Sound levels not consistent

On my iphone 4S (and on my older 3Gs), i've noticed that sound effect levels (email alerts, SMS alerts, screen locking) are not consistent. Sometimes they are louder than other times, and sometimes they're not happening at all. I've got the volume up all the way too.
anyone else?

Turn on Sound Check.
Run iVolume.
That's all there is to it.
*Can anyone tell me if I can run iVolume even though iTunes does not seem to adjust the volume using sound check.*
iVolume is an application itself. It integrates with iTunes a bit it does not alter iTunes at all. It simply analyzes the sound file and stores the info in the sound file.
Run iVolume on some songs, then turn Sound Check On and Off.
If they sound different, it works.
Not all songs will change a lot.

Similar Messages

  • IPad 2 sound is not consistent

    My ipad 2 sound goes is stages from sounding like crap to sounding normal and then no sound and back again.  The whole process can take a couple of weeks to no sound for a week.  Tried a power down and it brought the sound back but the sound is bad.  Any ideas?

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Sound levels not the same problem

    Hi there
    I have added music with the Sound Enhancer set to high and some of my music has been added with the Sound Enhancer set in the middle. So what I want to know is how to make all my music the same loudness. When I ride my bike its a mission to ajust the volume every other song.
    Many thanks
    Slippy

    There two places that need changing for this.
    1. Your ipod - scroll through the settings and there should be one for 'sound check' which is defaulted to off, by turning this on it will replay everything at one volume.
    2. In itunes - edit/preferences on the play back tab again click sound check and this will ensure your PC plays at volume too.

  • Sound check (volume leveling) not working newest ipod

    Dear Apple community,
    Thank you for your help with this problem.
    I am extremely disappointed with my new iPod. I have been using iPods for 15 years. Many years ago I solved the problem with volume leveling by using a fantastic program called iVolume. I have over 25,000 songs (collected over 20 years) in my music library and I have never had a problem with the different sound levels when I play them back through my various Ipods and Iphones over the years.
    Unfortunately when I recently purchased the latest generation of iPod I quickly found out that volume leveling no longer works.   The discrepancy in the sound playback is most apparent when I use the bluetooth connection but is also present even when I play through the audio jack.  I have tried turning sound check on and off, and have done a complete reboot of my ipod, and have not seen any difference.
    Any help with this problem would be most appreciated. 
    Sincerely,
    David Rojer
    Maplewood, NJ
    ===
    Specs:
    I am using a Mac with OS X version 10.9.4.
    My Itunes is version 12.0.1.26.
    My iVolume is version 3.7.4.
    My Ipod is model PD478LL with version 1.0.3 Mac.
    ===

    Nevermind I worked it out. Just had to restart iTunes. Classic IT Crowd: "Have you tried turning off and on again?". Lol.

  • Recording meters do not match sound level

    I recorded my strumming guitar on track 1 (LPX) and the meters were pegging into the yellow, but the graph of the audio signal in the track region showed a very small line.  The sound was not as loud as it should have been when played back either.
    With the same channel settings (as nearly as I can tell), I recorded a vocal on track two and the audio graph looked like it should have with the meters pegging into the yellow and of course, this track (channel) is quite a bit louder than teach (channel) 1.
    this seems like one of those "simple things" so thank you for your patience,
    Mark
    MacMini 10.3 GHz i7  8GB, SSD drive (LaCie),  Behringer Mixer into the audio inputs of the mini.  OS X 10.9.5

    Waveform Zoom is found highlighted in Green in the screenshot below .
    You can use Auto Vertical Zoom highlighted in Red or just the vertical/horizontal zoom sliders themselves to manually control zoom levels highlighted in Yellow... to tweak things more...

  • Alsamixer does not remember sound levels

    Good afternoon,
    I have a recurring problem concerning alsamixer. Everytime my machine starts up, the ALSA sound levels are adjusted back to the level they had before, even if I changed them while running. As the Front Microphone Booster is running on 100%, I get a weird distorted sound when having my speakers turned on while booting - it starts to appear when I have successfully looged into KDEmod.
    ALSA is amongst the daemons array in the rc.conf, and I have tried to change the levels and used alsactl store as root. It did not work out as well.
    Has anyone an idea, how I get my ALSA to store the levels, towards avoiding the painful distortion on every reboot?
    Regards,
    cg

    I had similar behaviour what you describe start a few weeks ago. I have turned off system sound via the contol_Centre->Sound&Multimedia->System_Notifications->player_settings->no_audio_output. However after the most recent pacman -Syu yesterday I have noticed that under Kmixer if I now have "four channel mode" an mic switch on I no longer get the demented screeming that also seemed to be a symtom of what you described above, when I increased my volume past half way. I also  now have alsa daemon dissabled in rc.conf, other sound e.g skype works fine. There was a kernel update as  part of my system upgrade yesterday and I was wondering if this may have helped things, have you updated recently.
    also note the kdemod updates as of yesterday
    2007-12-22 09:43] upgraded kdemod-kdebase (3.5.8-4 -> 3.5.8-5)
    [2007-12-22 09:44] upgraded kdemod-kdemultimedia-base (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdemultimedia-juk (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdemultimedia-kaudiocreator (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdemultimedia-kmid (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdemultimedia-krec (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdemultimedia-kscd (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdemultimedia-noatun (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44]
    [2007-12-22 09:44]
    [2007-12-22 09:44] WARNING KDEutils
    [2007-12-22 09:44] ----------------
    [2007-12-22 09:44]
    [2007-12-22 09:44] KDElirc, KJots and KSim are now separate packages (!)
    [2007-12-22 09:44] Dont Panic ;) Just install them:
    [2007-12-22 09:44]
    [2007-12-22 09:44] pacman -S kdemod-kdeutils-kdelirc
    [2007-12-22 09:44] pacman -S kdemod-kdeutils-kjots
    [2007-12-22 09:44] pacman -S kdemod-kdeutils-ksim
    [2007-12-22 09:44]
    [2007-12-22 09:44]
    [2007-12-22 09:44] upgraded kdemod-kdeutils-base (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-ark (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-charselectapplet (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-kcalc (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-kcharselect (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-kdf (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-kedit (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-kfloppy (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-kgpg (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-khexedit (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-klaptopdaemon (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-kregexpeditor (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-ktimer (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-kdeutils-superkaramba (3.5.8-2 -> 3.5.8-3)
    [2007-12-22 09:44] upgraded kdemod-tools (3.5.8-1 -> 3.5.8-2)
    Last edited by sykesm (2007-12-23 14:44:03)

  • Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

    Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
    There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
    What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

    If that's the best you can do why don't you get on another forum?

  • Burning Sound Level

    Is there any option to show the "burn" volume level, of a complete playlist, before it is burned to disc?
    The purpose of the exercise is to take recordings from old CDs and make a mix CD. The mix CD playlist has been carefully adjusted to make an improvement to the relative sound level between tracks, but it will not burn a consistent sound-level CD.
    Sound Check is not working well enough, and manual adjustment to the volume adjustment of each track is not sufficient.
    Are there any other factors that could be adjusted in iTunes, or is there other software that will do this accurately?
    Thanks,
    Buster
      Windows XP Pro   Dell

    It sounds like you're looking for a "CD Mastering" service. I don't have any recommendations, but you could try googling "CD Mastering Services" and see what comes up.
    One warning: By "original" music--I assume you mean you own the copyrights. If you are working with tracks from "original" CDs created by others--you may run into some copyright issues.
    You might want to consider one of these "Audio Production Software" titles:
    http://www.download.com/Audio-Production/3150-2170_4-0.html
    Unfortunately, I don't have any recommendations, although CNET does have user forums and allows users to write reviews so you might find helpful advice on the site from other users.

  • My sound does not work on my computer

    Hey
    I don't know if anyone can help me but my sound is not working on my computer. I went to my system preferences and when I click on output it says that the device has no output controls. I don't know why it is doing this. Can anyone help me to solve this problem?

    See:
    * https://support.mozilla.org/kb/No+sound+in+Firefox
    * https://support.mozilla.org/kb/Video+or+audio+does+not+play
    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
    You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.

  • Airport Extreme Not Consistently Assigning DHCP

    I am using a relatively new (within the last year) Airport Extreme as the primary router on my home network.  Connected directly to the router is a GigE switch, an AT&T Microcell, and another router - an Aruba RAP which creates a secure VPN for my home/remote office network.  The connection to my Apple desktop is made through the GigE switch, as are three additional wired connections to other devices in my home, including two Apple TV's and (hopefully) two Airport Expresses.  
    I recently discovered when trying to configure a new Airport Express to extend my wireless network over ethernet (roaiming network) that my Airport extreme is not consistently assigning the IP addresses within it's defined DHCP range (10.0.1.0 - 10.0.1.200).  About half of the time devices on the network are getting a default 169.254.x.x IP address, which (in the case of my desktop) results in an 'self assigned IP' error within the network settings.  I can reboot my apple desktop and the next time it gets a correct 10.0.1.1 address.  Reboot again, it defaults back to a 169 address - and so on. It doesnt seem to make any difference if I connect my desktop directly to the Extreme, or, if I connect it through the GigE switch.  And, every time I get a 'self assigned IP' I have no connectivity beyond the Extreme (no internet), and I'm forced to use my wireless/Airport connection.
    Another problem here is that the Expresses both expect to receive 10.x IP addresses and when they don't get one, they basically become pretty $100 paperweights when connected over ethernet. Also, if you try to configure a new Express without the 10.x address it expects to be assigned (and defaults to a 169.x), the Airport Utility will no longer 'find' the Express once the Express auto-restarts and the update will fail.  I learned this after spending two hours on the phone with Apple support yesterday - during which they were able to get my first generation Express configured, but, not my 24-hour old second Generation Express, which continues to act only as a paperweight.  Oddly enough, everything works perfectly well if I use only wireless connections to the Extreme - there are no IP problems and everything works correctly.  Unfortunately, I want to use wired connections for all my devices (expresses, Apple TV's) because we stream alot of audio and video.     
    Is my Extreme not working correctly?  Does anyone think it's problematic to have a second router (the Aruba) connected behind the Extreme?  I suppose I could force some components to use only specific IP's, but, that sounds like a pain.  If the Aruba is problematic, I would also consider a second internet connection, or, finding some way to split home IP traffic vs work IP traffic. 
    Thoughts?

    I've been doing some research and it appears the 'self assigned IP' address is a common problem in the Apple support community.  And, for what it's worth, it appears an inability to isolate or accurately troubleshoot the problem - by users or Apple tech support - is a recurring theme.  I totally understand that no two home networks are exactly alike (different ISPs, switches, configurations, etc.), but, after being a die-hard PC user for my entire life I can honestly say I never encountered anything like this while using my PC.  I'm not about to trash my Mac, but, the Apple 'ease of use' selling point is quickly losing it's lustre.
    I got into this mess because I added a GigE switch to my network.  Rather than buy a different switch (a tactic which assumes my problems are being caused by the switch) I'm inclined to buy another Airport Extreme and try daisy-chaining them together to overcome the reason I bought the GigE switch in the first place, which is not enough ethernet ports on the Extreme.  That, or I'll spend a weekend in my attic re-wiring my home network to daisy-chain my two Express devices together instead of requiring individual connections to my router.  My experience with Apple hardware thus far is that it prefers to 'play nice' with other Apple hardware over non-Apple hardware.  It could be $100 error on my end (or, a weekend of not doing yardwork), but, I think it's the best shot.  Other possible fixes, including manually assigned IP-addresses, put too much emphasis on software and network configuration - which (by my non-scentific analysis), are two areas even harder to troubleshoot. 
    I'll let you know how it goes. 
    Mh
    Post Script - Dear Apple: please find a way to significantly increase the number of ethernet ports on your Airport Extreme Router.  Thank you. 

  • How do I get a descent sound level and quality when exporting out of Logic ??

    Hi guys,
    I know this topic's been discussed many times before but I still can't fix my problem
    I'm going crazy right now. It's been weeks I've been working on beats on Logic and I think they now sound pretty cool.
    So I'm trying to export them out of Logic on mp3,or wav, or aiff but everytime it comes out very low. So when I'm applying different tips (limiter, adaptative limiter and different things I found on the internet... ) the sound level is a bit higher but still the quality is not as good as it is on Logic
    So here's my questions : first, is it possible to get the exact same quality as the one you have when listening into logic ?
    then how to get the best quality with a normal sound level  so when you listening to the mp3 or wave or aiff on itunes just after a normal song you don't have to turn the sound up
    Thank you very much for you help !!
    Ben

    And in addition to what octopi wrote ……
    Related Articles:
    Mixdown for Mastering - written by Holger Lagerfeldt
    http://www.onlinemastering.dk/mastering-faq.html
    Loudness when Producing and Mixing - written by Holger Lagerfeldt
    http://www.gearslutz.com/board/music-computers/468170-loudness-when-producingmix ing-
    tips.html
    Overload in Signal Conversion - written by Søren H. Nielsen and Thomas Lund
    http://www.tcelectronic.com/media/nielsen_lund_2003_overload.pdf
    0 dBFS+ Levels in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
    http://www.tcelectronic.com/media/nielsen_lund_2000_0dbfs_le.pdf
    Level Control in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
    http://www.tcelectronic.com/media/nielsen_lund_1999_level_co.pdf
    Cheers

  • Business partner of organizational unit is not consistent

    Hi,
    Client is on SRM 4.0. When we are trying to search a user in the org structure, and when clicking on "Check" for this user, it was showing fine. But when we are searching any BP in the org strucutre, then immediately the BP name is vanishing against the BP of the user and when doing the "Check" it is showing the below two messages:
    Business Partner of organizational unit XXXXXXX is not consistent
    User cannot be repaired becasue the organizational unit contains errors
    When checking in BBP_CHECK_USRES, the user is not showing as defective. It is green.
    Similarly, the the organizational unit check is also showing as green.
    System is advising to run BBP_BP_OM_INTEGRATE. When we run this for the org units, these are coming as green.
    Users are able to create the shopping carts and also are able to create confirmations. But the problem is happening for some of the users where the system is not allowing to create shopping basket / confirmation.
    Strange thing is that, when we are searching the user by user id in the org structure, then the check is showing no messages. But if we search the same user using the BP number, then in the check, the messages are coming. And once the messages appear, it is appearing for all the users in the org strucutre even at the root node level.
    Any help is highly appreciated.
    Thanks & Regards,
    Aswini

    Hi Aswini,
    There are some possibilities to raise these kind of errors messages:                                                                               
    1) User with inconsistent data.                                           
    Please, check the instructions described in the following notes:          
    597475 - Repair users with inconsistent address data                      
    -> use the report B_REPAIR_EBP_USER_2 to make the user consistent.        
    419423 - Repairing incorrect EBP users                                    
    350129 - Creating business partner for organizational unit                                                                               
    When you create the Org Units have you fully completed the address        
    data, e.g post coe, telephone/fax number etc..                            
    If not, please enter a full address, save the data and see if this        
    generates the Business Partner.                                           
    Remember, that you can delete this user and create a new user.                                                                               
    2) Error in the positions after HR replication                                                                               
    Please, implement the following notes and retest the scenario:            
    1056873 -  Incorrect SRM users after HR distribution                      
    1016450 - Replication of persons deletes positions in SRM                                                                               
    After implementing these notes you should send the employee               
    corresponsing to the user in error with his position (using               
    transaction PFAL or report RHALEINI in UPDATE mode for all periods.                                                                               
    3) the user was deleted and a new was created and during these two        
    actions the user opened documents. So, in this case, the new user         
    becomes inconsistent                                                                               
    If the user is deleted from SU01 still the BP and S which is related to   
    that user will be retained (we can see this in PPOMA_BBP) transaction.    
    In this case we can create the user again using SU01 and can be attached  
    with the old 'S' and 'BP'.                                                                               
    2. If the user is completed deleted ie., all relations BP and S.          
    The new user has created.   
    In this case if the new user is corrupted we can delete this                  
    user (since the new user doesn't create any documents so far). But the        
    old documents should refer to the new BP related to the new user.   
    ========================
    Also, another option would be to follow the below instructions
    After applying the notes 1056873 & 1016450, send the employees        
    corresponding to the users in errors with their positions (using              
    transaction PFAL or report RHALEINI in UPDATE mode for all periods,           
    using evaluation path A008) ? If not, please do this and it must repair       
    the SRM users. Please test and give me the feedback.     
    Hope this helps,
    Kind Regards,
    Matthew

  • Metadata of Controller EMPTYVIEW Is Not Consistent.

    Hi,
    After upgrading NW04s from SP07 to SP11, one of my web dynpro for ABAP application gives the following error on execution.
    I am also getting a system dump. I have checked all the necessary services in SICF & most of the required services are active. Does any one have some idea of how I can resolve this error.
    Error when processing your request
    What has happened?
    The URL http://ustca644.kcc.com:8086/sap/bc/webdynpro/sap/zvmkc_tsvm_main/ was not called due to an error.
    Note
      The following error text was processed in the system PGW : Metadata of Controller >EMPTYVIEW< Is Not
    Consistent. "View Controller" Does Not Contain a "View"
      The error occurred on the application server ustca644_PGW_20 and in the work process 0 .
      The termination type was: RABAX_STATE
      The ABAP call stack was:
    Method: CONTROLLER_KIND_TO_TEXT of program CL_WDY_RG_META_SERVICE========CP
    Method: CONSTRUCTOR of program CL_WDY_RG_CONTROLLER==========CP
    Method: GET_CONTROLLER_PARTS of program SAPLWDR_RUNTIME_REPOSITORY
    Method: SAVE_COMPONENT of program SAPLWDR_RUNTIME_REPOSITORY
    Method: SAVE of program SAPLWDR_RUNTIME_REPOSITORY
    Function: WDR_SAVE_REPOSITORY of program SAPLWDR_RUNTIME_REPOSITORY
    Method: SAVE of program CL_WDR_RR_DB==================CP
    Function: WDY_WB_GENERATE_INTERNAL of program SAPLWDY_WB_ACTIVATION_SERVICES
    Function: WDY_WB_GENERATE of program SAPLWDY_WB_ACTIVATION_SERVICES
    Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
    What can I do?
      If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system
    PGW in transaction ST22.
      If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on
    the application server ustca644_PGW_20 in transaction SM21.
      If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work
    process 0 in transaction ST11 on the application server ustca644_PGW_20 . In some situations, you may also need to analyze
    the trace files of other work processes.
      If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 400 -u: C14216 -l: E -s: PGW -i: ustca644_PGW_20 -w: 0 -d: 20070222 -t: 222514 -v: RABAX_STATE -e:
    UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    System Dump
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_WDY_RG_MD
    Date and Time          02/22/2007 22:25:14
    Short text
    An exception occurred that was not caught.
    What happened?
    The exception 'CX_WDY_RG_MD' was raised, but it was not caught anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_WDY_RG_META_SERVICE========CP' has to be
    terminated.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDY_RG_MD', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Metadata of Controller >EMPTYVIEW< Is Not Consistent. "View Controller" Does
    Not Contain a "View"
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_WDY_RG_MD"
    "CL_WDY_RG_META_SERVICE========CP" or "CL_WDY_RG_META_SERVICE========CM001"
    "CONTROLLER_KIND_TO_TEXT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "ustca644"
    Network address...... "165.28.85.39"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "PGWA"
    Database type..... "DB2"
    Database name..... "PGW"
    Database user ID.. "SAPR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Oct 30 2006 00:08:55"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "DB2CLI.DLL 08.02.0003 "
    Patch level. 83
    Patch text.. " "
    Database............. "DB2 for OS/390 7.1, DB2 for OS/390 8.1, DB2 for OS/390
    9.1"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 16192
    EM...... 16759360
    Heap.... 0
    Page.... 0
    MM Used. 12837904
    MM Free. 3918160
    User and Transaction
    Client.............. 400
    User................ "C14216"
    Language Key........ "E"
    Transaction......... " "
    Program............. "CL_WDY_RG_META_SERVICE========CP"
    Screen.............. "SAPMHTTP 0010"
    Screen Line......... 2
    Information on Caller ofr "HTTP" Connection:
    Plug-in Type.......... "HTTP"
    Caller IP............. "165.28.239.30"
    Caller Port........... 8086
    Universal Resource Id. "/sap/bc/webdynpro/sap/zvmkc_tsvm_main/"
    Information on where terminated
    Termination occurred in the ABAP program "CL_WDY_RG_META_SERVICE========CP" -
    in "CONTROLLER_KIND_TO_TEXT".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 20
    of the (Include) program "CL_WDY_RG_META_SERVICE========CM001".
    Source Code Extract
    Line
    SourceCde
    1
    method CONTROLLER_KIND_TO_TEXT .
    2
    3
    data:
    4
    cref_View type ref to cl_wdy_md_view,
    5
    ctlr_Type type Wdy_Md_Controller_Type.
    6
    7
    ctlr_Type = controller->get_type( ).
    8
    9
    case ctlr_Type.
    10
    11
    when wdyn_ctlr_type_custom.
    12
    controller_type_as_text = 'CUSTOM'.
    13
    14
    when wdyn_ctlr_type_view.
    15
    controller_type_as_text = 'VIEW'.
    16
    if ( ABAP_FALSE eq Controller->Has_View( ) ).
    17
    " view controller must have a view
    18
    gi_Cx_Text =  Controller->Get_Name( ).
    19
    gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
    >>>>>
    raise exception type Cx_Wdy_Rg_Md
    21
    exporting
    22
    TextId =     Cx_Wdy_Rg_Md=>Controller_Data
    23
    Controller = gi_Cx_Text
    24
    Reason =     gi_Cx_Hint.
    25
    26
    else.
    27
    gi_Cx_Text =  Controller->Get_Name( ).
    28
    if ( gi_Cx_Text eq 'EMPTYVIEW' ).
    29
    return.
    30
    endif.
    31
    32
    " sanity check against illegal CL_WDY_MD_EMPTY_VIEW
    33
    try.
    34
    cref_View ?= Controller->Get_View( ).
    35
    if ( cref_View is initial ).
    36
    gi_Cx_Text =  Controller->Get_Name( ).
    37
    gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
    38
    raise exception type CX_Wdy_Rg_Md
    39
    exporting
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    1
    SY-TABIX
    2
    SY-DBCNT
    0
    SY-FDPOS
    7
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    HTTP Control
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20070222
    SY-UZEIT
    222514
    SY-XPROG
    SY-XFORM
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    22 METHOD       CL_WDY_RG_META_SERVICE========CP    CL_WDY_RG_META_SERVICE========CM001    20
    CL_WDY_RG_META_SERVICE=>CONTROLLER_KIND_TO_TEXT
    21 METHOD       CL_WDY_RG_CONTROLLER==========CP    CL_WDY_RG_CONTROLLER==========CM001    25
    CL_WDY_RG_CONTROLLER=>CONSTRUCTOR
    20 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11            684
    LCL_SAVE_REPOSITORY=>GET_CONTROLLER_PARTS
    19 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             91
    LCL_SAVE_REPOSITORY=>SAVE_COMPONENT
    18 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             29
    LCL_SAVE_REPOSITORY=>SAVE
    17 FUNCTION     SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYU02             27
    WDR_SAVE_REPOSITORY
    16 METHOD       CL_WDR_RR_DB==================CP    CL_WDR_RR_DB==================CM002     3
    CL_WDR_RR_DB=>SAVE
    15 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU04        279
    WDY_WB_GENERATE_INTERNAL
    14 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU01         84
    WDY_WB_GENERATE
    13 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF12             77
    LCL_REPOSITORY=>CONSTRUCTOR
    12 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01             17
    LCL_COMPONENT=>CONSTRUCTOR
    11 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            669
    LCL_COMPONENT=>IF_WDR_RR_COMPONENT~GET_USED_COMPONENT
    10 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            245
    LCL_COMPONENT=>IF_WDR_RR_COMPONENT~CREATE_COMPONENT_USAGE
    9 METHOD       CL_WDR_MESSAGE_WINDOW=========CP    CL_WDR_MESSAGE_WINDOW=========CM001    30
    CL_WDR_MESSAGE_WINDOW=>CONSTRUCTOR
    8 METHOD       CL_WDR_APPLICATION_WINDOW=====CP    CL_WDR_APPLICATION_WINDOW=====CM00K     6
    CL_WDR_APPLICATION_WINDOW=>INITIALIZE
    7 METHOD       CL_WDR_CLIENT_COMPONENT=======CP    CL_WDR_CLIENT_COMPONENT=======CM004    59
    CL_WDR_CLIENT_COMPONENT=>DISPLAY_TOPLEVEL_COMPONENT
    6 METHOD       CL_WDR_CLIENT_APPLICATION=====CP    CL_WDR_CLIENT_APPLICATION=====CM00L    30
    CL_WDR_CLIENT_APPLICATION=>INIT
    5 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00I    40
    CL_WDR_MAIN_TASK=>EXECUTE
    4 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00J    69
    CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
    3 METHOD       CL_HTTP_SERVER================CP    CL_HTTP_SERVER================CM00I   524
    CL_HTTP_SERVER=>EXECUTE_REQUEST
    2 FUNCTION     SAPLHTTP_RUNTIME                    LHTTP_RUNTIMEU02                      929
    HTTP_DISPATCH_REQUEST
    1 MODULE (PBO) SAPMHTTP                            SAPMHTTP                               13
    %_HTTP_START

    Hi Kim,
    Please try the following:
    Try to reactivate the component
    If this does not help, please create an OSS ticket and the SAP colleagues will help you to fix the problem. Please add exact information about the component and open a connection to your system.
    Ciao, Regina

  • My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

    the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other output options.I've yet to find that area on this pc in the month I,ve had it even though their identical computers.I,m at a loss for the cause of the problem.Headphones work fine but are annoying.

    i use professional studio monitors to monitor the audio
    the issue , is if i turn up the audio it will clip on premieres main output.  so i cant turn it up any more.
    the specific moment i took the screenshot the audio volume was at -18db, but even if it was up at 0db it would not even reach half volume on my computers main output
    this is the case regardless of the nature of the audio, be it stock music, dialogue, or sound effects  maybe there is a hidden master output that im unaware of

  • Sound Level adjustment causes sound bumps in video

    Hi, When I adjust the sound level on an MP3 track two sound bumps/thuds/heart beats are magically inserted into the center of the main video's audio. They do not show up at the point of the adjustment handles, nor at the transitions. In fact, when zoomed in a lot, they seem to be on each side of the video icon for the particular video segment. They come in pairs and are about a second apart. This isn't the sound glitches at the transitions about which many write. Anyone else experience this?
    Thanks, Jim

    I've tried that slider on iDVD with no effect. Not sure what it is for, in fact. Maybe someone else can help. David Pogue's Missing Manual book on iMovie and iDVD doesn't mention that control.
    But I do know that to adjust the sound within the project, you need to be in iMovie. There are several editing tools to add sounds, adjust levels, etc. I have in fact found this to be the most time consuming part - not technically, but to produce a project where the sounds are not too loud or too soft, insert the appropriate background music, edit out peaks, etc. Techincally easy to do each piece but a lot of work to really get the audio to match and enhance the project.

Maybe you are looking for

  • T400 display issues using XP Pro 32 bit

    I recently was given this notebook which was running server 2008. I reformated the drive using XP Pro, for the time being. It will be uograded to Windows 7 once the hard drive is upgraded and more memory is added. The problem is I want to use the ATI

  • The Service Component Container is not running" eventhough they are running

    Hi, We are on 12.0.4 with hardware load balancer(cisco), and pcp has been configured between two Application nodes. The database is in the seperate node with OS Cluster. I wanted to configure Workflow notification mailer. For that i have logedin thro

  • Help with Black Screen?

    My iPhone 4 froze and went completely black. The phone will still ring but the screen remains black. I tried plugging it in to the USB and turning it on, but there was no luck!

  • Can't reinstall photoshop elements 7

    Hello, I've changed muy operative sistem from windows 7 home to profesional, and photoshop told me that I have to removeca the old one, and reinstall it again, I did and now he tell me that the serial number is wrong, I check it an is correct. Can an

  • Calendar back up - script error issue

    hi, 1st of all let me tell you i am not a programmer. i dont have any kind a knowledge of apple script or automater. but when i was serchign backup sollution via apple script, i got this script.           tell application "Safari" to activate