Sound in windows xp 64 bits

I have the following problem, i have a pavilion dv6704nr laptop, i need to install the sound in windows xp 64 bit , and not get the drivers
 Motherboard:Hewlett-Packard HP Pavilion dv6700 Notebook PCChipset del motherboard  nVIDIA nForce 7150M-630M, AMD Hammer Memoria GeForce
 I was unable to configure I need help please

Well after about 3 days of googling I finally found a driver that works...it's
http://rapidshare.com/files/21232083/ati_conexant_audio_driver_x64.rar 
Don't think it was the same one I used last time, but I heard this ATI southbridge driver does work to fix the Conexant sound. The ATI driver added a few junk items to my desktop, "free games, 1000 free songs, and free dolphin screensaver." I guess I can enjoy them now that my sound's working.

Similar Messages

  • Start Navigation sound in Windows 7 64 bit dissappeared

    ? [size="">I have been scratching my head over this one.
    [size="">After doing a clean install of Windows 7 64 bit on a new build this week, and installing a new X-Fi PCIe Titanium Fatality Pro, I found the start navigation windows sound was no longer there - I am talking about the brief sound you hear, that sounds like a click, when you click a link, double click a folder to open , etc. I could find the sound in windows sounds, but when I pressed test I could not hear it.
    [size="">
    [size="">After much trial and error, I discovered that I had to disable sound blaster enhancements, in the properties tab for speakers in the sound card settings. I now have that windows sound back.
    [size="">When I enable sound blaster enhancements, it goes away, when I disable them, it is back to normal.
    [size="">
    [size="">Is this normal or unique to me?

    Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
    Seems like most people don't like this start navigation sound, but I do.
    I don't like the fact of having to disable soundblaster enhancements also.
    Have you noticed that if you change the windows theme to something else it will actually work?

  • Distorted sounds in Windows 7 32 bit

    Hi...
    I re-installed my system with (Dutch) Windows 7 32 bit and used the "Vista" driver CD for my SB X-fi Music card.
    When I play MP3 or WAV files, the quality is reasonable, however, some sounds, specially vocals, are damped by the bass-tones.
    When I play a CD in my Plextor 80SA dvd drive, I get a very distorted sound.
    Doesn't matter if it is a burned CD or a original CD from the music store.
    I think that the output from my DVD dri've is to high, but I don't know where I can change the output level.
    Also tried the latest updated drivers for the X-fi card, but that has no change in the sounds, cd's are still distorted and basstones in MP3 and WAV damp the vocals and other instruments.
    Don't know what to do...please, someone with advise?
    Grtz.
    Zipper04
    Johan Lemmers

    Using earphones, the same thing happens, the bass tones dampen other sounds.
    I tested the speakers with the Creative Diagnostics application and there seems to be nothing wrong with them, even when I pump up the volume to 80 or 90% of the max volume there is no distortion at all in the speaker system.
    I have ripped a CD and played the saved MP3 or WAV?files, they do the same as downloaded MP3 WAV files, bass tones dampen the other sounds. Sometimes the first two or three songs played, are all fine but then it slowly starts to happen... In other occasions, it happens immedaitely.
    I have two identical dvd drives in my system (running on Windows 7 Ultimate) and used the second (hardly used) spare drive, also a Plextor 80SA, to play a legal bought CD and this one gives distorted sounds too! Volume doen't matter, by the way, distortion is also present on low volumes.
    I must add to this that, when I was running Windows XP Professional with SP3 on my system, none of the above happened... It all started after re-installing my system with Windows 7 Ultimate.
    Grtz.
    Johan Lemmers.
    the Netherlands

  • No sound on windows 7 64 bit?

    Hi, I recently installed windows 7 64 bit on my macbook, and first thing I noticed is that there was no sound. Any help?

    Do a search for the same question and you'll find quite a few answers. It depends on the model/year, etc, of your computer on what the fix is. Too many to list here.
    At the top of the window there are two search bars, use the one with the Blue search button and it will just do a search in the Boot Camp forum. There are also a dozen or so pages of posts you can browse also.
    Try  No sound in Windows .
    Good luck......

  • Bad Sound in Windows 7 (32 bit) with bootcamp 3.1 on iMac 8,1

    I have the following sound issues in windows 7:
    I have a strange noise in the background of the sound. On low volume it is more notice able then on high volume. The noise seems to come from the left side only, when i mute the left side the sound seems to be ok.
    When i mute the sound (both sides), there came still hearable output from my imac. It seems to come only or more from the right side.
    The headphone jack is not working. The system detects the plug in of the headphone, but that's all. The sound come still from the internal speakers.
    I try the following things to fix it:
    I installed the newest realtek sound driver. It make no difference.
    I deactivated wlan and bluetooth to check for interference and conflict problems. It had no effect.
    I try different settings in realtek sound manager and windows sound mixer. The only setting that helped was muting the left side. Not really a solution...
    In snowleopard everything works fine.
    Perhaps anybody can help me.
    And sorry for my bad english.
    Greetings
    Andreas

    Hello BennB,
    Have you checked compatibility?
    Just an FYI for you.
    It is always best to check with the software manufacturer FIRST. They will tell you if they have tested the product and the version, as well as whether or not it will work with Windows 7.
    Check out the Windows 7 Compatibility site: (There you will find out about hardware and software compatibilty.)
    http://www.microsoft.com/windows/compatibility/en-us/default.aspx
    There is a pulldown from which you can choose "hardware" and "software".
    There are also some great articles, instructional videos and such to help with your Windows 7 at our Springboard site:
    http://technet.microsoft.com/en-us/windows/default.aspx
    In any event a lot of the times, Vista drivers will work in lieu of Windows 7 drivers, however, it's not 100%!
    As stated previously, it's best to have the Windows 7 certified drivers installed.
    Microsoft does have an official Windows 7 Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to check the threads available there for additional assitance and support.
    Thanks again,
    John M.
    Microsoft Windows Client Support

  • Gigabyte EP45-UD3P Audigy No Sound in Windows 7 (64-bit)

    Hi,
    I just installed windows 7 64bit. I have a sound blaster audigy as installed the latest drivers from creative (SBAX_PCDRV_LB_2_8_00.exe). I get no sound out of the card at all. Device manager shows the device is working correctly. I have also picked it as the default in the sound settings. No sound at all.
    Running a Gigabyte EP45-UD3P wtih 8gigs of ram. This board has onboard audio which I disabled via the bios. Still got no sound from the audigy.

    Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
    Seems like most people don't like this start navigation sound, but I do.
    I don't like the fact of having to disable soundblaster enhancements also.
    Have you noticed that if you change the windows theme to something else it will actually work?

  • Satellite U400-15E - Upgraded to Windows 7 32-bit now NO sound through HDMI

    I upgraded from vista to windows 7 32-bit, now i have no HDMI device shown under playback devices, i have installed new windows 7 drivers but still no luck. Under device manager/sound a HDMI device is shown as enabled and when connected to an external TV video is shown but no HDMI sound. please can someone help......

    I have found out the solution to get HDMI sound to the TV
    1. Right click volume icon on taskbar
    2. Select playback devices
    3. Right Click on SPDIF Interface and select Default Communications Device.
    4. Connect HDMI from TV to Laptop
    5. HDMI Device should be selected automatically.
    When HDMI is disconnected the HDMI device is shown as disabled in playback devices whereas previously this device wasn''t shown at all.

  • I have no sound on dv8000. Moved to Windows 7 64 bit. (error messaged;No media controller's)

    I have no sound on dv8000. Moved to Windows 7 64 bit. Windows XP was on very shaky ground (error messaged-No multi media controller's). Also, need mass storage controller driver. Where can I obtain the compatible drivers. It would be nice if HP did not abandon some of their products as they did this one. Finally, can I add 2gigs DDR 333 (pc2700 2.5 cas) instead of the 512 megs I have now. I will be grateful for any help.~~~~Cuba T    

    Don't blame HP....Conexant didn't develop 64 bit drivers for their audio chip.
    If you want to run W7 on that model, it will have to be 32 bit.  Then you use the Vista 32 bit audio driver--probably have to manually install it too.
    After you make the switch, install this card reader driver for the mass storage controller.
    It will also work on W7 64 bit but without any audio, I don't see the point.
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&sp...

  • HP pavilion dv6000 with windows 7 64 bit has no sound after disassembl​ed.

    Hello there,
    I have an HP Pavilion dv6000 and after i disassembled and reassembled it to clean the fan, the lap top has no sound. In the device manager an error on ''PCI bus9, Device 9, function 2 & 3'' was appeared but after i installed new drivers the errors was fixed and it was written that the device was working properly. but unfortunately the device is not working properly because i stills have no sound. I also disassembled and reassembled for second time to find out if the problem was minor like an unplugged cable but everything was completely fine. Operation system: Windows 7 64 bit.  Can someone please tell me what to do?

    Dragon-Phoenix wrote:
    I was looking for the driver download for the webcam in my laptop, the only drivers I found works on Windows XP or Windows Vista.... Please help me in downloading the web cam software that would work with Windows 7 ultimate.
    Looking forward for your fast reply
    Thank you
    Dragon-Phoenix wrote:
    I was looking for the driver download for the webcam in my laptop, the only drivers I found works on Windows XP or Windows Vista.... Please help me in downloading the web cam software that would work with Windows 7 ultimate.
    Looking forward for your fast reply
    Thank you

  • HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit- no sound

    HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit.
    IDT High Definition Audio CODEC Enabled stwrt64.sys 6.10.6289.0
    Intel (R) Display Audio Enabled IntcDAud.sys 6.12.0.3047
    Speakers show sound coming from internal speakers.
    Speakers and Headphones Properties show- No Tone Control installed–how do I get it?
    I have updated, deleted, and reinstalled drivers, from HP support help, no luck.
    Please Help!
    Thanks
    CJ

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us​...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 7 64-bit on A88X-G43 and have no sound

    I just replaced my dead Motherboard with an MSI A88X-G43, with an AMD A10-6800K and 2 4GB sticks of G.Skill Ripjaws X Series RAM.
    Main Board:    A88X-G43
    Bios Version:  E7793AMS V3.3
    Video Card:    On-board video
    PSU:               Corsair VX450W
    12v rail Rating of listed PSU:
    CPU:               AMD A10-6800K
    Memory:         G.SKILL Ripjaws X Series 8GB (2 x 4GB) 2133 (PC3 17000)
    SSD/ HDD:      Seagate Barracuda ST3120026A
    CPU COOLER: Stock
    Raid Card:      N/A
    Sound Card:   Built-in sound
    Any Additional hardware plugged into your system:  None
    OC: (Yes / No)        NO
    Operating System: Windows 7 Pro 64-bit
    1. Installed The Win7 Pro 64-bit OS
    2. Installed MSI board drivers ("Total Installer")
    3. Rebooted & got no Windows Startup "Song"
    4. Played some mp3 files - nothing
    5. Went to Investors.com (IBD site) and clicked on the Market Wrap video, which started playing, but there was no audio.
    6. Checked Device Manager and everything looks good - no ! next to any devices, giving NO indication that there is a problem - just no sound.
    7. Did lots of online searches and reading and found issues with the Realtek HD drivers and the KB888111xpsp2 update.
    8. Under Sound, video and game controllers, in Device Manager, Uninstalled AMD High Definition Audio Device & Realtek High Definition Audio.
    9. Rebooted and the system found the drivers and reinstalled them.  Still no sound.
    10. Put in a Technical Support Service Request with MSI.  Below is my exchange with them:
    End User   02/27/2014   I installed Windows 7 64-bit, installed the driver by clicking on the x icon. Things are working well, except my sound. I am getting NO sound from the headphone/speaker audio connection. I have connected known good speakers and known good headphones and am getting NO audio. I re-installed the Realtech HD audio driver and I still have NO sound. Please advise. Thanks you.
    MSI Tech.   02/27/2014   It has everything to do with windows sp3. There is a glitch where you cant install windows hotfix kb888111 because sp3 thinks its newer then the hotfix. all you have to do is manually extract the .inf file from the KB888111XPSP2.exe file and load it for the questioned pci device. it will then detect the realtek hd audio device and you can then install the drivers.
    11.  I have extracted the 2 files in KB888111XPSP2.exe and placed them in a folder on my PC.  However, since I have no problems showing in Device Manager and the Audio Drivers installed without any problems, I am stumped.
    A little background:  I am an Electrical Engineer by school and currently write embedded Software & Firmware, and often troubleshoot hardware problems.  I have put many PCs together, so this is not my first rodeo.  However, this problem has stumped me!
    Please give me some detailed info on how to get my sound working completely. 
    Thank you for your time!
    Jules

    * Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore

  • Windows 7 64 bit Sound Card Problem

    In January 2009, we had a 64 bit operating system problem http://forums.adobe.com/message/1015026#1015026. Our software, which was published using Version 6.5, was freezing on a customer’s computer on playing the first sound file, then if the sound file was by-passed, on displaying the first swf. The problem was eventually resolved by Mike Baker publishing our a6p file in Authorware 7, and this cured the fault. So we upgraded to Authorware 7.02 and since then no further problems ... until December 2010.
    We launched our Italian Course late November and had a not dissimilar sort of problem reported by a customer. He's tried uninstalling & re-installing the software but the fault keeps re-occurring. The computer displays a "not responding" message. Debugging, we discovered that the message appears when trying to play the initial mp3 file (fixed bit rate) … the program does eventually continue but without playing the sound file. It then keeps hanging (there are thousands of sound files in our course), and none of the sound files play: text & pictures are displaying normally. Eventually the program freezes and has to be killed with ctrl+alt+delete.
    The computer in question is a Dell Inspiron 580s, & the operating system Windows 7 Home Premium 64 bit. I’m awaiting details of the sound card & confirmation that his drivers are up-to-date but I presume they will be (Windows 7 default is to keep drivers updated). I haven’t got the customer to carry out basic tests sound file tests yet, but he indicates no problems with Media Player or with iTunes.
    Extras in our XTRAS folder include:-
    AWMP3.X32
    MIX32.X32
    MIXVIEW.X32
    NETFILE.X32
    SWADCMPR.X32
    VIEWSVC.X32
    INETURL.X32
    FLASHASSET/FLASHAST.X32
    The database for our Italian course is now in ProgramData. (previous courses, database was in Program Files and run in XP compatible mode). We’re having problems with this location with Windows 7 64 bit … it is maintaining a copy in Virtual Store and updating the file there. No such problem with XP, Vista or Windows 7 32 bit. I see this as an unrelated problem. We got the customer to run the software in XP mode but the problem was not corrected.
    We do have customers successfully running our software on Windows 7 64 bit operating system computers; we had a minor ODBC glitch reported recently from a 64 bit user.
    Any suggestions would be appreciated.

    Tom,
    I concur with Steve that this is probably system-specific. A couple of things you may want to try:
    1. Be sure you're using the Xtras that came with Authorware 7.02 and not 6.5. For example, I believe mixview.x32 and viewsvc.x32 were updated in Authorware 7.
    2. Try making a little AW program with 4 or 5 buttons that each trigger an imported MP3 file, where each audio file has different output settings (e.g. mono vs stereo, 64kbps vs. 92 kbps, etc.). Package it up and send it to the Dell user to test it. You may stumble upon an audio output setting that works on that particular machine.
    Steve Gannon
    GanTek Multimedia

  • How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds

    How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds it will only give me the option to choose wav?

    Windows 7 uses .wav (wave) files for the sound events. The default folder that Windows 7 uses to store the sound files in is located at C:\Windows\Media.
    You cannot use a MP3 file but there are lots of (WAV to MP3 converters) available on internet which can help you to convert MP3 to wav  serving your purpose of changing system sound. 
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

    Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
    Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Windows 7 - 64 Bit Driver Needed For Sound Blaster Live! 5.1 Model SB0100

    I am having trouble finding a working driver for Windows 7 - 64 Bit for a Sound Blaster Li've! 5. Audo Card Model# SB000
    I downloaded driver file SBL_PC64DRVBETA_LB_2_03_0005.exe which I think is a 64 Bit Sound Blaster Li've! update, but Windows 7 does not allow it to be installed because it is not a digitally signed driver. It also seems Creative is no longer supporting these old cards with new driver updates.
    I love the card though. I have bought more recent sound cards and the sound of this card is still much better than the more recent sound cards I have bought. So I would like to keep using it if possible.
    Are there any driver solutions?

    I recently answered about the same question:
    If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

Maybe you are looking for

  • Application export issue

    Hi, I have exported my application from one server to my new apex installation on another server. Export works fine but i don't have any more my pics downloaded in images in shared components. Can someone tell how can i get them? Thx in advance. Celi

  • Should I get a new router to get open NAT type?

    Whenever I play COD Black ops 2 on my xbox 360 my NAT type is strict. I have a centurylink 660 series modem and that is working to its full potential of the bundle we bought from them. I also have an airport extreme (2009). I Know theres all these po

  • My about:config changes for zoom won't take

    Changing the following: toolkit.zoomManager.zoomValues from 0.3,0.5,0.67,0.8,0.9,1,1.1,1.2,1.33,1.5,1.7,2,2.4,3 to 0.3,0.5,0.67,0.8,0.9,1,1.1,1.2,1.33,1.5,1.7,2,2.4,3,4,5,6,7,8,9,10 and zoom.maxPercent from 300 to 1000 but when I exit, the changes do

  • Store Moves to memory

    I have a simple twist on the hunt the Wumpus game where the object is to find a pile of smelly socks and then return to the starting position. My code is very basic and not the most intelligent agent but it gets the job done. the problem I am having

  • Portions of our site are currently unavailable.

    Hello, We get orders for our restaurant through the hpeprint.com service.  When the service goes down we do not reeive any notice.  The service appears to be down currently.  The web site has a message "Portions of our site are currently unavailable.