Sound is not in stereo after rendering

My big problem is in the title. I made a nice video about my studying in Hawaii, but unfortunately the sound is not in stereo after rendering. No matter which settings I use, the sound is coming just from the left speaker on my 5.1. System. Does anyone have an idea how I can solve this problem? Thank you very much! Sam

If you run your Source Footage through either G-Spot, or MediaInfo, it will give you the full details of the Audio Stream in the file. That could tell the story. Both of those utilities are free, and no video-editing computer should be without them.
You could have 2-channel stereo, or 2-channel dual-mono. They are similar, but can have different results, and can be edited differently. G-Spot, or MediaInfo will tell you for sure.
Besides posting a screen-cap from one of those programs, with the Source Footage file in it, I would also post one more - that would be the Timeline, with one of the Clips showing, and also w/ the Audio Mixer open, and visible. One can accidentally Pan the Audio to one channel, or the other.
Good luck, and please let us know a bit more.
Hunt

Similar Messages

  • Rendering problem, changes do not show up after rendering?

    I am new to this and can not figure out why the end result after rendering only shows the "original" movie clip, none of the editing i have done are showing up? when i scrub through the composition everything works fine? I have tried both the ordinary render queue in AE and Adobe media encoder.

    Yeah I think I got it right with the rendering queue, however I saw something now that may have something to do with the problem, my corrections is visible when I have "fast draft" chosen under the "fast previews" button, when i change to "off (final quality" the effect disappears? I thought the choices under that button just is what it says, for fast previews?
    I attach the screenshots you where asking for.

  • Project not running smoth after rendering ???

    Hi there,
    i need some help.
    Problem:
    I have a project with some pictures( big pictures about 8 MPix and some small pictures for working with text )
    With the intention to move this pictures over in the project i use the way to scale and to move with the Object-effects.
    After Rendering all the movings are not smooth.
    Project-Config is DV-AVI, standard
    Is there anything i can do to get the moving of Object ( like Pictures or text) smooth ???
    Until now i have worked with Ulead's MediaStudioPro 8 and i never had problems like this.
    hopely anyone can help me ...
    N.Gruss

    What?
    Did you use the Effect Controls, Motion to scale your picture? Have you tried changing the keyframe interpolations or using Bezier curves?

  • Compressor 4 insert DVD dialog box does not come up after rendering

    Does anyone know what I might be doing wrong when after rendering a DVD project, the process looks like its finished rendering but the insert DVD dialog box never comes up. 
    Very frustrating, but probably something dumb...
    Thanks

    Everything looks good in the Batch Window.
    I'm guessing permissions or preferences, assuming it's not hardware.
    Run Compressor Repair to flush things out…make sure the Trash Preferences box is checked.
    Run Disk Utlity, select your boot drive and Repair Permissions.
    If that doesn't do it, in Job Action, change output device to Hard Drive and se whether it will make a disk image.
    Good luck.
    Russ

  • I love my iPhone and have had it for 2 yrs. but since late Wednesday night my volume and sound have not worked. After visiting 2 different stores 4 times, apple store and calling 6 times I have been told verizon was down and would be contacted but haven't

    why is this?

    First you must send a follow request to the Verizon rep. They must approve it. They must also send you a follow request which you must approve. At that time, you can send a DM to the rep.
    With that said, I am not sure who you should send the follow request to. The signature at the bottom of the rep's message says michelleh_vzw yet the userid of the post says yoseft_vzw.
    I suppose I would try sending one to michelleh_vzw first since they signed the post. You can do that by hovering your cursor over their userid which I have included in this post and clicking on the "Follow" button in the dialogue box which opens up while you are hovering the cursor over the userid. Then you can only wait for them to respond before you can do anything else.

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

  • Sound problems after rendering

    Hi,
    Being that I have Premiere Pro 7.0, I am not too sure how  much help I will get, but i was hoping that someone here could still  help if all possible. Here is my problem. I thought I start practicing  developing video lessons for 3d software. These lessons would be created  using a screen captureing program, called camStudio. In my first  lesson, my first try doing the entire lesson as one video, I found out  that the video file size exceeded CamStudio's exporter file size  allowance when trying to save out to Microsoft DV 1 AVI file. I then  decided to split the lesson into 2, but final compose it as one video in  Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured  videos, I thought it would make things easier if each screen captured  video was in its own simulation. So, in other words,  I have created 2  simulations in one project, and then I had nested both of them into the  3rd simulation. For example, simulation 1 was called lesson1 part a, and  simulation 2 was named lesson1 part b, and the third simulation was  called lesson1. Once I had everything setup, at first everything was  working fine, meaing I could see the video and hear the sound tracks.  However, after I choose to render the sequence using Microsoft DV11 AVI,  I do not get any sound, and yet I made sure that the exporter exports  both the video and audio. Furthermore, after rendering the project,  going back to Premiere Pro's project, and pressing play, I get the  error.... Disk Write Error: Verify drive connection, available disk  space and disk  access privileges
    However, when I go inside  simulation 1 or simulation 2, I still hear their sound tracks. One other  thing I have noticed is that I get the sound back in the project if I  move the orginal simulations into a new simulation. By doing that, I am  then able to recover the project,. but if I choose to render again, the  same process happens all over again.
    Does anyone Have  any ideas?
    My Specs
    Adobe Premiere Pro 7.0
    Windows  XP SP3
    CPU 3.0GHz processor
    RAM 512MB

    so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However,  my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

  • After rendering, no sound

    After rendering a 30 min clip with neat video, warp stabilizer and other small changes, there is no sound once video been produced by encoder. I also find that sequence  won't even render on timeline but I do have sound.
    What is the problem?
    Thanks
    New IMac
    32 GB ram
    i7
    GeForce Graphics Processors (GPUs) | NVIDIA GeForce

    I noticed a peculier thing after I updated After Effects. I tried to render it again but using a different file type: AVI. It rendered, just fine, sound and all... but it was 4 GB. Then I tried rendering at as a Quicktime: Photo - JPEG, with the same result as the very first time I tried it: no sound. But then I played it in Quicktime, instead of WMP 11, and it plays just find, sound and all. So I'm wondering why it would not play sound on my computer or Youtube, if its just a problem with the player. Any ideas?

  • Sound does not work after sleep

    I'm really tired of this problem. Have a MBP Retina running the most current OS 10.8.4. Every few days or so when I wake the system (after having lid closed for a while, and Chrome browser running) sound does not come back on. So, if I am using youtube I can't hear anything. Only solution I've found is to restart the computer, which of course I don't want to do with browser tabs open, etc. etc.
    Isn't there a simple solution to this, before Apple finally figures out what causes this glitch?

    Finder
    Close all windows and quit all applications.
    Click "Go" menu in the Finder menubar.
    Select Computer, t hen Macintosh HD > Library > Preferences
    Open "Audio" folder.
    Right click these two files and select "Move to Trash".
    com.apple.audio.DevicesSettings.plist
    com.apple.audio.SystemSettings.plist
    Close the windows. Restart the computer.

  • After upgrading to itunes 7.3.2 system sound does not work

    I recently upgraded my itunes to 7.3.2 and the sound worked for a short time. it then began to cut on and off until ceasing to work completely after a day or so. I have run diagnostics and my computer can produce sound, but not in any programs or any of the system sounds. i reinstalled windows xp and the sound worked, but when i installed itunes again the sound once again stopped completely. i have checked all the drivers, codecs, hardware etc. and they seem to be in order. what is going on?

    I really struggled with this one and my IT people couldn't help.  They suggested that I add my secure corporate website to the Java Exceptions Sites, and use the Java client, but that didn't work.  I tried the CITRIX Native CLient (ICA Client) and that didn't work either.  So, I searched my Mac for all of the instances of CitrixICAClient, or anything else with ICA in it.  I then deleted all of those files, shut down Safari, rebooted my computer and tried again to log into my corporate site using the Native Client conenction option.  I remembered from years ago, that the first time you try to connect using the native client, that Citrix plugin is downloaded.  THat's exactly what happened and I haven't had any more problems.  So apparently, you have to clean up a little adn make sure that any "old" citrix products are removed.

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

    Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
    I wonder if there is a broken .plist file that may be fixed ...?

  • My MacBook will not play videos. No sound and the video stops after a few seconds.

    My Mac book pro will not play videos. No sound and the video stops after a few seconds.

    Hello GrahamBIOM,
    I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
    Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
    Please respond back at your earliest convenience with results.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Premier Pro 5.5 - Sound will not resume after pausing video - HELP PLEASE !

    Hi everyone.
    I have a co-worker that is having a very strange problem. After he pauses a video and tries to restart it, video works fine but the sound will not resume. This doesn't happen all the time but it does happen often.
    Please help.
    Here is the system specs:
    MacPro 2.6 Xeon
    8 GB RAM
    Kona Capture card
    OSX 10.6
    Thanks for you contribution.
    JC.

    Hi Todd.
    I just finished running all the updates for adobe and it did not find any updates for Premier Pro, so the current version I have is 5.5. I'm going to check to see if there is any update I can download from Adobe that is not been detected by adobe updater so I can upgrade to Premier 5.5.1.
    Thanks Todd.

  • My sound is not working after downloading windows 10

    My sound is not working after downloading windows 10 please can you help me?

    right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

Maybe you are looking for

  • How do I merge 2 Apple IDs?

    Basically I have 2 Apple IDs. I have my primary one that I set up years ago with my Hotmail address & it has all my iTunes purchases & iPhone stuff associated with it. My other one was a mobileme account, that I have since "upgraded" to an iCloud acc

  • Working on an external drive

    1. What should I look for when looking for an external drive to capture to and edit from? 2. When working with the external drive, do I just need to Set the Scratch Disk, Video Capture, Audio Capture, Video Render, and Audio Render to the root of the

  • Momentary checkbox disappeared in Edit mode

    This is the third time in the last week that several of my buttons, which contain assignments using the Momentary Checkbox, no longer have the Momentary Checkbox available. If you look at the screenshot below, you will see where the checkbox should b

  • Can't open CC app.

    I can't open any of the CC app I downloaded, What is wrong?

  • Mail 5.1 / outbox is very very slow

    My email are stuck in the Outbox from Mail for hours. If I send from my Ipad on the same account they go out instantly.