Sound in only one earphone - It's not the earphones though

I just bought a pair of refurbished 1st gen. shuffles from Apple in Nov. After a couple of weeks, one of the stopped plaing music through one side of the earphones. I thought I blew the earphone, so I grab another pair, same thing. Same thing with the 3rd pair.
So, for some reason, my shuffle is only playing audio via one earphone. Any ideas for a fix? No chance at a warrenty fix (I think).

I just bought a pair of refurbished 1st gen. shuffles
from Apple in Nov. After a couple of weeks, one of
the stopped plaing music through one side of the
earphones. I thought I blew the earphone, so I grab
another pair, same thing. Same thing with the 3rd
pair.
So, for some reason, my shuffle is only playing audio
via one earphone. Any ideas for a fix? No chance at
a warrenty fix (I think).
Refurbished Shuffles have the same 1 year limited warranty as new ones...contact Apple for your warranty status: http://www.apple.com/support/contact/

Similar Messages

How can I print only one or two pages, not the whole article?

I just want to print one page not the whole article. There is no provision for what pages to print.

I don't know where they are in Word but the print dialog is standard throughout OSX and this seems logical enough.
The only problem is the Paper Handling is hidden under Layout. But sort of makes sense.
Peter

My Ipod touch Worked Fine Until Sound Just Dropped. Im not using apple earphones, But its not the earphones that are Bugging me its when i remove them Audio Fails.

Is there anything that i could do to fix this?

Try in order:
- Resetting the iPOd:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPod from backup via iTunes on your computer
- Restoring the iPod to factory defaults/new iPod via iTunes.
- Make an appointment at the Genius Bar of an Apple store.

Ipod classic sound from only one channel

My 80GB Ipod classic has sound from only one headphone. Same problem when docked so it's not a headphone or socket problem. It's as if only one channel is working. Any ideas?

Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
Clinton

How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

https://www.google.com/calendar/iphoneselect

How do i get my contacts back? they are backed up by i cloud but when I "MERGE" only the new ones are there and not the old ones

how do i get my contacts back? they are backed up by i cloud but when I "MERGE" only the new ones are there and not the old ones

Hi sfuentes,
You need to check iCloud to see if they are actually there. Go to iCloud.com and sign in and then look at your Contacts there to see if the old ones are still showing on iCloud.
If they are not, then you can either re-enter them while you are on iCloud.com, or you can restore your device from the backup where you saved them:
https://support.apple.com/kb/ph12521
Cheers,
GB

Only one epub file will not open in ADE or on my Nook. The others I downloaded will open on both and will copy to the Nook as usual.

I download epub books from Overdrive. Only one epub file will not open in ADE on my Mac or on my Nook. The many others I've downloaded will open on both and will copy to the Nook as usual. Using the latest edition of ADE. Could be a corrupted ePub file? Curiously, this is the second time I've downloaded this epub from the same site, and I had no problem the first time. It still has 9 days remaining in the borrowing period.

Forgot to make clear that on both my Mac and the Nook, attempting to open the epub causes ADE to crash.

Able to connect keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please

Hello,
I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
thanks,

Hello:
You will need to delete the keyboard from the other Mac. Simply disconnecting it leaves it still paired with the first Mac.
Barry

Why cant i open all my bookmarks in a new tab? only the ones visible above me, not the ones that show up when i click in the arrow to the upper right?

why cant i open all my bookmarks in a new tab? only the ones visible above me, not the ones that show up when i click in the arrow to the upper right?

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

I have 2 MSI 8600 GTS SLI. Only one is recognized in NOT SLI.

Hello,
Please help me.
I have 2 charts MSI 8600 GTS SLI. Only one is recognized in NOT SLI.
The ESATA_LED1 is extinguished, in SLI or NOT SLI.
The LED 1,2,3, are lit, in SLI or NOT SLI.
In SLI the switch card is in SLI Mode (x8/x8) and SLI Bridge Card is clipé: the LED6 is
extinguished, the LED4 and 5 are RED and the chart in slot PCI_E4 EAST
is perfectly RECOGNIZED.
In NOT SLI the switch card being in (not-SLI Mode (X 16) the chart in slot PCI_E4
does not appear nowhere.
Neither in the config panel, neither by the scan of Ma-config.com, nor by Everest.
And, of course, the screen connected on this second chart does not receive a signal.
The config off my pc is : http://ma-config.com/AfficherResume-19211-1.html
I thank very much for the help off receive.
armand

Quote from: armand jadot on 01-April-09, 04:24:48
- the second PCI Express x 16 slot (PCI_E4) is a special design that supports PCI Express x 8 mode only.
- the second PCI Express x 16 slot (PCI_E4) only supports to install graphics card in SLI mode.
Is this possible that one can exclusively use this motherboard only for the SLI system?.
And no for 3 or 4 screens ?
I say you a new big thanks for your respons.
armand
Yes its only for SLi, read the second line carefully:
the second PCI Express x 16 slot (PCI_E4) only supports to install graphics card in SLI mode
My board, P6N SLi platinum, has the same, I too can only use the second slot for SLi.
Inserting a card and not using switchcard results in no show for second card.
And if I do use switchcard and use another graphicscard, say a 8600GT in slot one and a 8800GT in second slot, results in BSOD or blank screen.
Maybe someone else here knows how to use 4 screens on your P6N SLi V2, if thats what you want.

HT201257 I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to

I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store

Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic.

I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones

I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones
The problem occurred a few days after I had updated to iOS 7.02

Hey Tahls23!
I have an article that can help you troubleshoot that issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

When receiving a Group iMessage, i am only seeing one person's message, not the other.

When receiving a Group iMessage, i am only seeing one person's message, not the other.

Hi RumplestilskinToo!
You may need to check and make sure that your Group Messaging setting is turned on:
Messages settings - iPhone
http://help.apple.com/iphone/7/#/iphf2d853e3
Go to Settings > Messages to set options for Messages, including:
Turning iMessage on or off
Notifying others when you’ve read their messages
Specifying an Apple ID or email address to use with Messages
SMS and MMS options
Turning group messaging on or off
Showing the Subject field
Showing the character count
Blocking unwanted messages
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Can get sound from only one channel

I am having trouble with my sound. I am able to get sound fron only one channel. Is this something I
can fix or do I need to go to an apple store?

Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
Clinton

Have lost the sound on my ipad:( but it works with the earphones.i have done the mute button and restart stuff ,still no luck .help please

Have lost the sound on my ipad:( but it works with the earphones.i have done the mute button and restart stuff ,still no luck .help please

Hi, sill no joy with my sound on my iPad .the sound only works on one app ( Annie ) and the ring volume and it works for about 5 seconds after I switch it on . Was talking to apple and they said the reset my iPad and this will fix it .done this and it is still not working only with earphone and Annie. What next ?As they said this is unheard of as it was the upgrade to iso6 that caused this problem . Help

Sound in only one earphone - It's not the earphones though

Similar Messages

Maybe you are looking for