Sound looping question

hello everyone!
i'm pretty new to using flash (i only need to use it for a uni sound design project) and i'm having some problems.
what i'd like to do is create a button, and loop sounds in the "up" state of that button. the only problem is, that if i import the sound to the "up" keyframe and choose loop in the properties it keeps looping until the end of time. what i'd like though is it looping just in the event of the mouse being in the buttons' area. what should i do?

1) create button
2) doubleclick on the button (edit)
3) create extra layer for sounds
4) in this layer, create empty keyframes for all states (UP, OVER, DOWN, HIT);
5) add the sound to the OVER keyframe in sounds layer, set it to SYNC: Start, Loop
6) add the sound to the UP keyframe in sounds layer, set it to SYNC: Stop, Loop

Similar Messages

How do I create a sound loop with Garageband?

Probably a simple question, but I'm very new to Garageband. I'm trying to make some sound loops to use as looping background music for a Flash website. How do I import an mp3 from my iTunes and the cut it down to a 10 second or so snippet, then have it loop for the background music? I'm guessing I want to export it as an mp3, correct?
Any help is greatly appreciated!

Hi
An Audio region is the name of a rectangle in GB that represents the audio file.
It's like a Bar that contains the data. The data can be audio or MIDI. So, drag the top right means place the mouse cursor over the top right corner of the bar and click-hold and drag... like you would drag a window or a picture to resize it in other applications.
At the end of the Time Ruler is an arrow pointing left you can drag. This sets the end of the project. So drag it to where you want it to end (exactly where the region ends)
or click on the two arrows looping (in a circle) button in he Transport bar at the bottom. This creates a cycle region (yellow bar in the Time Ruler). Drag and resize this to include only what you want:
and choose Share > Export Song to Disk.
There is a good offer on you might be interested to learn more about the basics and some of GB and other applications:
https://www.macprovideo.com/trial/?st=7df&login
This gives you FREE online access for 7 days to all the tutorials at macprovideo. I think you need to register and cancel before the 7 days is up if you don't want to continue the subscription. The tutorials for GB and other programs are very high quality so I didn't take the online sub offer but I buy and download the ones I want.
JG
Message was edited by: JG99

Lock ups and sound looping!

I remember reading something here about people having trouble with their systems locking up and then getting a loud static noise then a sound loop when playing games.
I am getting this about 2-3 times a night now and it is driving me nuts, I do not have temp problems of any sort and I have all of the latest drivers for everything on my system.
Any ideas?
Specs in sig

Set your PCI/AGP Freq to 66.66/33.33MHz.
Increase your DDR Voltage to 2.7~2.8v.
Check if you have any background programs causing all high CPU load times while gaming.

Sound "Looping" on 46G300U1

Hi.
I have a 46G300U1 which is connected to an AT&T U-Verse DVR via HDMI. Periodically the sound "loops" or hangs in an infinite loop. this problem is very intermittent and might not happen for days or might happen 5 times in an hour. Only turning the television off eliminates the problem. If I try to change inputs to clear the problem the TV reboots (Toshiba light and power light go off and then come back on).
I've tried 5 different HDMI cables (high speed and 1.3) with no change in results. I've tried a component cable and that resulted in a different issue - periodically the volume goes to maximum.
Does anyone have an idea what's causing this and how to fix it?
Thank you!
Kevin

Does it only happen from that source? Has it ever happened from a different source?
Try disabling REGZA. From the "Setup" menu, select "REGZA-LINK Setup." Change "Enable REGZA-LINK" to "Off."
- Peter

Sound Looping station

Hi Guys,
I relatively new to LabVIEW, but am loving it so far.
I want to create a sound looping program... the difference from others being that the sound is recorded (eg. 4 seconds of recording) then the Sound Output doesnt play for a while (eg. delays the output by 8 seconds - variable by input).
Is there a type of buffer i can store the sound input to...? Or do i have to write to a file, and the open it to be played.
I would not like to do the latter because i need the playback exactly on the time specified (for live music applications).
Thanks!
Dan

I'm sorry for the duplicate posts. I wanted to add the image of the block diagram, but it took me a while to figure out how to do that. The link where I learned it is here:
http://forums.ni.com/ni/board/message?board.id=130&message.id=1655&query.id=122224#M1655
Also, the link to get the block diagram was here:
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=1020&view=by_date_ascending&pag...
Here is the image:
It is a cool feature that really makes reading the threads easier when people can post small snippets of code. But there really must be an easier way to do this!
Message Edited by Ravens Fan on 02-02-2007 12:07 AM
Attachments:
Example_BD.png ‏4 KB

Freeze on blank screen with sound loop when playing steam games

Hi,
I would really appreciate some advice. I've been troubleshooting this problem without success,
Problem:
Playing games on steam*, at some point, sometimes 5 minutes in, sometimes 2 hours in:
- Screen goes blank,
- last sound loops continuously,
- computer completely unresponsive, requires hard shut down
- On restart I get almost the same report every time, though sometimes it referes to CPU 0 and sometimes CPU 2, a sample:
Sat Feb 26 12:16:44 2011
panic(cpu 2 caller 0x9cdbfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xc0000000 0x7f4cd000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x5bdd3888 : 0x21b50c (0x5d4438 0x5bdd38bc 0x223974 0x0)
0x5bdd38d8 : 0x9cdbfa (0xbe32bc 0xc53940 0xbf2424 0x0)
0x5bdd3978 : 0xae8640 (0x93d7004 0x9a47004 0x100 0x2b0a6c)
0x5bdd39c8 : 0xadf639 (0x9a47004 0x100 0x5bdd39f8 0x9bd6d7)
0x5bdd39f8 : 0x16bd9ce (0x9a47004 0x100 0x438004ee 0x2b0a6c)
0x5bdd3b38 : 0xb072bd (0x9a47004 0x877d004 0x0 0x0)
0x5bdd3b78 : 0x9d6e63 (0x9a47004 0x877d004 0x0 0x0)
0x5bdd3c18 : 0x9d346f (0x0 0x9 0x0 0x0)
0x5bdd3dc8 : 0x9d533e (0x0 0x600d600d 0x702a 0x5bdd3df8)
0x5bdd3e98 : 0x969582 (0xc1d00010 0xaa910001 0x20802040 0x5bdd3ee0)
0x5bdd3ef8 : 0xd294eb (0x940e800 0x5bdd3f4c 0x0 0x7)
0x5bdd3f58 : 0xd29696 (0x93c7000 0xd30b54 0x5bdd3f78 0x2a358d)
0x5bdd3f78 : 0x22fd09 (0x93c7000 0x0 0x5bdd3fc8 0x227966)
0x5bdd3fc8 : 0x2a06cc (0x863ea0 0x0 0x10 0x0)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.19)@0xd26000->0xd30fff
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
com.apple.nvidia.nv50hal(6.2.6)@0x1587000->0x199bfff
dependency: com.apple.NVDAResman(6.2.6)@0x967000
com.apple.NVDAResman(6.2.6)@0x967000->0xc54fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
BSD process name corresponding to current thread: kernel_task
* This also happened one time when using photoshop
What I have tried:
- updating steam and OS X
- closing all apps besides steam
- disabling Vsync in the games
- running games in very low quality
- updating to latest flash beta (steam uses flash for in-app advertising)
- reinstall steam and redownload and reinstall games
- verify and repair disk within OS
- SMART check, RAM test, Video memory test with TechTool Pro, all Pass
- removing peripherals ie. Microsoft bluetooth mouse
- hardware test with OS X install DVD on reboot, detects no problems
- stressing the GPU doing intensive 3D effects in Adobe After Effects, no crash
- stressing GPU using CINEBENCH, no crash
- monitoring temp with Temperature Monitor, Last crash GPU was at around 80 and CPU at around 85
System
mid 2010 MBP
15 inch with Hires display
i7, 4 GB RAM, Nvidia GT330M card
OS X 10.6.6
*Other points*
- Machine is still under 1 yr warranty
- I'm overseas studying design and I really cant afford to to take it in and not have a machine for 2 weeks. I'd really like to exhaust all options before taking it in. I'm also worrying that they will run the hardware test as I did and tell me: no problems found.

I'm so ****** off that it's been weeks and no solution has been provided for this. In the middle of video editing, watching quicktime videos, youtube, or playing any games the computer hard freezes with a black screen and looping audio of about 1/2 second.
FIX IT!

Computer crashes and sound loops while playing a game

My problem is similar some others i have seen in this forum and others. I have been struggling with this issues since i made the computer. The problem is while playing counter-strike after around 30 min to 2 hours the screen freezes and the sound loops and then the monitor turns off and the computer restarts. I have made possible attempts to fix the problem starting with buying a thermal take volcana for my cpu and a artic cooler for my video card. I also have my cpu underclocked from a 3200 to a 2500 i found that helps delay the problem a bit(i think anyway). I have 4 fans in my case also. I also thought it might be the onboard sound so i bought a logitec usp headset but that didn't fix the problem so i recently bought a sound blaster live 5.1 ls. I have also switch powersupplys though both were around 350-400 watts.
Any help or feedback it greatly appreciated.
my specs are:
MSI 9800 pro
K7N2 Delta-L
Athlon 3200+(underclocked to 2500)
Soundblaster Live 5.1 ls
1 stick of 512 mb Ultra
350 watts not sure of the company came with the X-Dreamer II case
hp cd-burner
Thanks for taking your time to read this any help/suggestions would be great

What are the max amps on 3 rails of your PSU what slot is your sound card in? Can you list your IRQ's? Run Memtest
cheers

MSI 7870 TF 2GD5/OC black screen with sound loop

hello,
Im getting the black screen with sound loop during the gaming. i have to shut down pc.
in win log is no info about problem, just that the win was not shuted down correctly..
no matter whats type of game, sometimes after 15 minutest sometimes after 4 hours.
no matter on card temperature.
tried reinstall windows, tested on all driver versions for 7870 from amd, but still same...
found an article about this
http://w w w .behardware.com/news/12705/black-screens-and-radeon-hd7870-a-solution.html
now the card is in RMA

Then ask MSI: >>How to contact MSI.<<
This is a Users-to-Users Forum

Sound Loop with a button

So I used the tutorial on this page to make a button that
turns sound on and off (it is the only one I could find that
actually works):
[URL="
http://www.entheosweb.com/Flash/flash_sound_button.asp"
But the only problem with it is that the sound does not loop.
I've found scripts that make sound loop, but I can't figure out
where to put it into this code.
PLEASE HELP ME! This was supposed to be done last week, and I
don't like telling the customer that I don't know how to make his
sound loop!
Please tell me how to fit it into this code because I don't
want to make a whole new sound button. Thank you!

The movie that you linked to will only stop the sound that is
playing. Further that sound is set to only loop 7 times, so it will
stop after a little more than a minute in any case.
Have a look at this variation that I built using the existing
content. It's much simpler and actually does what you want:
http://www.ddg-designs.com/downloads/soundControl.zip

SB Audigy 2 sound loop crashing ga

Hi i just recently purchased SB audigy 2zs from a local best buy. AFter uninstalling all my old sound drivers, i popped this baby in. Installed all the drivers, including EAX 4 and all the other goodies that came with the CD. I started to load up a game, and it would play for a little while (under 5 minutes) then have a quick sound loop and boot me to the desktop. I just thought it was some flaw, then i tried to reload the game, and load it up, and same thing happens, i change the Dxdiag sound to normal acceleration and it still has the same problems.
my Computer is using
Windows Xp professional
Service pack 2
Im on a Pentium 4 3.0ghz Northwood 800mhz FSB HT TechnologyIntel 865 PERL(K) motherboard2 52 meg Corsair XMS ddr400 pc3200 ram (platinum heat spreaders)60 Gig 7200 rpm SATA Seagate250 Gig 7200 rpm Maxxtor20 Gig 7200 rpm WD SE28mg ATI RAEDON 9800 PROSoudblaster audigy 2zs 48x2x48 Liteon cdrw6x Pioneer dvdKlipsch 5. promedia250meg external Zip7" Samsung LCD 72xLogitech Mx500 mouseSteelpad 4s MousepadLogitech Elite Keyboard BlackPlantronics Audio 90
I just checked the sound tab on dxdiag and it said this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Is there any way to make it digitally signed?

If you appied the driver updates (or if you didn't, you should! They fix stuff.), sometimes the installer installs the driver files but they don't get registered properly. You can check if this happend by going into Device Manager and clicking the properties/driver tab and seeing what it is labeled. You might have a label of the 402's that used to be signed before you ran the driver update installer but now are no longer! and, if you look at the list of files below that you may find all 444 drivers, most of which do not have the signed icon to their left.
If this happened to you, simply use WinZip or WinRar to extract the downloaded driver update to a folder and locate the CTZAPP.EXE file in the driver folder. Run it, and place a check in the box the tells it to overwrite previously installed driver files and shared files. Say yes when you run it and it asks you if you really want to do that. Reboot when done. When you go back to check, your drivers will be all signed and the 444 (and signed) label will be there.
Unfortunatly, this stuff happens even if you correctly disable the virus scanner before performing the operations. But, worse happens if you leave stuff running, so yeah, make sure you close your programs in the taskbar and the virus scanners before installing software.Message Edited by Eck on -8-2004 06:0 AM

Is thier a command for looping. somthing like sym.loop("") or EC.Sound.loop(""). I mainly need this

is thier a command for looping. somthing like sym.loop("") or EC.Sound.loop(""). I mainly need this for two work for looping a sound file.
Thanks.

Hey, sabermaster-
Not at the moment, though you can create your own loop effects by using triggers on the timeline. What specific functionality are you looking for?
-Elaine

P55 GD 80 Lock Up Sound Loop Problem

Hello, I recently built a new i5 GD 80 computer two months ago. From almost day one Ive had problems on the desktop and in games with a hard lock screeching sound loop. At first I thought it was my PSU or GTX 280. So I swaped in new PSU and an ATI 5870 from another computer I have and got the same thing. However the GTX 280 will lock up, purple screen chicken wire, and sound loop. Where the 5870 does all but doesent purple screen. Ive exhausted my mind trying to troubleshoot this for the last two months and am probly going to have to RMA. I will list what Ive tried and my full specs. Again I have another computer to test the vid cards in and they run fine. Anyone that can help would be apperciated, thanks.
-two different OS's on two different HD's Vista and Win 7
-two vid cards with at least 4 differnt drivers
-two different PSU's
-onboard and xfi sound card
-two pcie slots
-memtest 1 hour passed
-super pi 1 hour passed
-load temp of cpu 40c load temp of gpu's 70c
-checked and rechecked all PSU connections
-updated BIOS's through 1.7
-Bios fail safe defaults
Full Comp Specs
win vista and 7
two Raptor 150's
i5 920
4 gigs Corsair
Corsair PSU hx620 and hx750
x fi

Check stability with Orthos http://sp2004.fre3.com/beta/orthos_exe_20060420.cab
For details ==> https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534
Also stress test VGA with MSI Kombustor:
http://event.msi.com/vga/afterburner/images/MSIAfterburnerSetup151.zip
Post back results

Black screen then sound loops on cq5320y

System specs.
Athlon 2 x4 640
4 gig memory
HP motherboard cq5320y
Corsair 500 w power supply
500 gig HD
HD 6670 video card
The issue I am having is upon playing world of tanks anywhere from 5 minutes to 2 hours I will get a black screen and the sound will loop. The monitor will says it is going to sleep. The only fix is a power off/on. This sometimes gets courpt files then have to run chdsk. So it does have most recent drivers and I have tried so old ones with the same effect. Today daughter was playing an online(facebook) game and same thing happen. So I put back in my first video card hd 4550 that used to not have this issue. Then started playing WOT and again got black screen and sound loop. So I am not thinking it is an video card issue since it happens with both video cards. Power supply voltage checked out okay by meter. So not sure where to go with this issue.
Only thing I am think is the ps is over power the video card through the old motherboard????
Any other ideas

sirdano wrote:
System specs.
Athlon 2 x4 640
4 gig memory
HP motherboard cq5320y
Corsair 500 w power supply
500 gig HD
HD 6670 video card
The issue I am having is upon playing world of tanks anywhere from 5 minutes to 2 hours I will get a black screen and the sound will loop. The monitor will says it is going to sleep. The only fix is a power off/on. This sometimes gets courpt files then have to run chdsk. So it does have most recent drivers and I have tried so old ones with the same effect. Today daughter was playing an online(facebook) game and same thing happen. So I put back in my first video card hd 4550 that used to not have this issue. Then started playing WOT and again got black screen and sound loop. So I am not thinking it is an video card issue since it happens with both video cards. Power supply voltage checked out okay by meter. So not sure where to go with this issue.
Only thing I am think is the ps is over power the video card through the old motherboard????
That is not very likely. The power to the video card is regulated by power circuits on the motherboard.
Any other ideas
Which OS is installed and which type is it?
When was the last time you went to the command line and used the system file checker? sfc /scannow
Have you refreshed the swap file recently?
How about your temp\tmp folder?
What are you using for an active antivirus\malware solution?
Which JRE are you using? Are you sure it is the most stable version?
Are you certain this is not a temperature related issue?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Garage Band LOOPS question

Hi,
I guess this question can apply to both Logic and GarageBand. When using loops am I locked into the "key" that they appear in? What I mean is this. Let's say I make a song in Amajor in 4/4 time. At that point all my loops appear in the key of A. The problem arises when I want to take the chord progression maybe from I - IV - vi - V - I or something. My question is... can I make those same loops play the appropriate chord for the key signature?
I hope this makes sense.
Thank you for any help you can offer.
B.

..I'm not exactly sure what you're asking. But..All the apple loops I've encountered have a series of different notes in one key. You can transpose them, but then not all of the notes in that loop will sound good with the original key. Does that make sense? For example...if you have a loop in A, then play the loop again in D (the IV of A)..it's likely it will contain G natural...a note that occurs in the key of D, but would sound bad in A.
On top of that..most apple loops are simply melodies. I would recommend layering one of them on top of a bass or piano or synth you'd recorded that would play the chords you want in your song.
Hope this answers your question.

Use actionscript to trigger independant sound loop and reset

Hello guys,
I have a bit of experience with flash and actionscript, but due to the fact that I don't use it frequently, it happens that I forgot most of what I can do.
I am about to start a sound project but I wanted to make sure it works before starting research.
I want to use actionscript to click on letters that will display on the screen, and each letter will trigger an audio loop independantly, hence creating music.I also want to be able to reset the animation, erase all letters and sounds in order to restart. Actually that is the main question
If it is possible, how ? Would you mind giving me some tips for a "kickstart"

Is it possible, with flash to put different sounds triggered by a set of a buttons into a track and play this track in a loop ?
I want to make it so when you press for example buttons A, then B, then C, it will play the sounds A, B and C respectively in an infinite loop. So when you click A, B, C, D, E, it will play ABCDE.
EDIT: I succeeded ! I had to use arrays to do that. But now I would like that instead of putting the sounds automatically into the array at the beginning (red part), I want to be able to put by clicking on different buttons. It means if I click "A" first it will put the A into index 0, then B and put into index 1, then C and put into index 2, and so on. Also loop it indefinitely. How can ?
var musicTrack = new Array();
var aNote:a = new a();
var bNote:b = new b();
musicTrack.push(aNote);
musicTrack.push(bNote);
musicTrack.push(aNote);
var musicChannel:SoundChannel;
var currentSongIndex:int;
function onPlayBtnPressed() {
currentSongIndex = 0;
playSongFromIndex(currentSongIndex);
function playSongFromIndex(songIndex:int) {
musicChannel = musicTrack[songIndex].play();
musicChannel.addEventListener(Event.SOUND_COMPLETE, songFinished);
currentSongIndex++;
function songFinished(e:Event) {
if (currentSongIndex < musicTrack.length) {
playSongFromIndex(currentSongIndex);
} else {
currentSongIndex=0;
onPlayBtnPressed();

Sound looping question

Similar Messages

Maybe you are looking for