Sound issue with my msi 880gm-e41 mainboard

please help me to solve the problem as follows----------i have 5.1 speaker system and the sound is good at a medium sound range from my pc sound control,but when i increase the sound the song tends to stop and play randomly,i dont have such type of problem in my previous gigabyte mobo.and the most funny thing is if i unplug the red jack which is connected for middle and sub woofer sound the sound is ok for the remaining four speaker,please help me to solve the problem ,i have already checked many times as the via hd audio has been installed perfectly or not....................

ok here are my PC configuration:
amd phenomIx4-955 BE processor,
msi 88o-gm-e41 mainboard.
2x2gb 1333 bus team&e-lite ram,
220 gt 1gb gpu,
500 gb seagate harddisk,
win7 64 bit ultimate os,
logitech keyboard mouse
delux-sh496 casing with psu
viewsonic 17 inch lcd monitor
via build in sound card,
5.1 logitech soundbox

Similar Messages

  • Random Shut Down on a MSI 880GM-E41

    System under discussion
      AMD Athlon II x3  450 Regor  3.2 Ghz
      MSI 880GM-E41 mainboard
      Kingston DDR3 Hyperx/fb 2x2Gb
      Seagate Baracuda 160Gb IDE  HD
      Logisys 480w Power supply
      USB mouse
      corded keyboard
      using onboard video by ATI
            I used the search to find random reset posts but they all seemed to be 10 years old.. and none marked solved so here is a fresh question for old timers on the MSI board.
            This random shutdown (as described in those old posts) happens with no load on the system except for my always on net connection which does exchange some data.
            This MSI board was a (unknown to me at the time) discontinued item from New Egg.  It works ok most of the time so I was wondering if there is some software cycle that kicks in.  I have no screen savers on or anything else I know of.  A defrag monitor is loaded and I use the Comodo firewall system.  That's it-- nothing else to tell of interest.

    You already have a topic for your issue, no need for another (https://forum-en.msi.com/index.php?topic=160956.msg1179710#msg1179710) . Besides this board is not ten years old. "Similar issues" that old are irrelevant.
    -- TOPIC LOCKED --

  • Sound issues with ga

    hello, ill start out with the basics
    system
    AMD Athlon 64bit 3000+ .8ghz
    MSI Neo2 mainboard
    024MB ddr400 ram
    ati radeon 9800 pro 28mb video card
    soundblaster li've 24bit sound card
    I am having various sound issues with a few games i play, most notably FarCry and Halo PC
    Farcry is the main problem. about 2 minutes after opening the game, my headphones or speakers will flip out and produce a noise like a highly amplified dial up modem. I have already pursued help on the game forums, and had no luck. any help or suggestions would be appreciated
    thanks

    I do not use Skype, but may be  information from the  below linked article helpful.
    https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
    Best.

  • Sound issues with MacBook Pro

    I am experiencing sound issues with my MacBook Pro. I am using a headset and when I am on a skype calsl I have a hard time hearing the other person, the sound is coming in and out and sounds digitized. This issue only started recently, the sound had been working fine for years before this issue.

    I do not use Skype, but may be  information from the  below linked article helpful.
    https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
    Best.

  • I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section.  Any ideas?

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

  • Sound issue with apple tv

    hi ,
    I am getting sound issue with my apple tv recently. when you navigate around the apple tv menu, the sounds are there but when i try to play any video, the sound is not coming out. (Same with airplay)
    The issue can be fix with restarting my apple TV. However, i want a permanent fix. it's not APPLE product at all to always restart to get the apple TV to play sound.
    Anyone know any permanent fix? All the software are latest.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting Wi-Fi networks and connections 
    Recommended Wi-Fi settings
    Sources of Interference
    Wifi Diagnostic Software (for Mac users)

  • Vista SP 1 Sound Issues with Creative Drivers

    Hi all, I recently switched to a X-Fi Elite Pro, with a Nvidia Video Card.
    Windows Vista SP (32bit)
    Intel Pentium D .8 Ghz
    2gb RAM
    XFX GeForce 8600 GT 52mb running
    Creative X-Fi Elite Pro
    (it's been a while since I've needed this kind of support so let me know if more info is needed)
    Anyways, from the moment Vista plays the logon sound there is static crackling and chirping noises whenever there is audio playing at the same time as any kind of visual change on the screen (not every screen update). For example videos on websites that play them as plugins are especially static-y. However, playing a fullscreen game (i.e. World of Warcraft) does not produce the static.
    Interestingly, I have now tried two different video cards. The Nvidia and now a ATI Radeon, both have the same identical problem. I first thought that it might just be a Nvidia Issue but this is not the case
    I have checked for IRQ conflicts and none exist that I can find. I have updated Windows as much as I think I can. I've tried changing Creative drivers as well.
    Any advice is appreciated.Message Edited by djscotty on 0-04-2009 05:7 [email protected]

    Re: Vista SP Sound Issues with Creative Drivers [email protected]

  • MSI 880GM-E41 problem

    Hello,
    I tried to turn on PC,but led of APS blinking and PC can't turn on.I tried everything remove all hardware except procesor,but it blinks.I can't recognize is this PSU or CPU problem?
    P.S sorry for my English.

    Quote from: Dexas on 24-June-13, 17:59:56
    Hello,
    I tried to turn on PC,but led of APS blinking and PC can't turn on.I tried everything remove all hardware except procesor,but it blinks.I can't recognize is this PSU or CPU problem?
    P.S sorry for my English.
    CPU: AMD Athlon X3 445
    MB: MSI 880GM - E41
    RAM : Kingston 2x2GB
    VGA: Intergrated
    HDD: Seagate ST3500418AS 500GB
    PSU: FSP 400W
    OC: no OC
    OS: Windows 8

  • Having sound issues with Mid 2011 iMac 27"

    Having sound issues with Mid 2011 iMac 27". It has 10.10.2 OS X.  Could this the issue and if so how do I revert to 10.7.3

    It is almost impossible to diagnose sounds over the internet, however here is a link to some failing HD sounds. If one of yours be happy, at any rate take it in for service. If you got AppleCare or it's less than a year old it's covered.
    Failing hard drive sounds

  • Sound issue with MSI K8N neo4 platinum

    Hi, I'm having some sound problems with the onboard soundcard 
    The problem consist in LAGS when I play an mp3, I've tried a lot of drivers including the lastest version for alc850 from realtek but nothing!!! 
    I hope you can helpme
    Thanks in advance 

    Quote from: dflw on 05-March-05, 06:11:17
    http://www.newegg.com/app/ViewProductDesc.asp?description=29-102-178&depa=0
    nice fix
    yes I know, the ALC850 sux    ....that's a good soundcard, probably my next upgrade 
    I miss the old good soundstorm, not the best to play games with eax but the sound quality was good 

  • Multiple Issues with the MSI board...

    This is my first experience with the MSI board and so far its not very smooth... I have this MSI NEO 2 standard board My specs are
    P4 2.8C
    256 MB (single module) DDR 400 RAM. (TWIN MOS)
    Geforce Ti4200..
    80 GB Maxtor SATA
    FAX
    CD-ROM
    WIth WINDOWS XP HOME Edition..
    i have done no overclocking and the problems are..
    1. First of all it takes lot of time to show the first screen... like the vga card screen comes after 4 seconds.
    2. Some time i press the power button and when the system is detecting the hard disk and CDROM it gives error message like DRAM timings are too tight. i have check the BIOS setting and everything is normal and there is no overclocking and RAM is rated to run at 400 MHz.. although not a great brand but not a bad one either..
    3. Sometime just before loading the operating system it gives an error message that No boot sector found.. insert a Bootable floppy or CDROM.. and when i restart it start going on as usual..
    So wot are the causes of these problem .. i think mainboard is the main culprit... i have scanned my system with 2 anti virus and there is no virus..
    any suggestions..?
    Thanks..

    Quote
    Originally posted by Eddio1
    I've been reading the posts here for about a week and I decided to finally ask for some assistance.  Just picked up the MSI 865PE Neo2-V from BZBOYZ.COM and 1Gb generic matched Elixir 512's and I've tried dozens of bios settings as posted here.  I was finally able to install 2003 ent. server and if I'm lucky, it will get past the 2003 splash screen to a login screen, I'll log in, then put it to work (you know browse some heavily populated folders) it freezes and a reset is necessary.  Now, I cant even get past the splash screen.  I must have booted 200 times with every bios combination and I'm tired of doing fresh installs and experiencing the same system freeze issues.  I've been in the IT business and built dozens of boxes in the past and never had such problems (using bios failsafe defaults no less!) getting an OS to install and run in a reasonably stable fashion.  Mobos these days are extremely frustrating!  I'm going to pick up some Corsair twinx RAM and hopefully this will resolve.  Any ideas would be greatly appreciated in advance of more waiting and RMAing the RAM I have for some Corsair.  Do you think I'm on the right track because I'm gonna be really pissed if new RAM doesn't do the trick.
    Bios settings:
    Bus mastering enabled
    Configured RAM manually in bios 3-4-4-7-8 (tried PSD to no avail)
    Disabled dynamic o/c
    Disabled spread spectrum
    Normal speed
    HT enabled
    All other settings bios setup defaults
    MoBO specs:
    MSI 865PE Neo2-V latest bios: Version  5.4   Update date 2004-7-5
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=612
    P4 3.2 Prescott
    400 FSB
    1Gb Elixir PC3200 RAM (I suspect this cheap RAM is the issue)
    Memtest says it runs at 3-3-3-8
    I configured it manually in bios (per some previous posts) to run 3-4-4-7 (only way to get a boot)
    Native for SATA/ATA
    PS-Enermax EG365P-VE FCA-3.3V-32A, +5-32A, +12-26A
    ATI Radeon 8500 64MB
    Seagate SCSI Cheetah-36Gb 15K 160Mb/s
    Seagate SCSI Barracuda-73Gb 10K 160Mb/s
    Adaptec 29160N
    Boot to Adaptec then floppy then CD
    HI check my previous thread, entitled problem after udate of xp, or look for threads with name on  Sounds like a similar problem.

  • MSI 880GM-E41

     
    I need information about my mainboard i wont upgrade(bay) the procesor Phenom II X6 1055T L3 9mb 125w On msi site dont have that cpu on cpu suport so i want some information can i put that procesor. 
    MSI 880GM-E41

    I don't think it will support that one since it's not on the list. You can always check with MSI: >>How to contact MSI<<
    You should be able to find the 95W version available to buy though, so that's the alternative.

  • Earpieace / Sound Issues with Droid Razr M

    Having issues with my phone, bought new in September 2012, since yesterday morning. 
    When I make a call using the earpiece, I cannot hear it ringing (like dialing out to them) and after they answer, I cannot hear the person on the other end when they speak.  If I put it on speakerphone, they can hear me just fine and I can hear them.  Also on speakerphone, I can hear it ringing (dialing out).  When receiving a call, my ringtone audibly works, but then the same situation applies once I answer it - I cannot hear they, but they can hear me.  Again, if I put it on speakerphone, both parties can hear each other.  My alarm / ringtone works just fine, as well as all my other ringtone / notifications - such as text, etc.  But, if I try to play a YouTube video, play music through Pandora, or play another audio / video file with sound, it does not produce any sound, even through headphones attached to the jack.  It also plays sound when starting up - the "Droid". 
    Seems like a phone issue considering it is working for some things, but not for others.  I have gone through and checked all settings, tried it in safe mode, did reboots, etc, but all to no avail.  Anyone have any other troubleshooting suggestions, or are having the same problem?  It seems I have going to have to have it replaced - hoping this would be a manufacturers defect replacement though and not something that I should have to use my insurance on!
    Thanks!

    Hello Shelly41877
    I'm very sorry to hear your having volume issues with your device. Thank you for taking the time and providing us with all the steps you already done. Let's work together and get this addressed.
    Has the device been exposed to any liquid or physical damage? Is the device in a case? If so, please remove it and retest. If the issue persists please back up the device and perform a hard reset. Here's how: http://search.verizonwireless.com/?q=hard reset razr m&x1=p1&q1=support
    Please let me know if the issue persists. I look forward to getting this fixed.
    Joe_VZW
    Please follow us on twitter @VZWSupport

  • Sound issues with Apple TV show rentals/"choppy" sound quality

    I have been renting "Lost" episodes from the iTunes store on my new Apple TV. There is something wrong with the sound quality. It's very choppy. Almost like a fan is cutting up the sound. Anyone else experience this problem? What's the fix?

    Hello there, cjb1992.
    The following Knowledge Base articles offer up some great steps for troubleshooting audio issues with Apple TV:
    Apple TV: HDMI audio stops working
    http://support.apple.com/kb/TS2090
    No audio when using Apple TV
    http://support.apple.com/kb/TS3789
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Sound Issues with Mac OS X 10.4.10 ?

    I had successfully updated to 10.4.10. However, now whenever I use iTunes and start a song, I get a "Pop" noise from my Creature II speaker system. After I stop the song and a few seconds later, I get a "Pop" noise from my speakers. So, it sounds like the MacMini is initializing the speaker before and after playing sound through the sound card. I don't know. Has anyone has issues with this "Pop" noise? Is there a setting I can look at to get rid of this "initializing" sound? This is driving me nuts! I do not remember this "Pop" sound during my normal usage under 10.4.9. Thanks, Tony.

    My wife's mini had a similar issue. She upgraded to 10.4.10 and her sound stopped working. She would also get the login screen freezes. Where her computer is located, turning off Airport is not an option, and the sound issue is very frustrating. I helped her restore her entire computer from a 10.4.9 backup she had made just a couple days before, and while the lockup problems are gone, the headphone jack still will not output sound. Just two pops when you plug the speakers in, and that's it. I've tried resetting the PMU with no luck. I hope Apple fixes whatever it is they screwed up, and soon. I won't be applying 10.4.10 to any of my other machines.

Maybe you are looking for

  • Multiple logic scripts in a package

    Hello All, How do I execute mutliple packages using a single package in datamanager? I need to execute 3 scripts. I cannot use them as *INCLUDEs on the first script because the first script has *FOR EACH PROCESS TIME statement. But the second one and

  • Do the 8200 elite CMT motherboar​d SATA ports support SATA port multiplier​s?

    I have an HP-Compaq 8200 elite CMT. I'd like to expand my SATA connection capacity using a SATA port multiplier. Specfications for most of them indicate they work only with motherboards that support the SATA PM / port multiplier feature. Does my moth

  • RFC/IDOC Import error

    Hi when i try to import idoc or rfc iget this kind of error **Ready for import** Import started... BAPI_COMPANYCODE_GETDETAIL: + com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The function module "DD_DOMA_GET" not released for 'remote' calls.

  • Fake Prepopulate

    Hello I have a situation where all the provisions of a user's account on a resource are done by operators (with the neccessary roles to be able to directly provision a resource). The operators should be able to see the user's manager on the form of t

  • Is 2 INIT possible with selective data

    Hi I m havg around 50000 consumer data, and in cube it's not uploading the whole data in one go, can i do 2 INIT with SELECTIVE UPLOADING means 25000 consumer first time and 25000 consumer 2nd time only through INIT. Gaurav