Sound Issues after installing iTunes 7.7

I installed itunes 7.7 on my Powerbook g4 this morning and lost sound. When I open preferences, it says I have no internal output device installed? What's the fix?
<Edited by Moderator>

I ran disk utility from my Leopard DVD, repaired the disk. The sound worked upon restarting.

Similar Messages

  • Audio sounds horrible after installing iTunes vers 10.5. How do I restore the audio quality?

    How do I restore audio quality after installing iTunes version 10.5? The audio is high-pitched and metallic.

    I wish i knew, no feedback or help forthcoming from apple yet

  • Windows Xp bad sound quality after installing itunes 10.5

    After installing itunes 10.5 to be able to get the ios5 update my itunes plays every file with really bad, distorted quality. I try other players even Quicktime works fine. What could be happening?

    Try to download, and install the latest Realtek HD Audio driver.
    Here is the download link:
    http://www.realtek.com.tw/downloads/
    Select the second options (High Definition Audio Codecs (Software))
    And when you install this, i think everything will be good.

  • Issues after installing itunes to windows 7 64bit

    This is the error I get when I plug in my phone. I have uninstalled and reinstalled three times and still get it. I installed the correct version. Please help. Its beyond fristrating.

    Hey kankawaii,
    Thanks for the question, and welcome to Apple Support Communities.
    It might be best to completely remove iTunes and related components, then install to 64-bit version from the direct download link below.
    To remove iTunes completely (along with related components):
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    To download the 64-bit version of iTunes for Windows:
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Thanks,
    Matt M.

  • Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

    Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

    Any one or a combo may help
    Give your iPad a reset. Hold down the sleep and home  keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
    Try a different USB cord
    Try a different USB port
    Try rebooting your computer
    Try closing/opening iTunes.
    If you go through that and it doesn't work, try going into the control panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again

  • Awful Playback after installing iTunes 7

    I can see from the Gapless Playback forum that some are having real trouble after installing iTunes 7. I haven't had that problem (yet) but I have noticed that if I start another application, such as a game, that has sound, then the iTunes playback breaks down and the playback is wildly distorted.
    Anyone else seem this?
    Any clues Apple?

    I shamelessly stole this from another thread - maybe it'll help you.
    The Fix:
    Close iTunes 7
    Upgrade your sound card drivers (just to eliminate that as an issue)
    Upgrade to latest Microsoft direct X version:
    http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A -9B6652CD92A3&displaylang=en
    Start
    Run
    Type: dxdiag
    Click "sound 1" or similarly named tab
    Slide bar to "basic acceleration" (mine was at full, and basic is two clicks to the left)
    Exit
    Restart iTunes 7, and startup music

  • CD Driver Issues after installing 11.1.4

    After installing Itunes 11.1.4, my HP computer, running Windows 7, could no longer find the CD drive.  Upon investigation, someone suggested I update my registry to remove some entries.  I did the following:
    Start, enter regedit in search bar,
    Open regedit
    Left hand menus click HKEY_LOCAL_MACHINE
    SYSTEM
    CURRENT CONTROL SET
    CONTROL
    CLASS
    Then need to find  {4D36E965-E325........... (are more figures but not needed)
    on right hand window see if there is an upper filter or lower filter.....right click and delete the values if either are there.
    RESTART...
    This worked, but now Itunes complains every time I open it, saying some registry settings are missing for my CD drivers.  I've used Itunes on this computer succssessfully for years, until this upgrade.  Apple, whatever you did, please undo it.  Horrible release...

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • HT2292 After installing iTunes 11.1.5, my external hard drive holding my iTunes music cannot be acccessed

    After installing iTunes 11.1.5, my external hard drive holding my iTunes music cannot be acccessed.  Attempting to open the iTunes folder location locks up the computer and requires a cold reboot to restore.

    Hello, LoudenFam. 
    Thank you for the question.  Try the steps in the article below as they may help you resolve the issue that you are experiencing with iTunes becoming unresponsive.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Jason H.

  • After installing itunes 11.1.5, i get a message that says no apple support why?

    AFTER INSTALLING ITUNES 11.1.5, I THEN GET A MESSAGE THAT SAYS
    NO APPLE APPILACATION SUPPORT WHY ??????????????

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • 8.1 can't shut down after installing itunes

    I recently reformatted and did a clean install of window's 8.1
    I have done all updates, both windows and drivers and the machine is very smooth and stable.
    After installing iTunes the computer will no longer shut down, it displays the logging off / shutting down screen but then just reboots.
    I have attempted numerous resolutions to no avail, i.e. disabled NIC as bootable device, disabled the hybrid boot feature & flashed and tweaked some BIOS settings.
    The computer will not even shut down when I give the command "shutdown /s /t 0"
    I only had Windows Office and iTunes installed on the computer and suspecting that iTunes may be the culprit, I uninstalled it and now the computer shuts down without any issue.
    I have since read several threads about iTunes and shutdown/restart issues with 64 bit versions of Windows although I have not found anyone else with my exact issue.
    Is anyone aware of a resolution for this?
    For now I will need to install iTunes so I can sync my phone and then uninstall so I can shut down!

    Fingers crossed there will be an update for this, I was lucky that my install so was new that there weren't very many things that could have caused it because I don't think it would have ever occurred to me that iTunes was the issue.
    I literally tried every other possibility before waking up in the middle of the night and realizing that the problem started right after I installed iTunes.
    I have had issues with Apple software in the past where I attempt to disable it from launching automatically when I boot the computer and it will simply create another entry for itself in the startup list.
    If I disable that one it makes another, and another and another.... It's like the freaking Apple hydra.
    The want me to know how much I need them! lol

  • After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

    After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS3258 error 42404 after installing iTunes 10.6

    I'm getting the above error after installation.  Now itunes won't recognize my ipod.  What do I do?

    After installing itunes 10.6, system does not connect to itunes, it kepps on saying "Accessing itunes store".
    I'd start with the following document with that one:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • No cd drive after installing itunes

    Hi,after installing itunes to my packard bell notebook i noticed that i had no cd drive showing in 'my computer'when trying to start my cd writer it showed 'no recorder'.i've had to uninstall itunes and download a update from roxio to get my cd writer back again.please can anyone help me with this problem.also is it possible to sync my ipod nano with windows media player without installing itunes.
    Regards,Tony

    No you can't use WMP to sync your iPod.
    You could take a look at Yamipod which allows you to manage your iPod without iTunes, but why not try and get iTunes working.
    http://www.yamipod.com/main/modules/home/
    There is a help on trouble shooting CD problems here:
    http://docs.info.apple.com/article.html?artnum=302974
    It sounds as though you want the link near the bottom on inability to use CDs.
    There is also a microsoft link on CD problems that you might find useful:
    http://support.microsoft.com/kb/314060/

  • I can not open different sites after installing itunes. Why?

    I can not open different sites after installing itunes. I can`t open google.com or youtube.com. Why?

    Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • Svchost.exe errors after installing iTunes 7.0.1.8

    I have two computers that starting throwing svchost.exe errors immediately after installing iTunes 7. First it happened on my desktop. In preparation to reinstall Windows XP on my desktop, I prepared my laptop to use while my desktop was out of commision. I installed iTunes 7 and immediately I started getting svchost.exe errors. I don't have the blaster worm on either machine (already checked). My desktop is behind three firewals, runs Norton, and I already did a full virus scan on both.
    This is causing significant problems as my computer can't see the network, outlook can wig out, and in general my machine is unpredicatable. I hate to think that installing iTunes 7.0 leads to the need to reinstall Windows. If anyone has any ideas I would appreciate any help.

    I changed my "Startup Type" for "Terminal Services" from "Disabled" to "Manual". Resolved issue.
    http://docs.info.apple.com/article.html?artnum=304434
      Windows XP Pro  

Maybe you are looking for

  • How to set the file.encoding in jvm?

    I have some error in showing Chinese by used servlet, some one tole me that I can change the file.encoding in jvm to zh_CN, how can I do that?

  • Connect wireless keyboard to ipad

    hi can someone tell me if a am able to connect my wireless mouse and keyboard (the one that came with my mac) to my ipad2 via wifi/bluetooth?

  • Restrict use of tab Components in Maintenance Order

    Hello guys.    I'd like to know if is there a configuration to restrict the use of modification Maintenance Order (IW32) to only the "Components" Tab? Otherwise, how can I implement this?    Thanks in advance. Gabriel

  • 8300 won't update when it arrives in new time zone

    I have tried setting time source "network" and "Blackberry" but in either case, when I get to the new time zone the time on phone is from home local and does not update.  On Date/Time page network time is displayed for all locations but on front scre

  • LOV max

    All what is the max that you can put in aN LOV as i am getting ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too small Add Row and the size is 5331