Sound Level and Quality in Macbook Pro 2.33

I recently bought a Macbook Pro 2.33 and I am disappointed with the sound level of the speakers which are not very loud at full volume and the the sound quality not as good as my old Compaq Presario. My old Compaq Presario is about 3 to 4 times louder than my MacBook Pro. Also the Compaq Presario uses JBL Pro speakers. I have not seen any info on Apples site with regard speaker types. I believe the forum needs to add a dedicated section to Audio in general. Yes, I know is a section for Logic and Garageband, but other users use different programs. Can any user please tell me about their audio experience with the MacBook Pro 2.33?

I don't think the audio is that bad. Maybe it's better on the 17" version. I know that it's louder and sounds more clear than my Toshiba Satellite. I also use external speakers when I really want to get good volume but I think my internal speakers do a good job. I will say that at half volume I get hardly any sound coming out at all though.

Similar Messages

How do I get a descent sound level and quality when exporting out of Logic ??

Hi guys,
I know this topic's been discussed many times before but I still can't fix my problem
I'm going crazy right now. It's been weeks I've been working on beats on Logic and I think they now sound pretty cool.
So I'm trying to export them out of Logic on mp3,or wav, or aiff but everytime it comes out very low. So when I'm applying different tips (limiter, adaptative limiter and different things I found on the internet... ) the sound level is a bit higher but still the quality is not as good as it is on Logic
So here's my questions : first, is it possible to get the exact same quality as the one you have when listening into logic ?
then how to get the best quality with a normal sound level so when you listening to the mp3 or wave or aiff on itunes just after a normal song you don't have to turn the sound up
Thank you very much for you help !!
Ben

And in addition to what octopi wrote ……
Related Articles:
Mixdown for Mastering - written by Holger Lagerfeldt
http://www.onlinemastering.dk/mastering-faq.html
Loudness when Producing and Mixing - written by Holger Lagerfeldt
http://www.gearslutz.com/board/music-computers/468170-loudness-when-producingmix ing-
tips.html
Overload in Signal Conversion - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2003_overload.pdf
0 dBFS+ Levels in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2000_0dbfs_le.pdf
Level Control in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_1999_level_co.pdf
Cheers

I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck!

No sound: alsa snd-hda-intel macbook pro

I can't get sound to work on my macbook pro and I'd appreciate some advice. lspci shows the following soundcard:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
According to the alsa sound card matrix, this card uses the snd-hda-intel module. I've followed the alsa article at http://wiki.archlinux.org/index.php/ALSA. Here's what I'm seeing:
# lsmod|grep '^snd'
snd_seq_oss 29312 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46800 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_pcm_oss 36896 0
snd_mixer_oss 14464 1 snd_pcm_oss
snd_hda_intel 286624 0
snd_pcm 68996 2 snd_pcm_oss,snd_hda_intel
snd_timer 19332 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_hwdep 7300 1 snd_hda_intel
snd 44644 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
# ls -l /dev/snd
total 0
crw-rw---- 1 root audio 116, 1 Nov 11 19:47 seq
crw-rw---- 1 root audio 116, 33 Nov 11 19:47 timer
# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.15 ---
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
# amixer
amixer: Mixer attach default error: No such device
# /etc/rc.d/alsa start
:: Restoring ALSA Levels [BUSY] /usr/sbin/alsactl: load_state:1327: No soundcards found...
[FAIL]
According to the wiki article, there should be controlC0 and pcmC0D0p devices under /dev/snd. I think the module isn't being installed correctly.
My system is a 2nd generation macbook pro. I've read that support for my card was recently added to alsa. I've had sound working under gentoo and debian by compiling snd-hda-intel statically into kernel 2.6.21. Can anyone give me advice on how to get this working?
BTW, I'm new to Arch, and I'm really impressed with it so far. Apart from sound, everything has worked well.

I'll give kamikaze-sources a try. Thanks. What exactly is kamikaze-sources? Neither the AUR page or the homepage (http://kamikaze.waninkoko.es) really explains it.
Has anyone gotten this this sound card to work in Arch and what exactly did you have to do? Unless kamikaze-sources is really easy to install, I'll probably just compile a custom kernel.

No sound when I connect my Macbook pro (2012) to TV via HDMI!

Hi! I have a problem with the sound when I connect my Macbook pro (bought in 2012) to a Phillips HD TV. The strange thing is that it only happens with some videos (specially youtube videos) but the sound works perfectly with films and audio files I have in my computer, and also when I watch TV online (Eurosport player for instance and other similar applications). It's even stranger because it doesn't happen all the time; last week I tried many times to watch some youtube videos and after unplugging the HDMI cable it seemed to work. As I said, with Eurosport player and many films downloaded in my macbook I don't have this problem (sound is ok all the time), and this is why I'm really confused. I suppose it's not a connection problem, otherwise I wouldn't have sound in any video, right? I've tried two different HDMI's cables but nothing has changed. Please, someone help me, as I can't figure out what's happening. Thank you very much!

Well Im not sure what the fix is for your problem, but can you please open up the sound preference next time you connect the philips tv, and make sure that sound output is set to hdmi out. Then try and play your video's etc and see if they are affected.
I can tell you I get a similar problem when, for example, I have a youtube window open and then connect the external display. The youtube video will not sound out through the cable, however if i refresh the window it works. Also the same when I use bluray player on mac, I have to close it and open it again for the sound to output through the external monitor.

Cannot log into Facetime iMessages and iCloudon my Macbook Pro

cannot log into Facetime iMessages and iCloudon my Macbook Pro. I am asked for my apple ID and password, provide them accordingly but I get a message that the internet connection is not working even though I am online!

Hello dermatas,
Welcome to the Apple Support Communities! It sounds like you are experiencing issues logging into iMessage, FaceTime and iCloud on your MacBook Pro. Let’s see if the steps in the following resource help to resolve your issue:
Get help signing in to FaceTime, Game Center, Messages - Apple Support
https://support.apple.com/en-us/TS3970
Cheers,
Matt M.

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

Hard drive sensor or logic board failure.
Try a SMC Reset, only thing I can help.
http://support.apple.com/kb/ht3964
Check your tones with this sounds like it's not recognizing the RAM, perhaps it's not seated well or making a bad connection or it's defective.
http://support.apple.com/kb/ht1547
Take it back. three times a charm

HT3235 I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" I bought mid 2009 to my old TV, the adapter doesn't seem to fit any of the connections, is this the right adapter?

I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" that I bought in mid 2009 to my old TV (svideo), the adapter doesn't seem to fit any of the connections on my macBook pro, is right adapter?

Shootist007 wrote:
Apple doesn't offer a MDP to AV or componet connect . Only DVI and VGA. They also don't offer one to HDMI. You have to go aftermarket to get one to HDMI.
Quite right, but as the OP does not have component or composite connections not important.
To the OP, this does work, but is not the cheapest, and as it appears that Apple no longer sell an SVideo adaptor cable 3rd party it will have to be.

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

I have Thunderbird installed on my IMac and on my MacBook Pro, The MacBook Pro Thunderbird is already set up. How can I copy Thunderbird settings to the IMac?

I have installed Thunderbird on my IMac and on my MacBook Pro. I have already completely set up Thunderbird on my MacBook Pro. How can I transfer all of my settings, bookmarks, etc., from my MacBook Pro to my IMac? Also, can I automatically keep both copies of Thunderbird synched so that changes on one computer are recognized on another computer.

Create a new profile and copy the old one over it.
http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird#Create_a_new_profile_and_copy_the_old_one_over_it

My wife and I each have an apple ID and share one macbook pro. Is it possible to use the iCloud on our shared macbook pro and our two separate iPhone 5's and not get each others information confused?

My wife and I each have an apple ID and share one macbook pro. Is it possible to use the iCloud on our shared macbook pro and our two separate iPhone 5's and not get each others information confused?

Once you setup your wife's account you can enable fast user switching to make it easy to switch accounts:
OT

I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro

I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro, is this possible if so how do I do it?

Providing specifics on all the ways to do this will take more time than I am willing to spend here these days. You can do some of this with Home Sharing. You can transfer the entire library from one computer to another, If you do that you can delete what you don't want from the transferred library.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder. If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
You do not want to use a new AppleID. Change the AppleID on the new phone to the old ID. Purchases made with one AppleID cannot be transferred to a different one and it will be a royal pain to manage two Apple IDs.
Change iTunes Store account on an iOS device - Log out of your current account with Settings.app > Store (Settings > iTunes & App Stores on iOS 6) > tap on your AppleID. Log in with a different account. Note, turning on automatic downloads or re-download past purchases may tie the device to that account for 90 days - http://support.apple.com/kb/HT4627 https://discussions.apple.com/message/18484935 - "In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account") When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again."

I updated to iOS 6 on my iphone 4 and updated my macbook pro with and now my mail is not working at all on my iPhone. I can receive/send on my laptop, but not my iPhone!! Can someone help?

i updated to iOS 6 on my iphone 4 and updated my macbook pro and now my mail is not working at all on my iPhone, whether on wifi or 3G. I can receive/send on my laptop, but not my iPhone!! Can someone help?

Which email provider are you using? If it's Gmail, try unlocking your account here: https://accounts.google.com/DisplayUnlockCaptcha.

I am traveling from the US to France and have a Macbook Pro. Can I just use a plug adaptor or do I need a power converter to plug in?

I am traveling from the US to France and have a Macbook Pro. Can I just use a plug adaptor or do I need a power converter to plug in?

Just an adapter to change the US plug style to the one in the country you are going to. The AC charger will do the rest. It is rated for 120-240 volts and will adjust on its own.

Sound Level and Quality in Macbook Pro 2.33

Similar Messages

Maybe you are looking for