Sound Issues using iSight

I am using iMovie 7.1.4 and when I try and record video & sound using the built in iSight camera, I get pictures but no sound.
I know the audio settings are correct in the System Preferences as I can record a voice-over using the built in mic. Thoughts / help anyone?
Thanks in advance, Andrew

Andrew Swann wrote:
Sorry, that's my mistake... I changed the drop down menu on my OS (but forgot to change it on my next post). It is indeed 10.6.6.
However I've managed to sort the issue out with a bit more research (thanks to your post). The 'noise reduction' settings were turned right up in the Voiceover recording panel... which despite not affecting the 'voiceover' recordings as much, they had in turn effectively muted the mic during video recordings.
So I've turned them down and got sound back on both types of recordings.
So thanks
You're welcome, Andrew.
Thanks for using the Answered start to let us know you have resolution.
BTW, 10.6.7 is now available: http://support.apple.com/kb/DL1361
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.7)
MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.7)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11)
iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.3

Similar Messages

  • I am having sound issues with Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmated. I can hear samples of audio books in the store section.  Any ideas?

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

    I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section.  Any ideas? I have reset Safari.  Website works fine on Firefox.

  • Strange sound issue on iPad2

    my mom is having odd sound issues on her iPad 2 that i was able to somewhat fix. and it goes from fixed back to broken o.O
    i thought it was interesting and worth mentioning, in case this happens to anyone else.
    her iPad 2 is up to date on the latest iOS (5.0.1) and the issue occured while she was watching a video in YouTube. sound is totally off in all apps. in Settings>General under 'use side switch to' it is set to 'mute'. when going to Settings>General>Sounds the volume control for ringers will work and cause the ringtone to play, so it seems the speaker itself is fine. however it will only work there and for that short time. afterward sound will continue to remain off. the volume control on the side of the unit will bring up the on screen speaker icon, except it doesnt show the bar that usually goes up and down with the volume. and sometimes at the top of the grey box it will say 'sound effects'. ive also tried switching the mute on and off which changes nothing.
    the one thing ive found that changes anything is the multi tasking bar volume control (double clicking the home button and then sliding all the way to the left, where it shows a screen orientation lock, brightness slider and a volume control bar). now the volume control bar is unfilled and doesnt show the dot that you can slide up and down to change the volume. however when i plug the iPad 2 into a computer (any computer seems to cause this) the volume control bar will suddenly fill and the dot will appear. now suddenly sound works in all apps and will change with the side control again as normal.
    now heres where it gets even weirder!!!
    sometimes when unplugging the iPad 2, after a short while volume will slowly fade out and be unresponsive again. the side buttons stop working and the volume control in the multi tasking bar will be unfilled and unresponsive. repeatedly plugging it in, going back to the multi tasking bar volume control and unplugging will eventually bring volume back. a couple times ive gotten volume to stay on and the volume bar to stay responsive by unplugging it while im in the multi tasking bar. but sometimes this is not the case.
    for the record, ive tried 'turning it off and on again' and resetting all settings and erasing all content and settings (both with starting up from a back up on iCloud and PC, and starting up as a new iPad). ive used two different laptops, one with Windows Vista and one with Windows 7. the iPad is synced with one laptop but aside from using iTunes to back it up and for charging, ive not made any changes to the iPad using these devices. during the entire duration of my attempts to fix it, the iPad has been on no lower than 80% power. ive also called Apple and discussed this with an Apple Care representative. who suggested all the same things id already done, and walked me through all the fixes to make sure i didnt skip anything.
    hopefully and most probable is that its just an issue with iOS 5.0.1. i also have an iPad 2 thats up to date with 5.0.1 and ive not had this issue, YET.
    i just thought it would be beneficial to the community to share this issue and get word out that this is happening. i would like to hear everyones thoughts on this issue and if this has happened to anyone else. the Apple Representative that i spoke to had not heard of or had to deal with this issue so it sounds like its rather new or rare. though she did mention that this is not normal behavior for the device and might be a software issue.
    id like to conclude with my love for Apple, and how user friendly iDevices are in general. ive had iPods from the very first generation and all of them still work (though the older ones cant be updated past a certain iOS). the few issues ive ever had were easily fixed with a visit to the Apple Store or searching on the Apple Support Communities. so as with before, i will remain positive and look forward to a bug fix in the next update.
    -thanks in advanced for reading, and any comments
    Paper_Dragon

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Sound issue on iphone 4 - 7.1.1

    My mom has an iphone 4 that was handed down to her from my sister.  After one of the ios updates...can't remember which one...the phone stopped giving audible notifications for text messages.  As I have tried to troubleshoot this issue I have discovered the other following problems:
    The phone will not play music on any speaker.  I was trying to connect the phone via bluetooth to a speaker bar and when I tried to play pandora, I got nothing.  I then disconnected the bluetooth to see if I would get sound out of the phone's speaker and got nothing.  I attempted to play a downloaded song and got nothing.
    I then tried to see if I could find other issues and I did.  When I go into settings>sounds>ringtones I can switch ringtones and hear the ringtone sample.  When I go into settings>sounds>text tone, I can select any tone in the list and all I get is a vibration, no sound at all from any of them.
    I also found that when pressing the volume up and down buttons on the side of the phone do not produce the pop up box that shows volume going up and down
    I believe these three problems to be related as some kind of systematic software bug.  Can anyone confirm this or offer a possible solution. Keep in mind the phone does make sounds when someone calls also from the speaker phone.  The only non-sound issues are text notifications and playing music.  I find this to be a rather important problem because the phone can really no longer be used as a phone since my mom continually misses text messages because she does not get an audible notification.

    Hello hiknmt06,
    You may need to restart or reset the device.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Should the behavior continue, it may be necessary to restore your iPhone.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • R5K Sound issues when installing Windows 8.1

    Hello everyone
    I installed Windows 8.1 Pro as downloaded. I used BCA > USB on my R5K to install Windows.. (Boot Camp drivers via BCA as well). Everything works fine except the sound when using Windows. There is sound, but it all... sounds disturbing, like listening to a radio. Nothing like the sound quality when using OS X, no epic sound effects and crystals clear sound whatsoever. And I think it's not even using all the speakers at the bottom of the iMac when producing the audio. I tried playing with Sound setting in Control Panned, with the audio settings in MPC, VLC, iTunes, re-installed the drivers just to be sure nothing went wrong with the installation and nothing work, I am still getting that "crappy sound quality"...
    I am welcome to any suggestions, spend half a day just trying to fix this... Thank you in advance

    Does Apple Diagnostics indicate any hardware issues?
    Using Apple Diagnostics - Apple Support
    Apple Diagnostics: Reference codes - Apple Support
    Do you get proper sound on the OSX side?

  • Sound issues with MacBook Pro

    I am experiencing sound issues with my MacBook Pro. I am using a headset and when I am on a skype calsl I have a hard time hearing the other person, the sound is coming in and out and sounds digitized. This issue only started recently, the sound had been working fine for years before this issue.

    I do not use Skype, but may be  information from the  below linked article helpful.
    https://support.skype.com/en-us/faq/FA10992/Why-can-t-I-hear-the-other-person-in -Skype-for-Mac-OS-X
    Best.

  • Sound issues in iOS6

    I'm having random sound issues since upgrading iPhone to iOS6. For instance, after using iMessage I will sleep the phone without exiting iMessage. 5 mins later I will have messages sent to me but there were no sound notifications indicating such. Only if I exit iMessage prior to sleeping the phone will I hear notifications of new texts or iMessages.   Also, random sounds like the swoosh when sending an email will mute randomly. I have to shut the phone off and restart before it works again.    Why is this happening?

    If you have a iMessage open and into a message, normally it will not sound.  I think it is because you already have it open and in it.  That is what I have noticed.

  • What is a packet problem? I'm having sound issues.

    I'm at my wit's end. I am having sound issues. I've run diagnostic tests and everything comes back as OK, but it's not OK! Something somewhere is messed up and I can't figure it out.
    I have been to the help rooms on paltlak and opened up support tickets and everything they told me to try has not helped. They suggested I change the sound tuning on my chat program, change exceptions on my firewall, uninstall and reinstall chat program, uninstall and install earlier version, download drivers for sound card, and etc. Nothing is helping this problem.
    Someone mentioned that it may be router problems or packet problems. I'm not sure what that means, and that is why I'm on this forum asking for help. I have no other sound problems on my computer. My music and videos play fine. It's just when I'm in a voice enabled chat, do I experience these problems, or if I'm on a website that has videos, the video will not load all the way, so I only get 30 seconds of a video. Does anyone know what could be causing this?
    I have used this chat service for over 5 years and up until a week or so ago, it worked fine. I did a complete reformat of my computer in hopes that it would help, but I'm still having the same problems. I lose sound within 5 seconds of entering the chat room. Then it takes between 3-5 minutes before I hear sound again, but then I only hear it for a few seconds. Then it goes away for another few minutes. Repeat. Over and over again.
    I'm running Windows Vista on an Acer Aspire 380 with wireless cable modem. I keep losing sound in any voice/sound enabled chat and on any site that has videos. I have 1gig of ram, 300 gb hard drive, 32 bit operating system, 2 processor cores, directx version 9, realtek sound card. Everything is up to date, and firmware is up to date. My speed test is: download: 6.162 mbps and upload: 926 kbps.
    When I do the ipconfig/all, it shows
    Tunnel adapter local aera connection* 6: Media State: Media disconnected
    description: teredo tunneling pseudo-interface
    dhcp enabled: no
    autoconfiguration enabled: yes
    I don't know if this has anything to do with my sound issues on the chat program or not. ??
    Also shows:
    node type: hybrid
    dhcp enabled: yes
    autoconfiguration enabled: yes
    default gateway: 192.168.1.1
    dhcp server: 192.168.1.1
    netbios over tcpip: enabled
    If by chance it is a packet problem, how do I fix that?

    Hi. Thanks for the quick reply. Yes, it just started recently and after not being able to fix the problem, I completely reformatted my computer and started with a fresh slate, but still having the same problems. The videos will not continue to load. They get less than half way and then just totally stop loading, therefore I only get to view the video up to the point where it stops loading. I just took your advice and I disconnected the router and connected my computer directly to the modem and my sound issues were fixed. I went into the voice chat and had sound for over 10 minutes (and then I disconnected) instead of the usual 5 seconds that it'd been. So is it the linksys that is causing this? If so, how can I fix it? Thank-you. Message Edited by nightrider7000 on 01-22-2008 11:34 AM
    Message Edited by nightrider7000 on 01-22-2008 12:44 PM

  • Battlefield 2 huge sound Issue!Creative statement plea

    Hi guys..
    I had once this problem with the DVD playback if some can remember...i couldnt find any solutions so i formatted my system...then reinstalled everything and look there...wow extrem powerful sound,clean and crisp!!! Awesome **bleep**!
    GTA San Andreas is working fine, now since 2 days i have Battelfield 2 and there is an enourmous sound issue...you play the game a bit..all of a sudden(before fluent gameplay,no problem)sounds start to stuck alot when you listen to the guy talking to its like hes talking in slow motion and the whole sound starts to get grazy...and the performance drops then down to a level where the game is just not playable...me friend has this game 2 and gues what he has the same problem and last guess...he has an audigy 2...suprised?
    If anyone knows this problem and know how to fix it pls let me know...
    and i would like to hear from creative a statement if this is their fault or ea's?
    All other games run supreme,i mean that in the soundish way.
    thx in advance

    I had the same problem with the radio in my game. Turn it from hardware to software mode in the audio options. You'll still get good sound, but it might run a bit slower, as it uses more memory.

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

    So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
    Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
    Can anyone suggest a solution to this vexing problem?
    Thanks in advance.

    Jeremy.Laurin,
    have you tried agb76’s approach here?

  • Toshiba laptop hardware NO SOUND issue - I've tried everything!!! PLS help!

    I have a Toshiba Satellite tablet laptop Model R25-S3513 model... the sound initially started acting weird, sounding funny like skipping, or fluttering (?) eventually laptop internal speakers stopped working all together.
    I bought some head phones, they worked fine via head phone jack on front, for about 6 months... and then that went south too... I bought some external speakers to try on it, they work on my friends laptop, but not mine! Now the volume control won't even appear on screen anymore!
    I've un-installed and reinstalled, updated drivers, rolled back the driver, went through the troubleshooting scenarios to no avail... and I am SO frustrated!
    I have read that my laptop has an integrated sound card - does this mean I can't replace it?!!
    I have read that I can enhance my sound by using a PCMCIA sound card or a USB sound card - but can I really enhance what isn't working in the first place??? What do I need to do here? I appreciate anyone's help at all!
    Denise

    I have this same issue.  U205-s5034. Sound went out after an update to Windows XP.  Tried many things, yet nothing worked. So I did a custom install of Windows 7, including all the new drivers.  Still no sound.  No device in sound Device Manager either.
    Is it possible the integrated sound has died?  I have tried installing the drivers in many ways, including from safe mode.  Same results always. Just a speaker with an X and the note that there is no audio device.
    Is it possible to replace just the sound hardware or is the fact that it is integrated mean I must replace the motherboard?  I understand I could purchase a sound card?  Any suggestions?

  • Newly installed Arch with gnome3 - Sound issue

    Hello fellow archs!
    I'm having such a huge issue at the moment with the sound.
    Got alsa installed, and alsaconfig cant find a thing on my motherboard.
    I will try to post the essential information so maybe someone will notice that I have done something wrong
    lspci | grep Audio
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
    Now one wierd part:
    Doing aplay -l in gnome terminal
    aplay -l
    aplay: device_list:240: no soundcards found...
    Straight from terminal before starting gnome up
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    I checked in modprobe and tried to follow the guide http://ubuntuforums.org/showpost.php?p= … ostcount=2 but couldnt find my ACL889 inside the list for model, I just tried something.
    # /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    options snd-hda-intel model=6stack-dig
    blacklist snd_intel8x0m
    Please help! This new gnome3 looks really nice and nothing else except the sound issue seems to be wrong.
    Thanks.

    blargh wrote:
    Hey guys, thanks for the help...
    I was clicking around and noticed why i didnt get aplay -l correct. Wasnt it the group audio with my user..
    But! I noticed something. I can't add my soundcard as my default one, but I can sure see it in alsamixer if I pick it.
    I have been trying what the wiki been saying, either do it by kernel or use of the ~/.asoundrc which doesnt work as I get the message that the file is either to old or corrupted.
    lsmod|grep '^snd' | column -t
    snd_hda_codec_realtek 297871 1
    snd_hda_intel 22186 0
    snd_hda_codec 77703 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 6342 1 snd_hda_codec
    snd_pcm 73736 2 snd_hda_intel,snd_hda_codec
    snd_timer 19488 1 snd_pcm
    snd 57384 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
    ls -l /dev/snd
    total 0
    drwxr-xr-x 2 root root 60 Jun 16 18:23 by-path
    crw-rw----+ 1 root audio 116, 8 Jun 16 18:23 controlC0
    crw-rw----+ 1 root audio 116, 7 Jun 16 18:23 hwC0D2
    crw-rw----+ 1 root audio 116, 6 Jun 16 18:24 pcmC0D0c
    crw-rw----+ 1 root audio 116, 5 Jun 16 18:24 pcmC0D0p
    crw-rw----+ 1 root audio 116, 4 Jun 16 18:24 pcmC0D1c
    crw-rw----+ 1 root audio 116, 3 Jun 16 18:24 pcmC0D1p
    crw-rw----+ 1 root audio 116, 2 Jun 16 18:23 pcmC0D2c
    crw-rw---- 1 root audio 116, 1 Jun 16 18:23 seq
    crw-rw----+ 1 root audio 116, 33 Jun 16 18:23 timer
    Tried to remove pulseaudio by sudo pacman -Rd pulseaudio.. but it has so many depencies so it doesnt let me.
    Any Ideas?
    wrong approach - if using gnome-shell it does need to be there.
    I not only have an idea ~ but i do know how to fix your problem (i just need to read up, because off-hand i can't tell you how to do it).
    i ALWAYS disable PA - because it is crap!   i also think it is stupid that gnome -developers decided to make it a static dependency, when there are so many issues with it.
    i'll get back to you in a little while, okay?  (sometime later tonight, i just got home from work and need to relax / eat / etc..
    cheerz

  • Sound Issues with Mac OS X 10.4.10 ?

    I had successfully updated to 10.4.10. However, now whenever I use iTunes and start a song, I get a "Pop" noise from my Creature II speaker system. After I stop the song and a few seconds later, I get a "Pop" noise from my speakers. So, it sounds like the MacMini is initializing the speaker before and after playing sound through the sound card. I don't know. Has anyone has issues with this "Pop" noise? Is there a setting I can look at to get rid of this "initializing" sound? This is driving me nuts! I do not remember this "Pop" sound during my normal usage under 10.4.9. Thanks, Tony.

    My wife's mini had a similar issue. She upgraded to 10.4.10 and her sound stopped working. She would also get the login screen freezes. Where her computer is located, turning off Airport is not an option, and the sound issue is very frustrating. I helped her restore her entire computer from a 10.4.9 backup she had made just a couple days before, and while the lockup problems are gone, the headphone jack still will not output sound. Just two pops when you plug the speakers in, and that's it. I've tried resetting the PMU with no luck. I hope Apple fixes whatever it is they screwed up, and soon. I won't be applying 10.4.10 to any of my other machines.

  • VOIP Sound Issues

    Hi I have a new MacBook Pro and am experiencing terrible sound issues with both iChat and my VOIP. I use a belkin router for the Linksys modem from Verizon.
    1. Will speakers help with the iChat Sound
    2. What router do you recommend for VOIP. Will Airport Extreme work?
    3. Any tips for getting this working right?

    Please describe your sound issues in more detail. What exactly do you hear or don't you hear?
    Could it be a right speaker distortion as described in this thread?
    http://discussions.apple.com/thread.jspa?threadID=388368&tstart=0

Maybe you are looking for

  • My Toshiba external hard drive won't mount after OSX Mavericks update. Please help.

    Two days ago I updated to Mavericks 10.9.3 and prior to this, my Toshiba 1TB external hard drive worked perfectly well. Since the update, my hard drive will no longer mount. It shows up in Disk Utility but will not let me 'mount', 'verify disk' or 'r

  • Uninstall & Reinstall RAC (10GR2) on Solaris 10 SPARC

    Hi, I'm trying to install 2 node RAC. I got below errors while executing "root.sh" at the end of installation on both nodes. [client(19083)]CRS-1011:OCR cannot determine that the OCR content contains the latest updates. Oracle Database 10g CRS Releas

  • Record set size in Gantt Chart

    Hi all, I am developing an application that has a Gantt Chart. The tree drawn is a 2 level tree. I have two VOs. The second VO (Child) has more than 20 rows. I want to show only 10 child at once. Record set size attribute is the one that is used to r

  • Quarterly & Half yearly appraisal in objective settings and appraisals

    Hi, I've customized the Objective Settings and Appraisals, created a template with part appraisal & its working properly. In my company the appraisals take place every 6 months i.e twice a year. If I create an appraisal document for an employee with

  • JFileChooser doesn't close?

    Hi All, I'm working on an application which has a button actionlistener that calls a method to open a file using FileChooser. I can click the button and get the filechooser dialog box and select a file, but then the filechooser seems to be repeating