Sound is reversed on PCI soundcard
I installed a pci soundcard , disabled ac97 in bios, i get sound but the left and right sides are reversed. hard to play games when gun shot from behind sounds like its in front , or from left and sounds like its on the right.,
there is no way to switch speakers or i would have done so already
thanks though.
also uninstalled ac97 drivers... to no avail.
Its the same with headphones.
Similar Messages
-
Hi,
I have a blue and white Mac G3, my onboard sound in jack has broken and i can no longer record into my mac, i have heard that its possible to use a pci soundcard but i dont know which one as i have searched google but cant find what i need, i dont want an expensive soundcard just a basic good quality soundcard, i am running OS 9.2.
Many thanks, Andy.I currently use an M-Audio Audiophile 2492 PCI sound card in my Power Mac G4/400 AGP "Sawtooth." It works well and drivers are still available for this card from the M-Audio website.
I haven't checked eBay lately for a used one, but as another post alluded, a decent Audiophile 2492 might set you back around $50US or so. You do need to make sure that the card is designed to work in the old PCI slots -- some of the older cards were factory modified to work in the PCI-X (or whatever it is called) of the new form-factor Power Mac G5s. Almost all Audiophile cards since the G5 model came out have been made to support that slot architecture. I don't know if the PCI-X is backward compatible with the old PCI standard of the older G3 and G4 Power Mac towers.
If you do find a decent used Audiophile card, pay special attention to the RCA style jacks on it. The grounding sleeve of the jack was held in place within its plastic casing merely by the friction of the metal against the plastic. On my card, the grounding sleeve of one of the jacks consistently comes out of the card when I remove the cable, which can be quite an annoyance. The fix is to simply push the sleeve back into the plastic holder.
Otherwise, it's a great sounding card; much better than anything that Creative Labs every put out for the Macintosh. As long as you have fast enough hard drives (7200 RPM or better), your G3 should have no problem using the full 24-bit 96,000 kHz sampling rate of this card. -
On-board sound card failing. Will BIOS let me add a sound card into the PCIE slot?
On-board sound card failing, consistently locking everything, (yes, I updated all drivers, codecs) so want to put in new sound card. Will the BIOS let me add a sound card into the PCIE slot? (of course after disabling the ReakTek onboard sound) I don't see an option to choose PCI or PCI-E in the setup screen (F10 at boot) for audio.
Pavilion desktop a6200t, Windows7 SP1
System board is Lancaster8 1.04, BIOS 5.18
This question was solved.
View Solution.Hi there! yes it will let you install a seperate sound card as long as you have a vacant slot
spacechild -
Sound problems (load_state:1608: No soundcards found)
Hey there!
I am having troubles with my sound devices. It was running very well until yesterday when I did pacman -Syu. Unfortunatelly I can't remember which packages have been upgrade exactly... :-/
The first hint of a problem is that the alsa daemon is giving me this error message:
[root /etc/rc.d]# ./alsa start
:: Restoring ALSA Levels [BUSY]
/usr/sbin/alsactl: load_state:1608: No soundcards found... [FAIL]
[root /etc/rc.d]#
My soundcard is the SupremeFX II Audio Card which came with the Asus Motherboard Maximus Extreme.
Like the wiki told me the following information might be helpful:
[root /etc/rc.d]# lsmod|grep '^snd' | column -t
snd_hda_codec_analog 83184 1
snd_seq_dummy 3540 0
snd_seq_oss 36224 0
snd_seq_midi_event 8592 1 snd_seq_oss
snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 31208 1
snd_hda_codec 82000 2 snd_hda_codec_analog,snd_hda_intel
snd_pcm_oss 47328 0
snd_hwdep 9944 1 snd_hda_codec
snd_pcm 90808 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 25344 2 snd_seq,snd_pcm
snd_page_alloc 10752 2 snd_hda_intel,snd_pcm
snd_mixer_oss 20976 2 snd_pcm_oss
snd 76712 11 snd_hda_codec_analog,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_pcm,snd_timer,snd_mixer_oss
[root /etc/rc.d]#
To me, this looks ok. Am I right?
Now the next thing, ls -l /dev/snd, which is a bit weird. I did this a few mintues ago and everything seemed to be okay. There were some devices similar to the output here http://wiki.archlinux.org/index.php/Adv … are_loaded. I thought I might give OSS a try and installed it with pacman -S oss. I edited /etc/rc.conf accordingly but it didn't work. So I decided to prefer solving the problems with alsa. I did "pacman -Rs oss" which removed both before installed packages "kernel26-headers-2.6.32.7-1" and "oss-4.2_2002-2". I changed /etc/rc.conf again back to the state before the oss installation. And now, there is nothing left in /dev/snd:
[root /home/user]# ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Feb 3 12:05 by-path
[root /home/user]#
I also can't load the modules manually as described on the wiki page.
[root@QX9450 /home/mm]# modprobe -v snd-hda-intel
[root@QX9450 /home/mm]# modprobe -v snd-pcm-oss
[root@QX9450 /home/mm]# ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Feb 3 12:05 by-path
[root@QX9450 /home/mm]#
What can do now? Perhaps it would already be helpfull to know which packages have been upgrade by pacman -Syu. Is that possible, somehow?
This is really important to me as no sound is a total pain in the ass... Especially as I have nearly no time to play around with these things because I have a lot private stuff going on... so please, help me if you can.
Thanks a lot!Dear yvonney
In any application I can freely choose between ALSA or OSS drivers. I can hear sound in each configuration without having to unload or uninstall neither ALSA nor OSS modules.
My module list is:
>lsmod
Module Size Used by
cls_u32 9056 2
sch_sfq 7584 3
sch_htb 19040 1
ipv6 338656 16
fan 5704 0
battery 13896 0
ac 5640 0
gspca_spca500 14592 0
gspca_main 28160 1 gspca_spca500
em28xx_dvb 11588 0
dvb_core 106384 1 em28xx_dvb
em28xx 97680 1 em28xx_dvb
ir_common 45892 1 em28xx
v4l2_common 19360 1 em28xx
videodev 42752 3 gspca_main,em28xx,v4l2_common
v4l1_compat 18276 1 videodev
v4l2_compat_ioctl32 11040 1 videodev
videobuf_vmalloc 8036 1 em28xx
videobuf_core 19332 2 em28xx,videobuf_vmalloc
tveeprom 14724 1 em28xx
snd_seq_dummy 3588 0
snd_seq_oss 36320 0
snd_seq_midi_event 8640 1 snd_seq_oss
snd_seq 64768 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 47360 0
snd_mixer_oss 21024 1 snd_pcm_oss
arc4 2240 2
ecb 3584 2
radeon 716512 1
ttm 43776 1 radeon
snd_emu10k1 161408 1
snd_via82xx 29228 1
snd_ac97_codec 133592 2 snd_emu10k1,snd_via82xx
ac97_bus 2208 1 snd_ac97_codec
ppdev 8712 0
drm 191392 2 radeon,ttm
snd_usb_audio 106304 1
snd_pcm 91848 5 snd_pcm_oss,snd_emu10k1,snd_via82xx,snd_ac97_codec,snd_usb_audio
snd_timer 25456 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 10832 3 snd_emu10k1,snd_via82xx,snd_pcm
snd_usb_lib 20672 1 snd_usb_audio
rt61pci 23940 0
crc_itu_t 2208 1 rt61pci
snd_mpu401_uart 9312 1 snd_via82xx
snd_rawmidi 26752 3 snd_emu10k1,snd_usb_lib,snd_mpu401_uart
i2c_algo_bit 6980 1 radeon
snd_util_mem 4736 1 snd_emu10k1
snd_hwdep 10056 2 snd_emu10k1,snd_usb_audio
snd_seq_device 8372 5 snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
rt2x00pci 8736 1 rt61pci
parport_pc 42920 1
snd 77224 20 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_via82xx,snd_ac97_codec,snd_usb_audio,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_hwdep,snd_seq_device
rt2x00lib 35936 2 rt61pci,rt2x00pci
led_class 5160 1 rt2x00lib
soundcore 8768 1 snd
eeprom_93cx6 2400 1 rt61pci
thermal 17760 0
button 7264 0
lp 12772 0
amd64_edac_mod 23240 0
parport 39472 3 ppdev,parport_pc,lp
psmouse 60708 0
mac80211 179312 2 rt2x00pci,rt2x00lib
edac_core 51660 3 amd64_edac_mod
emu10k1_gp 3840 0
gameport 13808 3 snd_via82xx,emu10k1_gp
pcspkr 3296 0
evdev 13024 10
i2c_viapro 8856 0
i2c_core 25664 8 em28xx,v4l2_common,videodev,tveeprom,radeon,drm,i2c_algo_bit,i2c_viapro
serio_raw 7268 0
sg 33664 0
cfg80211 104344 2 rt2x00lib,mac80211
rfkill 24232 1 cfg80211
input_polldev 4688 1 rt2x00lib
slhc 6624 0
shpchp 40252 0
pci_hotplug 33200 1 shpchp
skge 47568 0
w83627hf 33268 0
hwmon_vid 3872 1 w83627hf
k8temp 5760 0
cpufreq_ondemand 8976 1
powernow_k8 15428 0
freq_table 4576 2 cpufreq_ondemand,powernow_k8
processor 42364 1 powernow_k8
rtc_cmos 13756 0
rtc_core 22116 1 rtc_cmos
rtc_lib 3168 1 rtc_core
ext3 151184 6
jbd 59496 1 ext3
mbcache 9028 1 ext3
usb_storage 64928 1
sr_mod 19556 0
cdrom 41320 1 sr_mod
sd_mod 31848 9
uhci_hcd 27232 0
ehci_hcd 41776 0
usbcore 183764 10 gspca_spca500,gspca_main,em28xx_dvb,em28xx,snd_usb_audio,snd_usb_lib,usb_storage,uhci_hcd,ehci_hcd
sata_via 12324 0
ata_generic 6244 0
pata_via 11912 6
pata_acpi 5824 0
libata 193612 4 sata_via,ata_generic,pata_via,pata_acpi
scsi_mod 133592 5 sg,usb_storage,sr_mod,sd_mod,libata
>lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
00:0c.0 Network controller: RaLink RT2600 802.11 MIMO
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
00:0d.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
> uname -a
Linux SOBREMESA 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64 AMD Sempron(tm) Processor 3000+ AuthenticAMD GNU/Linux
Note: it was not this computer where I had the problem of the /dev/ files, it's just an example where I can use both OSS and ALSA drivers.
Best regards!
David Bluecame -
Can't I Use A Pci Soundcard ???
I have already pasted this message before but I did not got a final answer, so I will try again:
Apache ASC-200 soundcard + NEO2-865LS motherboard
I had the Apached soundcard acs-200 before the I had the MSI 865NEO2LS and there where no problems (I had another MSI mothoerboard then for pentium 3). Then I bought the MSI 865NEO2LS and pentium 4 and put in the Apache soundcard (after disable the audio of MSI in the BIOS) and I had blue-screen errors (once a day during playing audio files, not all the time). Then I took off the Apached soundcard and enable the audio of MSI in the BIOS and it works OK now. The problem is that I want to use the MIDI port of the Apache soundcard, and now I can not do it. CAN ANYONE TELL ME WHAT CAN I DO ABOUT IT????First of all - have you disabled all the options for your Audio card in the BIOS (I think that the options are 2 but I'm not sure)? Second - have you updated your MB BIOS version (Try using MSI Live Update) and Third - check for new drivers for your sound card. Remove all the drivers for your Sound Card which comes with your MB, shut down and then put your other Sound Card and Install. Let's hope that this will work -
-
Right and Left sound is reversed
As the title says, my right headphone plays left sound, and vice versa.
I looked through some of the pages for relevant info but found none that I could use.
Do anyone of you know how to switch them over. (and no, i have no ability to change the chord from right-socket to left-socket)
Thanks in Advance
TyskenI got the front panel to work correct and not reversed on my sonata.
I just switched RET_R+FPOUT_R with RET_L+FPOUT_L.
Still got that disgusting sound in the rear though. Sounds horrible -
Sound Blaster X-FI Pci Express Front Panel Not working right Win7
ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out. -
5.1 surround sound from macbook pro, external soundcard (USB)
I've been spending lots of hours searching for some kind of a external soundcard that is compatible with mac.
I have a logitech x-530 and need to find a solution on how to get it working. (true surround..)
Im not sure what you call it, but i think its "analog" sound, atleast i need to be able to connect 3 cables (front, surround, base)
I would really appreciate help with this problem!http://www.esi-audio.com/products/gigaporthd/
-
Bugged drivers 2.40.0008 Sound Blaster Titanium xfi pcie
Hello guys,
after several attempts i can assume that the new drivers 2.40.0008 for my Titanium xfi pcie cause bugged audio in Broken Sword 5. If i go back to 2.17.0008 everything works fine. My system has win 7 sp1 x64.. i've tried also formatting my pc and the problem is still there! What's the problem with this new 2.40.0008?
I wrote Revolution Software about the bug but they didn't gave me any solution!
The game starts and the audio is ok but every time a dialog begins i've to click mouse button to go on whilest with 2.17.0008 this problem is not present...
Thanks so muchOriginally Posted by magg
BS5 use OpenAL driver sound so it's MUST work on U X-Fi.
Install latest OpenAL or use alternative OpenAL driver:
- uninstall OpenAL from 'programs and features' at the control panel;
- download the zip-archive 'openal-soft-1.16.0-bin.zip'
kcat.strangesoft.net/openal-soft-1.16.0-bin.zip
- extract the content of the zip-archive into an empty temporary folder;
- go to the subfolder 'Win32' of that temporary folder;
- rename the file 'soft_oal.dll' to 'openal32.dll';
- copy this file (now named 'openal32.dll') to the subfolder '\steamapps\common\Broken Sword 5' of your Steam Installation folder (the folder where the 'BS5.exe' is);
- go to the subfolder 'Win64' of that temporary folder;
- rename the file 'soft_oal.dll' to 'openal64.dll';
- copy this file (now named 'openal64.dll') to the subfolder '\steamapps\common\Broken Sword 5' of your Steam Installation folder (the folder where the 'BS5.exe' is);
- start the game.
magg
UAU thanks so much....
i spent my entire afternoon trying different solutions to replace OpenAl drivers....I tried to intall the one from previous drivers (2.17.0008) but it didn't work (so i assume that the incompatibility is with the new drivers 2.40.0008 because openal drivers are the same 2.1.0.0 in both packages).
I wanted to replace the drivers in windows/system32 dir and after several attempts i used the drivers you suggested me and follow this guide:
Windows instructions:
System wide:
For windows, your alsoft.ini is %AppData%\alsoft.ini. Edit this file (or create it) and add:
hrtf = true
Chances are however, your OpenAL is slightly out of date. No worries though, easy to add in.
Download and unzip this file.
On 32-bit Windows: Copy Win32/soft_oal.dll over C:\Windows\System32\OpenAL32.dll
On 64-bit Windows: Copy Win64/soft_oal.dll over C:\Windows\System32\OpenAL32.dll (Yes I know. The naming was their idea, but it really is the 64-bit dll). Then copy Win32/soft_oal.dll over C:\Windows\SysWOW64\OpenAL32.dll (That's the 32-bit one. Confusing enough yet?)
I still don't find alsoft.ini file and i don't understand where to create it but nevermind....each game (BS5 retail and Book of unwritten tales) runs perfect now!!
Thank you very very much magg -
Can i record sound from my imac intel soundcard
can I record from my soundcard. I have tried Audacity but cabn't see my soundcard on the drop down menu. Thanks, Gooner321
Install these apps they will help you pick the right input source
http://www.macupdate.com/app/mac/11334/soundsource
http://www.macupdate.com/app/mac/14067/soundflower -
Sound Blaster Xtreme Audio PCI Express Quest
I assumed these were uni'versally compatible with PCs but when I opened my Dell tower it doesn't seem to fit in a slot. Can anyone think of anything I'm doing wrong? or are they not compatible with most PCs?Thanks for any help!
As the model name says; PCI Express -> you can connect this model into a PCI Express slot (x, x4 or x6 type slot). Remember always read the Requirements part too.
If your Motherboard doesn't have one then your card has more use in your bookshelf.
jutapaMessage Edited by jutapa on 02-9-2008:06 PM -
I need to move my Audigy2 sound card to another PCI slot and...
Hello everyone , hope everyone is doing well today. (and everyday!)
As the topic says I need to move my PCI Audigy2 card down slot , got a new BFG 6800 Ultra and need to make some room.
My question is how should this be done with as little trouble as possable , I really want to (if possable) avoid at all costs an XP reinstall.
I think if I try to remove the card through DM then shut down and move the card to another slot and then start the PC (I have my BIOS set to plug and Play OS) it should detect it and reinstall it in the other slot. But with IRQ problems being what they are , all that should be sometimes isn't.
I have once before tried to remove all creative drivers , then uninstall the card and move it to another slot on another system (NForce chipset) and wound up doing a major reinstall because it would not see the card , but I have an ASUS K8V SE Dlx (VIA Chipset) now and it seems to be a more trouble free board than Nvidia.
Well thats about all I have for now , if anyone has ever doen this before I would really appreciate any help/tips before I take the plunge.
thanks ,
SC
Message Edited by SouthernComfort on 07-25-2005 07:04 PMCopy the ENTIRE iTunes folder from the old computer to the new computer.
Install iTunes on the new computer.
Launch iTunes on the new computer. Everything in iTunes will be exactly as it was on the old computer. -
hi, folks,
i'm running premiere pro cs6 with a sound blaster recond 3d PCIe soundcard. all works well if i use computer speakers, or if i plug headphones directly into the soundcard. but if i connect to an onkyo receiver via SPDIF out, there is a slight delay in the audio output. has anyone encountered this problem, and/or solved it?
thanks.This forum is for suite specific issues only. You’ll get far more help in the Premiere Pro forum.
Bob -
Alsa sound and xine engine suddenly stopped using the right soundcard
I have a relativly fresh arch install and was astonished how easy the installation of alsa was. I just installed the alsa-lib package and it automatically detected my PCI soundcard instead of using my onboard chip.
But suddenly (about some hours ago) Amarok refuses to playback on the right soundcard. Instead i get output on my onboard card. I'm using gnome and if i check the Audio settings everything is on "Alsa" and if i click on the "Test" button i get that annoying sine-sound - on the right soundcard. If i try to manually change the sound output in Amarok from "Autodetect" to "Alsa" i get a xine error and Amarok crashes.
Then i tried to define my default soundcard in my .asoundrc:
pcm.!default {
type hw
card 2
ctl.!default {
type hw
card 2
No luck. What's happening here?
Last edited by Alp (2008-09-29 23:16:35)I have also problem with alsa, dont want to make a new thread so maybe someone can help me here. This is what I have:
[obsrv@home ~]$ aplay
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2184:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:583: audio open error: No such file or directory
Any ideas? -
Hi Guys
Just a question... .I am not 100% sure but it seems my onboard mobo sound might be making some strange noises.....so I might turn off the onboard audio and put in a PCI Soundcard.
I have a spare on lying aorund but it is old and I am wondering if it is any better then the onboard audio.
The onboard audio is obviously on my MSI 875 Neo-FIS2R Motherboard
But the spare sound card I have is the Sound Blaster Live! 5.1 Souncard
Is this work, better or about the same?
Cheers
SASpazHi NovJoe
Seem like you are the only one trying to help me out here.
Thanks for that by the way.
So let me ask you a couple of questions and I can base my decision on that...
1. Would I notice any difference in sound quality through the speakers if they are connected to the Sound blaster Live! vs the onboard AC'97?
2. Using 2.1 would there be a drop in CPU utilisation for sound. I have noticed when I played C&C Generals on full and at 1600x1200 it was smooth but the sound was choppy.
3. What would you personally go for?
Cheers for your help again
SAspaz
Maybe you are looking for
-
my data from my pc is on a hard drive, 1tb formatted windows ntfs. So I need to copy data, reformat hard drive to mac format, then reload it. is that correct? any tips if so? only 270 gig is data, about 730 is empty internal hard drive has about 9
-
How do i access advanced black & white print mode with CS6 using OS 10.8
We are using CS6 at our printmaking facility and recently upgraded our workstation to Mac OS 10.8.5. Now we are not able to access the advanced black & white print mode anymore when printing gray scale images. Is anyone else having this problem and w
-
Hi I've created a local EAP profile for PEAP authentication and configured user accounts in the WLCs. When I tried to connect to the SSID via my iPhone, popped up a certificate (local WiSM) and I accepted it then it failed with incorrect username/pas
-
Working Space for Color Management...
Hello, I'm working on a project with a series of still, all of which contain embedded sRGB color profiles (as these images were originally used for a web-based job). This video project will eventually go onto a SD DVD to be displayed on a SD NTSC tel
-
Why i cannot open Skype on my android device (Asus...
After the last Skype update on Android i'm unable to open the app. Can you help me?!