Sound is not playing on apple tv2
Once I updated my iPhone and iPad to iOS 5 I can no longer hear any sound on my apptv2 while using AirPlay , I can get the video part playing on apptv2 but with no audio
Have you tried ripping out the JavaSound stuff and seeing if it still crashes the browser on MacOS?
Similar Messages
-
I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!
There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
10. Reset the NVRAM.
11. Reset the SMC.
12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
13. Make a "Genius" appointment at an Apple Store. -
My iPad will not play sounds on certain applications. ie: if I click on a video from FB sound will not play. If I go to YouTube and play the same video sound will play. Also certain games will no longer play sounds. They always played sounds but now won't now. I just went to my churches web site to watch live service and again no sound. I grabbed my dads iPad and the sound works fine.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver
Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
My recorded footage without sound will not play, but will when recorded with sound, any ideas?
Hi there community!
I have recorded alot of footage on a digital Harinezumi 3 camera and have run into a problem in post production.
Some of the footage is recorded with sound, and plays fine. However, with most of the footage, i chose to turn the recording of sound off. These files without sound will not play in any player, even when Perian is installed.
These are the specs of the video I have been able to find out.
File type: .AVI
Video Stream: JPEG
This is all I can find out, so I am thinking it is an M-JPEG file rendered as an AVI file. VLC player says it can not play the video or audio format 'undf', whatever that means. Another player says it needs a .moov encoder, but I do not see how this is possible. I have also tried attaching audio to it via Logic 9 with no success.
I am at a loss, and I really need this footage for a project. Any ideas?
Thanks for any help!!It won't let me post the video in the forum, so here is a link to it in dropbox.
https://www.dropbox.com/s/k4nz8mg18p4thzd/Mountain%203.AVI?n=145237283
Accessed the file at dropbox. Played the DropBox "display" file in scripted player, played the same resource file using the Safari plug-in, and then downloaded the resource file using the QT 7 Pro "Open URL" option only to learn that this file was an H.264 transcode and not your original file. Used the DropBox download option to download the original Motion JPEG file in AVI file container. File plays as is in both QT X v10.2 and QT 7 v7.6.6 players under Mountain Lion v10.8.4 on my system.
Motion JPEG is one of the "lagacy" codec components turned off under Lion and which remains turned off under Mountain Lion. However, as I understand it, Motion JPEG files are supposed to be passively supported (playback supported) under these systems but requires the codec to be turned back on if you wish to export files using this codec. I turned both Motion JPEG and Motion PNG codecs back on quite a while back and have Perian installed which, as you can see, supplied the OpenDML version of the Motion JPEG codec component to actually play your file on my system. Unfortunately, since QT uses a LIFO codec component list generation strategy, I would have to remove Perian to test whether or not the system configured Motion JPEG component would then become the active decoder. (Did this a year or two ago but not willing to do so again at this time.)
Suffice it to say, the file should play in QT on your Mountain Lion system assuming the correct version of Perian is installed, it is actually active, and you have no conflicting software or hardware installed on your system. Have posted an MOV file containing your Motion JPEG video data in case you want to see if it will play correctly on your system.
http://downloads.walker4.me/downloads/Temporary_files/Mountain%203.mov -
Message sounds off / Not playing
Hello, my Message Sounds are Not playing sometimes, especially when i Remove the earphomes. It's Not the switch for Sounds On the left. The phone is set to 'loud'. The ringtone for calls is already loud/on and works ok, but when i Receive a message there is only the vibration but NO sound... It doesn't work until i'm docking the iPhone on a dockingstation (only the cable doesn't solve the problem). There is Nothing what clogs the audio port Or the other one. Also Video Or other Sounds (Podcasts,mp3, Youtube etc) on the iPhone are Not working in this situation...
Hi , I am having the same problem ! Did you did a solution to it? Xx
-
HT204291 music from ipad not playing on apple tv
music from ipad not playing on apple tv? Videos are, but music is not.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
1. Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
2. Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
3. Restart the Apple TV (Settings > General > Restart).
4. Restart the Apple TV by removing ALL the cables for 30 seconds.
5. Restart your router.
6. Restart your mobile device. -
I have a MAC running Maverick. MP3 sounds will not play in Safari or FireFox, but will play if you download the file locally to the Desktop. How to resolve this?
You probably have an internet plugin installed that is preventing the MP3s from playing. I just checked a site with an MP3, and it played, rather than downloaded.
The internet plugin folders are at:
/Library/Internet Plug-ins and
~/Library/Internet Plug-ins
(~/Library is hidden by default. Let me know if you don't know how to access it.)
My internet plugins were all in /Library; there were none in ~/Library.
Try moving these folders to the desktop (don't delete them), restarting, and then seeing if the MP3s play.
They it will be trial and error to see which plugin is responsible. -
Podcast videos don't play on Apple TV2
I have had this issue for awhile and can't find a solution so I am hoping that someone can give me some ideas on what is going on and how to fix this issue.
I have an Apple TV2 and a MBP running Lion. This issue also cropped up when I was running Snow Leopard. When I select podcast videos to play them the sound is fine but the video doesn't play. It stays stuck on the introductory frame. I can play it on my MBP but it doesn't play on my Apple TV. The latest episode was trying to play the extras that came with the movie, Rio. Could hear the sound just fine but the video didn't play. Very frustrating! And it appears to only be the video podcasts, not videos I shot with my camera nor movies or tv shows, just video podcasts. Any ideas anyone??? I am stumped. Thanks for the help, JudyThere is an easy fix for you.
1) Select the video / podcast / etc that is not working properly for Apple TV
2) In iTunes select Advanced -> Create iPad or Apple TV Version
iTunes will make an optimized copy ready to stream to your Apple TV. -
Quicktime X will not play some Apple Mpeg 4 Movie Files
Hi,
Having a strange issue. Quicktime X will not play some of my Apple Mpeg 4 Movie files anymore.
The files open fine in Quicktime 7, but not Quicktime X.
I receive the error message "The document could not be opened. A required Codec is not available"
I have installed other codecs (Flip4Mac as well as Perian), but no luck. Have re-installed Quicktime X (10.1) and software is all up to date (running Lion 10.7.2). The movie file works fine if I import it to iTunes as well.
Called AppleCare Support and they could not come up with an solution. Does anyone here have any ideas?
Thanks!(BTW, I just realized this was an MPEG-4 topic - my issue wasn't necessairly centered around that architecture)
Yes, I naturally assumed that you were having problems at some point with MPEG-4 Part 2 or Part 10 content.
Since I mentioned "from," I should have mentioned what the codec/wrapper was (it was captured into a .mov file using DV/NTSC via "Capture Now" in Final Cut Pro studio V7, via an analog-to-digital converter). What makes this confusing is that files captured with the same settings sometimes open right into QuickTime X with their audio/video intact, and at other times, only the audio shows up (where upon opening that same file in QT 7, we can see both audio and video). Interestingly, the problem files icon shows up on the desktop as the generic movie icon, whereas the "normal" files' icon is the first frame of the video.
May we assume at this point that the source video data is DV-25 with 16-bit Interger (Linear PCM) audio sampled at 48.0 KHz and it is the scratch MOV file that may or may not open/play correctly in QT X but always opens correctly in QT 7?
Ultimately, though, this is an unimportant point in solving my issue. Why? Well, if I can successfully open the problem files in Compressor (e.g., see/hear the video/audio), then I can theoretically re-compress (or "re-wrap?") them to whatever codec I want - ideally one 100% compatible with QuickTime X.
I took a test file, placed it into Compressor, and applied the DV/NTSC setting to it (yes, I know, the same setting the file already had). After re-encoding (which took very little time), the file was perfectly executable in QuickTime X - both Audio and video showing as to be expected, and no real difference in quality (not that VHS source is quality to begin with).
This sounds as if the "problem" file's container may be the source of the problem. As I don't know if your Compressor test is passing the data through to a new faile container, I would make an additional test here. If your version of QT 7 is keyed for pro use, I would simply use the "Save As..." File menu option to to create a new file container. In fact, I would probably just create a "reference" file rather than another "standalone" file here—a very, very fast operation—and then open the secondary file in the QT 7 "Properties" window to ensure all of the data tracks (1 video, 2 audio, and 1 timing) are present. If all looks good, I would then try opening the reference file in QT X to see it it now plays. (I.e., whether you use a reference file here or a standalone file, the object is to see if the QT X player will now recognize all contained data tracks whether resourced by reference or physically contained in/via the new wrapper.)
Could this have been answered without knowing the complete "from" specs? Probably… which is why I posted to the help forum in the first place - the goal being some other reader may have had the same issue, and had a handy solution or suggestion, saving me the time of experimentation (what forums are great for).
I don't know about you, but I would still be looking at profile/level combination settings to see if an an assumed MPEG-4/AVC video and/or AAC audio settings had been properly encoded for QT playback.
I have no doubt that there's a technical difference between the files that created this issue in the first place. But, the solution of re-compressing with an identical codec did the trick, which for this project is good enough for me.
Recompressing data is slower than rewrapping data which is slower than rereferencing the data pointers. But, if your solution works, then that is all that matters. -
From good iMovie to iDVD sound track not playing (let us try this again!)
There was an earlier problem of this posted here...the question was marked ANSWERED...but didn't solve anything for most of us that replied. So let us take it out for another spin...
Created in iMovie...works perfect in iMovie 6...then SHARE with iDVD. Attempting to preview...no sound track is played/heard.
Can someone let us know what is going on...how to fix...and why we users are forced to be beta-testers for RELEASED software? This problem seem like something that SHOULD have been found, tested and corrected by release date.
This product is wasting a lot of user's time and dvd discs.
ThanksThis product is wasting a lot of user's time and dvd discs.
Well I can help you stop wasting disks, at least! Use "Save as Disk Image" to encode the project and create a ".img" file. You can test the final encoding by mounting the .img file and playing it with DVD player in your applications folder. If this has sound, then burn it with Disk Utility.
iMovie will sometimes tolerate both 12 bit and 16 bit audio. iDVD won't - it must have 16 bit audio. Check the settings on your camcorder with the problem DV tape in it. If it is 12 bit audio, there are fixes listed here:
http://docs.info.apple.com/article.html?artnum=61636
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
http://danslagle.dvmix.com/mac/iMovie/audio/1000.shtml
I know you say it plays fine in iMovie, but these fixes sometimes help files that work in iMovie but don't work right in iDVD.
If none of this applies, please let us know, and as F Shippey said, let Apple know too!
John B. -
In Flash the sound does not play only started from the beginning. Can anyone please help?
In Flash, the sound only plays if the file is started from the beginning. The sound doesn't play if starting from anywhere other than the beginning.
This is very frustrating when trying to sync the animation with the sound as it's not possible to scroll back and forward with the sound playing. The only way the sound works is if it is started from the beginning.
If anyone can help that would be fantastic.
ThanksHi Jeromie,
Many thanks for your help. Here is some additional information, which may shed light on the problem.
I am using Flash Professional CC 2014.0 release, Build 14.0.0.110
The computer I'm using is then iMac running OSX version 10.9.3 Build 13D65 2.7 GHz Intel Core i5
I am using Flash, not a web-based editor that leverages Flash Player.
"a direct link to the project or tool would be useful in allowing us to attempt to reproduce the problem" - Not sure how to do this, how can I add the project to the forum?
Many thanks once again for your help, let me know if you need more information.
Cheers
Michael -
Flash CC sound files not playing
I have a mp3 file on a layer. I stop the fla file abuout 20 seconds in, but when I click on the play button to continue, the mp3 files starts from the beginning, not from the current location. What do I need to change so the sound file will play from its current location? Thank you.
Rob, I tried your recommendation, it still will not sync. I'm in the middle of my fla, and when I start from (ex. keyframe 500), the mp3 plays from the beginning (keyframe 1). This issue is intermittent. Some fla I have no issue, then others this problem happens.I end up using an older version of flash to do most of the work, then I complete the finishing parts in Flash CC.
-
Sound clip not playing on runover
how come the sound clip is not playing when i run over the homepage button here?
thanks.I noticed that your site is asp driven... Does the video work when you upload the "deploy to web" folder content to the server? (from a simple html file -- I usually rename the "main.html" to "index.html" and point the browser to the web folder containing it)
>>>>I checked out your site. i see the problem you mentioned, but I have
no idea what might be behind it. . . perhaps there needs to be an
autostart and loop function added to the video in each state.
I finally narrowed down the issue... This must be a bug!
It turnes out the video will play throughout all PAGES / STATES only when it starts playing on the DEFAULT PAGE. Since my loop video was starting on the second page, it would stop when you go to any other page or use button -- even though it was marked to loop. The fix was to put the video outside of the vewing area on DEFAULT page. Now it works.
Btw. The autostart & loop functions reamain the same throughout all the states. They can not be changed for each state individually (at least in this beta) -
Flex Mobile - Sound Effect not Playing on List snapping (code sample provided)
Hello All,
I'm trying to figure out how to play a Sound Effect on the trigger of the "changing" event on a List.
So basically I have:
<s:List id="theList" width="100%"
itemRenderer="MyIconItemRenderer" verticalScrollPolicy="off"
pageScrollingEnabled="true" scrollSnappingMode="center"
caretChange="playSound(event)"> ... </List>
So the list above snaps to the item to be centered, though I would like on every snap, for it to make a click sound. I've added the method for playing the sound as:
private var tickChange:Sound;
private var soundEffectURLRequest:URLRequest = new URLRequest('/assets/sound/click.mp3');
protected function playSound(event:IndexChangeEvent):void {
tickChange = new Sound(soundEffectURLRequest);
tickChange.play();
The Sound effect plays, though it's not playing at every Snap interval, so if I scroll fast among them, it's not playing, only on the last selection.I can´t believe it.. While writing the previous post, I thought on a really simple solution and compiled it to give it a try. It works perfectly!
As simple as setting the "cacheAsBitmap" property to "true" on the Spark lists of the views!!
Maybe you are looking for
-
HT5622 Can Face Time be used to connect with more than one person at a time?
Can I connect with more than one person at a time when using Face Time?
-
Cannot copy files to/from external drive
Hi All, Bit of a cry for help. I run an iMac 3.06 Ghz Intel Core 2 Duo with 10.7.3 and I'm having some serious problems with an external drive. Some history first - I have a large iTunes library (~3Tb) of everytype of media which I stored on an e
-
I have been creating a film on Final Cut Express and half of my film has disappeared! What can I do to retrieve it?! Furthermore, command Z doesn't appear to be working! Any help would be much appreciated!
-
I have been having an issue for the past year that when a Subject line in a Lotus Notes e-mail contains " " marks and I want to PDF it with Adobe, it causes both programs to hang and crash. I'm able to keep clicking a prompt to ignore the error, but
-
I have a situation where I need to keep track of Data that looks like a crosstab report. ie let us say there are 2-6 kinda close sets of data like the eg. below. the #of columns could be 3 -6 variable depending on the set. The time interval could var