Sound Issues in Mac and Windows

I'm new to the forums so please don't flame me if there is a solution out there. I have a month old MacPro on 10.4.8. Over the past week my headset sound has been very spotty. Sometimes I can hear music with no vocals. My games play ambient sound but I can not hear characters talk. Videos on the web play with no sound.
If I fire up iTunes my songs play only instruments for left and right channel but there are no voices. I have the same problem with the rear output on the G5 now. Is this a hardware issue? In Windows using bootcamp I have the exact same problem... or sometimes no sound at all..
Any ideas?

Macs and PCs obviously render web pages differently. Unfortunately, many web designed optimize their code for IE, leaving many people with pages taht render slowly or not at all.
Some things I have discovered to speed up my Mac. Go into the network sys pref and make sure that the type of connection you are using - ethernet or Airport - is listed first. Go into the configuration and turn off IPv6 or if it is off, turn it on. IPv6 is new and not all ISPs support it. Having it in the "wrong" state can cause a problem.
Also, if there is anything in the DNS server box, write it down and then use "4.2.2.x" where "x" is 1-6. Some DNS servers are slow and using those values on my Mac and PC made a big difference to me.

Similar Messages

ITunes issues between Mac and Windows (31 character limit)

Hi all,
I'm in quite of a pickel and have not figured out a solution yet.
I am sharing an iTunes library via Dropbox with someone. I am on a iMac running Lion, and the other person is working on Windows XP.
That person is in charge of typing the metadata for some freshly imported albums.
Everything seems to be working fine besides one crucial point : when I open up the library on my end, I notice that all songs who's names contain more than 31 character are truncated - and not only the names are truncated but also are the wave extensions - so basically I can't even read the audio files from the library nor from the folder containing the audio.
The weird thing is that I often work with this person for entering my album's metadata but we used to work by sending hard drives. This works just fine so apparently it is not just a OS incompatibility issue - it's more of a dropbox-related problem.
Thanks in advance for any help you can provide.
Rob

What happenes when you try?
Error message?
What does it say?

Pen drive issue of mac and windows????

I've a SonyClick 8GB pendrive and i formatted the pendrive in my MacBook using FAT partition but when i connect it to the Windows 7 PC, it is not able to open the partition it directly says to format it....
And on Windows 7's disk management it shows 2 partition one of File Type - GBPT Protective and the another one file type is - RAW ...i don't get it, i formatted it using FAT still it shows RAW as a file type And what is GBPT Protective ???

You formatted the partition as FAT, but what Windows is complaining about is the partition table itself. Most Windows systems have a BIOS that supports a single partition layout scheme: MBR. OS X (and, actually Linux too) understands several partition layout schemes, but GUID-based partition tables (GBPT) have been the default under OS X for some time.
On EFI-based Windows servers, a disk with a FAT partition and GBPT partition layout ought to be readable. Chances are pretty good, though, that you don't have an EFI-equipped Windows system.
In OS X, you can specify the partition type using the Erase function in disk utility. Erase the disk, and select the MBR partition type. Then create your FAT partition. It should be readable on just about anything.

What type of hard disk should I use if I want to use it on mac and windows?

Hey Forum,
I am using windows xp on my macbook (snow leopard). I came across some dealers who say that there are hard disks for mac only and for both mac and windows. So, I wanted to buy a hard disk so that I can use it both on mac and windows xp, so what type of hard disk should I use? Must I partition into 2?
or are there any harddisk in the market which is compatible for both mac and windows xp without screwing up the format(NTFS/Mac OS X Journaled)? Pls look into this matter and help me with it.
All of your replies and suggestions is much appreciated.
Thank you.
Ala.

Run, don't walk, from that dealer! and never look back
Once in a very long while Apple will have customized firmware on drives, and it is possible to find SCSI/SAS or drives that are destined to be used with high end storage controllers.
But that is the exception that makes the rule.
SATA is SATA. Though.... there are now SATA III drives that don't work in XP, or that need a jumper, and Seagate and some drives have managed to deliver firmware that has caused trouble... and Apple has had to issue firmware updates to help compatibility....

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

Setting up a small business network using mac and windows pcs

Setting up a small business network using mac and windows??

Ok that sounds great. What is your actual question as it relates to AirPort networking? Is it: Can I set up a wired/wireless network with an AirPort base station that support multiple Mac & PC clients? If so the answer is yes.
If, instead, it is how to I configure an AirPort network to support a small business you will have to provide more details on both your networking & computing equipment in order for any of us to help you.

Best external hard drive format for use with mac and windows?

This is more of an apple operating system combined with windows operating system question, but being that my OS will upgrade an fluctuate there is not option to choose in the operating system section.
Anyways to the question(s)
This whole prbolem came about when my computer started having issues, I want to back it up and whether I can continue to use my laptop or not I will still be owning an apple in the future. I went to buy a hard for back up and got told that it is not as easy as one would think to transfer files from mac OS to windows OS and vice versa. I have a mac, my boyfriend has a windows computer; we share files. Mostly I just copy his files, but once in a while I give him files too. I have read up and talked to people and only found one solution so far to format the external drive to fat 32 or exfat. I think only mac has the exfat option, but works well between both OSs, correct me if I am wrong.
What is the difference between fat 32 and exfat?
A user posted some good info about formatting. More specifically .Drives, partitions, formatting w/Mac's + PC's
https://discussions.apple.com/docs/DOC-3044
If I do not want to use fat32 or exfat is there a format type that works great for mac saving that I can still at least save files to that were originally on a windows computer? Such as I copy his files from his external drive to my computer and then save them to my external drive.
Is there a better format for file sharing between mac and windows that does not set a 4GB limit?
And a silly question, Can you dual format a hard drive?
Note: This format is for an external hard drive.

I still do not know which format would be the best. That is so that I can use it easily between mac OSX and windows. Is FAT32 the only true option? How limited is it? I heard it is limited to 4GB file size for windows and 32 GB for Mac. Are there other sources I have not found with more concrete information on the limitations of this format?
I really do still need this information and I need to back up my drive before I can take the computer in for service.

1 hd with 2 file formats for use between mac and windows?

Think this is the right forum...
I want to instal a program onto an external hard drive for use on both mac and windows. The program supports both mac and windows.
My plan is to get an external hd and partition it in half. One half i will format mac os extended and the other i will format ntfs. I'll instal the mac version on the mac partition and the windows version on the ntfs partition.
This should work i'm thinking, yes? I.e. when i plug it into windows it'll run the windows installation no problem and when i plug it into the mac it'll run the mac installation no problem?
Thanks.

An easier solution might be to just connect the drive to a Windows PC and format it as FAT32. Both Windows (98 and higher) as well as Mac allow full read/write access to FAT32 formatted drives. No need to download any drivers, etc. It just works.
Yes, this solution is not perfect, but none are. The free NTFS drivers for Mac are not most efficient drivers for speed/performance, the HFS+ drivers for Windows are not cheap, and have their own performance issues, and FAT32 has the limit of file sizes over 2GB (or is it 4GB now?) not supported. No one solution is perfect, but for the many one is better than the others, but it all depends upon their circumstances which is "better".

Help: symbol shifting between mac and windows, flash cs3

I'm doing work reviewing flash files created by other users
on mac and windows. I'm using os x 10.5.6. When I open a file
created in windows / flash cs3 some symbols on the stage will have
shifted upwards on the y axis. If I correct the shift and then send
it back to the windows user they see the symbols incorrectly
aligned, as if I had moved symbols around on a correctly aligned
file.
The strange thing is not everything on the stage is shifted.
Only particular symbols will move, and it's usually symbols only
(not text frames, drawing objects, etc).
I believe there's a general history of bad behavior when
saving flash files and trading them back and forth between mac and
windows, but does anyone know what may be causing this? Or a
remedy?
Thank you in advance.
Peter

also, I tried opening the same files in vista using a mac
mini with vista installed on a bootcamp partition. When opening
other windows authored flash files there I had shifting issues as
well, so I'm not convinced it's strictly a mac vs. windows issue.
Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
and vista flash cs3...

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Syncing between mac and windows

I have an issue where I have created files in Adobe Draw (and previously in Ideas) which I have then saved to the Creative Cloud. I open these files in Illustrator on my Mac, save them back to the cloud then open them on a Windows PC. When I save these files on the PC, I get the Unable to Sync Files error message. I have gone through these solutions Error: "Unable to sync files" but no solution applies. If I create a file on my PC, it syncs fine. Is there a known issue when sharing files between Mac and Windows? I can save the files to Dropbox or email them and I don't have this issue. Thanks

Hello,
Would you be able to send me your log files so I can better see what might be causing this issue issue. I will need Logs from both your Mac and Windows machines please.
You can find your log files at...
Mac:
/Users/<username>/Library/Application Support/Adobe/CoreSync
Windows:
C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
please upload them to Creative Cloud and send me a link to the logs at [email protected]
Thanks
Warner

Using Time Capsule with Both a Mac and Windows PC

All ... is it possible to backup both Mac and Windows computers to the same Time Capsule? My current networked devices include:
1 Windows 7 desktop (wireless/ethernet capable)
1 MacBook Air (wirelessly connected to home network)
1 New iPad (wirelessly connected to home network)
2 iPhone 4S (wirelessly connected to home network)
1 Airport Extreme (currently hardwired to my Windows 7 desktop)
Thoughts/comments on leveraging the Time Capsule as purely a backup storage solution for all the devices listed above? Is it possible? Please advise. Thanks!

I use a backup software to save backups to the TC from windows... it is no big issue.. but the TC should never get any where near close to full.. TM takes a lot of space to work efficiently.. so make sure there is still more than enough space.. since TM will do hourly incremental backups it can grow rather quickly if you do lots of big file edits on the Mac.
Hanging a USB hard disk off a windows desktop is a better solution in lots of way.. it can be formatted native windows NTFS.. and is faster than TC without adding to network bandwidth.
But the TC is great for wireless with windows laptop same as Apple side.

[svn:bz-trunk] 13744: Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)

Revision: 13744
Revision: 13744
Author:   [email protected]
Date:     2010-01-25 01:14:09 -0800 (Mon, 25 Jan 2010)
Log Message:
Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)
QA: No
Doc: No
Checkintests: Pass
Details:
-Don't start the server before unit task, unit task already checks if the server is not running and starts the server.
-Don't stop the server after FlexUnit tests, JUnit tests need the server running, and they will stop the server after they are done.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-481
Modified Paths:
    blazeds/trunk/build.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml

Tony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

What format for my external drive allows use with Mac and Windows?

I got an external hard disk (1 tr) and i want to used it for my windows and mac, i read i can have two partitions one for mac and one for windows, but i dont really want to have two parts, and I read i can format it by fat32 and i can write and read on both os, is that true?
I want to use it for movies, os backups, and files..
Is it true that i can only save files up to 4 GB when the format is fat32?
please advise..

It this case you would need to to go to "Disk Utility" on mac and select 3 partions which will be under the Parition Layout in my screen shot below. "Current" is grayed out that will drop down select 3 partitions and make one NTFS, second Mac OS Extended, third FAT32. Using the FAT32 for both Mac and Windows but the files have to be under 4GB each.

Sound Issues in Mac and Windows

Similar Messages

Maybe you are looking for