Sound is lower than sound in lion os

hi
I'm having a problen with the sound in Mountain Lion os. It's lower than Lion os
Do you have the same problem?
waiting your responses

Hello,
I didn't notice a problem with the sound.
- Did you check the Sound pane in System Preferences, if everything is OK ?
- Which Mac do you use ?
- You can also try to reset the PRAM : http://support.apple.com/kb/PH11243 (do it twice to be sure)
Hope this helps.

Similar Messages

  • How to set MTU lower than 1280 with Lion

    I am trying to set my MTU to 900 in order to play video games on my computer (this has been a known fix for many who have university network) but lion made it so you can't set your MTU to lower than 1280, or at least not easily.
    If you don't know what i'm talking about, under network in system preferences, if you click on ethernet (or wifi) and go to the hardware tab, change it to manual, u will see mtu on the bottom with a (1280-1500).
    Thanks

    Thanks for the reply,
    We need to set MTU to below 1280, but its not allow to set below 1280. Any other way will be helpful for us.
    Regards,
    Ashish

  • When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

    When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

    Hi! I have the same problem when I use my headphones .
    iPhone 4s England, iOS 6.1.2

  • Why is the Lumia Icon's ringtone lower than when previewing the ringtone in settings/system/ringtone sounds? (The volume is set at 30 in all cases.)

    Why is the Lumia Icon's (929) ringtone lower than when previewing the ringtone in settings/system/ringtone+sounds? (The volume is set at 30 in all cases.)

    Hello Lena,
    Yes, tried all those things.
    After going back and forth with Verizon's "tier 2" technical support over the last 2 days, a chat session with Nokia, no call-backs-as-promised by your technicians, then having them reinstall the phone's software -that didn't fix the problem. So they are sending me a re-manufactured replacement phone. But not a NEW ONE, because I didn't realize the problem within 14 days. You see at first, I just figured the phone had lousy volume, until I was previewing ringtones when setting the alarm clock. The phone is about one and a half months old. I have expressed my desire that a NEW phone be sent, but NO says Verizon.
    I've spent enough time, in good faith, Verizon would solve this matter, but in the process of their re-installing the software they've screwed up Backup Assistant.
    Thanks.

  • When i put external speakers to my g72 there's sound but it's lower than if they weren't plugged in

    This question is for a HP G72 laptop running Windows 7. When I plugged speakers into the headphone port the sound coming through is actually lower than when no speakers are used? What's the fix!

    Hey fisherking,
    I see that you're having an issue with the sound when you plug in speakers.
    Try this Document and follow the steps toward the bottom starting with the section " select desired speakers or sound device". 
    THX buddy

  • Low volume/sound output...

    After applying the updates (iTunes(6.02) & OS X (10.4.4)) the volume on my iMac seems to be a lot lower than it was before. I now have to turn the volume up more than half way to get the same output I used to get when the volume was only turned up a quarter of the way.
    Has anyone got any ideas please???
    Things I have checked/tried so far:
    * Reset PRAM
    * Checked output volume in applications (mainly iTunes - also turned off sound check which is working by increasing the volume but that doesn't help because it was on before all the updates and the volume was louder)
    * I'm running my own speakers via the headphones socket, checked the connection which is fine
    * Checked the volume on the external speakers which has always been near Max
    * As a last resort I have tried repairing permissions etc but the volume is still LOW
    Really appreciate any input.
    Thanks
    -rvx

    I'm having the same problem. I, also, recently downloaded the updates for iTunes (6.02) and OS X (10.4.4). I just downloaded music from itunes music store, and really noticed the problem when playing music on my ipod mini and over airTunes. I, also, checked the preferences in iTunes. I'm planning on calling Apple for ideas. If I learn of something I'll list it here.
    Good luck.

  • Notification Sounds are low

    Over all the sound on the z3 is good. It's loud when turn up the volume on music and videos but for some reason the notifications tone is lower than when I select it to preview. I did check the audio settings and made sure the notification Sounds are at max. The clear audio etc. And it's seems like it's just a few notches to low. Anyone notice this.
    If you are in the sound settings and are previewing the tones I can tell they are much louder but when I choose one and save it as my tone it's lower in volume.
    Solved!
    Go to Solution.

    You should let Xperia Care know about this issue
    http://support.sonymobile.com/global-en/contactUs/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • SB Recon3Di -- all sounds pitched low, sound cuts out occasionally

    I can't find a **** lick of information about the Recon3Di anywhere, so here we are. It's all in the title. Every sound from startup onwards (through both speakers and headphones) is a note lower than it used to be, and for years now it's been going mute without warning, which I can only fix by restarting. I didn't do anything in particular before the pitch issue, and I don't even remember when the sound first started dropping out.
    All I can think to do is uninstall and reinstall audio drivers, but that hasn't gotten me anywhere. What is going on, how do I fix it, why is this sound card so obscure?
    Specs: M17xR4 Alienware, Win7, 64 bit.

    Thanks. Here's the content of PM for anyone with similar problems coming here from a search:
    This is an OEM (Original Equipment Manufacturer) that is custom-built for DELL Alienware. If you are looking for information, you should contact DELL for further support.

  • Music-sound on iphone is worse than sound on mac-book

    Is this problem only with my iphone?
    the music played with headphones on iphone is worse than i listen to the same music with headphones on my macbook.
    the music does not live on my iphone, the sound is hard and flat. (equalizer does not do anything, there is no difference)
    on the macbook the sound is fantastic, very clear, perfect base etc...
    anybody know how to solve?

    Same Issue (Sorry timgeers, don't have an answer yet)
    The sound quality on my iPhone is pretty poor. Before people tell me to buy new headphones, here are the tests I ran to rule out other variables.
    Used my Shure SE210 headphones to listen to an iTunes store bought song (Leather so Soft by Lil Wayne) on my iPhone. With EQ off/on and sound check off/on (so basically all options tried) the low frequencies sound like on a blown out speaker.
    To make sure it wasn't the headphone plug I tried the built in speakers. Same result.
    To rule out the head phones (even though the previous test kinda did that already) I tried my Philips'. Same problem.
    To compare, I listened to the same song with the same 2 pairs of head phones and the built in speakers on my macbook pro. Sounds fine.
    Long story short, I came to the same conclusion as timgeers, the sound quality of my iPhone blows when listening to bass. Any ideas?

  • I have an iPad 2 and external speakers work, but JACK for headset doesn't produce sound. If I wiggle, twist or adjust it, the earphones make a crackly and very low grade sound. Ideas?

    No aud. or sound when using wired headphones. If I constantly play with input jack it will produce a low sound or a regular sound but it's not of any quality worth listening. I have owned this iPad for over three years. It was purchased new.
    Happenings since 2013:
    Broke screen due to fall on floor 9-2013
    Screen replaced by techs on 10-2013
    Upon getting back iPad after being repaired discovered no WiFi on 11-2013
    Sent back to techs to repair issues with WiFi on 11-2013
    Received unit back on 12-21-13. I only checked WiFi. Unit remained unused for a few weeks.
    Used unit during Xmas season on average 12 hours a day but have not yet discovered or even tried a pair of headsets until after Xmas.
    Does work on screen and internal wifi antenna effect output sound on headphones?
    Can this be easily repaired, possibly without taking off the cover? Does it have an update conflict? Is is a Settings issue?
    Please help with any ideas or suggestions.

    Hello,
    Try wiping the iPad and then starting again. (Don't forget to back up first!)
    I had that problem it was software.

  • Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speaker sound very low

    Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speakes sounds very low.. OK with iPhone  and iPad

    This happened to me exactly! What I did was I went into Audio MIDI and clicked on Bose Soundlink tab. You'll see 3 bars; master, 1 & 2. Max out all the bars and that should fix the problem. Hope that works for you.

  • Can you lower the sound of the "click" when sliding to unlock?

    Can you lower the sound of the "click" when sliding to unlock?

    Settings>Sounds>Lock Sounds>On/Off.
    Doesn't lower it, though. Just turns it off or on.

  • After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage

    After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
    Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phone

    hello...
    I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
    I did the steps you have taken but it is still not working... any updates on your end?

  • I want to ask that my iphone 4 is not ringing very loudly.it is giving very low ring sound. answer me what to do??

    i want to ask that my iphone 4 is not ringing very loudly.it is giving very low ring sound. answer me what to do??

    rajesh.srcc wrote:
    answer me what to do??
    Most intelligent people would simply turn the volume up.  Have you tried that?

  • The sound get low by it self ??iphone 6

    hello i have a problem with my iphone 6 when im listening to music or watch youtube sometimes the sound gets low by it self as if i was recived a message but i dont recive messages i restored the fone and this issue still ....any solution !!?? thanks in advance
    iphne 6
    ios 8.1.3
    16G

    The same way you did in for iOS 7: Settings>General>Accessibility>Reduce Motion = ON.
    Cheers,
    GB

Maybe you are looking for

  • How do I get these windos to communicate? I am lost...

    I am a computer science student who was not happy with the scope of entry level programming classes. I am taking it on my self to learn the nuts and bolts of Java. Right now, I am working with GUIs for the first time and I am lost with this (probably

  • Billing once service has been terminated

    I have received a bill and been threatened with late charges if it is not paid for the period on 1 month from mid december 2014. I was out of contract from August 2014 and contacted EE to switch to them in mid november. The change over from BT was co

  • IDocs for Notification and Work Order messages to third party software

    Dear all, Our client have a third party software in which he intends to manage the Notifications for PM. Now he wants that, when the Notification is created into SAP, the Notification number from SAP to be sent to the third-party software. Also, from

  • My grandma waited to long to update her phone, now I'm it won't update. What do I do?

    My grandmother is technologically impaired when it comes to her phone. She waits till I come over to do anything. I haven't been here in a while and Apple sent out in an update in this time. I'm trying to update it now, but for unknown reasons it's n

  • Submit button in Webdynpro which uses Adobe

    Hi Guys , I have created Webdynpro View with Adobe and then i created UI element Submit button in Webdynpro View which is holding Adobe. Than i executed webdynppro application and clicked submit button to read the data from Adobe . Iam getting the WA