Sound not matching movies

sounds not matching movies

I've not noticed the problem but then I generally do not watch that channel.
You didnt say.. do you have a DVR or a non-DVR
If you have a DVR, there has been a thing I have noticed occasionally. The DVR's buffer the signal. (we all know this) and if you listen to the same channel on a DVR and a non-dvr. the DVR will be about a second or two behind the non-dvr. makes for some interesting echo effects when multiple boxes are watching the same channel.
Well I've noticed that sometimes on my DVR, it acts like the picture/sound are trying to keep up with the other tv's. The impression I get is like a dog pulling on the leash trying to go faster than the leash will allow.
I've found that if I pause the pic on the DVR for about 10 seconds, and run using the fully buffered signal when ever I see that the sound and pic not match, it solves the problem. Doesnt happen often but I do it without even thinking now... Hope it helps someone

Similar Messages

Sound not matching recording Captivate 7

I just completed my first recording with a SME (subject matter expert) and am running into some major issues. The recording does not match the sound. I had the SME record the audio as they were simulating the software. All of the audio is playing but not all of the content that we recorded. A lot of the actual demo is missing and so the audio recording is talking about things that are not even showing... does this make sense? I am so confused and cannot figure out what I did wrong!

Hi there
What type of recording did you do?
One of the "Stop motion" types? (Demonstration, Assessment Simulation, Training Simulation) or was it a Video Demo?
Cheers... Rick

Movie Cover-Art Does Not Match Movie When Sharing On iPad?

The movies that are on my iTunes display properly. The movie cover-art matches the actual movie.
I turned on sharing in iTunes and when I select Video > Sharing on the iPad The Cover-Arts do not match
the actual movie it represents?
Seems to look right on my AppleTV and on my iPhone but not the iPad. I also noticed that when I select the
the sharing icon on the iPad it loads it way faster than before. I am thinking that it's loading it from bad cache.
Is there a way to have it actually reload the data or clear its cache?
What I have tried;
I have re-booted the iPad and that did not work.
I have also turned sharing off and on on iTunes and that did not work

Bump

Sound not matching mouth

why is it whenever i have a video i want to put on my ipod 5th the sound does not match the mouth. i have tried this on about 3 differnt converters and they all do the same thing. The video is fine before converted (in not ipod format) but when formated the problem happpens. Any help please

It really hapens to you all the time?
What generally happens is that there is a bug in most converters where on occasion they will lose a few seconds of audio or video and of course then they don't sync properly.
i think most converter freewares even acknowledge it in their FAQ.
but it shouldn't be happening all the time.
so either you have incredible bad luck with the things or something wrong is happening but I'm not sure what it would be.
so good luck to you.
hope it works out for you eventually

Audio and sound not matching when importing

Hello - I've been importing footage from a miniDV from my Panasonic - the footage contains about 10 dance numbers. I had no problems, until I noticed that one of the dance numbers was a little 'off' in Final Cut. I checked the footage again, viewing it on the camera, and it was fine, so I imported again, and the dancing and the music was off even more, yet the video and audio tracks were lined up.
So then I tried importing into iMovie, and that worked just fine! So I had to make a full quality DV from that, and then re-import into FCP. How is it that it's fine on the the camera, but then goes 'off sync' when being imported into FCP, even though all of the other imported dances were fine? Any ideas/suggestions would be most helpful, thank you.

When you say off do you mean out of sync?
There's really a thousand things it could be and nearly impossible to tell with just a post. What version of FCP? What computer? What OS? What kind of drives are you using? What are you settings? How are you viewing? What capture settings did you use?
See lots of stuff. With DV, if it's out of sync changes are you have some kind of hardware issue going on as it doesn't take much computer power to edit DV.

When watching a movie in Itunes the sound does not match the lips

when watching a movie in Itunes the sound does not match the lips, is this normal? & If I purchase a movie will it play like a normal dvd?

Try the suggestions in this thread.

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?
Movie details
QuickTime Movie
Size: 17.95 GB
Duration 17:39
2 audio channels
Codecs- Linear PCM, Apple ProRes 422, Timecode
Thanks!!

You can't use iMovie to create a video DVD - for that you need iDVD:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

HT1390 I RENTED A MOVIE & HAD IT SENT TO MY COMPUTER THE MOVIE KEEPS BREAKING UP THE SOUND DOSE NOT MATCH THE PICTURE WHATS UP WITH THAT

movie is breaking up & sound dose not match picture ;plus I need to move the movie to another computer windows xp to windows 7

D3NC wrote:
Apple promotes the rental service as being able to allow viewers to watch, start/stop, content on all account related iOS devices.
It would be nice but I've never seen them explicitly advertise that.
Can I play my rental on more than one device?
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
from:
http://support.apple.com/kb/HT1657

Sound does not match video

I have imported an HD video from a Canon HV30 camcorder into iMovie HD 6.0.3. The picture looks great but the sound does not match the video. I have never encountered this problem before when importing from other video camcorders (non HD). Does anyone have any idea how to solve this problem? Thanks.

Hello, skidude23,
Welcome to the discussions.
Was the sound recorded in 12 bit instead of 16 bit?
You can fix this by extracting the audio from the video clips. Put your movie clips in the timeline, and put it in the 'timeline' vies.
Select the clip first, then go Advanced->extract audio. It may take a while, but you will then have the video clip on the video track, muted, with a separate audio track below it. You can then select 'show audio wave form' to see the audio waves and move the audio track slightly to get it synched with the video for that clip. When it is correct, do a 'Lock audio at playhead' to secure it.
Do this for each of your clips. If your clips are quite long, this extraction can take a very long time. That is why I said to do it one clip at a time, but that does get tedious.

Sound and picture did not match?

After recording the presentation it was OK and I could show it. But the fourth time I would show the presentation the sound and animation did not match the pictures? t.i. Keynote did not move to next picture (e.g. I was in picture No. 3 and it shoud move to next picture 4 but it doesn't - and the voice to the next picture No. 4 started continued in picture 3)
Why does this happened? Is Keynote not reliable?

If sound files and images are placed on the slide and timed using Inspector > Builds they will maintain the timing.
I have suggested to do that instead of using the recording feature built in to Keynote which has proven to be unreliable with large numbers of slides and longer voice overs.
Switching to using builds will eliminate these errors.

HT1551 sound and picture do not match

Certain movies on Netflix, when played, the sound and picture do not match. It looks like a voice over. You see lips move to the wrong voice.

various. I have some of my dvds that i converted plus numerous others bought off itunes store. the problem seems fairly reccurrrent over all videos?

How to match sound track to movie pictures? (the sound track is shorter)

I have a sound (narrative) track of approx 1 hr which talks about the movie film. However the film I have, is a slightly different version, that is about 10 min longer then the sound track and I would like to restore the match, e.g. by something like cutting the sound track and inserting blanks, or cutting and moving the sound a couple of seconds. Note I'm totally new to Premiere V 10. I presume I would have to use start and end marks in the sound track and place the subsequent sound parts on a new sound (or narrative?) track (but it seems I will need to introduce additional silent parts, I cannot just move (drag?) the next sound track a couple of seconds to the left.
I would guess there are a couple of easy tricks to achieve my goal.
Thank you in advice.
Rob Tausk

Well well: not easy nor trivial at all, but I haven’t given up as yet! I’ll describe my workflow below.
1.       Play video fragment, and comparing film picture and sound estimate position where I need to introduce a silent period and it length.
2.       By double click play sound “comment track” on the monitor and set end stop (I would actually prefer if the sound track could be zoomed to more easily/accurately find best position)
3.       Play mute sound clip in preview and set time length with end stop and close preview
4.       Move mute clip to comment track, which has been shortened in step 2
5.       Play main sound clip in Preview and set start point
6.       Move this sound clip to comment track.
But sometime things go slightly wrong, e.g. when moving mute or sound fragment to “comment track” I find that the video track cuts (not intended)
Another difficulty I still need to master is related to the phenomena you mentioned before, related to moving sound clips, parts which were before the starting point show up (e.g. drag edges).
I hope you can roughly follow my explanatory story (I realise writing such workflow is difficult and critically depends on the same use of words concepts definitions and jargon (note my Adobe Premiere Elements is in Dutch).
I’d much appreciate your comments (maybe another software would be friendly to the inexperienced senior citizen)
Van: A.T. Romano
Verzonden: woensdag 23 juli 2014 18:37
Aan: Robert Tausk
Onderwerp: How to match sound track to movie pictures? (the sound track is shorter)
How to match sound track to movie pictures? (the sound track is shorter)
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/6576612#6576612>

When a video is taken in Photo Booth, the sound does not match up

When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?

Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium

Sound does not match image - ????

I am now having the same problem with my mac mini that I was having with my G4 powerbook.
When in imovie I choose share and then videocamera and send the movie to a video camera, sometimes the voice of the person speaking does not match the lips.
Usually if I do a restart, and make the same movements then it will work okay.
The camera is a JVC.
Any ideas???

Robert,
Try these fixes in iMovie before going to iDVD,
b even if the problem only occurs after burning
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
John

In AE CS6, the sound does not match with video

Hi,
I would like to ask a question. I have AE CS6, and I recorded a gameplay video with Avermedia Live Gamer HD. The format of this video is .mp4. When I import the .mp4 into the program, the sound does not match. On the original video, when i play with VLC or WMP, all things are good, and when i import, the sound does not good. What causes this problem, and can I do something to solve this?
Thanks the answers, R3dLinE

Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium

Sound not matching movies

Similar Messages

Maybe you are looking for