Sound is in sync in imovie '09 but off in idvd when using alternate speeds

I'm working in imovie 09(8.0.6) and everything seems to be working fine such as transitions, effects, speed, etc. My project looks great in the imovie viewer. I'm finished with all the editing, when I get to IDVD(7.0.4) and preview it, burn it, or save as disk image then toast it sound from the back end of the movie/video can be heard near the begining. All my software has been updated!!! On my last project everything worked fine. What could have caused this?

If you are using fast motion or slow motion, be sure to stick with the preset tick marks of 12.5%, 25%, 50%, 200%, 400%, 800%. Using a custom percentage like 133% or 42% will produce random audio errors.
iMovie 11 corrects this by forcing you to stick to the tick marks.

Similar Messages

I have iPad with my id linked to emarati stores, but off late I am using it in India. Now if I am going to iTunes to purchase a app it is now doing . Please tell me what should I do . Thanks

I have iPad linked with my id linked to emarati stores but off late I am using it in India . Now when I go to iTunes stores to purchase an app it is not allowing . Please help to solve the problem ?

What happens when you try to buy/download an app, do you get any error messages ?
If you are getting a 'not in this store' message then try going to the bottom of the Featured tab in the App Store app on your iPhone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select your country.
If it's a different problem ... ?

U/tube videos open when using Safari but will not open when using Firefox.

u/tube videos open fine when using Safari but will not open when using Firefox. With Firefox I get the unhighlighted Quicktime symbol with a question mark in the center. WHY?? Any help appreciated --- Toroya

Hmmmm, strange you view YouTube in Safari & not FF. Which version of FF are you using?
Try the following:
Repair permissions & restart.
Make sure you have the latest versions of Adobe Flash Player Software
QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
Deactivate the "Flash Media" option.

Sound out of sync after iMovie '11 upgrade

I have a project nearly an hour long made in iMovie '09. I just upgraded to iMovie '11 and now the sound is out of sync with the picture. It gets progressively worse the longer into the movie you go. I discovered this when I went to do more work on the project. The sound and picture were perfectly in sync in iMovie '09. I don't understand how Apple can release an upgrade with no warning that it will destroy all your previous work. What happens now?

I just finished testing a "fix" for this. Go to the App folder and delete the iMovie file. Take the iLife 11 disc and run the installation. This will take you back to the 9.0 version of iMovie. Just be careful not the upgrade iMovie when Software Update runs. I've done this and everything seems to be back to normal on the tests I've run. If you don't have iLife 11 disc and your copy of iMovie came on your computer, you will need to figure out another way to go back to the earlier version. But if you do this, at least you will be up and running until Apple releases an update that works! Good luck!

When using FireFox I often cannot view pictures in Hotmail, but have no problem when using other browsers

When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers

Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Select: [X] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords

My Hotmail login details only save in IE, but do not retain when using Firefox as broswer. There seems to be something in FAQ's, but can't resolve

When using IE, my Hotmail details, always save for next login (using the "keep me logged in" tick box).
Using Firefox to open Hotmail, my details are never retained and (using the "keep me logged in" tick box also), I have to put full details in each time, rather annoying....does Microsoft do this on purpose to retain IE users?
As mentioned above, there does seem to be something in the FAQ's, but even following this, i can't seem to get this to stop happening, so whilst wishing to use Firefox more often, for Hotmail access this is a bit of a pain!!!

I'm not sure whether such Hotmail features work with Firefox.
Websites remembering you and automatically log you on is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
Do not use Clear Recent History to clear the "Cookies" and the "Site Preferences"
* https://support.mozilla.com/kb/Clear+Recent+History
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Eprint is turned on but will not connect when using the apps icon on the printer LJ Pro CM14151fmw?

LJ Pro CM14151fmw
systems that use this printer have Win7 32bit/ win7 64bit and windows xp 32bit. (via network)
tried updating the firmware - rebooting - manual ip vs dhcp - registered the printer - removing e-print - power cycle - adding e-print.
also forwarded the ports and added to dmz - no go... added googles dns instead of my isp. no change.(connection error)
but the printer will print any e-mail thrown and it shows on the eprint website as connected.
router is a d-link dir 615 rev b (old but reliable)
printer is not using wireless - wireless is off on printer.
printer is connect by cat5e cable.
Any ideas
regards,
Barrett
PS - brand new printer (hooked on on dec 6th 2011)

Hello,
Thanks for the post! If you have not already, I might recommend following this link and posting your question there:
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
Good Luck!
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

How can I delete e-mails from one IPad without removing them from other IPads on same icloud? I'ved tried switching off mail sync on all devices but this only works when deleting on IPhone

We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
We don't want this, but at the same time we need to keep our devices clear of clutter.
It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
anybody got any better ideas ??

We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
We don't want this, but at the same time we need to keep our devices clear of clutter.
It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
anybody got any better ideas ??

I HAVE TIS NOISE IN MY IMAC AND IT DOES NOT SOUND LIKE THE FAN BUT A SWOOSHING FRYING SOUND THAT LASTS FOR ABOUT 3 SECONDS BUT NOT EVERY TIME I USE THE IMAC. LIKE THIS TIME, I'M ON IT FOR 45 MIN. & IT DID NOT HAPPEN. ?? WHAT IS IT ?

I have had this imac for one year and 2 mos. recently I hear a swooshing noise like speakers are frying when I power up and again intermittantly which lasts about only a few second and quiets down by itself. I have mt portable DVD drive unplugged, I turn down the volumn on the imac but it makes no difference.
I don't have applecare so I guess I should take it to the local apple store in Santa Monica ffor them to check it out. But it could be that it wont do it when you expect it to happen ???
Is anyone familiar with this sound ?

Could it be the hard drive making this noise?
Or could it be the fans?

Apple TV Syncs Content from Mac, but cannot access it when the Mac is off

I scanned the forums for a few hours and didn't see any answers to this question, so here it is.
I sync'd the movies and pictures on my MacBook Pro to the the Apple TV; however, when the Mac sleeps, I cannot play or view the content on Apple TV until the Mac wakes up and reconnects to the network.
When I go into iTunes and select the Apple TV, the content clearly shows up (15 GB+). I view Activity Monitor while movies play, and it appears to be playing the locally sync'd content because network utilization is almost zero. But, it insists on my MacBook being up with iTunes running.
Has anyone else seen this?
Thanks for any ideas.
Ben
MacBook Pro Mac OS X (10.4.9)

OK,
Forget about iTunes, I am talking about the actual Apple TV itself.
On the TV screen in the main ATV menu you will see a list - Movies/TV Shows/ Music.....ending with Sources.
At the very top of this list you will either see a large ATV logo, or you will see the name of your iTunes library.
If you see your iTunes library name - the reason you can't access anything when your computer is asleep is because this source is for streaming from your computer only. Scroll down to where it says Sources, select it and in the next menu you will see the ATV logo at the very top of the list - select it and you can now play the content that is stored on your ATV.
Good luck!

Sounds Great in Logic 7.2 Express, but not so much when bounced to AIFF

When I play my track in Logic it sounds great, but when I bounce it and play the .aiff it doesn't, it sounds less dynamic, not as rich.
Can someone give me some advice/tips about bouncing? What are the best settings for the best sound quality? The track well end up on a cd.
Thanks!
You can listen to the work in progress here (levels are not finished and this is an mp3):
http://www.djgecko.com/mp3/05yesterdaystomorrow.mp3
Dual G5 2.0 Mac OS X (10.4.7)

Hey B,
The track seems fine dynamic wise, (apart from some audio clicks here and there). Are you using any audio interface? If yes, that can be the cause, after bounce you probably earing from the mac output.
If you're recording at 24 bit (44.1KHz), use dither at bounce, to have a nice 16 bit.
You can also use the mastering plug-ins on the Output 1-2, on channel strip, click on the inserts arrow>logic express>mastering and choose>final master pop or dance to see wich one you like best. This loads a bounch of plug-ins at the master that will give a nice push to your mix. Watach the levels if it's too hot, bring down the compressor gain.
Best regards,
Jorge

Import a clean MP3 file, but can hear clicks when used in Captivate

Hi there,
I am having a problem with Captivate and wondered if anyone
could offer some advice. I have done some audio recordings and
import them into Captivate. However, when I listen to the files
from Captivate, the audio quality is much worse with audible clicks
that were not present in the original audio file.
I have tried importing WAV and MP3 files and changed the
settings to CD quality, but am still experiencing this problem. Can
anyone advise me how this problem can be eradicated?
Thanks
Mo

Welcome to our community, Mo
Do the audible clicks sound somewhat like mouse clicks? I ask
because it's common for Captivate to make a clicking sound as it
moves from slide to slide. For example, if you create a new blank
project with perhaps three or four slides and simply preview it, do
you hear the same clicks? If so, there is a way to banish that.
Take a look at the following link:
Click
here.
Cheers... Rick

My MacBook Pro is admittedly old (2009) but suddenly very slow when using LR4

I don't hve the fastest computer, admittedly. But dowloading raw pics cand take ten minutes per picture. I am downloading to an external drive - is that the problem, or do I simply need to get a more modern/ faster computer?
I typically shoot in raw and export jpg versions..
thank you so much to anyone who steps forward to help answer my novcice questions

Thanks Butch, I do have large sized images - in the 28 MP range. And my laptop was 4GB with 256 memory.
To avoid clogging up my hard drive, I was keeping the photos - about 4,000 of them on a separate portable drive, a 1TB MyPassport for Mac drive with - indeed, a USB2. So it sounds like the size of my images and this slow transfer is probably a big part of my problem.
I have just upgraded my macbook pro to a new 15" 8GB with a 256 SSD. And I would like to set up properly. I still would prefer not to have all the photos reside on my hard drive. I also have an iMac with a much larger drive, so I guess I could keep the catalog and the photos on it instead - but I don't like to work in my basement space where the desktop is....thus why I've been using laptop.
Any suggestions would be most welcomed. I also have a rather large inventory of previous photos that are in jpg format to be moved from iPhoto. But that is a question for another day. My immediate challenge is to figure out a workflow that is not too slow but does not eat up my hard drive. Danielle

I cannot access online statements for my credit card account when using firefox, but have no problem when using safari.

When I attempted to check the monthly statement for my credit card account and clicked on "See statement", the next screen that appeared, which was labeled Online Statement", was blank. In the past, I have never had any problems with this. When I checked with the bank that issued the credit card, the representative I spoke with said that it was a browser issue and that, since I was working on a Mac, I should try using Safari. When I switched to Safari, I had no problem bringing up my statement. But I would prefer to be able to use Firefox to obtain information like this, since it's the browser I always use.

Can you upgrade your browser to Firefox 12 and check?
* getfirefox.com

I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in uk

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

Sound is in sync in imovie '09 but off in idvd when using alternate speeds

Similar Messages

Maybe you are looking for