Sound is saying selected device has no input controls need help??(Motu Ultralite mk30

Hey all
I'm having problems with my new Motu. I have uploaded and installed all drivers including new uodate from MOTU direct! My iMac Pro is saying that the selected device has no input controls I have updated my iMac software now running OS X Lion 10.7.2. Have tried going through Firewire, unplugging rebooting everyway!! Also through USB both to no avail. I have sound through output and I can seee levels in the sound (System Preferences) so what am I doing wrong. I'm new to both mac and Logic but great with Cubase need your help....thoughts and any suggestions
Thanks MH

'selected device has no input controls' - this is because it doesn't need them - it's for interfaces which have no hardware level control: it doesn't affect whether it works or not, it's just that there is nothing to adjust.
Presumably the mixer has a main audio output: do you get audio out of this?
If no: then you haven't routed something correctly in the mixer.
If yes:
If you go into System Preferences>Sound, choose 'Input': can you see the mixer in the list?
If no: driver not properly installed
If yes:
Select the mixer as the input (this is for testing, it doesn't affect GB).
If you feed the mic into the mixer and you can hear it on the main audio output, do you see the meter in the Control Panel moving?
If no: the interface between the mixer and the computer needs looking at.
If yes:
In Garageband, check you have the mixer set as the input.
Record something on a track and play it back (having checked that playback of anything else, e.g. a loop. is OK): can you hear it?
If yes: enable monitoring in the track info.
If no: then we need to look more closely at the problem - please report back.

Similar Messages

Cant record into to logic pro 9 using samson l1200 live mixer, System/Pref/Audio input tab says selected device has no input control

Hi Im new to this so bare with me..When I connect my Samson l1200 live usb mixer to my Imac 7,1 Intel duo core 3gb ram, osx10.6.8, via usb cable to record vocals/instruments, in System Pref/Audio/Output tab is set to mixer's UsbAudioCodec driver, (Im able to hear playback into headphones via the mixer, and hear the mic when spoken into it but cant record a track into Logic...System/Pref/Audio input tab says selected device has no input control, Ive set the input/output settings in Logic to UsbAudioCodec but still no good...Would it be either the way the mixer is set up? or is this mixer (Samson l1200) not compatible with my particular Imac? I hope I may be able to help as Im only a student trying to record my band thanks

I perfectly understand your problem.
First... just to make sure, in Logic's preferences /Audio make sure Universal Track Mode IS checked, it should be enabled. (I think it probably is just checking)
Second... if you record a track in a new Logic project and then go to the next track to record an overdubbed guitar part, are both parts recorded on the 2nd track?
What I'm asking is overdubbing working differently for two or three recorded tracks as opposed to overdubbing with an imported track.
What I think is happening is you have the main stereo output being recorded into Logic so if you playback an imported or recorded track from Logic while recording a 2nd track (overdub), both are going to be recorded on the 2nd track.
I took a look at the manual, here's the relevant sections.
34 – SEND – USB input send switch
The USB INPUT switch allows you to select one of
two stereo (or two channel) signal paths to feed the
USB output to send to the connected PC. When the
INPUT switch is in the up position, the USB signal will
feed from the MAIN left right mix. When the INPUT
switch is in the down position, the USB signal will
feed from the AUX 1 and AUX 2 buses which enables
you to create a unique mix to send to the PC.
35 – RETURN – USB return switch
The USB RETURN switch allows you to select one of
two stereo return paths to receive USB audio from
the connected PC. When the ASSIGN switch is in the
up position, the USB signal will return to the MAIN
mix bus. When the ASSIGN switch is in the down
position, the USB signal will return to the last pair
of stereo channels which enables you to playback a
recorded track in the MAIN mix, and you can use the
channels AUX sends to feed any of the AUX buses.
This will let you hear the USB playback tracks in the
monitor mixes.
36 – MONITOR – USB headphone enable switch
Press the USB MONITOR switch down if you want
to hear the signal from the USB return in the
headphones.

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

Everytime I download mountain Lion, it always stop at 156mb and says " an error has occurred". I need help?

I need help because Mountain lion downloads but when it gets to 156mb, itss calculating and then an error has occurred. What is the problem

Are you getting an error code?
Try resetting the App Store.
Reset Learned from Old Toad
If that doesn't work:
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store. Sign in and then reclick the Mountain Lion buy. It won’t charge you again.

I need help connecting my macbook air to samsung tv it says selected output has no output controls, can anyone help?

I have a brand new mac book air (oct 2011)
i purchased the hdmi cable and tried to connect to my samsung tv, I have a great picture but no audio and cannot find a solution in any of the forums

For hardware related issues, try resetting PRAM and SMC.
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Color selection tool has stopped working [was: need help with indesign cs6]

I am working in InDesign cs6 and my color selection tool stopped working.

Do I reply here? I have been creating a newspaper in InDesign cs6 and the color selection box won't work any longer. It used to work just fine, but now it won't let me access it.
Someone in tech support last night before they went away, was directing me to: Go to Folder from my desktop, and then to Preferences, then to ~/Library/, then to InDesign version 8.0 and en US. Then we lost contact and I didn't know what to do next, so I still have the problem.

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

How do i transfer music from my windows 7 computer to my iphone 4s when it says the device has timed out?

when i connect my iphone 4s to my windows 7 pc, it says the device has timed out so cannot connect. what do i do? i need to transfer music from my pc to my phone but it wont connect. please help, thank you!

Temporarily disable any security software on the computer, then attempt to sync content to the device.
If that resolves the problem, contact whomever supports the security software (not Apple) and inquire how to prevent their software from intereferring with iTunes.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.

Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.

I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

Quoted from their FAQ's:
I got an error message saying my device is blocked. Why did this happen?
There are two reasons this could happen: You have deleted your account or you have been banned due to violation of terms of service.
- You have deleted your account.
When you delete your account, you agree that your device would be blocked for at least one month. This policy is enforced in order to protect users from stalkers. (If the system allowed users to create and delete their accounts any time they wanted, the Block feature would be compromised and wouldn't be able to protect users effectively.) Please understand this is not a punishment but a security measure intended to keep all of our users safe.
- You have been banned due to violation of terms of service.
Users of this mobile application are required to comply with our terms of service and instructions provided by our service team. The most common violations include, but are not limited to: Creating multiple accounts, uploading pictures not complying with our terms, and abusing the Report feature. In most situations, you will get a warning before you are banned from the app. If you receive a warning from our service team, please read it carefully and take it seriously. If anything is not clear, please contact user support for clarification.

I don't know how it happened but my camera was deleted,i tried downloading it from app store but i can't find it there,i tried downloading other photography app but it didn't work for it says my device has no camera.how can i get my cam back?

i don't know how it happened but my camera was deleted,i tried downloading it from app store but i can't find it there,i tried downloading other photography app but it didn't work for it says my device has no camera.how can i get my cam back?

Default apps are part of the iOS and cannot be deleted. Search all home screens and all folders and/or search for it with Spotlight, that will tell you what folder it's in.
Also check Settings > General > Restrictions to see if it has been restricted.
If not found, Settings > General > Reset > Reset Home Screen Layout.

Have a IPad air. I cannot sync all my music from my computer. It keeps saying the device has timed out??? What does this mean? Unfortunately I have an older Dell that's running windows XP. Help

Have a IPad air. I cannot sync all my music from my computer. It keeps saying the device has timed out??? What does this mean? Unfortunately I have an older Dell that's running windows XP. Help please. Not a computer savvy person

Device Manager which is in Control Panels
I strongly recommend AIDA64 to show everything, temps, fans, chips, drivers and versions
http://www.aida64.com/ Windows has better tools to show you every service and knick and cranny
https://discussions.apple.com/thread/2769294
http://realitypod.com/category/hacks-and-cracks/mac-hacks-and-cracks/
MacBook definitely uses Cirrus - probably iMac

TS1410 MY LAP TOP DOES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO THE IPOD ITSELF HAS FROZEN AND CAN NOT BE TURNED OFF OR RE-SET BUY HOLDING THE MIDDLE BUTTON.

MY LAPTOP DIES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO AFTER THE IPOD HAS BEEN CONNECTED TO THE COMPUTER THE IPOD WILL FREEZE. I AM ONLY ABLE TO USE IT AFTER THE BATTERY HAS RUN OUT. WHAT COULD BE CAUSING THESE PROBLEMS AND HOW DO I RESTORE MY IPOD!!!!!

Hey gwscrt,
Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
I would read the document in full, but here are the applicable steps for you:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Have a good one,
David

99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

I got an iphone from apple store US and am located in egypt , the device has hardware issues and need swap as stated by apple stor belfast when i was in ireland but they cannot swap it in EU as it is purchased from US , please advice

I got an iphone from apple store US and am located in egypt , the device has hardware issues and need swap as stated by apple stor belfast when i was in ireland but they cannot swap it in EU as it is purchased from US , please advice how i can get this swapped without any extra cost on me , this is really frustrating

The warranty is valid in the original country of purchase:
http://www.apple.com/legal/warranty/products/iphone-english.html
Note:
IMPORTANT RESTRICTION
Apple may restrict warranty service to the country where Apple or its Authorized Distributors originally sold the Apple Product.
You will either need to find a local repair shop and pay for it. Or you will need to ship the phone to someone you know in the US and have them take it to Apple for evaluation and then have it shipped back to you. All this will be at your expense. Also note that Apple do not accept direct shipments.

Sound is saying selected device has no input controls need help??(Motu Ultralite mk30

Similar Messages

Maybe you are looking for