pad sounds from the EXS24 Sampler, and the one I find to come most close to the old Warm Pad from Logic Express, is a synth pad sound called Pad 1. Still, I don’t think it sound exactly the same.
So, in order to finish all my songs and make an album, I ask you for help:
1. Do you know how I can get EXACTLY the same sound as the old Warm Pad Logic Express, with my new Logic Studio?
2. Have you experienced the same with sounds, after upgrading from one Logic version to a newer one? And what have you done to find back to the old sounds?
I will be VERY thankful for help, because I am not a genius in the mysterious (but yet exiting) world of synthesizer synthesis.
Best regards,
Asle
Composer, guitarist and entrepreneur
Norway

I have the boxed version of logic studio.
When you install, if you pick the "ad hoc" installation you can add the logic7 patches to your existing patches.
I think running installation again you should be able to install just that.

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

Would like to upgrade to Dragon Naturally Speaking 11 from DNS 6 (which would also entail a necessary upgrade from Windows 2000 to 7) but understand after all this expense and trouble, DNS upgrade may not be compatible with Firefox 6?

Question
Would like to upgrade to Dragon Naturally Speaking 11 from DNS 6 (which would also entail a necessary upgrade from Windows 2000 to 7) but understand after all this expense and trouble, DNS upgrade may not be compatible with Firefox 6?
Main priority is voice activation upgrade. Ideas about how to proceed appreciated!

AFAIK, it's been over three years since a WinXP laptop or desktop PC has been sold; I specifically bought a laptop in June 2008 because it was being clearanced by that retail chain to meet Microsoft's deadline, and got it real cheap. It was tagged for the store manager to purchase, but he let me have it because I exceeded his expectations for the services I performed for his store and thought I deserved it. Anything that wasn't made for Vista-compatibility will be very iffy with Win7, IMO - so that basically rules out anything that was made before like Oct or Nov 2007.
Unless another DNS 11 user happens to see this thread and can verify whether it works in Firefox 6.0 or not, I don't what to recommend except for you doing a web search to see what other DNS / Firefox users have to say about compatibility.

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

Bluetooth does not work well after upgrade to win 8.1 from win 8

System: Dell Inspiron 15R 5520
Bluetooth hardware: Intel(R) Centrino(R) Wireless Bluetooth(R) 4.0 + High Speed Adapter
Microsoft Bluetooth Enumerator
Ever since I upgraded from Win 8 to 8.1, the bluetooth has not been working well.
The option to browse a remote folder or send a file does not work.
I can send a file only by opening the contaning folder, right click, and send to bluetooth, but cannot receive a file unless I go to
run and then open fsquirt.exe .
I have unpaired and uninstalled the devices respectively, and then reinstalled and repaired them. But this does not work .either.
Unfortunately, I am unable to paste screenshots of the device manager and error messages until I am verified.
Can anyone give me a solution to this problem?

Verify that you have the latest drivers for Windows 8.1 installed from the manufacturer's website.
http://www.dell.com/support/drivers/us/en/19/Product/inspiron-15r-5520

System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

Satellite L75D-A7283
It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
-Jerry

Sound glitches after upgrading from win 2000 to win

Similar Messages

Maybe you are looking for