Sound has gone after virus scan
This morning I ran a virus scan on my computer and ever since have had no sound.
When I went to the control panel it said that I didn't have any sound driver.. What do I do?
I tried to perform a system restore but sadly this was turned off and therefore unavailable.
Hopefully someone can help me out.
Thanks,
Faith
> OS? What's that?
OS means operating system. Its windows. ;)
> I have a satelitte pro
Nice but there are many different Satellite Pro series
> I have tried to install the drivers but then I don't know what to do from there? I'm just a bit stuck to be honest.
Download the sound driver, unzip the package, and execute the setup exe.
Similar Messages
-
After getting my screen repaired at apple store, my sound has gone strange.
after getting my screen repaired at apple store, my sound has gone strange. Has anyone else had that problem? how could i fix it? Its harder to hear and it sounds strange.
Hey Paul,
Sadly no, I don't think it will get resolved any time. Do you have the exact same issues?
Please let me know if you solve it. Did you contact Apple support? What did they say?
THanks -
I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help
iPhone 4, iOS 6
The ringtones are working but all other sounds are not working please helpI had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time -
I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help
Until you have tried Maps, Music, etc. first hand, I wouldn't formulate negative opinions about them. And updates, if performed correctly, do not erase data.
I presume that last time you updated through iTunes. This time, update over Wi-Fi by going to Settings > General > Software Update. -
my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
any help please im going out my mind
regards jamesThanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
Again thanks for replying
Regards James -
Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:
iMac Model Identifier:
iMac12,1 Processor Name:
Intel Core i5 Processor Speed:
2.7 GHz I am running OSX 10.6.8So just to be clear on a few things:
Should partitioning the hard drive not work is it undoable?
Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
Is there a limited amount of space that makes this process ineffective?
I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
Thanks again -
my sound has gone out and please don't tell me about PRAM because my MacBook keeps going to the login screen and I can't hear any start up beeps neither someone PLEASE help me
bcoady90 wrote:
My guess is a loose connection.
I suspect you are correct. I would suggest you bring it to a repair facility that may have better diagnostic tools, preferably an Apple store genius bar.
Ciao. -
Sound (optical) gone after upgrade [SOLVED]
Hi All,
I have had great fun after the last upgrade. First problem nvidia driver would not load, solved by allocating more ram on the kernel line (in /boot/menu.1st
Second problem is I no longer have a visible optical sound interface (the one on the motherboard, intel chip ) The nvidia hdmi sound channel is there though ..
pavucontrol shows no optical device just nvidia hdmi ..
Anyone know how to debug this?
Last edited by bmentink (2012-06-12 06:46:13)Lone_Wolf wrote:
ok, looks like we need to check the basics first.
from console run alsamixer, select the card with the s/pdif output and verify is is not muted (it should show OO at the bottom for that channel).
Note the name of the S/pdif channel, run aplay --list-pcms to make sure you have the correct pcm name for it.
then try aplay --device=pcm_name /path/to/any/soundfile
(/usr/share/sounds has many) .
If that commands outputs sound, you'll know for sure the s/pdif output is working.
This is what aplay --list-pcms returns:
[bmentink@TV ~]$ aplay --list-pcms
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC1200 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=Intel,DEV=0
HDA Intel, ALC1200 Digital
HDMI Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
HDMI Audio Output
As you see I only have analog and hdmi devices, no spdif ..
B. -
Updated to 10.5.4 on my Air - but the SOUND has gone!
I just updated my OS today, and as a result of the update, the volume control has gone away. There is no sound on the laptop. On the Sound menu - it says it does not find any output devices!
Can you help?Hi,
I just had the same issue and found an answer in this forum. I'm not sure how to refer you to the original post but here's the solution that was recommended and it worked for me:
PRAM Reset
http://support.apple.com/kb/HT1379
Good luck.
Original thread: http://discussions.apple.com/thread.jspa?threadID=1564785&tstart=210 -
My itunes libary has gone after updating itunes
Hi , after updating my itunes to 11.0.2 i've opened itunes and everything in my libary has gone, its wiped all photos and i was wondering if there was anyway off getting it back as i don't want to have to create all playlists again
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
tt2 -
I just uploaded Maverick onto my MacBook Pro and now the start up sound is gone. Is that supposed to happen?
Hmm.....I tryed that and there isn't anything that pertains to the start up sound. I guess I have to keep searching. Thanx for the help though.
-
For no reason that I can see, the sound has been disabled or something in all my games. I've tried checking settings, but there's nothin there to explain it. Any ideas?
Have you got notifications muted ? Only notifications (including games) get muted, so the Music/iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
Volume sound affect gone after downloading Yosemite.
after i downloaded yosemite, my volume sound affects are gone (the sound when you press the volume button)
Make sure that those sound effects are enabled, checkmarks in those two boxes.
System Preferences > Sound > Sound Effects -
All sound devices gone after upgrade to 10.8.5 - help!!
Hi There,
I recently upgraded to Mountain Lion 10.8.5 and have lost all my sound (doesn't work over the net nor iTunes etc. - in fact iTunes doesn't even play). This all seems to be because if I open 'Audio MIDI setup' it simply states 'no devices found on the system'
Besides the obvious time machine back to the previous OSX is there anything I can do (time machine is back to a drive in my office and I am away from this). I'm pretty annoyed this has happened, everything else seems fine, thanks, JimBack up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio/com.apple.audio.SystemSettings.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected file to the Trash. You may be prompted for your administrator password.
Reboot and recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
I have an Iphone 5 and I bought albums on it via itunes store app. I now realised they have gone. I can only imagine it is because I have had to change my apple ID as I no longer use the old email address (old company). I am disappointed that this has been the result though. I have synced my iphone with one of the PC's that has my itunes to see if it will reappear but no. How do I get them back?
It is strange as it was there one evening and then the next it was gone. I hadn't actually changed anything that evening but I wonder if it was the result of the home sharing sync or something?It doesn't matter that your Apple ID, which uses the same characters as your old email address, now has a defunct address. You need to go into your Apple ID profile and change the defunct address for a valid one. This will not necessarily change the "address" which stands as your Apple ID.
By "changing" the address directly on the Apple ID itself and not on the profile, you inavertedly created a new Apple ID.
Maybe you are looking for
-
Trying to capture hd video from camera
I normally transfer video into my computer via a transfer deck; however, my brother had a hd mini dv tape that he wanted transferred to dvd. He sent me out his camera and I tried taking the dv in/out from the deck and plugging it into the camera, but
-
Can't find my Photoshop preferences file
I KNOW this is stupid, but on Windows 7, 64-bit, with all the stuff turned on to show me hidden files and system files and everything, Photoshop CS6 (13.0.1?), and Lightroom 4.3 I'm trying to follow the advice that everything I do in Photoshop should
-
Copying a link from one page to another in safari
Hi I am trying to copy a link from one one page to another, it will let me copy but not paste, any solutions?
-
How to Find Controller class of BSP application for particular Iview
Hi All, Any one please help me to find a Controlller class of BSP for an I view. http://Host Name :Port No/sap/bc/gui/sap/its/wosm-cr-->this is for sap retail, My requirement is to change some source code in that particular iview. i goine with S
-
Hello, I am new to the Macbook just converted from PC! It is hard getting used to the system but i am trying to learn. I watch alot of youtube videos and i have seen that everyone has a hard drive icon on their desktop. Why is that? Is that a default