Sound level icon frozen

THe icon for the sound level does not go off. It is frozen on the screen. I can still use the screen Advice please

Did you try rebooting the iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

Sound Level adjustment causes sound bumps in video

Hi, When I adjust the sound level on an MP3 track two sound bumps/thuds/heart beats are magically inserted into the center of the main video's audio. They do not show up at the point of the adjustment handles, nor at the transitions. In fact, when zoomed in a lot, they seem to be on each side of the video icon for the particular video segment. They come in pairs and are about a second apart. This isn't the sound glitches at the transitions about which many write. Anyone else experience this?
Thanks, Jim

I've tried that slider on iDVD with no effect. Not sure what it is for, in fact. Maybe someone else can help. David Pogue's Missing Manual book on iMovie and iDVD doesn't mention that control.
But I do know that to adjust the sound within the project, you need to be in iMovie. There are several editing tools to add sounds, adjust levels, etc. I have in fact found this to be the most time consuming part - not technically, but to produce a project where the sounds are not too loud or too soft, insert the appropriate background music, edit out peaks, etc. Techincally easy to do each piece but a lot of work to really get the audio to match and enhance the project.

Is it possible to change sound level up size in IOS 7 ??

Hi,
I want to know if it is possible to change sound level up icon like image below:
Please tell me if it is possible to resize it or to change icon position.

Not possible.

Sound level goes to z

Sound level goes to zero after short period of time such as (5) minutes. I reinstalled drivers for the sound card, which is a pci6. Does anyone have any idea what can be turning off my sound? If I reboot then my sound will work for a very short time.
I click on sound icon in systray and move the sound bar up to bring on the sound and suddenly I can watch the bar go back down to no sound level and then must reboot 4 sound again.
I removed hidserv and was able to turn my sound back on again. I am not sure if hidserv actually is the problem and also I believe it may be part of my spyware (spybot). I had spybot for a very long time and never had sound troubles b4. If hidserv can be the problem then what can I do to resolve this issue. Does anyone have any ideas or suggestions? Thankyou for your response.

@Shameez:
Actually I solved this issue a while ago, and forgot I'd even posted the question on here as no-one responded till now.
Try this- I think this is what I did:
Go to Macintosh HD > Library > Preferences > Audio
You will see two files:
com.apple.audio.DeviceSettings.plist
com.apple.audio.SystemSettings.plist
Move them to the trash. Now open Sound Preferences and move it to the volume you want. Close Preferences, and Restart your computer. The files will be re-created and the bug will be no more.

CAN I INCREASE THE SOUND LEVEL

IS THERE A WAY TO INCREASE THE SOUND LEVEL THAT THE SPEAKERS PRODUCE, AT THE 100% POINT ITS NOT VERY LOUD. I OWN THE HP DV6 LAPTOP WITH WINDOWS 7

Hi,
One thing can help is the following. Right click the speaker icon in the Taskbar and select 'Playback Devices'. Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it, :(

since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it can anyone help?
Em

Return the iPhone and get your money back. It has been
hacked/modified/jailbroken and likely cannot be made
operative.

Push Notifications. The Message "Connect to iTunes to Use Push Notifications "BBC History Magazine" notifications may include alerts, sounds and icon badges" keeps coming up in Newstand, also happens with National Geographic Magazine. HELP!

The Message "Connect to iTunes to Use Push Notifications "BBC History Magazine" notifications may include alerts, sounds and icon badges" keeps coming up in Newstand, also happens with National Geographic Magazine. HELP!
I have now followed multiple instructions from this and other forums. have turned push notifications off. Turned them on. Have updated to IOS 6. Have signed out and signed back in, have uninstalled all magazines and reinstalled. Have synced, and updated everything in iTunes.
Nothing works,. Also cannot use youtube.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
It might also be a good idea to contact Square for assistance.

HT5517 How can I adjust sound level when streaming radio from my Apple TV through Airplay speakers?

I have a 2nd Gen Apple TV with an airport express set up as airplay speakers. I can stream the new radio through using the Airplay speakers pretty well. The problem is that once I've got it going, I cannot adjust the sound level without laboriously backing out of the radio menu, going back to the top level menu then drilling down into the Airplay settings to raise or lower the speaker's sound level.
Is there an easier way to do this?

go to system preferences > Sound > Output. then change the output from "built-in" to HDMI.
Maher

How do I get a descent sound level and quality when exporting out of Logic ??

Hi guys,
I know this topic's been discussed many times before but I still can't fix my problem
I'm going crazy right now. It's been weeks I've been working on beats on Logic and I think they now sound pretty cool.
So I'm trying to export them out of Logic on mp3,or wav, or aiff but everytime it comes out very low. So when I'm applying different tips (limiter, adaptative limiter and different things I found on the internet... ) the sound level is a bit higher but still the quality is not as good as it is on Logic
So here's my questions : first, is it possible to get the exact same quality as the one you have when listening into logic ?
then how to get the best quality with a normal sound level so when you listening to the mp3 or wave or aiff on itunes just after a normal song you don't have to turn the sound up
Thank you very much for you help !!
Ben

And in addition to what octopi wrote ……
Related Articles:
Mixdown for Mastering - written by Holger Lagerfeldt
http://www.onlinemastering.dk/mastering-faq.html
Loudness when Producing and Mixing - written by Holger Lagerfeldt
http://www.gearslutz.com/board/music-computers/468170-loudness-when-producingmix ing-
tips.html
Overload in Signal Conversion - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2003_overload.pdf
0 dBFS+ Levels in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2000_0dbfs_le.pdf
Level Control in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_1999_level_co.pdf
Cheers

We have a new iPod Classic and would like some help in choosing "Import Settings" (under Peferences) when loading the iPod from the Mac. We want to be sure that we can maintain a constant sound level. Used with Bose sound dock. OS 10.6.8 iTunes 10.6.1.

Using an iPod Classic on a Bose sound dock....when loading the iPod from the Mac, what "Import Settings" (under iTune "Preferences"), should be used to maintain a constant sound level when playing music? Mac OS 10.6.8, iTunes 10.6.1.
There are many Import Settings available and it is somewhat confusing. Any suggestions?

Go to iTunes>Preferences>Playback. Tick "Sound Check."
iTunes: About Sound Check

How do I change the startup sound level on my desktop??

How do I change the startup sound level on my desktop?

use StartNinja ! worked for me.
it works under Mountain Lion and is even retina-ready:
http://www.allvu.com/index.php/sndownloadpage.html

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other output options.I've yet to find that area on this pc in the month I,ve had it even though their identical computers.I,m at a loss for the cause of the problem.Headphones work fine but are annoying.

i use professional studio monitors to monitor the audio
the issue , is if i turn up the audio it will clip on premieres main output. so i cant turn it up any more.
the specific moment i took the screenshot the audio volume was at -18db, but even if it was up at 0db it would not even reach half volume on my computers main output
this is the case regardless of the nature of the audio, be it stock music, dialogue, or sound effects maybe there is a hidden master output that im unaware of

Normalising Sound Levels in iMovie

Hello,
I have an iMovie project which is a video/audio interview between two people. Unfortunately the interviewer's mic is far quieter than the interviewee's. Is there a way that I can normalise the sound levels within iMovie so that the volume is consistent?
Thanks!
Tom Ewer

The only way to do that is, if you have iMovie 11, view the audio levels under the video clips and manually change it each time the people switch talking.

Nokia N95 8G Bluetooth sound levels

I am hoping someone out there can help me with a small problem with my bluetooth headset and phone.
I have a Jabra BT250 headset which i used to have paired with my old N73 and the sound levels on it were very good but now having it paired with my N95 8G the sound levels are not great. I have turned up the volume on the phone and headset to maximum but it still does not produce good enough sound.
I used to have to turn down the volume using my old N73 but now i am wondering how i can turn it up.

Hi,
I have the same problem - bought a bluetooth headset so I can use the GPS function on my motorbike but as soon as you activate the GPS the headset is disconnected.
I've managed one work-around so far - I've told the GPS software to use my external bluetooth GPS receiver and not the internal one. Now the headset works.
It's not what I'd call satisfactory but it works. Would love to use the internal gps receiver tho.
Any suggestions?

Sound level icon frozen

Similar Messages

Maybe you are looking for