Sound not very loud help please:/

I got myself a new iPod Nano 6th gen to replace my quite old iPod touch and my problem is this when adjusting the volume I get about halfway through and even if i continue to increase the volume to full its no louder than halfway up I checked the volume limit and thats full too. The volume level on my old iPod touch is much louder than my nano so Im tempted to return my new nano and just struggle with battery life on my Ipod touch. I know it cant be my headphones either because I invested in some beats by dr dre can anyone help me please?

First of all, "investing" is not the word I would use on Beats.
Secondly, have you looked at:
Volume limit in iTunes
EQ is set correctly
Soundcheck is on/off
Audio leveling is on for the specific song?

Similar Messages

Ipod sound not very loud...

Bought Dad a Ipod for his birthday about a year and a half ago. He takes excellent care of it. He has always complained that it didn't get as loud as his stereo did - we chalked it up to user error. Today, I finally looked at it and there is definately something not right with it.
Regardless of what the ipod is hooked up to (stereo, car radio, etc.) the volume on the "stereo" needs to be turned almost all the way up just to hear the ipod at a "normal" level. A cd, or the radio at that volume would blow the speakers. I tried turning up the volume on the ipod itself, but it doesn't matter if it is turned all the way up or way down there is no sound change what so ever. I clicked through some of the EQ's but sound didn't change at all then either.
Any ideas what the problem could be? In my opinion it is not very old to be having such problems - espeically when he says its been like this from the start.

Get the latest version of the iPod firmware. Hold down MENU to go back to the Main Menu. Go to Settings > Volume Limit. Adjust accordingly.

Sound NOT Very Loud-why?

I love my new MacBook. However, they put the 2 speakers in the back facing out and the sound volume is VERY low. Watched a DVD in my lap with the volume all the way up and could hardly hear the movie. Everything is hard to hear on this machine. Don't know if it's the location of the speakers or not. Of course I didn't buy it for the sound BUT I never have had a laptop this hard to hear before.

I think quite a number of people, myself included, are having this problem. I sincerely hope Apple fixes this - and soon. My previous computer, a Powerbook G4 15", would never win any awards for fidelity but it was plenty loud enough.
In all environments other than a quite room, the volume on my machine, even set to near maximum, is not acceptable.
Macbook 1.83 Ghz - 2 Gig RAM Mac OS X (10.4.6)

IS THERE A WAY OF INCREASING THE VOLUME ON A USB DOWNLOADED WITH I TUNES? WHEN I PLAY MUSIC FROM IT IN MY BMW IT IS NOT VERY LOUD.

IS THERE A WAY OF INCREASING THE VOLUME ON A THUMB DRIVE DOWNLOADED WITH ITUNES MUSIC? WHEN PLAYBACK ON BMW RADIO, EVEN WITH THE RADIO VOLUME AT MAX, MUSIC IS NOT VERY LOUD.

Can't answer the query, since I don't use thumb drives and my volume's very responsive. That said, please don't post using ALL CAPS. That's considered shouting and is very disconcerting.

Itunes converrts videos for ipod but then thay have no SOUND!!! Help please

Itunes converrts videos for ipod but then thay have no SOUND!!! Help please
Just bought it a couple of days ago, and its doing this!!! why doed the videos now both on my ipod and itunes not have sound?

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

Rebuild screen freeze - unable to update firmware as not docking. Help please

Hello, I've got an 8gb Zen.
Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
Ran scandisk on it - no joy.
Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
Any help appreciated. Thank you

QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

Z800 fans sound is very loud

hi dear
i have HP Z800 machine and its great for my graphic desgin , but i have a problem about noise the fans sound is very loud
please do you have any idea for fix ?
thanks

Have you tried selecting fan speeds in CMOS setup? (reboot and press F10)
Have you inspected ambient temperature sensor via HWMonitor?

My macbook pro is not charging - any help please!?

My macbook pro is not charging - any help please!?
<Edited by Host>

Hi sdennisonta,
If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: All about batteries - Apple Support
If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
Apple Portables: Troubleshooting MagSafe adapters - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

On my older I-MAC (2005) the computer turns on, but all I see is a grey screen with a small file that has a question mark and smiling FINDER face on it. Then the fan comes on and becomes very loud. Please help...

My older I-MAC gives me a grey screen and flashes a question mark and smiling FINDER face inside a FILE icon. Then the fan begins to run and becomes very loud...and thats as far as it will let me go.

See KB Articles: http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or kernel panic when computer starts
http://docs.info.apple.com/article.html?artnum=31355 Mac OS: Flashing Globe When Computer Turns On or A folder that has an alternating flashing question mark
http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).

IMessage and FaceTime not working, Urgent Help please!!!

Hi guys,
Need help urgently, my iMessage and FaceTime are both not working on my Macbook Pro.
The iMessage gives giving this message "Could not sign in. Please check your network connection and try again.", while FaceTime just simply cannot login.
Please help!!!

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Requested #571 Delivery not authorized. Help, please.

Our Exchange 2010 SP3 was working just fine and suddenly we are receiving this error:
Requested rejected your message to the following e-mail addresses:
UserName ([email protected])
Requested gave this error:
Delivery not authorized, message refused
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
UserName ([email protected])
Requested gave this error:
Delivery not authorized, message refused
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: ServerName.local (This is our Exchange 2010 SP3)
[email protected]
Requested #571 Delivery not authorized, message refused ##
[email protected]
Requested #571 Delivery not authorized, message refused ##
Original message headers:
Received: from servername.local ([::1]) by servername.local ([::1])
with mapi id 14.03.0123.003; Tue, 22 Apr 2014 13:20:32 -0400
From: Local User < [email protected]
>
To: UserName < [email protected]
>
CC: " UserName (< [email protected])"
<< [email protected]
>, =?iso-8859-1?Q?Alberto_=C1lvarez?=
<< [email protected]
>
Subject: SUBJECT
Thread-Topic: SUBJECT
Thread-Index: Ac9eTq/lS/F9XskPTH2inWLJxOCgog==
Date: Tue, 22 Apr 2014 17:20:32 +0000
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [172.16.100.24]
Content-Type: multipart/alternative;
boundary="_000_92532CAA9EA66B44BE9722487825CFCE67B6723ESERVERNAME_"
MIME-Version: 1.0
Our IP is not blacklisted. This is the only unusual thing we found:
What else can we check?
Thanks in advanced

Hi,
I recommend you check Ed's suggestions. From the error message, it said that the SPF record couldn’t be found. SPF records work with sender ID filtering to stop malicious e-mails. The SPF record is a piece of information on the DNS servers that is required
by sender ID filtering to determine whether the e-mail message was sent by an authorized server for the specified domain. For more information about sender ID filtering, you can refer to the following article.
Sender ID Filtering
http://technet.microsoft.com/en-us/library/cc526541.aspx
About these pictures that can help us, they are not very clear. In order to troubleshoot this issue more efficiently, I recommend you post the error message included in these pictures here for further research.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

My printer -photosmart plus B210a prints but the photos are very very dark HELP please

I have a Hp photosmart plus B210a just trying to print out some photos and they are very very dark The photos themselves are light and of a high Dpi any suggestions anyone ??? please they are of my son's wedding so are very important to me

What program are you printing from? What operating system? What are the printer settings for paper type and quality?
If you are printing from a program that allows selection of CMYK or RGB printing then select the RGB setting. Even though the inks are CMYK the driver is expecting RGB data.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

SB X-fi Xtreme Audio PCI-E Not working correctly help please

Hi i have a SB X-fi Xtreme Audio PCI-E card on my pc , i have currently installed windows 7 and for months now i am trying to make the card work .. I have a poor sound especially when there is bass, the card is not detected by windows 7, its detected as a high definition audio device , when i plug my mic is not found..and i cant use the creative applications because is says its not supported or i have no creative poroducts on my pc ... I have tried all the latest drivers and stil have the same problem.. HELP PLEASE !!

First, uninstall all creative drivers, console, from add/remove. Restart computer install: . X-Fi Xtreme Audio Series Driver .04.0000 from creative website. 2.X-Fi Xtreme Audio Pack .03.0002 from creative website. 3. install Creative Console from here: http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 * PAX Console, Modded Original Console, but newer then Creative) or this creative console: CSL_PCAPP_LB_2_6_09.exe ( it creative original console) With this console you will have bass, treble, etc, BUT you need to open ConsoLCu.exe from Program Files/Creative/Console Launcher. ConsoLCu.exe have all the options you need. Creative forget about thier sound board, thier drivers, bass, treble, etc, about customers. If you install thier drivers from their website you will not have BASS, and also an crappy sound. You need to install Creative Console from google, or from http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 to have bass, crystalizer, etc. I also have Creative Audio PCI-e board..... crappy chipset, just like Sb Li've 24 biti PCI.

Macbook Shuts Down Very Very Slowly - Help please :(

Hi, my Macbook (Snow Leopard) has been able to shut down very quickly since I purchased Snow Leopard. However, just a few days back, it started to shut down very very slowly, often "lagging" or being "stuck" at a blue page before it actually switches itself off. I checked Console & thought these messages could probably be the reason why. But then again, I deleted iAntiVirus and such messages continue to appear.
Can anyone help please? Thanks
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d09b0: pointer being freed was not allocated
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d09d0: pointer being freed was not allocated
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0740: pointer being freed was not allocated
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0a60: pointer being freed was not allocated
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d09f0: pointer being freed was not allocated
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0b90: pointer being freed was not allocated
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0c70: pointer being freed was not allocated
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus * set a breakpoint in mallocerrorbreak to debug
1/25/10 PM 11:01:26 [0x0-0xe00e].com.pctools.iAntiVirus iavd(236,0xb0081000) malloc: * error for object 0x12d0d00: pointer being freed was not allocated

Hi,
I removed it already, though I am not sure whether or not some parts of it might be around.

When I try to sync my I phone 4 to my mac air it won't show up only my iPad not the phone help please

When I try to sync my iphone to Itunes on my mac air ti will not come up
My ipad works ok but not the phone help please

Hello Canonball,
It sounds like your iPhone is not showing in iTunes so it will not sync, but your iPad works fine. If you have already restarted your phone, (Turn your iOS device off and on (restart) and reset, http://support.apple.com/kb/ht1430), I recommend the troubleshooting from the following article named:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Sound not very loud help please:/

Similar Messages

Maybe you are looking for