Sound is messed up in project on CC

I am having an issue. If I play my raw footage from the sd card it plays fine. I put it into a project and it messes up. It breaks up and it is not where it was supposed to be.

The exact same thing has just happened to me last night. The earphones work, the EQ does nothing, the music is fine on the computer and I have been the whole way through the 5 Rs.
J

Similar Messages

  • Satellite Pro - Slow start up and sound is messed up

    I have had my *Toshiba Satellite Pro* with *Windows XP* for a good few years now. She has always worked like a gem and has given me no problems until a few weeks ago.
    A few weeks ago I was downloading a program and with it came the very unwanted and unliked "Antivir Solutions" virus. I did everything I could to get rid of this disaster (thanks to the help of support forums) and I think I managed to get rid of it, but ever since then my computer has not been the same.
    I was having trouble downloading a PDF document a few days ago and it froze so I tried to restart which caused the computer to have a hissy fit, deleting my user account which meant I had to set all that up again from scratch. And, now, the computer takes a good 45 minutes from the time you press the "ON" button to when it is ready to start working. Not to mention, it takes a good 10 minutes each time you click an icon for the program to actually start..
    I have tried defragmenting the system and have tried uninstalling unused programs to speed the computer up, but it hasn't worked.
    I have also run several antivirus programs (such as Norton, AVG and Microsoft Security Essentials) to make sure I have no nasties messing me up, but they come up clean.
    May I also add- The sound is messed up also. Whether I use the inbuilt speakers or external speakers the sound is disjointed and broken. As is any Video I play.
    I just don't know what to do.
    I cannot really afford a new computer, but I need my computer to be reliable. I use my computer for 12 out of the 24 hours in each day...
    *What can I do?*

    Hi nicoletrist,
    I dont know what notebook you have exactly but I think the slow Windows start is caused due the viruses that you have or had.
    Few years ago I had also a virus and it was causing a very slow start up, it did take up to 10 minutes until Windows was loaded and the only solution to get rid of this was using Toshiba recovery disk.
    I would recommend the same to you. Use the Toshiba recovery disk to restore factory settings and backup your data because everything on HDD will be deleted.
    Im sure after using recovery disk your notebook will run like a charm again! :)

  • My sound is messed

    Like the sound is not good when I type a wired sound play over the no all typing sound  like right now I am typing and the sound is messed up,even without the headphones

    Try a reset.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Every time i go on the internet the sound starts messing up but only when connected to the internet.

    1- Product name and number: Compaq CQ57 302EA 4GB
    2- Operating system installed: Google Chrome, Windows 7 (was already onlaptop when got new from store)
    3- Error Message: From bullgaurd saying I have a virus but have sorted the problem and there is no virus no longer.
    4- Any changes made to your system before the issue occurred: I have installed games and music of the internet.
    5- In the subject title, include a brief, specific description of the problem, and your product information: Compaq Laptop. Every time i go on the internet the sound starts messing up but only when connected to the internet what can i do to fix this problem?

    #You need to check your home page settings if the pages open immediately everytime you start Firefox.
    #Sometimes, things that you download and install will change your home page. When installing anything, be observant, be sure to look for check boxes during install of anything that allows you to un-check items and not install toolbars and/or make changes to your home page.
    #Firefox can have multiple home pages separated by the "|" keyboard character.
    #It sounds as though your home page setting might be: "When Firefox starts: Show my windows and tabs from last time"
    #See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]

  • I had completed my iDVD project and burned a disc. It worked great! Then someone messed with the project and put a red frame around the opening screen. Now when I burn the project, it no longer has the opening frame. How can I fix?

    I had completed my iDVD project, a Wedding Slideshow with pictures and music, and burned it on a disc. It worked great! Then someone messed with the original project on my computer and clicked around and put a red frame around the opening screen that has the Wedding theme with music. Now when I burn the project to make more DVDs, it burns but no longer has the opening frame. It immediately opens to the iMovie slideshow. How can I fix so I can burn the entire project with opening frames?

    As Bengt suggested make a disk image of the successfully burned DVD using Disk Utility. Then you can burn copies any time you need one.
    In the future once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    You can then burn it to disk with Disk Utility at the slowest speed available to assure the best burn quality.  Always use top quality media:  Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Import iMOVIE with sound? Export Final Cut Project to Pro Tools?

    I am considering the 30 day free trial for Final Cut Pro X. I have a new Macbook Lion laptop.
    I made a short film in iMOVIE 09 on my new laptop. I am getting it professionally scored next week. Can I seamlessly transfer iMOVIE project into Final Cut Pro X so that it keeps all my audio tracks? For example, I have natural background sound on many video clips. I have also added "monster" sound effects all over the place. I have voiceover here and there as well. So I am wondering if I import iMOVIE project to Final Cut Pro X are all the sounds merged (I don't want this) or does the project appear in Final Cut Pro X just like it does in my iMOVIE (video clip with a few audio clips under it)?
    Second question - The audio post company would need to export the project from Final Cut Pro X to a software program called Pro Tools. There are a whole bunch of "preferences" needed to be checked off to make sure they get project the way it should be. However, my question is does anyone know if Final Cut Pro X is compatible with Pro Tools Software?
    FYI - if I don't do the above I was told I need to make 8-9 copies of DVD of movie in iMOVIE. One would be video with natural sound when I filmed and all other sound turned off. Another DVD would be just voiceover sound and all other sound turned off etc... The audio post company needs each sound isolated so they can manipulate audio levels etc. This sounds like pain in butt which is why I am attempting to see if I can do the above.
    Thanks, Todd

    Thank you all for help. Spoke to engineer at audio post company. I told him it sounds like that I can export iMOVIE project to Final Cut Pro X and keep audio tracks. However, I cannot export Final Cut Pro X project to Pro Tools. Hence, no point in moving iMOVIE project to Final Cut Pro X.
    The engineer told me to make Quicktime files of the 4 minute movie with each different audio track. He said as long as the track does not overlap I can have multiple sounds... for example, if my voiceover occurs from 0 sec. to 30 sec and that is only sound then I can keep in a monster sound that occurs from 1 minute to 1 minute 30 sec. etc.
    I did forget to ask him one question. One filmmaker noticed that I had stereo monster sounds and mono monster sounds. I would think most people would not notice difference but the filmmaker did. Not sure if this company can fix something like that?
    Thanks again for all your help. The thing that is weird about all of this is if I buy the latest and greatest Final Cut Pro X and make my next project from scratch with it I still won;t be able to export using Pro Tools... Sounds like Pro Tools only works with Final Cut.

  • Only sound, when I export HDV project with Quicktime

    I'm working with Final Cut Pro 5.0 (yes I know I have to upgrade) with material from HV 20.
    When I export my finished project with the export to Quicktime opt. I can't watch the movie in Quicktime player, Itunes, VLC or MPEG Streamclip, only in FCP. The Sound is there but know picture.
    since I do not yet have DVD Studio I know have a problem, since I cannot make a DVD out of it.
    Or can I? Why is there no picture? How can I do it the best?
    I also tried exporting it through compressor to H.264 and quicktime. That as well didn't work.
    Grateful for help!!!
    /David

    Make sure that you have the current HDV codec present in your /Library/Quicktime folder. If you don't have the codec you will sound but no picture. The codec is automatically installed when installing FCS--but interestingly I had to manually install it from the FCS install packages using Pacifist when I upgraded to Leopard (on my PPC machine, the Intel one was OK).
    Unfortunately Apple does not make the codecs available for download--which makes no sense. If you want to pass an HDV movie over to another machine you must manually install the Apple HDV Quicktime codec. I don't even know if Apple considers this some sort of violation of their License.
    --Robert

  • Sound is messed up SOUNDBLASTER AUDIGY

    I had this Soundcad for some time and in the beginning it worked like a dream, but after a while the sound became very dull, screamy en very high toned and it lost al its dynamics and warmth, and now it sounds awfull en its not really a joy listining to it because the high screamy tones it produces now makes your head hurt like hell.
    I tried alot of things, messing with the equalizer ( that only made it worse ), reinstalling the drivers over and over again, I rienstallt the Soundcard, I took the soundcard out and put it in the PC again and I replugged al the wires several times. But nothing did the trick, and i know it cant be the soundcard because it worked just fine at the start.
    I hope someone can help me

    The exact same thing has just happened to me last night. The earphones work, the EQ does nothing, the music is fine on the computer and I have been the whole way through the 5 Rs.
    J

  • SOUND IS MESSED UP, PLEASE HELP ME !!!!!!!! BASS EFFECT HAS GONE !!!!!!!

    Hi,
    so i was listening to Red Hot Chili Peppers (Oh yeah !) on itunes on my Macbook Pro (Mid 2010 model, OSX 10.6.7) and the sounds working fine, then suddenly the base effect just went and it's like it's being played on an ipod. I then went onto youtube to see if it was just itunes that was messed up but then the same problem was happening with all the sound on my computer. I then went into system prefs to see if there were any options in there but there wern't. I've already searched for an answer on here and it's not the same sound problem where people can't hear voices on movies properly. I think i'm going to see someone at the apple store soon but i just thought i'd put it on here aswell to so if anyone knows why this is happening.
    If you have any further questions just ask me.
    Thanks,
    Max Runacres

    Are you using headphones? Does it only occur if using headphones?
    If yes:
    - Try another set of headphones
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Sound doesn't play in project or source window only from timeline

    I have Premiere Pro CS4 and a problem just started occurring.  If I click on any audio file (not a video file that has audio) in the project window and then click on the play icon in thetop left of the project window I suddenly hear my microphone sound or no sound at all.
    Then I suddenly can't play anything on the timeline.  I can scrub the timelinme and see the VU metter levels move but get no sound.  The problem will go away.  If I play with my Creative Labs XiFi volume control on the task bar sometimes the audio comes back or sometimes it just comes back on it's own.
    If I launch a clip from the project window into the source window the same issues occur.
    If I play an audio clip from the timeline or launch a clip from the timeline into the osurce window it plays fine.
    If I switch from the creative Asio driver in Premiere to the Premiere default sound none of these problems occur.
    I thought it might be related to a recent update of my sound drivers so I did a system restore to a week before the driver updates and the same problem happens.
    It's like the microphone suddenly got mapped to my audio files in the project window.  I spent almost 3 hours on with Adobe being farmed around from tech to tech only to have them tell me that they were having issues transferring the call and that I would need to call back another day.
    I have Windows Vista Ultimate SP2 with 6 GB of Ram and all the latest updates.  If I disable the microphone then the software locks up when I try to play these files.
    Can anyone make any suggestions?

    I had to install a Creative card because the onboard HD sound on my Asus P6T Deluxe motherboard would not allow me to map 5.1 channels in premiere since it did not support Asio.  I tried using an Asio program in the background that was recommended as a workaround but it was problematic.
    Is it possible that my System Restore didn't fully roll back the drivers and that the updates are still the cause of the problem?  I didn't try a complete uninstall/reinstall because I assumed the System Restore was rolling back the drivers.
    Creative has no phone number to call only a tech support email form.  What's weird is that I now notice that I can't seem to mute the microphone at all and had to unplug it.

  • My ipod sound is messed up

    The sound on my ipod is messed up. Only one ear phone will play. At first i thought it was my ear phones but it's not, it's the ipod. Is there anyway i can get this fixed? Or is there a way that if i send this in or something mac will help me out? I really don't want to have to purchase a new ipod just because of this, but if i have to i will. Someone please fill me in on what i should do.

    No, I'm pretty sure its the earphone because i get that problem all the time with my earphones and whenever I get a new one, they work just fine (until they act up and its time to replace them again)so just replace your earphones. IF for some reason it is the iPod, get it checked but I'm pretty sure its the earphones. Doesn't matter if they're new as we have stuff we like to call "defective".

  • How do I delete unused footage but not mess up my project file?

    Here is the direct quote from the iMovie 08 Tutorial.
    "If you try to delete an Event that has clips being
    used in a project you will see an alert window.
    Choose Delete Unused to delete only the clips in
    that Event that are not being used in a project."
    I have been taking 50 minute videos on my camcorder and uploading them to the iMac. On about all of the clips I only use 5 minutes of footage. I was looking for a way to save space and I found this quote in the iMovie user guide, so I tried it.... but it messed up every single one of my projects that had the event files clips in them. The footage i needed still showed up under the event, but none of my projects that used these clips were working. Did I do something wrong?
    Has anyone else had this problem?

    I'm confused now but then it could be the sort of thing that needs to be actually seen. Don't have an Apple Store nearby you could pop into to ask a genius do you?
    I'm successfully removing unwanted footage without affecting the project as long as the footage isn't in a project. There was one moment where I got the warning signs in a project and the thumbnails went blank but restarting iMovie fixed that.
    Maybe if you described the exact process you've been through from start to finish as far as rejecting and removing footage goes I or someone could see where you went wrong.
    With something new like iMovie 08 I think it's probably best to start with just one project, exploring all the features including removing footage so that you get a good grasp of it before really getting stuck into it. I wish I'd been a bit more patient myself.
    Have you fully explored iMovie's Help topics for "Removing unwanted video from your hard disk"?

  • Problems with sound clips after conv. iMovie project via mediabrow. to iDVD

    I have made a 30 min long project with 80 small video clips. The project is alright when viewing it in iMovie, but after I have prepared via the mediabrowser and thenaften view the project in iDVD - every other sound clips is without sound and on some video clips it mixes some soundtracks from other tracks into it. Any ideas, I'm getting very frustrated
    Thanks in advance

    I'm having the same problem. Everything plays beautifully in Imovie and then when its shared with idvd or media browser it all goes weird. I get sound from footage that I either haven't used at all or audio that I have detached and deleted playing over the top of other bits, or sound going out of sync.
    All my video footage was shot with 12 bit audio. For most of the footage that I've used, I've detached and deleted the original audio and put other tracks over the top, the footage that still has it's original audio, I've converted so it has 16 bit audio. I hoped that would solve the problem but my newest version of the video seems to be worse than before.
    Everything plays fine in imovie and then warps when it's shared.
    Any ideas would be greatly received as I am going crazy and wasting a heck of a lot of time that I don't really have!!!

  • Help-I've messed up a project for work!

    I took several audio interview clips--one was stereo--the rest were mono but at one time they all were(because they all came from the same recorder) and I put them all together in GarageBand 3 to make one audio track for a slide presentation for work. Never realized until I was finished that most of the clips were mono. Now I've tried just about everything, used Switch, went back to the original, I don't know what I"m doing wrong. I need to make these clips stereo but have had the hardest time getting anything to work for me. I don't know Audacity and it's too late for me to learn--anyone know what I'm doing wrong or how to fix my mess? Thanks in advance!

    I don't think you understand. I used a voice recorder. I got a bunch of audio tracks. Somewhere along the line something got switched somewhere and now I have a bunch of clips--this is an interview---that need to be spliced together., Some of them came out mon--although 1 & 2 are turned on in GarageBand. I'm trying to put the interview together but only the top track is coming up on some of the clips.

  • Trial Première pro CS3 combined with Sony DHR-1000NP/No sound rendering the Première Project

    Dear friends,
    I am a belgian and I have many years of good experience with Pinnacle DV500, Adobe Première 6.0 and the Sony DV Recorder DHR-1000NP.
    As I want to make a further step, I downloaded the trial of Adobe Première Pro CS3; I installed this trial on 2 OTHER computers, Windows Professional XP , SP2. With both I have the same problem!
    I get good .avi's from my DV tapes, played with the same Sony DV Recorder DHR-1000NP, over a fire wire, connected with the OHCI of the computer.
    When playing the obtained Première project, the video and audio on the screen and the amplifier of the computer, are perfect; the videosignal over the firewire and the Sony DV Recorder DHR-1000NP is also perfect, but there is absolutely NO audiosignal reaching the Sony DV Recorder DHR-1000NP.
    Who can explain me how I should manage that problem?
    Thank you for helping!
    With my best regards,
    Marc

    Beste Marc
    Ik heb vandaag de upgrade gedaan naar Premiere Pro CS3. Ik werkt normaal op XP Pro, met capturekaart DVStorm2 (waarmee ik via Premiere Pro 1.5 goed kon werken. Hierop hangt mijn Sony DHR-1000NP.
    Na de install van de CS3-versie heb ik geconstateerd dat de DVStorm2 niet meer werkt. Dus ik naar de winkel om een PCI-poort IEEE1394.
    Het rare is nu...
    wanneer ik de DHR-1000 hierop aansluit start Premiere CS3 op, maar vertelt me dat ik niet in EDIT-mode kan. Capture-window opent, ik kan de video besturen, maar de record-button is disabled.
    Met een kleine camera (sony DCR-trv270e) lukt het wel.
    Mijn vraag... hoe heb jij jouw DHR-1000 aan de praat gekregen?
    Er is duidelijk niets mis met de PCI-kaart, wel met het toetsel dat ik aansluit.
    In configuratiescherm komt onmiddellijk wanneer ik de DHR-1000 aansluit een "other devices" warning, geel vraagteken, met AV/C tuner, driver not installed. DOen heeft geen zin, er is geen driver voor.
    Ik zou het echt op prijs stellen mocht je me op de goede baan brengen. Ik wil je eventueel eens bellen... mijn nr is 0485/30 31 97.
    Van harte bedankt
    Stef Ryckmans - Kortenberg

Maybe you are looking for