Sound Input will not stay put!

Hi, if i go to
System Preferences>Sound>
and change the input level to my desired choice for my built in mic on my imac g5 isight, well, the level will not stay the same.
I constantly use Ichat, and use the audio chat feature with a few friends.
And it bugs me cause I have to go to change my preferences every single time.
Is there a cure for this.
I would trash the sound prefereces p.list , but im not sure which one it is.
Anyone , can you shed some light on , a
small issue, but important to me.
thanks

I will need to select character by character with Hanin, while with Zhuyin, the system will render suggestions.
This page has some info on Hanin that may be helpful in doing more characters at once:
http://www.yale.edu/chinesemac/pages/tcim_x4.html#Hanin
As for the problem with the Zhuyin IM, I think it would be best to ask on the chinese-mac list and see if anyone there has run into this and found a fix:
http://groups.google.com/group/chinesemac/

Similar Messages

Palm Desktop entry will not stay put

Recent change, not sure why. Every entry or edit in the Palm Desktop Calendar drops into the previous day (ie: entry into Friday whe completed fall into thursday). I must drag it on to the day after the entry I want for it to stay where it belongs. I have used the Desktop for 3-4 years and never saw this before. Any suggestions?
Post relates to: Palm Z22

Hello!
Please make sure your PC does have the daylight savings update installed on your PC, ususally windows updates or macintosh updates takes care of this. Also for your device, please go to www.palm.com/dstpalm to see if you need the DST updater for your PDA. Seems like the symptoms your describing is fitting the bill.
Post relates to: Treo 650 (Unlocked GSM)
Post relates to: Treo 650 (Unlocked GSM)

Resolution will not stay put, changes at turn on after selecting "apply and ok"

When I set the resolution on display settings to the max on the slider scale, then select apply and ok and select to keep this setting, every thing works as it should until I shut down and restart the laptop.Upon restart or startup, the resolution goes back to a lower resolution and all is distorted, then I have to go back into control panel, personalizing, display settings and reset the resolution to max. This happens almost 100% of the time but not always. Very annoying behavior..
Any help would be appreciated to keep the resolution set and stop this tiring/annoying routine
System is Vista..
Chuck

Try placing the iPhone into recovery mode.
If this is successful, this will require restoring the iPhone with iTunes. Do so as a new iPhone or not from the iPhone's backup.
http://support.apple.com/kb/HT1808?viewlocale=en_US

My iMac 10.6.8 will not stay asleep. It keeps coming back on seconds or minutes after I put it to sleep.

My iMac will not stay asleep. A few seconds to a few minutes after I put it to sleep, it comes back on.

OK, a few more things coming to mind:
Set the energy saver to sleep in 1 min
Diconnect every single peripheral you have connected to your iMac
Eject any DVD/CD you may have in the drive
Turn off all applications you have running
iTunes or DVD Player could be waking it constantly up if accessing your drives
Messaging apps could be looking for internet connection
Disable Wi-Fi
Disable Bluetooth - you don't have cells paired to it, do you?
Disconect Ethernet cable (if connected)
Spotlight - is it indexing your drive? (a dot within a magnifying glass would be pulsating and won't let your Mac go to sleep)
Connect a wired mouse - if you have it - and go to Apple menu then click SLEEP
If it remains asleep, keep adding all apps, devices and services back until you find which one is causing it.
If nothing helps, then I'm out of ideas....
In case you have Apple TV - the remote can indeed make it wake up.

Iphone will not stay connected "invalid response received from the device."

I have an older iPhone (8gb) and for some reason whenever I plug it into the usb port on my computer it will not stay connected whatsoever. Itunes freaks out, it'll come up for a little bit and then just as soon as it appeared, 'Josh's iPhone' disappears. When I say "won't stay connected" I mean you'll hear the "new usb device" sound over and over again continuously and the iPhone goes crazy too. Like it's connected, disconnecting, connecting, disconnecting, etc.. The error I get during all this madness is "itunes could not connect iPhone because it received an invalid response from the device."
I've used this ( http://support.apple.com/kb/ts1286 ) link to no avail (yet.) I am about to restart my computer right now. If it works after that I'll just simply delete this post. But anyway it's in a usb 2.0, it's plugged directly into the computer, etc etc
Also I'm not sure if this has anything to do with it but I put ringtones on the phone as well, I tried adding about 5 or 6 of them through itunes and it only uploaded two of them, except one of those two appears FOUR TIMES.
Thanks in advance for anyone who can help!

Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
-I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
-I add them to the "ringtones" section under "Devices"
-ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
-I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Why on Earth could this be?

Mid 2010 Macbook Pro will not stay off or asleep

Hi,
I have a mid 2010 MacBook Pro will not stay turned off when I tell it to shut down. It will shut down just fine, but a few seconds later it will boot up again. This also happens when I try to close the lid (or just put it to sleep), it will work fine, screen/Apple logo on the back will turn off and the status LED will slowly pulse. However a few seconds later, the LED stops pulsing and the Apple logo will illuminate. If I open the lid I will be greeted with the log in page with zero delay (i.e. its been displaying for a while).
This has become problematic because the computer always be running. If I put it in my laptop bag the computer will get hot as ****. The only way to get it to really turn off is to let the battery die or remove the battery. But this computer does not have the externally removable battery so that is not a trivial process.
The symptoms exist in both Mac OS (Mountain Lion and Maveriks) and Windows 8/8.1. This makes me believe its something in the hardware (or at least a setting in the hardware), not software (I know Apple doesn't care what Windows does, but it is exibiting identical behavior).
I have reset the NVRAM and the SMC with no luck. When I reset the SMC I didn't get a good indication that anything happened though, and was wondering if that is normal. Resetting the NVRAM results in another restart, while its hard to tell if you actually reset the SMC. I reset the SMC by turning the computer off, then holding the power button when it tries to restart (this usually gives me a few minutes where the computer will actually stay off), then pressing shift, control, option and power at the same time and releasing them at the same time. This is how the Apple documentation said to do it. They did not mention how long the must be held though so I presume that doesn't matter.
Anyone experience this/have any ideas?
Thanks,
Jim

Btmm error "can not coonnect to cloud server" Facetime and IMessage " Could not sign in, check your network connection and try again". Which I have again and again...

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

F2105 HP Monitor Will NOT Stay Awake

Failed to awaken when W8 computer did.
Have tried the monitor on W7, XP, another W8 computer and a Mac OsX - on all of which the monitor had previously worked.
When the monitor is first hooked up (VGA, DVI) or turned on the monitor shows the expected display for about 3 seconds and then announces that it is going to sleep due to no input.
The menu button does nada. Nor does holding down either the power button or the menu button for 2 minutes.
I see reports of this on the forum going back to 2010, but no one seems to have solved the issue that I can see.
To me it seems that it might well be a firmware issue on the monitor's board. Does anyone know how the firmware can be rebooted or replaced?

Hello @PanzerFaust,
I understand that your HP f2105 21 inch LCD Monitor will not stay awake and you are looking for a resolution to this issue. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. If it does I think it would be best if you contact HP Technical Support for repair options.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

TS4000 When I create a reminder the date/time will not stay attached to the reminder. It initially sets then drops off. Any ideas?

When I create a reminder the date/time will not stay attached to the reminder. It initially sets then drops off. Any ideas?

Sounds like we have a similar problem. Four days ago I was playing music through a wireless Bose speaker via bluetooth and everything was fine. Then I was texting while listening and got 2 texts about the same time as I was typing one and my phone went black. I pushed the home button and it worked, went into my texts and all were there. However ever since then the time isn't right, so it can't keep time no matter what I do. The bluetooth works only at times, the wifi keeps jumping on and off, sometimes my data won't work and the other day I couldn't even turn it off, so had to wait until it died. The battery life display at that moment wasn't correct either. Took to Verizon, they couldn't help. Suggested a factory reset, which I did last night and still the same issues! One day I couldn't even text my husband on his iPhone. Just wouldn't work at all. Did everything suggest and still not good. Seems like after stalking these pages today a lot of people are having this problem in Dec/Jan and of course also I'm 3 weeks out of my 1 year warranty and so were many others, by days. Very strange, and all on the 5C. What did you do? Is it working now?

In "View Options", "iCloud Download" will not stay declicked. How can I get rid of it?

In iTunes 11.0.1 (12):
1. under "View Optiuons", "iCloud will not stay declicked. How can I get rid of it?
2. when I go to "albumns" can i get a list of what I have put in that field on each playlist, instead of a sea of empty graphics?

You can download your movies and tv shows to your iTunes library (depending on your location) as explained here: http://support.apple.com/kb/ht2519.
What you are seeing is "iTunes in the Cloud", which is a separate service that allows you to download previously purchased media from the iTunes and App store. This does not require setting up an iCloud account so it's likely you don't have one. (If you don't want to see this previously purchased media available for download in your iTunes library, you can open iTunes and go to Edit>Preferences>Store and uncheck "Show iTunes in the Cloud Purchases".)

Windows Will Not Stay Selected

Menu bar app windows, as well as other windows will not stay selected. To type on some of these windows, I have to click on the window after every letter or else it will become unselected.

vanborki, welcome to the forum,
it sounds as though you have a corrupted userinit.exe file as safe mode also insn't working. Have you also tried last known working configuration? You could try replacing the file, google can help here.
Worst case is that you have caught some spyware, this will not only have corrupted your userinit.exe file, but also changed the registry entries. There are methods of fixing this using BartPE boot discs.
Your drive will be accessable allowing you to attach it to another system and copy your important files. A system recovery may be the easiest option to get your ThinkPad up and running again.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

My iPad just randomly stopped having sound and will not shut down only restart.

my iPad just stopped have sound. Only works with ear-buds. Also, now when I power it down or even force it, will only restart & will not stay shut off. I have done the whole mute/lock thing, did a reset & even backed it up & restored it. Anybody have any suggestions?? thanks!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

I've installed Mavericks on my Mac Pro. It works well, generally, but will not stay sleeping! Pressing the power button twice sometimes extends the sleep mode but even that seldom results in a full overnight sleep. File sharing off. What else can help?

I've installed Mavericks on my Mac Pro. It works well, generally, but will not stay asleep! Pressing the power button twice sometimes extends the sleep mode but even that seldom results in a full overnight sleep. File sharing off. What else can help?

Hi fremley,
Thanks for visiting Apple Support Communities.
This article may be helpful with determining why your Mac Pro doesn't stay in sleep mode:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
Some things reset the sleep timers, preventing the computer from sleeping:
Hard drive access (even if you're not using the computer, a running application might be accessing your drive, such as when downloading a large file or listening to music in iTunes)
Moving the mouse or using a portable Mac's trackpad, pressing a mouse button, or pressing a key on the keyboard
Some System Preferences settings (see below)
Open applications (see below)
Input devices (see below)
Expansion cards (see below)
Additional drives, such as USB, FireWire, DVD, or CD drives (see below)
Best Regards,
Jeremy

HT4528 I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

Iran uses GSM, so the iPhone 5 will work. It is already unlocked. Just put local Iranian SIM in phone.

HT201335 The airplay icon will not stay in my control bar!

The airplay icon will not stay in my control bar and when activated and turned to mirroring nothing shows up on my tv. I have airplay on, on my appleTV. So I am out of ideas and I cannot find anything on here to help. I am using my iPad air and it along with my appleTV are all up to date. I also just checked my iPhone 5 and it is not in the control bar as well. I have even restarted the iPad and it will show up just long enough for me to turn it on but nothing shows on the tv and when I go back to the control bar it is gone. I hope someone can help.

Hey Thebassbuilder,
Thanks for the question. Based on the information you have provided, it sounds like the issue may reside with your Apple TV or network, since it is reproducible on two devices. To continue troubleshooting, I recommend the following articles:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Thanks,
Matt M.

Sound Input will not stay put!

Similar Messages

Maybe you are looking for