Sound in source but not in Program/Preview

I have a problem with Premiere, when I watch the file in source and trim it, it plays out sound to my soundcard...
But then, when I drag it to the timeline, and plays the preview of my timeline, there is no sound. The audio meter shows that it plays sound, but no output tu the sound card.
I have a Balckmagic decklink card installed, but in the settings in Premiere I have set it to use main soundcard...

Adobe Premiere CS 5.5. I have the same settings as before I reinstalled the PC... Before it worked, i tried to reinstall Premiere today, but did'nt help...

Similar Messages

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

I'm trying to install adobe acrobat XI pro, the trial version. The Install Download Assist pops up but the program doesn't install. I do see a file named XI Pro, but not a program. It seems the program never completely downloads. Any suggestions? Thanks.

I've tried to download the trial version of Acrobat XI pro but it's not working. The time bar is active for the download and indicates that it will take two hours. When I come back, the screen has gone back to the "install free trial here" page. I do see a file for XI Pro, but not a program.

try a direct download,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I need to download an Application from a Trusted source, but not an apple source.

I need to download an application from a trusted source, but not an apple source. Application is apparently downloads, but the computer will not open it. I have turned off my fire wall. I should press control and then the app which should be in the applications folder. It does not appear to be in that folder.

System Preferences > Security & Privacy > General
Unlock the lock if you have to. Click the lock and authenticate.
"Allow applications downloaded from:"
Select "Anywhere".
Best.

Audio in source but not when dragged onto timeline

Hi,
I have just been editing some video taken with a dslr, and the audio is there in the source, but not when dragged to the timline?
I see there is an option to select drag video or audio only, but I cannot select the audio.....
Any help with tis please...?
Kind Regards
Rossco

http://forums.adobe.com/thread/1374590?tstart=0

TS3274 Getting sound for music, but not for game apps. Checked settings and sound is on. Any suggestions.

My volume controls work and getting sound for music but not for game apps. I did check settings and sound is turned on under notifications and in the app. Any help would be appreciated

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

Swf file works but not html when preview and publish

hi,
i made a simple nav bar with a dropdown menu it works fine in flash mode and preview but when i try to embed into html it only show the nav bar but not the dropdown menu. please advice.
thanks in advance!

http://lunarvision.zxq.net/banner_flash_test.swf // the swf file
http://lunarvision.zxq.net // when it on the website.
thanks!

4 GB iPod Nano connected to A/C source but not charging

I have resetted my iPod to factory settings and used all other common troubleshooting tips but...
My 4GB iPod Nano is connected to an A/C source but does not charge. Oddly enough, the iPod says its charging, but when I disconnect the source, the battery has not charged at all. When I use other people's A/C adapter and cable, the iPod charges.
I have used the same USB cable to connect to my computer, and it does the same thing. I can transfer data to and from my iPod using this cable.
Is it possible for a USB cable to transfer data but not power?
Im really confused, because the cable clearly works but no power is being transferred, either by my computer's powered USB ports or by my A/C adapter being plugged into the wall.
Dell Precision 380 Windows XP Pro

More time as in longer charging times, or allow the A/C adapter and cable to chill out for awhile?

Why certain functionality works in Adobe Acrobat, but not in LiveCycle Preview PDF?

I have some simple logic in a LiveCycle form that will hide a subform when I click a checkbox. When I save as dynamic PDF and open in Adobe Acrobat 9, it works fine, but when I test the .xdp in LiveCycle Preview PDF it does not. I'm new to JavaScript and have wasted some time troubleshooting what I thought was a problem, only to find out it was working. Am I doing something that is not capatible with Preview PDF?
Attached below are images of hierarchy, design, and code. I realize the hierarchy is more complex than it needs to be. It is an excerpt I built to test this functionality, based on the full document.
Thanks.
form1.diag.Cervical.show::click - (JavaScript, client)
if (this.rawValue == 1) {narrative.Cervical.mre.presence = "visible"} else {narrative.Cervical.mre.presence = "hidden"}
form1.narrative.Cervical.mre::initialize - (JavaScript, client)
this.presence = "hidden";

Did you made the form as Dynamic and Interactive in the preview..
     1) Goto File menu -> Form Properties and select Defaults tab. Change the Default Render Format as Dynamic XML form
     2) Select the Preview Tab. Set the Preview type as "Interactive Form" and Preview Adobe XML form as Dynamic XML form
     3) Finally while saving the PDF select Save As Type as "Adobe Dynamic XML Form".
Thanks
Srini

How to tell which items are in iTunes library on disc but not in program library?

I made a mistake the other night and I deleted some items from my iTunes library ... but NOT from disc.
These items are still in my 65 gig iTunes library on disc. Somewhere.
I'd like to re-add these songs. Is there any way to tell which songs in the iTunes library on disc are not in the iTunes program library?
I don't want to have to add all 65 gigs again and then remove all the duplicates
thanks!

You should try dragging some files already in the library into iTunes to see what happens. I just did, and the new iTunes 10.6 seems to be ignoring them. I then made a copy of a file already in the library, and I added both it and the original by dragging and dropping. Only the new file was added. There was no warning about duplicates in either test. So you may be able to drag your whole library back into iTunes.
For when you do want to determine what files on disk aren't in the iTunes library or vice versa, here's one way to do it (if there's an easier way, I'm all ears):
Export your library as a playlist to a text file.
Use a program that can recursively list all your files on disk as full paths and save its output to a text file.
Load the into a decent text editor. I use Notepad++. Then use a regexp search/replace to tidy up the files so that both consist of one fully qualified filename per line.
Sort the files.
Diff the files and examine the differences.
I can do both 4 and 5 in Notepad++.

Command Tilde works in most apps but not Safari or Preview

Hi
The Command-Tilde command (window-switching) works in most of my applications (Chrome, Firefox, jEdit, Finder, Terminal, Xcode(sometimes), etc.) However,the command-tilde does not work in Safari or Preview. Is there a way to fix this? I find it quite annoying and have not been able to find a solution. I have tried resetting the System Preferences shortcut and that did not work. Uninstalling/Reinstalling Safari & Preview does not seem to be an option. I am not willing to reinstall Lion unless absolutely necessary.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

I movies work with sound in quicktime but not in imovie hd!!!

I have clips that worked in imovie hd before but all of a sudden the sound will not work, but they will work in quicktime....any ideas?

Welcome to iMovie Discussions.
Some clips - which started life not as DV camcorder clips, but might be .AVI, or somesuch, downloaded from the web, or shot as movies with a digital stills camera - may have audio in QuickTime but not in iMovie.
QuickTime understands and replays many different file formats (..see all the different file formats QuickTime Player can handle, in the right-hand column here..) ..some of which iMovie can't handle.
If your clips "..worked in imovie hd before but all of a sudden the sound will not work.." it might be because you'd had QuickTime open in the background, previously, or because you'd altered them in some way ..or maybe you 'Extracted' their audio, but don't have the check-boxes ticked for the audio tracks at the right-hand edge of the Timeline.
The most important question is: were these clips originally from a tape-based DV camcorder, or did you import them from something else, e.g; web, hard disc camcorder, DVD camcorder, .AVI or other iMovie-incompatible origins?

Sound for music but not for videos

Hi,
I can listen to songs on my Ipod, but when I watch movies, there is not sound. Any ideas?
Thanks!

Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

Sound through speakers but not through headphones

hello i have an hp envy 15-k002ne laptop wtih beats audio. i recently reinstalled windows 8.1 on the machine and was able to get all my drivers from the hp support website and unortunately the realtek high definition audio driver for sound on my machine made it in such a way that sound only comes from my speakers but not through my headphones. i tried using different headsets but it recognises some of them as microphones only because of that feature. someone please help me for i have been restless for days. thanks in advance

Hi @aflokko ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you recently reinstalled Windows 8.1 and were able to get all the drivers from the HP support website.
You have audio through your speakers but not your headsets.
Have you ran The HP Support Assistant to aid with HP updates and resolving issues?
Have you tried Using Automated Troubleshooting (Windows 8) to aid with this difficulty?
Here is a link to Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices that should help.
If you are still having an issue, I suggest contacting HP support for further assistance.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Cs6 trial downloaded but not in programs list.

I recently downloaded the CS6 trial version onto my Gateway 64bit system. The files ended up in my adobe programs folder, but NOT on my programs list and I have no desktop icon to launch the program. How to I get the files into my programs list and launch it?

After downloading had the installer started? For example, did you get a Try/ enter Serial number screen?
The Adobe Download Assistant prompts you for download location, and saves the installer there.
When prompted, what location had you chosen?
When you say, the folders are created in the programs folder, what files do you see inside it?
If you see only 2: one exe and another .7Z, then those are the downloaded files; Move the entire folder to your desktop and start the exe file to start the installation process.

Sound in source but not in Program/Preview

Similar Messages

Maybe you are looking for