SOUND LOW ON RINGER AFTER UPDATE.

Has anyone been able to fix the ringtones that are much lower after the last update?

Personally what I do is turn up my ringer 75% and it sounds as loud as any other phone to turn it up or down go to sounds under your general settings and turn the ringer up higher if you have it at maximum and it is still to low then it's the ringtone your using or you have blown you speaker their is only 1 speaker on the 4s and 4 models it's the right one on the bottom and the one on the left is the microphone this is a fact only known to some apple users many believe it's both and figure their speaker is broken on one side.

Similar Messages

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Has anyone noticed a problem with low/no volume after update to iOS 8.1.3 ?

    HHas anyone noted a problem with low or no volume after update to iOS 8.1.3?

    Although this reply is late.  I just want to share that I have the same issue - no LTE after upgrade to 8.1.3 on my iPhone 5.  No matter switch on/off iPhone or LTE option or Airplane Mode -  they all didn't work....but after an upgrade to 8.2 today.  I got my LTE back now after a month...not sure if it is a bug or a reset work.  Good luck to anyone who looking for the resolution of same issue.

  • Iphone 4s no sound via music player after update to ios 7

    I was totally depressed by you.My iphone 4s is having a problem with sound after updating to ios 7.0.3.No sound via music player. Some times i can hear sound but it is repeating same problem,suddenly sound disapears.I think it is the problem with the software ios 7.
                        i hope you will solve through another update..............................................................

    Hello everyone, I am having the exact same issue. My charger stopped working following 7.0.3 upgrade. I since bought couple more charger (must admit one was definately counterfiet; and the other one what I believe to be genuine purchased from ebay). I even tried my friend's genuine apple charger that came with his 5s which is also not working.
    What is the resolution?

  • No sound from m4v files after update to IOS 5.1

    Hello
    After updating my AppleTV3 to IOS 5.1 there is no sound from mine .M4V files.
    MP4 plays just fine. My apple TV is connected to LAN, and uses HDMI through my receiver.
    Has anyone experienced similar problems?

    Bought a new ATV3 and updated software.  Gives me picture, but no sound when I play movie trailers on the Apple service.  Also, no sound when I play purchased movies.  These same trailers and movies play through my ATV1.  Installed my new HDMI cable on the ATV1.  No change.
    I'm not interested in plugging directly into the TV.  As I use an HDMI switch, the ATV3 follows the same path through the receiver.
    Right now the thing is just a paper weight.  Doesn't give me sound when mirroring from my iPad which was my reason for buying it.

  • Ipad air sound and battery problem after updating to ios 7.1

    After ios 7.1 update my ipad air passcode sound is muted for first digit. The audio volume is lowered in video player.
    The worst thing is battery is draining faster.
    Dear Apple,,,,your most advanced mobile operating system is getting worse and worse......please fix your bugs.

    check the brightness level on your iPad , try to lower it and see if this solve the problem .

  • Lower graphics quality after updating 2.2.1.

    Is it just me, or any body else has notice that some of the buttons and transparencies on the iPhone are lower in quality than the early 2.2. version of the firmware? I just update to 2.2.1 yesterday but ever since I've notice this, for example, *look closely on the keyboard of the phone app, check the green button to place the call, it looks blur!* I don't remember if this looks the same on the previous 2.2. version, but I don't remember notice it before. Is like if they use a lower render bitmap here.
    Am I becoming very demanding with the graphics or just been paranoid?
    By the way, have no trouble with battery or dropped calls. Everything seems to work fine, except for the lack of quality in some graphics and some minor bug when I wake the phone, the click sound does not sound louder all the times, sometimes it sound very low.

    I hope I'm just been paranoid, I'll hate to see the quality of the graphics on the iPhone dropped, because the interface is just so beautiful and well care in every detail. And well after all, Apple has always been in the market of graphics ever since they came up with the first graphic interface for the Mac back in 1984. I'll always think that mac os graphics look better that other OS, and now the iPhone looks like nothing before, so, that's what I'm been so demanding on the graphic quality issue. Right now, my iPhone is what keeps me close to Apple Computer, because right now, I'm stuck with a windows pc computer for the moment, and the iPhone is my Mac right now, so I don't want to lose high quality graphics, imagine how will you feel, if all of the sudden your mac os X desktop looks like Windows desktop? That's a nightmare! Right?

  • No sound from Thunderbolt Display after update to OS X 10.9.3

    So I updated to 10.9.3 this morning only to find there is no sound coming from my Thunderbolt Display after installation. Sound is now only audible from my MacBook Pro (late 2011). Also, see image below, there is no sign of any connected inputs other than my MBP now. I've shutdown and restarted a number of times, but still no audio from the display.
    Really starting to wonder why it's worth spending so much on Apple products now...

    I sent my TB Display in for repair. They had it almost a week and didn't find anything wrong with it. Instead they took in my MacBook Pro and replaced the logic board (2nd time it had been replaced) and the Display seems to be working fine now.
    ...except that for using 3rd party video conf apps, those apps only pick up the MBP camera (even though i try to change settings in app), not the TBD camera... but FaceTime and Skype find the TBD camera.
    Strange.
    Nickkett wrote:
    I Bought all Apple to be 100% compatible and "Just Work"...
    I completely agree with that sentiment. That's why we pay through the nose for their products, so it feels very bad when they don't just work.

  • Sound issues in games after updates

    Hi all,
    I have a Quad w/ 2GB RAM, 250GB HDD and 7800GT. Just a couple of days ago, all the games I play worked fine (Rise of Nations, Rainbow Six III, Ghost Recon, America's Army etc. etc.). Now, when I load Ghost Recon, I get music on the menus, but no sound at all in the game. Rainbow Six III refuses to load at all (I get a blank black screen). America's Army's sound seems to be of terrible quality now, and finally, once Rise of Nations passes the intro movie and gets to the splash screen, it quits just as the music plays and loads the menu.
    I've checked all audio settings everywhere - in the games, system prefs etc. iTunes still works fine, and I can still watch movies.
    This only started happening after I installed a few Apple updates (specifically, the latest Security Update and iPhoto). I thought that if I updated QuickTime the problem may go away, so I downloaded the patch but this did not fix anything.
    I ran the extended hardware test to see if anything got picked up, but it doesn't appear to test the Sound Card (which I am suspecting). It's more likely a software issue though, right?
    Any one else in a situation similar to mine? Would a simple re-install of Tiger fix up the issues?
    Thanks in advance,
    -Travis
    PM G4 DA Dual 1GHz, iMac G4, iBook G3, Dual 2.3GHz G5, 40GB 4G iPod   Mac OS X (10.4.6)   (in the G4) 768MB RAM, Radeon 9800 Pro, 120GB + 30GB HDD, Pioneer DVR-109, 2 19"

    Don't worry, I fixed it the day after posting. Had to change the output frequency in the Audio MIDI Setup Utility
    -Travis

  • Pavilion dv5020ca sound will not work after updating xp to vista home premium

    HP Pavilion Dv5020ca   windows vista home premium
    After upgrading from xp to vista the drivers for my sound card will not install and the error message i recieved was
    cannot find media any help would be apperciated
    This question was solved.
    View Solution.

    Hi:
    See if installing the XP audio driver works...
    Download and run this driver.  If it automatically installs the audio, great.  If not...close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&dlc=en&lc=en&...
    Go to the device manager and click on the multimedia audio controller needing drivers.
    Click on the driver tab.  Click on update driver.  Select the Browse my computer for driver software option and at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
    The select Have Disk and browse to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver installs.
    Then reboot.

  • Sounds didn`t work after update to iOs 7.1

    After the update to iOs 7.1 the sounds (incoming calls, Whats App, Facebook) didn`t work on my iPhone 4 when the screen is locked. If I like to hear music or the screen is unlocked, they work.
    Can somebody tell me what happened and how to solve that problem? Thanks for your help!

    No problems with Wi-Fi on iOS 7 here.
    Try restoring the software > iTunes: Restoring iOS software
    Might want to try this first ...
    Tap Settings > General > Reset > Reset All Settings

  • No sound in multimedia playback after update (xine,vlc,mplayer)

    Hi!
    For some days now I don't have sound anymore in amarok and vlc. Since the sound works on e.g. youtube I don't know how to find the root of the problem and of course not the solution. In amarok my sound card doesn't show up any more. I'm using ALSA. "aplay /usr/share/sounds/alsa/Front_Center.wav" doesn't give any output. (I don't know if it matters.)
    I already spent time in searching (googling) by myself without success. Can anyone give me a hint?
    Thanks in advance,
    Maximalminimalist
    Last edited by Maximalminimalist (2010-12-14 20:05:41)

    Ultraman wrote:What vitals did you check? What DE/WM are you running? KDE by any chance?
    I'm using i3. (tiling WM)
    Ultraman wrote:Did you check the mixer? Anything muted there? Probably not, but worth a check.
    Alsamixer should be fine. (Sound works on youtube anyway.)
    Ultraman wrote:Have you blacklisted the snd-pcm-oss module to prevent some app using OSS instead of ALSA and claiming the soundcard that way? (rc.conf -> MODULES=(!snd-pcm-oss) )
    No, I even had it in the modules but the "!" makes no difference.
    Ultraman wrote:If you are running KDE: Have you checked Phonon's settings? Does it recognize any backend (e.g. Xine, Gstreamer)? What about sound hardware?
    I'm not using KDE but amarok recognises xine.
    Ultraman wrote:Tried starting VLC and Amarok from a terminal and looked at the output they send to it? Perhaps any error messages among them?
    When I start VLC from terminal I get this:
    vlc Weird\ Al\ Yankovic\ -\ White\ And\ Nerdy\ \[HQ\].avi
    VLC media player 1.1.5 The Luggage (revision exported)
    Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
    Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
    Blocked: call to setlocale(6, "")
    Blocked: call to sigaction(17, 0x7fec095fbac0, 0x7fec095fbb60)
    Blocked: call to setlocale(6, "")
    frame skip 8
    frame skip 8
    When I tell vlc to use alsa. (Which wasn't necessary before.) I get this as a "pop-up error":
    Potential ALSA version problem:
    VLC failed to initialize your sound output device (if any).
    Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue.
    But pacman tells me:
    pacman -Qs alsa-lib
    local/alsa-lib 1.0.23-2
    An alternative implementation of Linux sound support
    local/lib32-alsa-lib 1.0.23-4
    An alternative implementation of Linux sound support (32 bit)
    EDIT: I just tried KDE. (I have it installed but don't use it.) Everything is weird. I can't press anything right with the mouse because everything is mirror inverted and some zones are covered with a weird mix of pixels...fact is KDE doesn't work fine on my computer right now.
    Last edited by Maximalminimalist (2010-12-12 04:01:53)

  • No sound or music playback after update

    I updated my AppleTV today, and now it won't play my music stored in the device and there is no sound from the unit. Any fixes?

    Same problem here. Whe I power cycle TV or go to another channel and back, HDMI syncs and sound is back for about 5 seconds, then it is gone again. Seems like a broken HDMI handshake...
    I do get the startup sound and some menu soundeffects. Even AirTunes from MacBook to ATV and then to TV is working! but none of ATVs local contents or internet trailers give any sound.
    EffBee
    Message was edited by: effbee

  • Sound doesn't work after updating to Yosemite.

    iTunes, sound effects (swoosh when mail is sent), videos on internet...no sound at all since updating to Yosemite. I press the volume key and get the symbol of a speaker with a circle crossed out beneath it. Not over it, but beneath it. I went into system preferences and sound, but don't really understand what might need to be done there or even if that's where the problem is.

    1.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
        Try this even if you don’t see the red light.
    2. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the  appropriate method.

  • Sound problems with apps after updating to IOS 5.1 with Ipad 2

    Hi there,
    I am having a sound problem since the update to ios 5.1. I have an Ipad 2 and all my games don't play sound anymore. I tried to redownload the games as well as restarting the Ipad, but nothing worked for me. Does anyone of you have the same problem?
    best, addario22

    Try backing up and doing a full restore and see if that helps.

Maybe you are looking for

  • Maintain Tolerance limits for  tolerance key B1

    Hi, When We tried to reverse a 'reversal' document using MBST  but the system does not let me a throws up the following message no. M8125... "maintaintolerance limits for tolerance key B1 (CoCode 5000)". I checked configuration in OMc0, we have  lowe

  • Download data from internal table to flat file.

    I need to download the data from Internal table to Flat file. can any one suggest how to do it? i suppose WS_Download OR GUI_DOWNLOAD. but if it is please guide me how to use this. is thre any other F.M. please provide the information. Thanks in adva

  • Template Editable background-image

    Using Dreamweaver templates. I would like to be able to customize a background image in a DIV ID on individual pages. Can someone offer some sample code? Thanks. Dave

  • Access XML array inside MovieClip. How ?!

    Hello, Ok, I have a code to load Multiple XML files at once and save it to an array named xmlDocs like this: //each xml file to load var xmlManifest:Array = new Array(); //the xml for each file var xmlDocs:Array = new Array(); //the xml file with all

  • GWCheck repetitive 'CODE 93 unused blob files (deleted)

    I've run the standalone gwcheck a few times now. with 'contents+attachment file check' and Fix problems. I've run it on user/message. It seems to me that it keeps reporting the same message after every run, I get Correctable conditions encountered: C