Sound missing from one clip when dvd made

I am using the current version of iMovie. When I burn a DVD via iDVD (and save to Mobileme) I have one clip where the voice track drops out. This clip was filmed at the same time as others and plays fine in iMovie. I've tried replacing the clip with the original but that does not help. Any thoughts?

I just tried detaching the audio but this did not fix the sound issue for this clip.

Similar Messages

Audio Completely Missing from One Clip

I have been working on a project for several days. When I transferred from working on my laptop to my desktop, working via an external hard drive, one of the clips audio is completely missing. It was there today but now it is gone. It is not in the source window, the wavefroms are not shown on the timeline sequence, it is not on the audio panel and it is not in the audio track mixer. The original file still has audio, I am able to watch it via VLC and the sound is there. I replaced the clip with the original but the same problem persists. I checked the audio channels in modify but nothing there seems wrong. No other clip is having this problem.

It is working now. I went to the source file and changed its name then relocated it so PP could find it. No idea why this happend.

Help - sound stream from one clip playing over stream from another.

I have a layout with narration and a nav bar. When I click a nav button for section 2, the audio from section 1 (set to stream) continues to play over the audio for section 2. This cumulates so if I click buttons for sections 3, 4 and 5, I get five audio files playing on top of each other. Please HELP! Sections are individual movie clips with embedded audio streaming on a Sounds layer in each movie clip.

Thanks, yeah, I'm not great on Actionscript, but I can work my way through it (AS3). Currently the sounds are just in a sound layer on the timeline and aren't controlled by actionscript. So if I put SoundMixer.stopAll(); in the first frame of each section, I need sound play() to start the new audio? Each section has several narrations that are timed to the animations on the timeline, so rather thatn having the sound in the timeline, I need to trigger them with the actions script? How would I code this - say my sound file is named sound22.aif would this be correct?
snd22 = new Sound();
snd22.attachSound("sound22.aif");
snd22.start();

Moving sound from one clip to another?

Can I take the sound from one clip and move it so that it plays during another clip?
In other words, if I have some narration in one clip that would be better in another clip, can I pluck out that sound (narration) and re-locate it so that it plays at the same time another clip (video) is playing?
I know that FCP can do this..you just cut out the sound portion you want and cut/paste it into whereever you want, beneath the visual part of whatever clip you want it to play with.
thanks!
ray

Is it possible to take sound from one clip and put it in another clip?
Yes

[iPad Mini no Retina, iOS 7.0.4] Sound in only one side of earphone (no mic), but sound come from both sides when using FaceTime

Recently, I found with iPad Mini w/o Retina, iOS 7.0.4, the sound comes only from left side of my earphone when listening music, watching YouTube videos, even playing system sound. But the sound come from both sides when using FaceTime.
Earphone is not broken. Plug completely into the audio jack. This problem only shows up recently, worked fine weeks ago.
Anyone has the same problem? Or has some solution on this issue?

Settings>General>Accessibility>HEARING>Adjust the Left and Right Speaker with slider

Can one copy Audio from one clip minus its video...to paste to another?

I'm working on a painting video...as an artist/teacher...and easily created a 3 minute trailer on YouTube using iMovie...
http://www.youtube.com/watch?v=8LXWxjjGkAg
I have Final Cut Express 3.5.1 on my intel...and thought I'd best use this higher standard software for the making of my 90 minute DVD...but dang, its coming hard for me. Trying to make sense of the help manual. With iMovie it was nothing to copy an audio track, copy and paste elsewhere...but with FCE I can't seem to separate the audio of the track from one clip to copy and paste elsewhere without that video clip wanting to come along.
The original clip is me painting by a waterfalls..the original narrative voicing was weak, so I did a voice over with a mic and toneport tonight, now I want to paste in the sound of the falls behind copied from a clip where I did no speaking.
I have Soundtrack as well. Am I better off just putting my video clips together in FCE...then importing the whole thing to Soundtrack to edio audio? Seems audio with FCE is tough...well, for me anyway. Thanks

Hi -
In FCE, select the clip on the timeline that has the audio and video stuck together. Go to the menu Edit and toggle Linked Selection (the check mark will go away).
Now you should be able to copy and paste one without the other.
Hope this helps.
MtD

How can i leave audio from one clip playing, while showing another one in i

i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
[See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

No way to apply filters/color from one clip to another?

What am I missing? I don't see any way to take the color/filter settings from one clip and lift/stamp them onto another clip.

highlight the clip that you have adjusted. Right click and choose copy. Then highlight all the other clips you want to add the filter to. Right click and choose Paste attributes. A window will open asking which attributes to paste. Choose filters.
Good Luck!

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

Suggestions for blending audio from one clip to next?

I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
Thanks.

You can create a crossfade (essentially an
audio dissolve) from one audio clip to another.
With the audio track(s) targeted, park the Playhead at the
audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
You need to be sure you have sufficient 'handles'
on both clips to accommodate the crossfade.
Creating an audio crossfade
http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

See the following thread on the same topic:
2 Thunderbolt displays MBP = sound coming from both displays?

I NEED TO SHARE MY LR CATALOGS FROM LAPTOP TO MAC AND EVEN IPAD WITH NO EXTERNAL DEVICES - I WOULD LIKE ANY EDIT I MAKE FROM ONE COMPUTER TO BE MADE ON THE OTHER - HOW DO I DO THIS ?? THANKS!!

I NEED TO SHARE MY LR CATALOGS FROM LAPTOP TO MAC AND EVEN IPAD WITH NO EXTERNAL DEVICES - I WOULD LIKE ANY EDIT I MAKE FROM ONE COMPUTER TO BE MADE ON THE OTHER - HOW DO I DO THIS ?? THANKS!!

All the info you do with your image files is stored in the Lightroom Catalog file. The Catalog file cannot be located on a network it must have a physical connection to the computer.
While the Catalog is in use a LOCK file will be temporarily placed alongside which prevents its use by any other device.

Can I restore my system from install discs when DVD is not working?

Can I restore my system from install discs when DVD is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
Thanks

Problem solved - I posted on the general Tiger Discussions as well.
I had the wrong machine started in Target Firewire mode.
http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0

Sound missing from one clip when dvd made

Similar Messages

Maybe you are looking for