Sound muting problem after missed calls

Using Skype 4.9, but confirmed with 4.7 as well.
Android 4.2.2 JB, standard theme.
After a missed call, my FM radio stops working, and also I find all other sounds quieter byt more than 40-50%. No volume control app helps (tried many), the volumes don't seem changed. The FM radio apparently finds stations etc. but no sound. As if it is muted, and all other sounds seem to be affected by some more master volume no app could affect.
This whole mess is fixed when restarting the phone, or when I make another call to Sound test service (or other contact) - just establishing a call is enough to fix the issue. This is not always a solution for variety of reasons.
Also letting skype exit (after signout) completely fixes the issue. But this "exiting" takes hours most of the time - its VideMonitor service stays for hours after signout, sometimes days. Unacceptable.
This is Very frustrating to the point i stopped using skype until this is fixed.
It seems Skype doesn't restore some volumes/mute after a missed call.
The mentioned workarounds are not always viable, especially when I'm away from Wifi range. Is there another workaround, or better, a fix, when I miss a call, skype should restore sound volumes and any muted channels (fm radio).
Thanks.

The very same problem on Huawei Ascend G7...
After missed call skype turns off all the sounds in the phone including alarm.
I did late on work today because of it...
Why nobody from the developers don't take this seriosly and to clear up that serious issue..???

Similar Messages

Problem after missed call

Dear,
When some one call me and I can't answer. There could be a missed call. However, my phone displays the picture above and I can not do anything with the phone. So i need to push the Power button to restar phone.
Please help me, I try to restore my phone 3 times, but the problem is still happenned.
Thanks & Best regard

wardcst24 wrote:
I Have Sent my Phone in 4 Times and they are having me send it in for # 5
They sent a NIB Phone last Time And I Activated it and with in 2 Hours it was Missing calls.
The Calls go to Voice mail after the 5th ring when I called and my Phone Does not Ring.
Until you hit power Button to Wake it up
If you are Having This Problem Please Post So we can see How Common and How many are having this Issue.
Thanks
This person tells the problem better than I So hope they don't mind me putting this in.
Ever since the software upgrade my phone sometimes does not receive incoming calls when it's in sleep mode. It doesn't wake up, ring, buzz or anything. It doesn't record the missed calls in the Call Log. And if the caller left a voice message, it doesn't show the voice mail puzzle piece in the unlock screen.
This afternoon my wife tried calling me while my phone was asleep (screen saver on , but not powered off).
She was using her ATT wireless. We were in the same room, and she had here speaker on. So I could hear
her phone dialing and my line ringing. Nonetheless, there was no response from my phone for several rings. So I pressed the right side button, woke up my phone and unlock it, then it began to ring!
Later I tried calling my phone from my work phone while it was sleeping. It woke by itself up and rang immediately. This was an ATT land line.
What is going on?
I looked through every menu I could find to see if there is a setting I need to change. I can't find anything relating to this problem. Could it be an issue with Verizon vs ATT Wireless?
I would greatly appreciate any help!

How to hide or do not show the receipt's name after miss called?

1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.

I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues?

Iphone hangingng after missed call

My iphone sometimes after missed call in lock screen what is the solution knowing I wasn't face this problem in IOS 6

Hello there, Abomosa.
The following Knowledge Base article offers up some practical steps to try for troubleshooting issues with an application not performing as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
When performing Step 2, I would recommend closing all applications that are running. If you perform Step 3 and the issue persists, you may want to try resetting as well:
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
Additionally this article offers some great information for Display issues as well:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If you find the issue is still unresolved that same article offers the following:
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Q10 ring tone continues to play after missed call

using q10.
the ring tone continues to play after missed call. tried to change the ring tone from song to default ring tone available in the os but the problem remains the same.

I recommend installing the official version 10.1.0.4181
By now also tell them that these errors will be fixed in the next official update to OS 10.2 is expected to be available soon.
My thinking about the end of October.
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Ring tone continues to play after missed call

Hi,
When i got a missed call, the ring tone continues to play after missed call. tried to change the ring tone from song to default ring tone available in the os but the problem remains the same.
I had the latest 10.2.0.249 OS

I recommend installing the official version 10.1.0.4181
By now also tell them that these errors will be fixed in the next official update to OS 10.2 is expected to be available soon.
My thinking about the end of October.
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

N78 Reboots After Missed Call

Hello to everyone!I have noticed that many times,my N78 reboots after I receive a missed call.On the top right of the screen appears something like a talk bubble containing a phone icon that turns from green to orange and back.After this happens,my phone reboots.I did restore factory setting but nothing changed..I notice that this problem stops when I get the microSD out of the phone.I thought that there is a file containing virus in it..but I replaced my microSD with an empty new one but reboot goes on...Please help I cant stand the 60mb phone memory!

Hello there, Abomosa.
The following Knowledge Base article offers up some practical steps to try for troubleshooting issues with an application not performing as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
When performing Step 2, I would recommend closing all applications that are running. If you perform Step 3 and the issue persists, you may want to try resetting as well:
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
Additionally this article offers some great information for Display issues as well:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If you find the issue is still unresolved that same article offers the following:
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Podcast automatically playing after missed call?

Hi,
Using the iPhone 5 and the last 2 days I've had missed calls while the phone is on silent then once the call is missed my podcast I last listened to starts automatically playing? Bit of a pain when you work in an office...
Any idea why this is happening people?
Thanks alot
Martin

anybody?

My iphone 5c hangs after missed call, My iphone 5c hangs after missed call

My phone hangs afer ving a missed call and also in recieving call its slide touch doesnt work

Its worth a shot but try going into Settings > General > Accessibility and turn on "Reduce Motion" I think that might help...

Walkman sound remains muted after missed call on headset

I've noticed on my Z1C that if I receive a call while playing music through the headset, the music mutes to play the incoming call ringtone as expected. However, if I do not answer the call, the walkman continues to play the track again, but the sound is muted. I have to press pause, then play, to hear the sound again.

Thank you for the feedback. Could you state which headset your are using?
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Sound/Video Problem after Downloading iTunes 10.5

I recently downloaded the most recent iTunes update, 10.5. After downloading it, I am having problems with the sound and picture of television shows. When I try to watch a tv show, the sound is muffled, and the picture slows or skips constantly. This happens on every tv show I've tried to play, not just one. I haven't noticed any problems with sound from songs though. I had this problem once before after downloading the previous version of iTunes, and completely uninstalled and reinstalled iTunes to solve the issue, and it worked. However, I tried doing it once again this time, and there was no success. I've tried disabling sound enhancements, and that also had no effect. Quicktime is installed and updated as well. I'm running Windows 7. Any help or advice is appeciated.

I'm not sure I quite understand what you mean. iTunes doesn't save a folder of playlists, but if you mean that the iTunes library is empty, or doesn't contain playlists that it had before the upgrade then either restore your backup or make use of the following...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps youshouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Strange sound/sync problem after encoding in CS4

Hi guys and gals, wonder if anyone can help me out on this one?
I'm running PPro CS4 on a purpose-built matrox rtx2 system, working mostly from DVCAM.
I've done a complete edit, cutting various interview soundbites over music to make a testimonial montage. After doing the complete audio mix, everything sounds fine and dandy when I preview it after rendering. The problem occurs when I output the film using AME to a variety of different formats. Where previously I had precise edits on the timeline, the audio cuts sound to be a couple of frames out. For example, one cut occurs just after the line 'ideal product for our needs' and sounds exactly as it should on the timeline, but on the outputted file it sounds like he says 'ideal product for our nee...'
Same thing occasionally happens on music mixes, when I cut to the beat to use different sections of the backing track and crossfade through, it sounds fine on the timeline but then after I output the file then cuts the sound off the beat and the music sounds like it goes slightly out of time on the transition.
I've even tried rendering it out as a wav file, but that doesn't work either.
Is it something I'm doing wrong? I've checked and it's all 48k sound (and if it was a sample rate issue I assume it would appear on the timeline as well). Or is it another to add to the long list of problems we've had with the matrox setup?
Any help will be greatly appreciated!
Cheers,
Kev

Kev,
Could it be that the preview of the timeline is inaccurate as opposed to the outputted file?
Let's check this out. First, is there a red line above your Clips in the Timeline, just below the Timeline Ruler? If so, hit Enter to Render those Clips for smoothest playback. Note: Audio can need Rendering too. Does this help?
If not, set the WAB (Work Area Bar) over a small section of the Timeline, though one that exhibits the OOS issue. Export to your desired format/CODEC and test. Do you get OOS in the Export?
For a bit more on Rendering, see this ARTICLE.
For a look at the WAB, see below:
Good luck, and please report,
Hunt

Sound volume problem after upgraded to Lion Mac OS X 10.7? Any help?

I have just upgrade to 10.7 Lion last night. Whenever I change the volume, no matter by pressing the volume up or down button on the keyboard, or using the mouse to change the volume on the top bar, the computer hangs for a while, with no sound, for a few seconds, the youtube video reset or hang, even the Safari hangs for a few seconds.
Anyone has the same problem? Any fix on this?

Another thread suggested this fix see screens
Removal of the following files
~/Library/Preferences/Audio/*.plist
~/Library/Preferences/com.apple.soundpref.plist
This is a possibility for a fix.
Christopher Reynolds, ASQ CRE, PMP, BS IS

Help needed - bose sound dock problems after update

I recently updated my iphone 3GS to the new iOS5 update and ever since then, it will not play music through my bose sound dock and it won't even charge. Has anyone else experienced this problem and if so, is there a solution yet? Seems like an expensive waste of kit to have my bose sitting there lifeless!
Thanks for your help!

Im experiencing the same problem with my ipod touch not playing through my bose soundock! How do I fix it? Please help

Problems after porting Call Sign number.

We have today ported our Callsign number from BT to a VOIP provider as we are moving.
The ported number works fine
Our main number is now not working. All I get from "Inidian Telecom" is the network is working correctly & everything is fine. We can send an engineer but may need to charge!
I get a dial tone, the problem is when we try & dial out or dial in we get nothing but a bleeping.
Talking to the call center is like talking to a scripted brick wall.

MartyUK wrote:
Correct it isn't my number.
That would be great but we are not moving until the 12th of March and it seems BT have screwed up.
We are not taking the current number with us as we are moving 100 miles away.
I'm glad the broadband is still working
Anyway I can get the number reconnected until the 12th March?
I would not rely on the broadband to keep working, as if there is a cease order for it, then that will go as well.
The change of number to the "stopped line" would have been done automatically, as you are not taking the number with you.
As for the possibility of getting it re-instated, you would have to ask one of the BT Care Team to take a look on the system, to see what has happened.
If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Sound muting problem after missed calls

Similar Messages

Maybe you are looking for