Sound Lag on Recording with Soundblaster X-Fi Titanium

Hiya, I've got a Soundblaster X-Fi Titanium but I'm having some trouble. When I put my mixer into the linein/mic port -- and put it on speaker to hear it, whenever I play something it comes out of the speakers like half second later. I tried recording in a music program and same thing, it has big lag. Anyone know how I can resolve this? Thanks a lot really appreciate it
Mike

Check these two settings in Windows:
and
-Jeff

Similar Messages

  • No sound during record with soundblaster for Vi

    I have Windows Vista and am using Audigy Advanced MB Sound Blaster Wave Studio to record music from a multi-track recording source. Wave Studio records it just fine and will play it back well, but I can't hear the music while I'm recording it, which is necessary for me to hear levels of various instruments as they appear in the song, etc.. I've spoken with Dell and Creative and both sides tell me the other one is responsible for support for this item. I find it hard to believe Creative doesn't support it's own product, or at least supply me with an instruction manual.
    Does anyone know of this problem, and is there a fix for it's? Neither Dell nor Creative are helping me in the least bit. P.S. This feature did work on a previous version of the Creative software on a previous computer that ran Windows XP. Now I've got a new computer with Vista, and a new Creative software disk that is made for Vista. Any suggestions??

    Thanks. It worked. I was equally frustrated. I just followed your text and now, hopefully, we are back on track!
    Many thanks for your posting.

  • The sound is not recorded with video, Why?

    I recently recorded a video for the first time and found no sound does anyone know what I have missed out on I have notused it since upgrading to OS7

    Hi Phlupman,
    If you are having issues with no sound on your videos, you may find the following article helpful:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Regards,
    - Brenden

  • Sound crackling while recording (X-FI TITANIUM)

    Hi. I previously posted a problem with sound recording with the X-Fi Titanium (PCI, non-Fatalty)? on this forum. I thought the problem was fixed, but in reality it was just not noticeable. Now that I am trying to record in-game footage, it's nearly unbearable. Every few seconds, a crackle or pop sound of varying volume and length comes into the recording. There's no problem with the output of the card whatsoever; in fact, when I'm recording the in-game audio, I don't hear a thing as it occurs. It's only during playback that this happens. What could be causing this problem? I'm up to date on all drivers, I think (6.0..347, according to my Control Panel)
    I'm running Windows XP 32-bit on a P5E motherboard with an X38 chipset, an Intel Core 2 Duo E6750 at 2.67 GHz with 2 GB of ram, and an nVidia 250 GTS. I am not overclocking, and I am running on default fan speeds. I've heard of crackling and popping problems on 64-bit operating systems, but never on 32. I've run out of things to try, so I am now turning to the community to help. Any suggestions?
    EDIT: I just remembered that I have an onboard soundcard on my motherboard that was deactivated when I installed the new one into my computer. Could that be causing the problem?
    EDIT 2: I wanted to clarify one thing. The crackling sound is loud, but it lasts from a second to three seconds then goes away for fi've seconds or so, and then comes back. It isn't constant or muted - it even goes louder than the volume by which I'm currently recording. I've never read about this problem, and every other topic seems to refer to a constant crackling.
    EDIT 3: I used Audacity to record an example of the problem I'm getting. I don't hear any of this when I play the song; only when I listen to it back. It's the Prelude from the Final Fantasy series (pardon the nerdiness). It skips to halfway through about fi've seconds in to get to a louder part, to better demonstrate the problem. And no, you aren't getting Skype messages, I was just receiving them while recording "What U Hear" with Audacity. I hope this hel
    ps.
    http://www.tindeck.com/listen/xkje

    Same thing here... X-Fi Titanium Fatalty Champion, P5E3 Deluxe (x38)..using Windows XP SP3
    check it out ftp://ftp.int3.ru/X-Fi_Recording_Sample.rar

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Sound recorder with ActionScript

    Is it possible to build a sound recorder
    with ActionScript? I know that you can
    do it with a Flash Media Server. But that
    requires a steam and a server.
    I just want a simple recorder/player so
    that a user could test and adjust the
    settings of his/her microphone by visiting
    a web page. A user should be able to do
    it without any server resounces, since the
    sound card/microphone/audio are already on
    his/her desktop.
    I'd appreciate any suggestions, with or
    without ActionScript.

    AFIAK not possible without a media server. But you can use
    the open source media server "red5". Its free and can do everything
    (at least thats what the developers say) the Flash Media Server can
    do.

  • I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

    I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

    See these threads for some possible solutions:
    Bluetooth and 10.7
    Bluetooth speaker error

  • My recorded footage without sound will not play, but will when recorded with sound, any ideas?

    Hi there community!
    I have recorded alot of footage on a digital Harinezumi 3 camera and have run into a problem in post production.
    Some of the footage is recorded with sound, and plays fine.  However, with most of the footage, i chose to turn the recording of sound off.  These files without sound will not play in any player, even when Perian is installed.
    These are the specs of the video I have been able to find out.
    File type: .AVI
    Video Stream: JPEG
    This is all I can find out, so I am thinking it is an M-JPEG file rendered as an AVI file.  VLC player says it can not play the video or audio format 'undf', whatever that means.  Another player says it needs a .moov encoder, but I do not see how this is possible.  I have also tried attaching audio to it via Logic 9 with no success.
    I am at a loss, and I really need this footage for a project.  Any ideas?
    Thanks for any help!!

    It won't let me post the video in the forum, so here is a link to it in dropbox.
    https://www.dropbox.com/s/k4nz8mg18p4thzd/Mountain%203.AVI?n=145237283
    Accessed the file at dropbox. Played the DropBox "display" file in scripted player, played the same resource file using the Safari plug-in, and then downloaded the resource file using the QT 7 Pro "Open URL" option only to learn that this file was an H.264 transcode and not your original file. Used the DropBox download option to download the original Motion JPEG file in AVI file container. File plays as is in both QT X v10.2 and QT 7 v7.6.6 players under Mountain Lion v10.8.4 on my system.
    Motion JPEG is one of the "lagacy" codec components turned off under Lion and which remains turned off under Mountain Lion. However, as I understand it, Motion JPEG files are supposed to be passively supported (playback supported) under these systems but requires the codec to be turned back on if you wish to export files using this codec. I turned both Motion JPEG and Motion PNG codecs back on quite a while back and have Perian installed which, as you can see, supplied the OpenDML version of the Motion JPEG codec component to actually play your file on my system. Unfortunately, since QT uses a LIFO codec component list generation strategy, I would have to remove Perian to test whether or not the system configured Motion JPEG component would then become the active decoder. (Did this a year or two ago but not willing to do so again at this time.)
    Suffice it to say, the file should play in QT on your Mountain Lion system assuming the correct version of Perian is installed, it is actually active, and you have no conflicting software or hardware installed on your system. Have posted an MOV file containing your Motion JPEG video data in case you want to see if it will play correctly on your system.
    http://downloads.walker4.me/downloads/Temporary_files/Mountain%203.mov

  • I'm having trouble recording a bass to go along with a recording I dropped into GB.  I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record.  What am I missing?

    I have the bass connected to my imac with an interface.
    I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
    Am I missing something ?
    Please advise.
    Mike

    Double check all your audio settings. 
    System Preferences --> Sound --> Input should be set to your audio interface.
    GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
    With your track selected, open the Track Info pane, and select the Edit tab.  Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

  • Ridiculously Awesome Sound Recording with Video

    Although I was aware that the mic's on the 928 were touted to be better at recording loud music than most other phones out there, I never had a chance to put it to the test.
    Last week I was at a small bar and recorded my friends band playing. I was really close to the speakers and they were fairly loud.  I made sure to turn off the sound filter in the recording setting of the video.  Just for comparison, I had my brother record with me on his Razr Maxx. The next morning I played the video back from my phone and plugged in some good earphones.
    OMG! No distortion at all!!!  Full clean bass!!!  Full mids and highs!!!  Crisp and Clear!  My brothers sound on his recording was a huge distorted mess! Anyone else have similar experiences?  TI wanna make sure this wasnt just some freak luck with video recording...

    First, what is the file format, and its specs. for the remote recorder?
    Though the rates of modern cameras and digital recorders SHOULD match 100%, in the real-world, they seldom do. This make perfect syncing a labor intensive process.
    One should do tests between the cameras and the recorders, to find out the % or error. Then, adjust their Audio to match first. As an example, one user in the PrPro Forum tested his Panasonic cameras, and his Zoom recorders, and found that the Zooms were off by 0.04% constantly. To correct this, he used the Time Remapping (with Maintain Pitch checked), and would apply that adjustment to all of the Zooms' files - perfect sync.
    As for the Waveform not displaying for your remote recorder, did you allow those files to completely Conform (creation of the CFA and PEK files, the latter is the Waveform Display)? See this article: http://forums.adobe.com/thread/726693?tstart=30
    Also, you should be able to increase the vertical zoom of your Audio Tracks, and hence any Clips on them, by hovering the Cursor over the junction between Tracks, in the Track Header, and when it turns into a = sign, with up/down arrows, click+drag. Then, you should be able to find commonality in the beginning, to sync up to. Tip: for this critical work, toggle the Snap feature OFF, with the S key.
    Good luck,
    Hunt

  • Sound lag with X-Fi Titanium Fatal1ty Pro Seri

    Hello to you all,
    I just built a new computer and the problem I have is that sound lags with WMCE in Vista. My video card is ATI 4850 (52mb) and motherboard is 790gx. The internal sound and integrated video are both disabbled. Any suggestions as to fix the sound lag while watching TV on Media Center? I have no problems with music or games with this. Thanks to all.

    Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
    "Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
    So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
    I have created a support ticket hoping that this and the other post above might bring about a driver update.
    Will keep testing and post any updates.

  • My speaker does not pick up sound when i video with my iphone or use the speaker,  yet the voice recorder works?

    my speaker does not pick up sound when i video with my iphone or use the speaker,  yet the voice recorder works? any ideas why? thanks

    Speakers have never picked up sound.
    Microphones record sound.

  • HT1430 I have no sound playing videos from YouTube or playback of videos recorded with this iPad. Suggestions please

    Hello, I have no sound playing videos and no sounds when playing videos r escorted with this iPad. Sound. Is turned on under settings would appreciate any help please

    Sound is not turned on in Settings (except for alerts). Sound is controlled by the volume up and down buttons on the side of the iPad (in portrait mode). Make sure that sound is turned up with those buttons.
    Another thing to check: if earphones are plugged in the iPad speaker is silenced.

  • First time recording with digital drum kit in GB. Just got weak sound

    Hi first timer here. Just bought a usb midi interface from Roland (umg-1g). It has midi in and midi out. My drum kit is Roland td3. My problem is that i get a weird sound that doesnt sound like my drums sounds like for me when playing. It sounds weak and empty with no real punch to it. Do any one have any idea of what I should do.
    thnx !

    Sebastianp wrote:
    ut looks like GB has only one rock kit?
    correct
    Is there expansion kit for drums one have to buy ?
    the rhythm section pack has several more kits:
    http://www.bulletsandbones.com/GB/PluginsApplesJamPacks.html

  • Sound lag when playing games

    Hi,
    My Z1 compact has sound issues when playing games.
    There is a noticable sound lag of about a second (not much but is quite annoying), not only on newer games but also on the older ones, Angry Birds for example.  My recorded videos or YouTube don't appear to have the same issue.
    The problem seemed to occur after I had installed Worms 2: Armageddon when the phone got extremely hot and crashed. It was after the phone had reset and cooled down that I noticed the sound lag issue and Worms 2 was running at a very slow frame rate.
    I then installed Worms 2 on my ASUS TF201 and it runs perfectly with no sound or heating issues.
    I can't seem to find anyone else with this issue so i'm wondering if my phone is faulty.
    Any help would be much appreciated.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for