Sound Issue when connecting to TV

I have been using the Apple AV cords to connect my video ipod to my tv with no issue for several month. Last night when I plugged my IPOD into the tv and played a movie, there was video but no sound. It was working fine two days ago. I have played with all of the settings. The video plays fine through my headphones. Has anyone experienced this? Could have my AV cable just died? Nothing has happened in the past two days....any insight?

Hi JimSmith,
Thanks for reply.
TNS entry as below:
ORCL_DB =
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 91.198.252.83)(PORT = 1521)) )
(CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED) ) )
It works fine if I choose TNS (Network Allias: ORCL_DB).
For the Basic setting:
Hostname = 91.198.252.83
Port = 1521
SID = orcl
The error I received when connecting to db based on Basic option is Failure -Io exception: The Network Adapter could not establish the connection.
Below are the entries of SQLnet.ora. Any entry should I add into sqlnet.ora?
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Appreciate your comment.
Thanks.
Regards,
Jia

Similar Messages

  • Why am I getting sound distortion when connecting iPad 2 to amplifier.

    I am getting sound distortion when connecting iPad or iPod thru amplifier using AirPlay or 3.5mm to rca cables. Also the sound has far too much bass. No problems when connected in car.

    It sounds like a mismatched impedence.  What are you connecting to?   the output from the jack is intended for headphones, and is not just an audio out.
    Try turning the volume on the pad way down, and use the gain on your amp, and see if that minimizes the issue.
    There is a pure audio signal for both channels on the 31 pin plug, but you would need a special cable to use it.  I would bet they are available if you google.  Although I have read that the 31 pin signal is not filtered like the headphone output, so while it is a pure audio output, there may be some noise in it that would need to be filtered.
    Try google for a 31 pin cable.  ( the input for the car is probably built to take a signal from a headphone output, while your amp may be expecting a lower power signal)

  • How to solve the noise issue when connecting an electric guitar?

    Hello,
    I own a 15'' MacBook Pro of early 2011, with Lion Mac OS X 10.7.2
    I have an issue when connecting my electric guitar (Guitar Rig 4 LE) via USB & starting the Garageband '11 (ver. 6.0.4). I tried playing with the settings to get around the fuzziness/noise that's produced when the guitar is connected.
    The original software I got with Guitar Rig 4 ALSO had a similar issue, but I solved it by turning down the ''Gate'' volume to get a clear guitar sound. I tried looking for a similar thing on Garageband but no luck. I'm taking the online lessons via Garageband, with all that noise it makes it even harder to learn.
    Hope I made my case clear, and I'm looking forward for any suggestions in this technical problem I'm facing.
    Cheers

    Hey Keith, thanks for your response.
    Well, to be honest I had no idea what that was, so I opened Garageband and looked for that option, and it seems I can't access it during the guitar lessons. I tried exiting the lessons to the main window but the option you talked about under the ''Track'' tab was still faded (i.e. inaccessible).
    Did I misunderstand you or done it wrong?
    The noise even gets WORSE when trying out the Rock Guitar lessons, not so bad on the Basic Guitar & Blues Guitar...
    By the way, I did try the ''Aggregate'' Audio MIDI setup thingy from the utilities to enable both ''Built-in Output'' & ''USB PnP Sound Device (which is the guitar)" and didn't solve the problem.
    Running out of options. Opt for surgery? haha jk

  • Ea6300 causing network issues when connecting to web browser on my Mac

    I have had my ea6300 for two months and its causing major issues when connecting to my web broweser before I throw it out the window can someone give me some help.

    Hi bigtimer30, what do you mean by “it’s causing major issues when connecting to my web browser”? Do you mean that the MAC computer is no longer able to access the internet? If yes, is it with both wired and wireless connections? Is this happening to all of your devices? Or just that specific MAC computer? If all the other devices are still able to connect except the MAC, I suggest that you do a power cycle on the computer (if you haven’t done it yet). And you’re having difficulties with the wireless part, try to hard wire the computer straight to your router, and check if you experience the same thing. If the wired connection is okay, you may try playing with the router’s wireless channel. Better if you could give more details for us to give you more suggestions. 

  • Kerberos issue when connecting via VPN

    Hi,
    I am have some issues when connecting via VPN.
    The following kdc log is issued when I log via VPN
    May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): DISPATCH: repeated (retransmitted?) request from 192.168.2.5, resending previous response
    May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.2.5: UNKNOWN_SERVER: authtime 1146535939, [email protected] for ldap/[email protected], Server not found in Kerberos database
    I also have a system log May 2 12:12:21 ATHENA DirectoryService[41]: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
    This logs only happen while logging through VPN.
    Any idea?
    Cheers
    Ben

    Hi,
    When using your VPN are yo using Terminal LIcense or Remote Desktop Connection?
    Please do the following to save form settings:
    1. Only 1 module should be open when using form settings.
        Close other modules that doesn't need.
    2. Close the module after changed. To make sure the settings are saved.
    3. Always close all the module before exiting SBO program, use the click FIle and Exit habit.
    4. Terminal Licensing should be use when connecting remotely.
    Thanks.
    Clint

  • R5K Sound issues when installing Windows 8.1

    Hello everyone
    I installed Windows 8.1 Pro as downloaded. I used BCA > USB on my R5K to install Windows.. (Boot Camp drivers via BCA as well). Everything works fine except the sound when using Windows. There is sound, but it all... sounds disturbing, like listening to a radio. Nothing like the sound quality when using OS X, no epic sound effects and crystals clear sound whatsoever. And I think it's not even using all the speakers at the bottom of the iMac when producing the audio. I tried playing with Sound setting in Control Panned, with the audio settings in MPC, VLC, iTunes, re-installed the drivers just to be sure nothing went wrong with the installation and nothing work, I am still getting that "crappy sound quality"...
    I am welcome to any suggestions, spend half a day just trying to fix this... Thank you in advance

    Does Apple Diagnostics indicate any hardware issues?
    Using Apple Diagnostics - Apple Support
    Apple Diagnostics: Reference codes - Apple Support
    Do you get proper sound on the OSX side?

  • Small "freeze" and sound issue when taking a full screenshot

    Hello,
    This is a strange one, and I've not been using Macs properly for very long, so bear with me
    It only happens when I use cmdshift3 to take a full screenshot, the other shortcuts for taking them are fine, I do get a similar issue when using Grab and it, too, only occurs on the full screen capture. What happens is, the sound clip of the camera noise will begin to play, stop, it goes a little distorted then the windows on screen will freeze up, the mouse will still move, and it stays like that for around 5 seconds until the file is saved to the desktop and all goes back to normal again. I'd like to reiterate that it only does this when i do a full screenshot, and the smaller one with the crosshairs and the individual windows is perfectly fine.
    I tried searching on google, on the main support section and the forums and nothing has come up that's been helpful. I've had a look in the system logs, and at the time's I take the screenshot, the system log reports the following:
    Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,728)->(3,7bd).
    Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,728)
    Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,71a)->(3,7ec).
    Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,71a)
    Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (4,73a)->(5,7c8).
    Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (5,73a)
    I know from that it's referring to my soundcard and there's a memory reference, but that's about as much as I can figure out.
    It might not seem a big issue as the other methods are ok, but if it turns out to be something much deeper I'd like to try and fix it now before it becomes a problem.
    Does anyone have any ideas?
    Thanks,
    Claire

    Bingo! EXACT same problem here! It seems to me its a software bug.. ??

  • Making sound noise when connect to the electricity plug

    I am using Pavilion dv6-2150us notebook.
    My problem is when I connect to the electricity plug my note book makes sound noise when I on the sound. I could not use the wound while connected in electricity. Please help to solve this problem

    http://support.apple.com/kb/TS3281
    try restoring the iPhone but if no change
    Then take it to an Apple Retail store with $199 and exchange for a refurbished replacement

  • Itunes Scrolling Issue when connected to itunes-share

    I have a very annoying issue, when i scroll in my Itunes shares, check the video-demo
    https://www.youtube.com/watch?v=4fNAjjUgFp0
    thanks in advance for an advice
    Itunes 11.0.3

    I also have a new MB Pro running OS X 10.9.5 and a new iPhone 6.  My iPhone connects to iTunes, but hangs at step 6 in the sync process -- copying apps to the iPhone.  I let it run all night last night and it never got beyond the second app.  This morning I upgraded to iOS 8.0.2 and have the same problem.  Now I am stuck at the third app.

  • Iputils issue, when connecting with netcfg.

    I hope what I will do is correct to put it here.
    I updated today iputils and suddenly I couldn't connect to my networks anymore.
    I'm not an expert and I don't know exactly what was going on.
    1) I tried to connect using netcfg to wireless with WPA security, and the result was dhcp lease attempt failed.
    2) I tried to connect using netcfg to ethernet, same problem as before.
    3) I used dhcp without netcfg and it connected correctly.
    then I downgraded iputils and netcfg worked again.

    Hi JimSmith,
    Thanks for reply.
    TNS entry as below:
    ORCL_DB =
    (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 91.198.252.83)(PORT = 1521)) )
    (CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED) ) )
    It works fine if I choose TNS (Network Allias: ORCL_DB).
    For the Basic setting:
    Hostname = 91.198.252.83
    Port = 1521
    SID = orcl
    The error I received when connecting to db based on Basic option is Failure -Io exception: The Network Adapter could not establish the connection.
    Below are the entries of SQLnet.ora. Any entry should I add into sqlnet.ora?
    SQLNET.AUTHENTICATION_SERVICES= (NONE)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    Appreciate your comment.
    Thanks.
    Regards,
    Jia

  • I can't play any songs on iTunes. It is not a sound issue. when I highlight the  song I want it just never plays. The bar up at the top never moves. Any thoughts?

    itunes won't play any songs........i highlight song, it looks like it is ready to play but it never moves across bar at top.....it is not a sound issue. Any thoughts?

    Applications > Quicktime  general media player.  This will help us tell if it is an iTunes problem or something more general.

  • IPad sound issue when playing video from apps

    When I play a video from a link in Facebook or Twitter there is no sound but when I play the same link from YouTube it is fine.

    I have the opposite; I get sound on City TV but no sound on CBC TV nor CTV TV!

  • Issue when connecting to database from SQL Developer tool

    Hi,
    I was trying to connect to a remote oracle database 10.2.0.5 (hosted at window 2008 R2 server) from my local SQL Developer tool.
    When setting up connection in SQL Developer tool, I was able to connect to the database by selecting TNS (Network Allias).
    However, it does not work when I choose Basic type with the same information (HOST, PORT, SID).
    What is the difference between TNS and Basic setting option? Please advise and assist.
    Thanks.
    Regards,
    Jia

    Hi JimSmith,
    Thanks for reply.
    TNS entry as below:
    ORCL_DB =
    (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 91.198.252.83)(PORT = 1521)) )
    (CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED) ) )
    It works fine if I choose TNS (Network Allias: ORCL_DB).
    For the Basic setting:
    Hostname = 91.198.252.83
    Port = 1521
    SID = orcl
    The error I received when connecting to db based on Basic option is Failure -Io exception: The Network Adapter could not establish the connection.
    Below are the entries of SQLnet.ora. Any entry should I add into sqlnet.ora?
    SQLNET.AUTHENTICATION_SERVICES= (NONE)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    Appreciate your comment.
    Thanks.
    Regards,
    Jia

  • Display issue when connecting VGA monitor

    I'm having an isue when my Macbook Pro 13 inch 2011 is connected to my LG monitor via VGA, after a while the monitor does not display the image properly I don't know how best to describe it but it is like when a satellite signal is blocky and scrabled. Sorry for the poor description. This occurs both when the Macbook is connected to a monitor with the lid shut so that the monitor is the main display and with the monitor mirroring. I've had a 2008 Macbook with the same set up and there are no issues, anybody know how to solve this?

    See if what the user did in this thread:
    External Display is pixelated                    
    helps clear up your problems. Your symptoms sound similar to his, and he was able to correct it with video settings.

  • Having issues when connecting and re-connecting back to a session.

    When i am log-on to the MPS2012 through the thin client and let say there was a need to re-connect because of power issue or the network issue for that particular client was disconnected; So when the user connect back to it, it bounces back and fails for
    re-login, after re-logging again, it still bounce back. And other client connect to the particular VM are still connected and running.
    And also in the morning, when i connect, it fails at times and when i ping that particular VM, it times out"Request time out", until i restart it before it start replying and then the client systems will now be able to connect.
    Its giving me concern because they are complaining and also its a school environment. I need resolve this so that even if i am not there they will be able to connect easily and re-connect easily if there was a disconnection from any thin client.
    Please i will really appreciate if anyone can assist me resolve any of this issue or what the cause/problem is.
    Thanks

    cmuunswcanberra wrote:
    It has happened once in another project but I was able to re-type into it and it worked.
    So it sounds as though it may be the project.
    Try this.
    Delete preference files with Preference Manager.
    Delete project ender files.
    Create a new project.
    Copy the problem project and paste into the new project.
    Test a title.
    Good luck.
    Russ

Maybe you are looking for