Sound is cut off when iPod is connected to PC via USB?

Is this a normal behavior?

How is this normal? It's not even mentioned in the User Guide. Hmm... is it bcos of noise if the sound is uncut when linked to PC?

Similar Messages

How can get the touchpad turned off when my logitech mouse is plugged via usb. when I used control panel to turn off tp it says it is disabled.

both touchpad and mouse are active even though the touchpad is disabled

I am saying that the touch pad still is active/turned on/ works, even though it is disabled according to the menu screen that I reach through control panel. It works all the time, in any program I am using. My latest attempt is to delete the software (Alps vers. 7.1207.101.225) but I see that has not worked either. I'm a poor typist and need to watch the keyboard and my thumbs touch the pad and send the cursor and current words somewhere other than the line on which I am trying to write. Very frustrating.[

TS1363 Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

Which OS are you using?
In the meantime, research your problem in Knowledge Base.

How can I set up my iphone as a pager when my sound is cut off?

How can I set up my iphone as a pager when my sound is cut off?

Nbt24vs wrote:
I had a droid before that I used as a pager. I found an app that would allow me to tell my phone even if its in silence mode if I got a text from "??" whatever then beep/sound off anyway. Since there are so many more apps in the Apple world I cant beive there isnt an equivalant app.
When the sound is muted, all notifications are muted. Because of the greater inherent security in iOS than Android, an app such as you describe is not possible. There are no apps that can selectively override the mute. App developers do not have access to those system functions.

Nano cuts off when screen goes black

Hi,
I recently traded my nano in for a 6th gen under the replacement program, it's been working fine up until now.
Whenever I press the hold button briefly to lock the screen the sceen goes off as it should but the sound is killed. Also if I don't touch the hold button at all it will play quite happily until the energy saver kicks in and the screen goes off, again no sound.
Any ideas?

think I might have fixed it.
The headphone jack had some debris in it, not much at all infact only the smallest spec of stuff. Unless the jack is seated completely, and I mean completely the ipod thinks there isn't any headphones connected and reverts to apower save mode where both the screen and sound are cut off.

Beginning of audio cut off when using digital optical out

Hi all,
This is my first post here since switching to Mac earlier this year.
I'm having problems with the first second or so of audio being cut off when commencing playback using the Mac's digital optical out. This happens with any source of audio in a variety of different applications (e.g. video, iTunes, even system sounds for notifications and the like). I have used a mini Toslink to Toslink optical cable to connect from the Mac's audio out jack to the receiver of my digital speakers (Logitech Z906). Once playback has commenced, audio plays fine; it's just the very first second or so which is usually clipped.
The problem does NOT happen when using the built-in speakers. I've also noticed that if I unplug the cable from the receiver end (leaving it connected at the Mac end) I can see the red LED light shining the optical signal down the cable, but this goes out exactly 30 seconds after audio stops playing. If I start another audio playback within 30 seconds, there is no loss of audio at the beginning, but if I wait longer than 30 seconds (i.e. after the LED has gone out) I encounter the problems with the initial audio being clipped. I therefore suspect that this is an OS issue which is shutting down the digital optical out when audio is not actually playing (presumably to save power or something). I wouldn't have a problem with this if it actually worked properly when audio playback recommences, but it seems that there is a slight delay whilst the optical out service 'wakes up' again and this is leading to the clipped audio.
I've done some searching of the internet (and these support communities) for this problem and there seems to be little information about it. It does seem to affect a few other people though and some have resorted to third party applications or scripts which play silent audio at regular intervals to keep the optical output running permanently (e.g. SoundStay (https://www.macupdate.com/app/mac/39833/soundstay) - no longer maintained and the download link is dead). However, these amount to a kludge at best which treat the symptoms rather than the underlying cause, which I would rather resolve.
I tried to log a support case with Apple in order to have them call me, only to have the system tell me that my support has already expired, despite having purchased the Mac only 4 months ago. It seems that my Apple One-Year Limited Warranty is actually only 90 days when it comes to telephone support. So here I am!
Does anyone else have this problem with optical out, and how can I resolve this? Any help would be gratefully appreciated.
Thank you.

Hello kcore66,
Would it be possible for you to upload one of the files in
question so that I can take a look. In Captivate 1.01 there is an
intermittent problem where sometimes the audio is either cut off or
just doesn't play when you publish / preview. To get around this
simply moving the audio object back and forth along the timeline
and then positioning it back in it's original position works 9
times out of 10.
HTH
Regards,
Mark

30seconds to 2mins of song cut off on ipod

I have a really really werid error, when I first got a 5G ipod, about 1/12 of the songs were 30seconds-2min shorter on the ipod and had there ends cut off, when I played them with itunes off the ipod however,they played fine (full song). I dismmised this as a defective ipod, returned it, got a new one, used it with no problem for 2 days, and then found a song with 32seconds of the end cut off. I synced it with itunes, and it didn't fix the problem, it only fixed the song after I listen to it all the way through on itunes, and synced it again. Based on my previous experiance I think there are more songs on my ipod cut off like this. Any suggestions on how to fix this, or how to test to see if more songs are cut off without listen to all 2400 songs on it

I have the same problem. I have a 15 gig 2G ipod and I replaced a dying 20gig 3G ipod with a new 60gig 5G ipod. Other than the harddrive dying in the 3G (I did get over 7000 hrs out of it!) I have never had any of the 6200 songs I have loaded ever have an error or skip like this. I've reripped 2 songs and they now have no error, but it seems like a cascading error (replacing the 2 songs seemed to cause 3 more to fail that didn't 2 days earlier) I have two questions: 1) Is this just a glitch in the error trapping of the driver software (meaning I can hope for a reprieve! with the next release) or 2) After restoring and reloading everything on the 5G and testing the tracks that skip on the 2G can I assume I've gotten a bum drive 3 days into owning my new pod?

Toshiba Portege S100-S1133 Laptop - Intenet (Cable or Wireless) cuts off when phone rings

Toshiba Portege S100-S1133 Laptop, Intel(R) Pentium(R) M, processor 1.73GHz 795MHz, 512 MB of RAM. Internet (cable or wireless - COMCAST service) cuts off when the house phone (AT&T service) rings. The HP Laptop in the house doesn't have this problem. COMCAST can't fix the problem.

The only way to fix the problem entirely is to not have any 2.4GHz cordless phones in the house. You can try to change the wireless channel on your router but it probably won't be far enough from the 2.4GHz phones to help. I assume when you say it shares internet you mean that your home computer is connected in the back with ethernet and that is why the internet stays up on it. Your MBP connects wirelessly so it disconnects when the phone is in use.
Go to 192.168.1.1. Log in by leaving username blank and password is admin. [Follow these instructions|http://www.tutorial5.com/content/view/155/79> to change anything you need to (such as if you have unsecured wireless). Click wireless and under basic wireless settings you probably have channel 6 by default. Try channel 1. (Though you can also get into problems with wireless networks of neighbors interfering so download [Airport Radar|http://www.apple.com/downloads/dashboard/networking_security/airportradar .html] and try to avoid channels that are nearby).
As I said the only solution is not using 2.4GHz phones.

Itunes will not start when ipod is connected

3G nano ipod when connected to windows xp,, Windows Expoler opens and shows ipod as "M" drive. But itunes starts only when I click icon on my desktop and dose not start when ipod is connected. When itunes runs it sees my ipod and all works fine. I have the box under Devices checked to start itunes when ipod connected. Thanks for your help

Hello Loggroller,
And welcome to Apple Discussions!
Are you talking about the *Open iTunes when this iPod is connected* option from under your iPod's Summary tab? If not, make sure you have this option ticked as well.
It might not hurt to try and remove and re-install iTunes and all Apple related software using these instructions.
http://support.apple.com/kb/ht1925
B-rock

When Ipod is connected to Itunes all music can be seen, but when disconnected, the ipod appears as if there is no music. Hasn't happened to the movies. Help?

When Ipod is connected to Itunes, music that is used to have is listed, but, when disconnected, the ipod appears as if there is no music. Hasn't happened to the movies. Anyone have any ideas?

Since you did not mentioned about sync issues or problem, error messages.
You have to Sync the iTunes library with your iPod.
Refer to this tutorial, on syncing iPod
Have a nice day!

ITunes does not start automatically when iPod is connected

iTunes used to start automatically when I connected iTunes. It no longer does. Can I fix that?
Dave

Connect your iPod and open iTunes. Towards the bottom of the iPod screen, there are four check boxes. The top one says "Open iTunes when iPod is connected." Check that box and click apply. If it is checked, uncheck it and click apply, eject and reconnect your iPod, then recheck it and click apply.

ITunes doesn't start automatically when ipod is connected.

Even though I have clicked on the place that says itunes will start automatically when iPod is connected to pc, it doesn't. I have to click on iTunes everytime, and then it takes a while to run.
Anyone have any ideas what might be the problem?

hi joyful!
just checking. reboot the PC, and prior to launching itunes or plugging in the ipod, bring up your Task Manager to the "processes" tab.
is there an iTunesHelper.exe running in your processes?
Background processes installed with iTunes 6 for Windows
love, b

Titles get cut off when playing after the burn

The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
Any help is appreciated.

You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

Having itunes open when ipod is connected

Nano 4th generation--iTunes always opened when iPod was connected to computer; now it doesn't and going to Devices and scrolling down Summary to "open when ipod is connected" is greyed out and will not allow me to check it. Even going to the iTunes preferences does not offer this selection.

You meant that you can't place a check mark in the check box "Open iTunes when device connected" ?
Just do a little test: Click on Music and see if you can put there a check mark.

Itunes wont automatically open when ipod is connected

Hello there
basically the above ^^ itunes wont open automatically when ipod is connected ive tried the 5 steps and ive also tried the whole tray and exit thing its not WORKING!
all help much apprciated thanks

I have a interesting hunch that somehow Windows is doing something to you...
One thing you might want to see is if within Windows if the iPod service is running... As there are certain services which automatically get installed when itunes is loaded. These notice the device and loads the app..
Just for reference, here are my Windows Services and their status:
Apple Mobile Device - Started & Automatic
Bonjour - Started & Automatic
iPod Service - Started & Manual
I thought that a 4th service existed, but can't find it...
Have you tried uninstalling iTunes and downloading to reinstall it again, that might help.. Or else it has something deeper do to with your computer itself!
That's about all I can offer right now.

Sound is cut off when iPod is connected to PC via USB?

Similar Messages

Maybe you are looking for